Search

We report an improved measurement of the degree-scale cosmic microwave background B-mode angular-power spectrum over 670 deg2 sky area at 150 GHz with Polarbear. In the original analysis of the data, errors in the angle measurement of the continuously rotating half-wave plate, a polarization modulator, caused significant data loss. By introducing an angle-correction algorithm, the data volume is increased by a factor of 1.8. We report a new analysis using the larger data set. We find the measured B-mode spectrum is consistent with the ΛCDM model with Galactic dust foregrounds. We estimate the contamination of the foreground by cross-correlating our data and Planck 143, 217, and 353 GHz measurements, where its spectrum is modeled as a power law in angular scale and a modified blackbody in frequency. We place an upper limit on the tensor-to-scalar ratio r < 0.33 at 95% confidence level after marginalizing over the foreground parameters.

We report a measurement of the E-mode polarization power spectrum of the cosmic microwave background (CMB) using 150 GHz data taken from 2014 July to 2016 December with the POLARBEAR experiment. We reach an effective polarization map noise level of 32 mK-arcmin across an observation area of 670 square degrees. We measure the EE power spectrum over the angular multipole range 500 ≤ ℓ < 3000, tracing the third to seventh acoustic peaks with high sensitivity. The statistical uncertainty on E-mode bandpowers is ∼2.3 μK2 at ℓ ∼ 1000, with a systematic uncertainty of 0.5 mK2. The data are consistent with the standard ΛCDM cosmological model with a probability-to-exceed of 0.38. We combine recent CMB E-mode measurements and make inferences about cosmological parameters in ΛCDM as well as in extensions to ΛCDM. Adding the ground-based CMB polarization measurements to the Planck data set reduces the uncertainty on the Hubble constant by a factor of 1.2 to H0 = 67.20 ±0.57 km s- Mpc- 1 1. When allowing the number of relativistic species (Neff ) to vary, we find Neff = 2.94 ±0.16, which is in good agreement with the standard value of 3.046. Instead allowing the primordial helium abundance (YHe) to vary, the data favor YHe = 0.248 ±0.012. This is very close to the expectation of 0.2467 from big bang nucleosynthesis. When varying both YHe and Neff , we find Neff = 2.70 ±0.26 and YHe = 0.262 ±0.015.

We present a measurement of the B-mode polarization power spectrum of the cosmic microwave background (CMB) using data taken from 2014 July to 2016 December with the Polarbear experiment. The CMB power spectra are measured using observations at 150 GHz with an instantaneous array sensitivity of NETarray=23μ K√s on a 670 square degree patch of sky centered at (R.A., decl.) = (+0h12m0s, -59°18′). A continuously rotating half-wave plate is used to modulate polarization and to suppress low-frequency noise. We achieve 32 μK arcmin effective polarization map noise with a knee in sensitivity of ℓ = 90, where the inflationary gravitational-wave signal is expected to peak. The measured B-mode power spectrum is consistent with a ΛCDM lensing and single dust component foreground model over a range of multipoles 50 ≤ ℓ ≤ 600. The data disfavor zero CℓBB at 2.2σ using this ℓ range of Polarbear data alone. We cross-correlate our data with Planck full mission 143, 217, and 353 GHz frequency maps and find the low-ℓ B-mode power in the combined data set to be consistent with thermal dust emission. We place an upper limit on the tensor-to-scalar ratio r < 0.90 at the 95% confidence level after marginalizing over foregrounds.

We present a measurement of the gravitational lensing deflection power spectrum reconstructed with two seasons of cosmic microwave background polarization data from the Polarbear experiment. Observations were taken at 150 GHz from 2012 to 2014 and surveyed three patches of sky totaling 30 square degrees. We test the consistency of the lensing spectrum with a cold dark matter cosmology and reject the no-lensing hypothesis at a confidence of 10.9σ, including statistical and systematic uncertainties. We observe a value of A L = 1.33 ± 0.32 (statistical) ±0.02 (systematic) ±0.07 (foreground) using all polarization lensing estimators, which corresponds to a 24% accurate measurement of the lensing amplitude. Compared to the analysis of the first-year data, we have improved the breadth of both the suite of null tests and the error terms included in the estimation of systematic contamination.

