Search

In situ heart valve tissue engineering is an emerging approach in which resorbable, off-the-shelf available scaffolds are used to induce endogenous heart valve restoration. Such scaffolds are designed to recruit endogenous cells in vivo, which subsequently resorb polymer and produce and remodel new valvular tissue in situ. Recently, preclinical studies using electrospun supramolecular elastomeric valvular grafts have shown that this approach enables in situ regeneration of pulmonary valves with long-term functionality in vivo. However, the evolution and mechanisms of inflammation, polymer absorption and tissue regeneration are largely unknown, and adverse valve remodeling and intra- and inter-valvular variability have been reported. Therefore, the goal of the present study was to gain a mechanistic understanding of the in vivo regenerative processes by combining routine histology and immunohistochemistry, using a comprehensive sheep-specific antibody panel, with Raman microspectroscopy for the spatiotemporal analysis of in situ tissue-engineered pulmonary valves with follow-up to 24 months from a previous preclinical study in sheep. The analyses revealed a strong spatial heterogeneity in the influx of inflammatory cells, graft resorption, and foreign body giant cells. Collagen maturation occurred predominantly between 6 and 12 months after implantation, which was accompanied by a progressive switch to a more quiescent phenotype of infiltrating cells with properties of valvular interstitial cells. Variability among specimens in the extent of tissue remodeling was observed for follow-up times after 6 months. Taken together, these findings advance the understanding of key events and mechanisms in material-driven in situ heart valve tissue engineering. Statement of significance This study describes for the first time the long-term in vivo inflammatory and regenerative processes that underly in situ heart valve tissue engineering using resorbable synthetic scaffolds. Using a unique combinatorial analysis of immunohistochemistry and Raman microspectroscopy, important spatiotemporal variability in graft resorption and tissue formation was pinpointed in in situ tissue-engineered heart valves, with a follow-up time of up to 24 months in sheep. This variability was correlated to heterogenous regional cellular repopulation, most likely instigated by region-specific differences in surrounding tissue and hemodynamics. The findings of this research contribute to the mechanistic understanding of in situ tissue engineering using resorbable synthetics, which is necessary to enable rational design of improved grafts, and ensure safe and robust clinical translation.

The host immune response to an implanted biomaterial, particularly the phenotype of infiltrating macrophages, is a key determinant of biocompatibility and downstream remodeling outcome. The present study used a subcutaneous rat model to compare the tissue response, including macrophage phenotype, remodeling potential, and calcification propensity of a biologic scaffold composed of glutaraldehyde-fixed bovine pericardium (GF-BP), the standard of care for heart valve replacement, with those of an electrospun polycarbonate-based supramolecular polymer scaffold (ePC-UPy), urinary bladder extracellular matrix (UBM-ECM), and a polypropylene mesh (PP). The ePC-UPy and UBM-ECM materials induced infiltration of mononuclear cells throughout the thickness of the scaffold within 2 days and neovascularization at 14 days. GF-BP and PP elicited a balance of pro-inflammatory (M1-like) and anti-inflammatory (M2-like) macrophages, while UBM-ECM and ePC-UPy supported a dominant M2-like macrophage phenotype at all timepoints. Relative to GF-BP, ePC-UPy was markedly less susceptible to calcification for the 180 day duration of the study. UBM-ECM induced an archetypical constructive remodeling response dominated by M2-like macrophages and the PP caused a typical foreign body reaction dominated by M1-like macrophages. The results of this study highlight the divergent macrophage and host remodeling response to biomaterials with distinct physical and chemical properties and suggest that the rat subcutaneous implantation model can be used to predict in vivo biocompatibility and regenerative potential for clinical application of cardiovascular biomaterials.

© 2019 Wiley Periodicals, Inc. Saphenous vein graft (SVG) failure rates are unacceptably high, and external mechanical support may improve patency. We studied the histologic remodeling of a conformal, electrospun, polydimethylsiloxane-based polyether urethane external support device for SVGs and evaluated graft structural evolution in adult sheep to 2 years. All sheep (N = 19) survived to their intended timepoints, and angiography showed device-treated SVG geometric stability over time (30, 90, 180, 365, or 730 days), with an aggregated graft patency rate of 92%. There was minimal inflammation associated with the device material at all timepoints. By 180 days, treated SVG remodeling was characterized by minimal/nonprogressive intimal hyperplasia; polymer fragmentation and integration; as well as the development of a neointima, and a confluent endothelium. By 1-year, the graft developed a media-like layer by remodeling the neointima, and elastic fibers formed well-defined structures that subtended the neo-medial layer of the remodeled SVG. Immunohistochemistry showed that this neo-media was populated with smooth muscle cells, and the intima was lined with endothelial cells. These data suggest that treated SVGs were structurally remodeled by 180 days, and developed arterial-like features by 1 year, which continued to mature to 2 years. Device-treated SVGs remodeled into arterial-like conduits with stable long-term performance as arterial grafts in adult sheep.