Using only cosmic microwave background polarization data from the polarbear experiment, we measure B-mode polarization delensing on subdegree scales at more than 5σ significance. We achieve a 14% B-mode power variance reduction, the highest to date for internal delensing, and improve this result to 22% by applying for the first time an iterative maximum a posteriori delensing method. Our analysis demonstrates the capability of internal delensing as a means of improving constraints on inflationary models, paving the way for the optimal analysis of next-generation primordial B-mode experiments.

Akio Onishi,1 Yayoi Matsumura-Kimoto,1,2 Shinsuke Mizutani,1 Taku Tsukamoto,1 Takahiro Fujino,1 Akihiro Miyashita,1,3 Daichi Nishiyama,4 Kazuho Shimura,5 Hiroto Kaneko,5 Eri Kawata,6 Ryoichi Takahashi,7 Tsutomu Kobayashi,1,8 Hitoji Uchiyama,8 Nobuhiko Uoshima,3 Yoko Nukui,9 Yuji Shimura,1 Tohru Inaba,9 Junya Kuroda1 1Division of Hematology and Oncology, Department of Medicine, Kyoto Prefectural University of Medicine, Kyoto, Japan; 2Department of Hematology, Japan Community Health Care Organization Kyoto Kuramaguchi Medical Center, Kyoto, Japan; 3Department of Hematology, Japanese Red Cross Kyoto Daini Hospital, Kyoto, Japan; 4Department of Hematology, Fukuchiyama City Hospital, Fukuchiyama, Japan; 5Department of Hematology, Aiseikai Yamashina Hospital, Kyoto, Japan; 6Department of Hematology, Matsushita Memorial Hospital, Moriguchi, Japan; 7Department of Hematology, Omihachiman Community Medical Center, Omihachiman, Japan; 8Department of Hematology, Japanese Red Cross Kyoto Daiichi Hospital, Kyoto, Japan; 9Division of Infection Control & Molecular Laboratory Medicine, Department of Medicine, Kyoto Prefectural University of Medicine, Kyoto, JapanCorrespondence: Junya Kuroda, Division of Hematology and Oncology, Department of Medicine, Kyoto Prefectural University of Medicine, 465 Kajii-cho, Kamigyo-ku, Kyoto, 602-8566, Japan, Tel +81-75-251-5740, Fax +81-75-251-5743, Email junkuro@koto.kpu-m.ac.jpBackground and Purpose: Anti-CD20 monoclonal antibodies (MoAbs), rituximab (RIT), and obinutuzumab (OBZ) are the central components of immunochemotherapy for B-cell lymphoma (BCL). However, these agents potentially cause B-cell depletion, resulting in the impairment of antibody (Ab) production. During the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic, the optimal prediction of Ab response against anti–SARS-CoV-2 vaccination is critically important in patients with BCL treated by B-cell depletion therapeutics to prevent coronavirus disease 2019 (COVID-19).Patients and Methods: We investigated the effect of using RIT and/or OBZ on the Ab response in 131 patients with various types of BCL who received the second SARS-CoV-2 mRNA vaccine either after, during, or before immunochemotherapy containing B-cell–depleting moiety between June and November 2021 at seven institutes belonging to the Kyoto Clinical Hematology Study Group. The SARS-Cov-2 neutralizing Ab (nAb) was measured from 14 to 207 days after the second vaccination dose using the iFlash3000 automatic analyzer and the iFlash-2019-nCoV Nab kit.Results: Among 86 patients who received the vaccine within 12 months after B-cell depletion therapy, 8 (9.3%) were seropositive. In 30 patients who received the vaccine after 12 months from B-cell depletion therapy, 22 (73%) were seropositive. In 15 patients who were subjected to B-cell depletion therapy after vaccination, 2 (13%) were seropositive. The multivariate analysis indicated that an interval of 12 months between B-cell depletion therapy and the subsequent vaccination was significantly associated with effective Ab production. Receiver operating characteristic curve analysis identified the optimal threshold period after anti-CD20 MoAb treatment, which determines the seropositivity against SARS-CoV-2, to be 342 days.Conclusion: The use of anti-CD20 MoAb within 12 months before vaccination is a critical risk for poor Ab response against anti–SARS-CoV-2 vaccination in patients with BCL.Keywords: COVID-19, vaccine, B-cell lymphoma, anti-CD20 monoclonal antibody