Background Right ventricular outflow tract (RVOT) conduits used in children with congenital heart disease often degenerate rapidly or develop other complications, and they do not grow with the patient. This leads to multiple surgeries until adult-sized conduits can be implanted. We report experimental in vivo experience with an entirely synthetic absorbable graft, designed to be replaced by tissue in-vivo by host cells, in a process termed Endogenous Tissue Restoration (ETR), and to grow commensurate with somatic growth. Methods We characterized the structure, mechanical properties, biocompatibility, and in vivo remodelling of a bioabsorbable polyester based on the self-complementary ureido-pyrimidinone (UPy) quadruple hydrogen-bonding motif. Electrospinning was used to process the polymer into a tubular graft with a highly porous wall structure, which was implanted as a pulmonary artery interposition graft in 9 adult sheep with a maximum follow-up of 1 year, followed by pathologic and mechanical analysis. Results All grafts were patent by transthoracic echocardiography. Eight were intact at post-mortem examination. One graft had aneurysmal dilation. Graft polymer resorption in vivo was consistent among specimens. Histologic examination revealed progressive tissue replacement of graft polymer, ongoing at one year, with remodeling to a structure that had some key features of native vascular wall. Burst pressures for all explants at 8 weeks and beyond were higher than those of native pulmonary artery (PA) and largely determined by newly formed tissue. Conclusions Preclinical studies of a new, absorbable polymeric graft for PA replacement showed remodelling by endogenous cells up to one-year follow-up. Our results show that ETR leads to progressive and substantial replacement of an off-the-shelf synthetic bioabsorbable conduit by functional host tissue to one year in sheep. Thus, further development of this novel concept is warranted.

The use of bioprosthetic valves (BPV) implanted surgically or by transcatheter valve implantation (TAVI) has increased dramatically in recent years. Currently, BPVs comprise an overwhelming majorit...

In situ heart valve tissue engineering is an emerging approach in which resorbable, off-the-shelf available scaffolds are used to induce endogenous heart valve restoration. Such scaffolds are designed to recruit endogenous cells in vivo, which subsequently resorb polymer and produce and remodel new valvular tissue in situ. Recently, preclinical studies using electrospun supramolecular elastomeric valvular grafts have shown that this approach enables in situ regeneration of pulmonary valves with long-term functionality in vivo. However, the evolution and mechanisms of inflammation, polymer absorption and tissue regeneration are largely unknown, and adverse valve remodeling and intra- and inter-valvular variability have been reported. Therefore, the goal of the present study was to gain a mechanistic understanding of the in vivo regenerative processes by combining routine histology and immunohistochemistry, using a comprehensive sheep-specific antibody panel, with Raman microspectroscopy for the spatiotemporal analysis of in situ tissue-engineered pulmonary valves with follow-up to 24 months from a previous preclinical study in sheep. The analyses revealed a strong spatial heterogeneity in the influx of inflammatory cells, graft resorption, and foreign body giant cells. Collagen maturation occurred predominantly between 6 and 12 months after implantation, which was accompanied by a progressive switch to a more quiescent phenotype of infiltrating cells with properties of valvular interstitial cells. Variability among specimens in the extent of tissue remodeling was observed for follow-up times after 6 months. Taken together, these findings advance the understanding of key events and mechanisms in material-driven in situ heart valve tissue engineering.

The goal here is to two-fold: 1) describe how biological structure is adapted to perform physiologic function; this concept extends from cells (and their subcellular constituents) to the organization of tissues and organs. 2) introduce the physiologic responses to environmental stimuli, and the mechanisms of and responses to cell injury and implantation of biomaterials.

The chapters that comprise Part 3 of this text summarize key principles and provide a “toolkit” for medical device innovation. They discuss total product life cycle for medical devices, safety and risk management, sterilization and disinfection consideration, verification and validation, bench-to-bedside translation, regulatory pathways and constraints, role of standards for testing of biomaterials, implant retrieval, evaluation and analysis, and legal and ethical concerns over the use of biomaterials in medical devices.

Bioprostheses, composed of chemically treated animal tissue and termed heterografts or xenografts, are the most widely used type of substitute heart valve. Their major limitation is structural degeneration caused by calcification. Calcification following implantation occurs in a tissue made vulnerable to calcification by the chemical treatment and physical changes induced during valve fabrication and their consequences following implantation. Data from clinical valve explants and subdermal and circulatory experiments in animal models have elucidated the pathophysiology, earliest events, and determinants of this significant clinical problem. The primary mechanism of calcification appears to result from exposure of a susceptible substrate (with phosphoester-containing devitalized cells and cell fragments) to extracellular fluid rich in calcium. The key drivers are (1) biochemical environment, (2) implant structure and chemistry, both of which are prerequisite to calcification, and (3) mechanical stress, which accelerates site-specific mineralization. Therefore, the primary approaches to inhibiting the fundamental process of calcification target the processes involved in the nucleation of calcific deposits and thus have sought to remove cell-based phospholipids or otherwise alter the substrate.

Cardiovascular disease is the leading cause of mortality and morbidity globally. Several subtypes of cardiovascular disease require innovative surgical and interventional diagnostic and therapeutic procedures and devices which are composed of highly advanced biomaterials. The recognition and understanding of complications of these devices, many of them related to the biomaterials that comprise them, has led to iterative efforts to improve their performance and safety through biomaterials and device research and development which have been translated into better patient care. This chapter and the one following summarize key considerations in cardiovascular medical devices, including the underlying pathology of the conditions they are designed for and used to treat, relevant biomaterials of which they are fabricated, and the most important complications that need to be avoided, mitigated or managed. This chapter emphasizes biomaterials and engineering design issues relevant to cardiac valve prostheses, pacemakers and implantable cardioverter-defibrillators, implantable cardiac assist devices and artificial hearts, and miscellaneous intra-cardiac devices, including percutaneous catheter-based techniques to treat cardiovascular disease in a minimally invasive manner, such as septal defect closure devices, and left atrial occlusion devices. The following chapter discusses devices used for vascular repair and replacement (including vascular grafts and endovascular stents and stent grafts), filters to prevent pulmonary embolism, catheters and other cardiovascular devices that reside outside the heart.