Inflation is the leading theory of the first instant of the universe. Inflation, which postulates that the universe underwent a period of rapid expansion an instant after its birth, provides convincing explanation for cosmological observations. Recent advancements in detector technology have opened opportunities to explore primordial gravitational waves generated by the inflation through “B-mode” (divergent-free) polarization pattern embedded in the cosmic microwave background anisotropies. If detected, these signals would provide strong evidence for inflation, point to the correct model for inflation, and open a window to physics at ultra-high energies. LiteBIRD is a satellite mission with a goal of detecting degree-and-larger-angular-scale B-mode polarization. LiteBIRD will observe at the second Lagrange point with a 400 mm diameter telescope and 2622 detectors. It will survey the entire sky with 15 frequency bands from 40 to 400 GHz to measure and subtract foregrounds. The US LiteBIRD team is proposing to deliver sub-Kelvin instruments that include detectors and readout electronics. A lenslet-coupled sinuous antenna array will cover low-frequency bands (40–235 GHz) with four frequency arrangements of trichroic pixels. An orthomode-transducer-coupled corrugated horn array will cover high-frequency bands (280–402 GHz) with three types of single frequency detectors. The detectors will be made with transition edge sensor (TES) bolometers cooled to a 100 milli-Kelvin base temperature by an adiabatic demagnetization refrigerator. The TES bolometers will be read out using digital frequency multiplexing with Superconducting QUantum Interference Device (SQUID) amplifiers. Up to 78 bolometers will be multiplexed with a single SQUID amplifier. We report on the sub-Kelvin instrument design and ongoing developments for the LiteBIRD mission.

The high-frequency telescope for LiteBIRD is designed with refractive and reflective optics. In order to improve sensitivity, this paper suggests the new optical configurations of the HFT which have approximately 7 times larger focal planes than that of the original design. The sensitivities of both the designs are compared, and the requirement of anti-reflection (AR) coating on the lens for the refractive option is derived. We also present the simulation result of a sub-wavelength AR structure on both surfaces of silicon, which shows a band-averaged reflection of 1.1–3.2% at 101–448 GHz.