Extra domain B of fibronectin (FN-EDB) is upregulated in the extracellular matrix during tissue remodeling and has been postulated as a potential biomarker for atherosclerosis, yet no systematic test for FN-EDB in plaques has been reported. We hypothesized that FN-EDB expression would intensify in advanced plaques. Furthermore, engineering of FN-EDB-targeted nanoparticles (NPs) could enable imaging/diagnosis and local delivery of payloads to plaques. Methods: The amount of FN-EDB in human atherosclerotic and normal arteries (ages: 40 to 85 years) was assessed by histological staining and quantification using an FN-EDB-specific aptide (APTFN-EDB). FN-EDB-specific NPs that could serve as MRI beacons were constructed by immobilizing APTFN-EDB on the NP surface containing DTPA[Gd]. MRI visualized APTFN-EDB-[Gd]NPs administered to atherosclerotic apolipoprotein E-deficient mice in the brachiocephalic arteries. Analysis of the ascending-to-descending thoracic aortas and the aortic roots of the mice permitted quantitation of Gd, FN-EDB, and APTFN-EDB-[Gd]NPs. Cyanine, a model small molecule drug, was used to study the biodistribution and pharmacokinetics of APTFN-EDB-NPs to evaluate their utility for drug delivery. Results: Atherosclerotic tissues had significantly greater FN-EDB-positive areas than normal arteries (P < 0.001). This signal pertained particularly to Type III (P < 0.01), IV (P < 0.01), and V lesions (P < 0.001) rather than Type I and II lesions (AHA classification). FN-EDB expression was positively correlated with macrophage accumulation and neoangiogenesis. Quantitative analysis of T1-weighted images of atherosclerotic mice revealed substantial APTFN-EDB-[Gd]NPs accumulation in plaques compared to control NPs, conventional MRI contrast agent (Gd-DTPA) or accumulation in wild-type C57BL/6J mice. Additionally, the APTFN-EDB-NPs significantly prolonged the blood-circulation time (t1/2: ~ 6 h) of a model drug and increased its accumulation in plaques (6.9-fold higher accumulation vs. free drug). Conclusions: Our findings demonstrate augmented FN-EDB expression in Type III, IV, and V atheromata and that APTFN-EDB-NPs could serve as a platform for identifying and/or delivering agents locally to a subset of atherosclerotic plaques.

Calcific aortic valvular disease (CAVD) is the most prevalent valvular pathology in the United States. Development of a pharmacologic agent to slow, halt, or reverse calcification has proven to be unsuccessful as still much remains unknown about the mechanisms of disease initiation. Although in vitro models of some features of CAVD exist, their utility is limited by the inconsistency of the size and time course of the calcified cell aggregates. In this study, we introduce and verify a highly reproducible in vitro method for studying dystrophic calcification of cardiac valvular interstitial cells, considered to be a key mechanism of clinical CAVD. By utilizing micro-contact printing, we were able to consistently reproduce cell aggregation, myofibroblastic markers, programmed cell death, and calcium accumulation within aggregates of 50-400 μm in diameter on substrates with moduli from 9.6 to 76.8 kPa. This method is highly repeatable, with 70% of aggregates staining positive for Alizarin Red S after one week in culture. Dense mineralized calcium-positive nanoparticles were found within the valvular interstitial cell aggregates as shown by scanning electron microscopy (SEM) and energy dispersive spectrometry (EDS). The area of micro-contact printed aggregates staining positive for caspase 3/7 activity increased from 5.9 ± 0.9% to 12.6 ± 4.5% over one week in culture. Z-VAD-FMK reduced aggregates staining positive for Alizarin Red S by 60%. The state of cell stress is hypothesized to play a role in the disease progression; traction force microscopy indicates high substrate stresses along the aggregate periphery which can be modulated by altering the size of the aggregates and the modulus of the substrate. Micro-contact printing is advantageous over the currently used in vitro model as it allows the independent study of how cytokines, substrate modulus, and pharmacologic agents affect calcification. This controlled method for aggregate creation has the potential to be used as an in vitro assay for the screening of promising therapeutics to mitigate CAVD.

The first successful heart transplant 50 years ago by Dr.Christiaan Barnard in Cape Town, South Africa revolutionized cardiovascular medicine and research. Following this procedure, numerous other advances have reduced many contributors to cardiovascular morbidity and mortality; yet, cardiovascular disease remains the leading cause of death globally. Various unmet needs in cardiovascular medicine affect developing and underserved communities, where access to state-of-the-art advances remain out of reach. Addressing the remaining challenges in cardiovascular medicine in both developed and developing nations will require collaborative efforts from basic science researchers, engineers, industry, and clinicians. In this perspective, we discuss the advancements made in cardiovascular medicine since Dr. Barnard's groundbreaking procedure and ongoing research efforts to address these medical issues. Particular focus is given to the mission of the International Society for Applied Cardiovascular Biology (ISACB), which was founded in Cape Town during the 20th celebration of the first heart transplant in order to promote collaborative and translational research in the field of cardiovascular medicine.

Heart valves control unidirectional blood flow within the heart during the cardiac cycle. They have a remarkable ability to withstand the demanding mechanical environment of the heart, achieving lifetime durability by processes involving the ongoing remodeling of the extracellular matrix. The focus of this review is on heart valve functional physiology, with insights into the link between disease-induced alterations in valve geometry, tissue stress, and the subsequent cell mechanobiological responses and tissue remodeling. We begin with an overview of the fundamentals of heart valve physiology and the characteristics and functions of valve interstitial cells (VICs). We then provide an overview of current experimental and computational approaches that connect VIC mechanobiological response to organ- and tissue-level deformations and improve our understanding of the underlying functional physiology of heart valves. We conclude with a summary of future trends and offer an outlook for the future of heart valve mechanobiology, specifically, multiscale modeling approaches, and the potential directions and possible challenges of research development. © 2016 American Physiological Society. Compr Physiol 6:1743-1780, 2016.

The past several decades have witnessed major advances in the understanding of the structure, function, and biology of native valves and the pathobiology and clinical management of valvular heart disease. These improvements have enabled earlier and more precise diagnosis, assessment of the proper timing of surgical and interventional procedures, improved prosthetic and biologic valve replacements and repairs, recognition of postoperative complications and their management, and the introduction of minimally invasive approaches that have enabled definitive and durable treatment for patients who were previously considered inoperable. This review summarizes the current state of our understanding of the mechanisms of heart valve health and disease arrived at through innovative research on the cell and molecular biology of valves, clinical and pathological features of the most frequent intrinsic structural diseases that affect the valves, and the status and pathological considerations in the technological advances in valvular surgery and interventions. The contributions of many cardiovascular pathologists and other scientists, engineers, and clinicians are emphasized, and potentially fruitful areas for research are highlighted.

Heart valves are dynamic structures that, in the average human, open and close over 100,000 times per day, and 3 × 109 times per lifetime to maintain unidirectional blood flow. Efficient, coordinated movement of the valve structures during the cardiac cycle is mediated by the intricate and sophisticated network of extracellular matrix (ECM) components that provide the necessary biomechanical properties to meet these mechanical demands. Organized in layers that accommodate passive functional movements of the valve leaflets, heart valve ECM is synthesized during embryonic development, and remodeled and maintained by resident cells throughout life. The failure of ECM organization compromises biomechanical function, and may lead to obstruction or leaking, which if left untreated can lead to heart failure. At present, effective treatment for heart valve dysfunction is limited and frequently ends with surgical repair or replacement, which comes with insuperable complications for many high-risk patients including aged and pediatric populations. Therefore, there is a critical need to fully appreciate the pathobiology of biomechanical valve failure in order to develop better, alternative therapies. To date, the majority of studies have focused on delineating valve disease mechanisms at the cellular level, namely the interstitial and endothelial lineages. However, less focus has been on the ECM, shown previously in other systems, to be a promising mechanism-inspired therapeutic target. Here, we highlight and review the biology and biomechanical contributions of key components of the heart valve ECM. Furthermore, we discuss how human diseases, including connective tissue disorders lead to aberrations in the abundance, organization and quality of these matrix proteins, resulting in instability of the valve infrastructure and gross functional impairment.

Studies suggest that cardiorespiratory dysfunction likely contributes to sudden unexpected death in epilepsy (SUDEP). Seizures result in autonomic and respiratory dysfunction, leading to sympathetic hyperactivity and respiratory distress, including apnea. While the heart is vulnerable to catecholamine surges and hypoxia, it remains unknown if repetitive generalized seizures lead to cardiac damage. DBA/1 mice exhibit seizure-induced respiratory arrest (S-IRA) following generalized audiogenic seizures (AGS), which can be resuscitated using a rodent ventilator. In the current study, we induced different numbers of S-IRA episodes in DBA/1 mice and determined the association of repeated S-IRA induction with cardiac damage using histology. After repetitive induction of 18 S-IRA, calcified lesions, as revealed by calcium (Ca2+)-specific alizarin red staining, were observed in the ventricular myocardium in 61.5% of DBA/1 mice, which was higher compared to mice with 5 S-IRA and 1 S-IRA as well as age-matched untested control mice. The incidence of lesions in mice with 9 S-IRA was only higher than that of control mice. Only 1–2, small lesions were observed in mice with 5 S-IRA and 1 S-IRA and in control mice. Larger lesions (> 2500 μm2) were observed in mice with 9 and 18 S-IRA. The incidence of larger lesions was higher in mice with 18 S-IRA (53.8%) as compared to mice with 5 S-IRA and 1 S-IRA as well as with control mice, and the incidence of larger lesions in mice with 9 S-IRA was only higher than that of control mice. Repeated induction of S-IRA in DBA/1 mice can result in calcified necrotic lesions in the ventricles of the heart, and their incidence and size are dependent on the total number of S-IRA.

Background Non-invasive monitoring of autologous vein graft (VG) bypass grafts is largely limited to detecting late luminal narrowing. Although magnetic resonance imaging (MRI) delineates vein graft intima, media, and adventitia, which may detect early failure, the scan time required to achieve sufficient resolution is at present impractical. Purpose To study VG visualization enhancement in vivo and delineate whether a covalently attached MRI contrast agent would enable quicker longitudinal imaging of the VG wall. Material and Methods Sixteen 12-week-old male C57BL/6J mice underwent carotid interposition vein grafting. The inferior vena cava of nine donor mice was treated with a gadolinium-diethylenetriaminepentaacetic acid (Gd-DTPA)-based contrast agent, with control VGs labeled with a vehicle. T1-weighted (T1W) MRI was performed serially at postoperative weeks 1, 4, 12, and 20. A portion of animals was sacrificed for histopathology following each imaging time point. Results MRI signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were significantly higher for treated VGs in the first three time points (1.73 × higher SNR, P = 0.0006, and 5.83 × higher CNR at the first time point, P = 0.0006). However, MRI signal enhancement decreased consistently in the study period, to 1.29 × higher SNR and 2.64 × higher CNR, by the final time point. There were no apparent differences in graft morphometric analyses in Masson’s trichrome-stained sections. Conclusion A MRI contrast agent that binds covalently to the VG wall provides significant increase in T1W MRI signal with no observed adverse effects in a mouse model. Further optimization of the contrast agent to enhance its durability is required.