Chika Maekura,1 Ayako Muramatsu,1 Hiroaki Nagata,1 Haruya Okamoto,1 Akio Onishi,1 Daishi Kato,1 Reiko Isa,1 Takahiro Fujino,1 Taku Tsukamoto,1 Shinsuke Mizutani,1 Yuji Shimura,1,2 Tsutomu Kobayashi,1 Keita Okumura,3 Tohru Inaba,4 Yoko Nukui,4 Junya Kuroda1 1Division of Hematology and Oncology, Department of Medicine, Kyoto Prefectural University of Medicine, Kyoto, Japan; 2Department of Blood Transfusion, University Hospital, Kyoto Prefectural University of Medicine, Kyoto, Japan; 3Faculty of Clinical Laboratory, University Hospital, Kyoto Prefectural University of Medicine, Kyoto, Japan; 4Department of Infection Control & Laboratory Medicine, Kyoto Prefectural University of Medicine, Kyoto, JapanCorrespondence: Junya Kuroda, Division of Hematology and Oncology, Department of Medicine, Kyoto Prefectural University of Medicine, 465 Kajii-cho, Kamigyo-ku, Kyoto, 602-8566, Japan, Tel +81 75 251 5740, Fax +81 75 251 5743, Email junkuro@koto.kpu-m.ac.jpAbstract: Previous studies have demonstrated that the appropriate production of serum anti-severe acute respiratory syndrome coronavirus 2 (SARS-Cov-2) neutralizing antibody (nAb) plays a critical role in the recovery from coronavirus disease 2019 (COVID-19); however, the role of nAb production in the recovery from a flare-up of chronic immune thrombocytopenia (ITP) has been unknown. We here report the first retrospectively investigated case of serum anti-SARS-Cov-2 nAb production during chronic ITP flare-up triggered by COVID-19. A 79-year-old woman with a history of corticosteroid-refractory ITP visited our hospital complaining of fever, cough, and sore throat for 4 days. Although chronic ITP was controlled by 12.5 mg of eltrombopag (EPAG) every other day, laboratory tests showed a decreased peripheral blood platelet count of 15.0 × 109/L, which indicated worsening thrombocytopenia. Meanwhile, PCR testing of a nasopharyngeal swab revealed that the patient was positive for SARS-Cov-2, and a computed tomography scan revealed bilateral pneumonia. On the basis of the flare-up of chronic ITP associated with COVID-19 pneumonia which was determined as a moderately severe status according to the WHO clinical progression scale, intravenous immunoglobulin therapy for 5 days (days 0– 4) and antiviral therapy were added on top of EPAG, which only resulted in a transient increase in the platelet count for several days. After decreasing to 8.0 × 109/L on day 13, the platelet count increased from day 16, coinciding with a positive detection for serum nAb against SARS-Cov-2. Although the increased dose up to 50 mg/day of EPAG was challenged during the clinical course, rapid dose reduction did not cause another relapse. In addition, no thrombotic or bleeding event was seen. These collectively suggest the vital role of the production of anti-SARS-Cov-2 nAb and improvement of clinical symptoms for recovery from a flare-up of chronic ITP in our case.Keywords: chronic immune thrombocytopenia, COVID-19, flare, neutralizing antibody

A continuously rotating half-wave plate (CRHWP) is a promising tool to improve the sensitivity to large angular scales in cosmic microwave background (CMB) polarization measurements. With a CRHWP, single detectors can measure three of the Stokes parameters, I, Q and U, thereby avoiding the set of systematic errors that can be introduced by mismatches in the properties of orthogonal detector pairs. We focus on the implementation of CRHWPs in large aperture telescopes (i.e. the primary mirror is larger than the current maximum half-wave plate diameter of ∼0.5 m), where the CRHWP can be placed between the primary mirror and focal plane. In this configuration, one needs to address the intensity to polarization (I→P) leakage of the optics, which becomes a source of 1/f noise and also causes differential gain systematics that arise from CMB temperature fluctuations. In this paper, we present the performance of a CRHWP installed in the {\scshape Polarbear} experiment, which employs a Gregorian telescope with a 2.5 m primary illumination pattern. The CRHWP is placed near the prime focus between the primary and secondary mirrors. We find that the I→P leakage is larger than the expectation from the physical properties of our primary mirror, resulting in a 1/f knee of 100 mHz. The excess leakage could be due to imperfections in the detector system, i.e. detector non-linearity in the responsivity and time-constant. We demonstrate, however, that by subtracting the leakage correlated with the intensity signal, the 1/f noise knee frequency is reduced to 32 mHz (ℓ ∼ 39 for our scan strategy), which is very promising to probe the primordial B-mode signal. We also discuss methods for further noise subtraction in future projects where the precise temperature control of instrumental components and the leakage reduction will play a key role.

We present an overview of the design and status of the Polarbear-2 and the Simons Array experiments. Polarbear-2 is a cosmic microwave background polarimetry experiment which aims to characterize the arc-minute angular scale B-mode signal from weak gravitational lensing and search for the degree angular scale B-mode signal from inflationary gravitational waves. The receiver has a 365 mm diameter focal plane cooled to 270 mK. The focal plane is filled with 7588 dichroic lenslet–antenna-coupled polarization sensitive transition edge sensor (TES) bolometric pixels that are sensitive to 95 and 150 GHz bands simultaneously. The TES bolometers are read-out by SQUIDs with 40 channel frequency domain multiplexing. Refractive optical elements are made with high-purity alumina to achieve high optical throughput. The receiver is designed to achieve noise equivalent temperature of 5.8 μ KCMBs in each frequency band. Polarbear-2 will deploy in 2016 in the Atacama desert in Chile. The Simons Array is a project to further increase sensitivity by deploying three Polarbear-2 type receivers. The Simons Array will cover 95, 150, and 220 GHz frequency bands for foreground control. The Simons Array will be able to constrain tensor-to-scalar ratio and sum of neutrino masses to σ(r) = 6 × 10 - 3 at r= 0.1 and ∑ mν(σ= 1) to 40 meV.