Bicuspid aortic valve is the most prevalent cardiac valvular malformation. It is associated with a high rate of long-term morbidity including development of calcific aortic valve disease, aortic regurgitation and concomitant thoracic aortic aneurysm and dissection. Recently, basic and translational studies have identified some key processes involved in the development of bicuspid aortic valve and its morbidity. The development of aortic valve disease and thoracic aortic aneurysm and dissection is the result of complex interactions between genotypes, environmental risk factors and specific haemodynamic conditions created by bicuspid aortic valve anatomy. Herein, we review the pathobiology of bicuspid aortic valve with a special emphasis on translational aspects of these basic findings. Important but unresolved problems in the pathology of bicuspid aortic valve and thoracic aortic aneurysm and dissection are discussed, along with the molecular processes involved.

Background and Purpose— Recent symptoms stand as a major determinant of stroke risk in patients with carotid stenosis, likely reflective of atherosclerotic plaque destabilization. In view of emerging links between vascular and adipose biology, we hypothesized that human perivascular adipose characteristics associate with carotid disease symptom status. Methods— Clinical history, carotid plaques, blood, and subcutaneous and perivascular adipose tissues were prospectively collected from patients undergoing carotid endarterectomy. Nine adipose-associated biological mediators were assayed and compared in patients with symptomatic (n=15) versus asymptomatic (n=19) disease. Bonferroni correction was performed for multiple testing ( α /9=0.006). Results— Symptomatic patients had 1.9-fold higher perivascular adiponectin levels ( P =0.005). Other circulating, subcutaneous, and perivascular biomarkers, as well as microscopic plaque characteristics, did not differ between symptomatic and asymptomatic patients. Conclusions— Symptomatic and asymptomatic carotid endarterectomy patients display a tissue-specific difference in perivascular adipose adiponectin. This difference, which was not seen in plasma or subcutaneous compartments, supports a potential local paracrine relationship with vascular disease processes that may be related to stroke mechanisms.

Three dimensional (3D) hydrogel platforms are powerful tools, providing controllable, physiologically relevant microenvironments that could aid in understanding the role of various environmental factors in directing valvular interstitial cell (VIC) phenotype. Continuous activation of VICs and their transformation from quiescent fibroblast to activated myofibroblast phenotype is considered to be an initiating event in the onset of valve disease. However, relative contribution of changes in VIC phenotype are poorly understood since most 2-dimensional (2D) culture systems lead to spontaneous VIC myofibroblastic activation. Here, a hydrogel platform composed of photocrosslinkable versions of native valvular extracellular matrix components –methacrylated hyaluronic acid (HAMA) and methacrylated gelatin (GelMA) – is proposed as a 3D culture system to study VIC phenotypic changes. Our results showed that VIC myofibroblast-like differentiation, determined by α-SMA, MMP-9, and Collagen type I expression, occurs spontaneously in mechanically soft GelMA hydrogels. In contrast, VICs encapsulated in HAMA-GelMA hybrid hydrogels, does not occur spontaneously and require exogenous delivery of TGFβ1, indicating that hybrid hydrogels can be used to study cytokine-dependent transition of encapsulated VICs. This study demonstrated that a hybrid hydrogel platform can be used to maintain a quiescent VIC phenotype and study the effect of pathological environmental cues on VIC activation, which will aid in understanding pathobiology of valvular disease.

Bicuspid aortic valve is the most prevalent cardiac valvular malformation. It is associated with a high rate of long‐term morbidity including development of calcific aortic valve disease, aortic regurgitation and concomitant thoracic aortic aneurysm and dissection. Recently, basic and translational studies have identified some key processes involved in the development of bicuspid aortic valve and its morbidity. The development of aortic valve disease and thoracic aortic aneurysm and dissection is the result of complex interactions between genotypes, environmental risk factors and specific haemodynamic conditions created by bicuspid aortic valve anatomy. Herein, we review the pathobiology of bicuspid aortic valve with a special emphasis on translational aspects of these basic findings. Important but unresolved problems in the pathology of bicuspid aortic valve and thoracic aortic aneurysm and dissection are discussed, along with the molecular processes involved.

Whether Barlow disease (BD) and fibroelastic deficiency (FED), the main causes of mitral valve prolapse (MVP), should be considered 2 distinct diseases remains unknown. Mitral valves from patients who required surgery for severe mitral regurgitation due to degenerative nonsyndromic MVP were analyzed. Intraoperative diagnosis of BD or FED was based on leaflet redundancy and thickness, number of segments involved, and annular dimension. The removed medial scallop of the posterior leaflet and attached chordae were used for histopathological and immunohistological assessment. Histologically, compared to normal controls (n = 3), BD (n = 14), and FED (n = 9) leaflets demonstrated an altered architecture and increased thickness. Leaflet thickness was greater and chordae thickness lower in BD than FED (P < 0.0001). In BD, increased thickness was owing to spongiosa expansion (proteoglycan accumulation) and intimal thickening on fibrosa and atrialis; in FED, local thickening was predominant on the fibrosa side, with accumulation of proteoglycan-like material around the chordae. Collagen accumulation was observed in FED leaflets and chords and decreased in BD. Fragmented elastin fibers were present in BD and FED; elastin decreased in BD but increased in FED leaflets and around chordae. Activated myofibroblasts accumulate in both diseased leaflets and chords, but more abundantly in FED chordae (P < 0.0001), independently of age, suggesting a role of these cells in chordal rupture. There were more CD34-positive cells in BD leaflets and in FED chordae (P < 0.01). In BD leaflets (but not chordae) proliferative Ki67-positive cells were more abundant (P < 0.01) and matrix metalloproteinase 2 levels were increased (P < 0.01) indicating tissue remodeling. Upregulation of transforming growth factor beta and pERK signaling pathways was evident in both diseases but more prominent in FED leaflets (continued on next page)(P < 0.001), with pERK upregulation in FED chordae (P < 0.0001). Most cellular and signaling markers were negligible in control valves. Quantitative immunohistopathological analyses demonstrated distinct changes between BD and FED valves: predominant matrix degradation in BD and increased profibrotic signaling pathways in FED, indicating that BD and FED are 2 different entities. These results may pave the way for genetic studies of MVP and development of preventive drug therapies.

The clinical and pathological features of the most frequent intrinsic structural diseases that affect the heart valves are well established, but heart valve disease mechanisms are poorly understood, and effective treatment options are evolving. Major advances in the understanding of the structure, function and biology of native valves and the pathobiology, biomaterials and biomedical engineering, and the clinical management of valvular heart disease have occurred over the past several decades. This communication reviews contemporary considerations relative to the pathology of valvular heart disease, including (1) clinical significance and epidemiology of valvular heart disease; (2) functional and dynamic valvular macro-, micro- and ultrastructure; (3) causes, morphology and mechanisms of human valvular heart disease; and (4) pathologic considerations in valve replacement, repair and, potentially, regeneration of the heart valves.

Background Ascending thoracic aortic aneurysm ( ATAA ) is driven by angiotensin II (Ang II ) and contributes to the development of left ventricular ( LV ) remodeling through aortoventricular coupling. We previously showed that locally available leptin augments Ang II ‐induced abdominal aortic aneurysms in apolipoprotein E–deficient mice. We hypothesized that locally synthesized leptin mediates Ang II ‐induced ATAA . Methods and Results Following demonstration of leptin synthesis in samples of human ATAA associated with different etiologies, we modeled in situ leptin expression in apolipoprotein E–deficient mice by applying exogenous leptin on the surface of the ascending aorta. This treatment resulted in local aortic stiffening and dilation, LV hypertrophy, and thickening of aortic/mitral valve leaflets. Similar results were obtained in an Ang II ‐infusion ATAA mouse model. To test the dependence of Ang II ‐induced aortic and LV remodeling on leptin activity, a leptin antagonist was applied to the ascending aorta in Ang II ‐infused mice. Locally applied single low‐dose leptin antagonist moderated Ang II ‐induced ascending aortic dilation and protected mice from ATAA rupture. Furthermore, LV hypertrophy was attenuated and thickening of aortic valve leaflets was moderated. Last, analysis of human aortic valve stenosis leaflets revealed de novo leptin synthesis, whereas exogenous leptin stimulated proliferation and promoted mineralization of human valve interstitial cells in culture. Conclusions Ang II ‐induced ATAA is mediated by locally synthesized leptin. Aortoventricular hemodynamic coupling drives LV hypertrophy and promotes early aortic valve lesions, possibly mediated by valvular in situ leptin synthesis. Clinical implementation of local leptin antagonist therapy may attenuate Ang II ‐induced ATAA and moderate related LV hypertrophy and pre–aortic valve stenosis lesions. Clinical Trial Registration URL : https://www.clinicaltrials.gov/ . Unique identifier: NCT 00449306.

Purpose Calcific aortic valve disease (CAVD) is the most prevalent valve disease in the Western world. Recent difficulty in translating experimental results on statins to beneficial clinical effects warrants the need for understanding the role of valvular interstitial cells (VICs) in CAVD. In two-dimensional culture conditions, VICs undergo spontaneous activation similar to pathological differentiation, which intrinsically limits the use of in vitro models to study CAVD. Here, we hypothesized that a three-dimensional (3D) culture system based on naturally derived extracellular matrix polymers, mimicking the microenvironment of native valve tissue, could serve as a physiologically relevant platform to study the osteogenic differentiation of VICs. Principal results Aortic VICs loaded into 3D hydrogel constructs maintained a quiescent phenotype, similar to healthy human valves. In contrast, osteogenic environment induced an initial myofibroblast differentiation (hallmarked by increased alpha smooth muscle actin [α-SMA] expression), followed by an osteoblastic differentiation, characterized by elevated Runx2 expression, and subsequent calcific nodule formation recapitulating CAVD conditions. Silencing of α-SMA under osteogenic conditions diminished VIC osteoblast-like differentiation and calcification, indicating that a VIC myofibroblast-like phenotype may precede osteogenic differentiation in CAVD. Major conclusions Using a 3D hydrogel model, we simulated events that occur during early CAVD in vivo and provided a platform to investigate mechanisms of CAVD. Differentiation of valvular interstitial cells to myofibroblasts was a key mechanistic step in the process of early mineralization. This novel approach can provide important insight into valve pathobiology and serve as a promising tool for drug screening.