LiteBIRD is a proposed CMB polarization satellite project to probe the inflationary B-mode signal. The satellite is designed to measure the tensor-to-scalar ratio with a 68 % confidence level uncertainty of σr< 10 - 3, including statistical, instrumental systematic, and foreground uncertainties. LiteBIRD will observe the full sky from the second Lagrange point for 3 years. We have a focal plane layout for observing frequency coverage that spans 40–402 GHz to characterize the galactic foregrounds. We have two detector candidates, transition-edge sensor bolometers and microwave kinetic inductance detectors. In both cases, a telecentric focal plane consists of approximately 2 × 10 3 superconducting detectors. We will present the mission overview of LiteBIRD, the project status, and the TES focal plane layout.

The Simons Array is a next generation cosmic microwave background (CMB) polarization experiment whose science target is a precision measurement of the B-mode polarization pattern produced both by inflation and by gravitational lensing. As a continuation and extension of the successful POLARBEAR experimental program, the Simons Array will consist of three cryogenic receivers each featuring multichroic bolometer arrays mounted onto separate 3.5m telescopes. The first of these, also called POLARBEAR-2A, will be the first to deploy in late 2016 and has a large diameter focal plane consisting of dual-polarization dichroic pixels sensitive at 95 GHz and 150 GHz. The POLARBEAR-2A focal plane will utilize 7,588 antenna-coupled superconducting transition edge sensor (TES) bolometers read out with SQUID amplifiers using frequency domain multiplexing techniques. The next two receivers that will make up the Simons Array will be nearly identical in overall design but will feature extended frequency capability. The combination of high sensitivity, multichroic frequency coverage and large sky area available from our mid-latitude Chilean observatory will allow Simons Array to produce high quality polarization sky maps over a wide range of angular scales and to separate out the CMB B-modes from other astrophysical sources with high fidelity. After accounting for galactic foreground separation, the Simons Array will detect the primordial gravitational wave B-mode signal to r > 0.01 with a significance of > 5σ and will constrain the sum of neutrino masses to 40 meV (1σ) when cross-correlated with galaxy surveys. We present the current status of this funded experiment, its future, and discuss its projected science return.

Low-power (from the sub-kilowatt range up to a few kilowatts) inductively coupled plasma (ICP) electrothermal thrusters for space propulsion are potential alternatives to low-power arcjet thrusters, which are often implemented on geostationary satellites for north–south station keeping. We develop an axisymmetric two-dimensional magnetohydrodynamic (MHD) numerical simulation technique using a two-temperature plasma model as a computer-aided engineering tool for low-power argon ICP electrothermal thrusters. Furthermore, to the best of our knowledge, this is the first study to provide a basic understanding of the plasma-fluid characteristics of low-power ICP electrothermal thrusters. To this end, we perform the MHD numerical simulation for a low-power argon ICP electrothermal thruster model that was developed for thrust measurement experiments to validate the proposed numerical simulation technique. The numerical results indicate that the plasma flow produced in the low-power argon ICP electrothermal thruster model is basically in a strongly thermal and ionizing nonequililbrium state. In addition, the numerical results show that the experimentally measured thrust forces can be reproduced with an underestimation of 10% or less over the RF input power range of 0–0.6 kW considered in the experiment. Moreover, the numerical results suggest that the main reason why the performance of the low-power argon ICP electrothermal thruster model is significantly lower than the target performance is the considerable heat loss of more than 90% of the input power through the flow-channel wall. [ABSTRACT FROM AUTHOR]