This article provides the transcript for the Panel on Developing a Biomaterials Curriculum held at the 2011 annual meeting of the Society for Biomaterials in Orlando, FL. The panelists were Thomas R. Harris of Vanderbilt University, Jack Lemons of the University of Alabama, Birmingham, Antonios G. Mikos of Rice University, David A. Puleo on the University of Kentucky, Frederick J. Schoen of Harvard Medical School, and Johnna S. Temenoff of Georgia Tech/Emory. The panelists, each an expert in engineering education and textbook author, presented their perspectives on key issues of developing undergraduate and graduate curricula that contain a biomaterials focus. The presentations were followed by a lively and informative discussion with the audience. A redacted portion of this discussion is included.

Calcific aortic valve disease (CAVD) encompasses the range of disease from initial alterations in the cell biology of the leaflets to end-stage calcification resulting in left ventricular outflow obstruction. The first detectable macroscopic changes in the leaflets, seen as calcification, or focal leaflet thickening with normal valve function, is termed aortic valve sclerosis, but it is likely that the initiating events in the disease process occur much earlier. Disease progression is characterized by a process of thickening of the valve leaflets and the formation of calcium nodules—often including the formation of actual bone—and new blood vessels, which are concentrated near the aortic surface. End-stage disease, eg, calcific aortic stenosis, is characterized pathologically by large nodular calcific masses within the aortic cusps that protrude along the aortic surface into the sinuses of Valsalva, interfering with opening of the cusps. There is no disease along the ventricular surface. For decades, this disease was thought to be a passive process in which the valve degenerates with age in association with calcium accumulation. Moreover, although CAVD is more common with age, it is not an inevitable consequence of aging. Instead, CAVD appears to be an actively regulated disease process that cannot be characterized exclusively as senile or degenerative. The National Heart, Lung, and Blood Institute convened a group of scientists from different fields of study, including cardiac imaging, molecular biology, cardiovascular pathology, epidemiology, cell biology, endocrinology, bioengineering, and clinical outcomes, to review the scientific studies from the past decade in the field of CAVD. The purpose was to develop a consensus statement on the current state of translational research related to CAVD. Herein, we summarize recent scientific studies and define future directions for research to diagnose, treat, and potentially prevent this complex disease process. ### Key Structure-Function Correlations Heart valves permit unobstructed, unidirectional forward flow through the circulation. …

Background One of the most important factors responsible for the calcific failure of bioprosthetic heart valves is glutaraldehyde crosslinking. Ethanol (EtOH) incubation after glutaraldehyde crosslinking has previously been reported to confer anticalcification efficacy for bioprostheses. The present studies investigated the anticalcification efficacy in vivo of the novel crosslinking agent, triglycidyl amine (TGA), with or without EtOH incubation, in comparison with glutaraldehyde. Methods The TGA crosslinking (± EtOH) was used to prepare porcine aortic valves for both rat subdermal implants and sheep mitral valve replacements, for comparisons with glutaraldehyde-fixed controls. Thermal denaturation temperature, an index of crosslinking, cholesterol extraction, and hydrodynamic properties were quantified. Explant endpoints included quantitative and morphologic assessment of calcification. Results Thermal denaturation temperatures after TGA were intermediate between unfixed and glutaraldehyde-fixed. EtOH incubation resulted in almost complete extraction of cholesterol from TGA or glutaraldehyde-fixed cusps. Rat subdermal explants (90 days) demonstrated that TGA-EtOH resulted in a significantly greater level of inhibition of calcification than other conditions. Thus, TGA-ethanol stent mounted porcine aortic valve bioprostheses were fabricated for comparisons with glutaraldehyde-pretreated controls. In hydrodynamic studies, TGA-EtOH bioprostheses had lower pressure gradients than glutaraldehyde-fixed. The TGA-ethanol bioprostheses used as mitral valve replacements in juvenile sheep (150 days) demonstrated significantly lower calcium levels in both explanted porcine aortic cusp and aortic wall samples compared with glutaraldehyde-fixed controls. However, TGA-EtOH sheep explants also demonstrated isolated calcific nodules and intracuspal hematomas. Conclusions The TGA-EtOH pretreatment of porcine aortic valves confers significant calcification resistance in both rat subdermal and sheep circulatory implants, but with associated structural instability.

There is a significant gap in our knowledge of engineered heart valve tissue (EHVT) development regarding detailed three-dimensional (3D) tissue formation and remodeling from the point of in vitro culturing to full in vivo function. As a step toward understanding the complexities of EHVT formation and remodeling, a novel serial confocal microscopy technique was employed to obtain 3D micro-structural information of pre-implant (PRI) and post-implant for 12 weeks (POI) EHVT fabricated from PGA: PLLA scaffolds and seeded with ovine bone-marrow-derived mesenchymal stem cells. Custom scaffold fiber tracking software was developed to quantify scaffold fiber architectural features such as length, tortuosity, and minimum scaffold fiber–fiber separation distance and scaffold fiber orientation was quantified utilizing a 3D fabric tensor. In addition, collagen and cellular density of ovine pulmonary valve leaflet tissue were also analyzed for baseline comparisons. Results indicated that in the unseeded state, scaffold fibers formed a continuous, oriented network. In the PRI state, the scaffold showed some fragmentation with a scaffold volume fraction of 7.79%. In the POI specimen, the scaffold became highly fragmented, forming a randomly distributed short fibrous network (volume fraction of 2.03%) within a contiguous, dense collagenous matrix. Both PGA and PLLA scaffold fibers were observed in the PRI and POI specimens. Collagen density remained similar in both PRI and POI specimens (74.2 and 71.5%, respectively), though the distributions in the transmural direction appeared slightly more homogenous in the POI specimen. Finally, to guide future 2D histological studies for large-scale studies (since acquisition of high-resolution volumetric data is not practical for all specimens), we investigated changes in relevant collagen and scaffold metrics (collagen density and scaffold fiber orientation) with varying section spacing. It was found that a sectioning spacing up to 25 μm (for scaffold morphology) and 50 μm (for collagen density) in both PRI and POI tissues did not result in loss of information fidelity, and that sectioning in the circumferential or radial direction provides the greatest preservation of information. This is the first known work to investigate EHVT microstructure over a large volume with high resolution and to investigate time evolving in vivo EHVT morphology. The important scaffold fiber structural changes observed provide morphological information crucial for guiding future structurally based constitutive modeling efforts focused on better understanding EHVT tissue formation and remodeling.

Surgical replacement of diseased heart valves by mechanical and tissue valve substitutes is now commonplace and enhances survival and quality of life for many patients. However, repairs of congenital deformities require very small valve sizes not commercially available. Further, a fundamental problem inherent to the use of existing mechanical and biological prostheses in the pediatric population is their failure to grow, repair, and remodel. It is believed that a tissue engineered heart valve can accommodate many of these requirements, especially those pertaining to somatic growth. This review provides an overview of the field of heart valve tissue engineering, including recent trends, with a focus on the bioengineering challenges unique to heart valves. We believe that, currently, the key bioengineering challenge is to determine how biological, structural, and mechanical factors affect extracellular matrix (ECM) formation and in vivo functionality. These factors are fundamental to any approach toward developing a clinically viable tissue engineered heart valve (TEHV), regardless of the particular approach. Critical to the current approaches to TEHVs is scaffold design, which must simultaneously provide function (valves must function from the time of implant) as well as stress transfer to the new ECM. From a bioengineering point of view, a hierarchy of approaches will be necessary to connect the organ-tissue relationships with underpinning cell and sub-cellular events. Overall, such approaches need to be structured to address these fundamental issues to lay the basis for TEHVs that can be developed and designed according to truly sound scientific and engineering principles.

MRL/MpJ-Faslpr (MRL-Faslpr) mice develop a spontaneous T cell and macrophage-dependent autoimmune disease that shares features with human lupus. Interactions via the programmed death 1/programmed death ligand 1 (PD-1/PD-L1) pathway down-regulate immune responses and provide a negative regulatory checkpoint in mediating tolerance and autoimmune disease. Therefore, we tested the hypothesis that the PD-1/PD-L1 pathway suppresses lupus nephritis and the systemic illness in MRL-Faslpr mice. For this purpose, we compared kidney and systemic illness (lymph nodes, spleen, skin, lung, glands) in PD-L1 null (−/−) and PD-L1 intact (wild type, WT) MRL-Faslpr mice. Unexpectedly, PD-L1−/−;MRL-Faslpr mice died as a result of autoimmune myocarditis and pneumonitis before developing renal disease or the systemic illness. Dense infiltrates, consisting of macrophage and T cells (CD8+ > CD4+), were prominent throughout the heart (atria and ventricles) and localized specifically around vessels in the lung. In addition, once disease was evident, we detected heart specific autoantibodies in PD-L1−/−;MRL-Faslpr mice. This unique phenotype is dependent on MRL-specific background genes as PD-L1−/−;MRL+/+ mice lacking the Faslpr mutation developed autoimmune myocarditis and pneumonitis. Notably, the transfer of PD-L1−/−;MRL+/+ bone marrow cells induced myocarditis and pneumonitis in WT;MRL+/+ mice, despite a dramatic up-regulation of PD-L1 expression on endothelial cells in the heart and lung of WT;MRL+/+ mice. Taken together, we suggest that PD-L1 expression is central to autoimmune heart and lung disease in lupus-susceptible (MRL) mice.

Introduction: Recent symptoms stand as a major determinant of stroke risk in carotid stenosis patients, likely reflective of atherosclerotic plaque destabilization. Hypothesis: In view of emerging links between vascular and adipose biology, we hypothesized that human perivascular adipose characteristics associate with carotid disease symptom status. Methods: Clinical history, carotid plaques, blood, and subcutaneous and perivascular adipose tissues were prospectively collected from consented patients undergoing carotid endarterectomy (CEA). Nine adipose associated biologic mediators (adiponectin, IL-1 beta, IL-6, IL-8, leptin, monocyte chemoattractant protein-1, plasminogen activator inhibitor-1, resistin, and tumor necrosis factor) protein levels were quantified, and compared in patients with symptomatic (n=15) versus asymptomatic (n=19) disease. Bonferroni correction was performed for multiple testing (alpha/9=0.006). Results: Symptomatic patients had 1.9-fold higher perivascular adiponectin levels (median [interquartile range] of symptomatic versus asymptomatic patients was 478.4 ng/ml [315.4-603.9 ng/ml] versus 251.9 ng/ml [212.7-365.4ng/ml], p=0.005). Other circulating, subcutaneous, and perivascular biomarkers, as well as microscopic plaque characteristics, did not differ between symptomatic and asymptomatic patients. Conclusions: Symptomatic and asymptomatic CEA patients display a tissue-specific difference in perivascular adipose adiponectin. This biomarker signature, which was not seen in plasma or subcutaneous compartments, supports a potential local paracrine relationship to vascular disease processes which may relate to stroke mechanisms. Future study of these adipose based paracrine effects may point to novel therapeutic targets and inform patient selection for preventative interventions.