Search

Hepatitis C virus (HCV)-infected patients require a specific continuum of care (CoC) from HCV screening to treatment. We assessed CoC of HCV-infected patients in a longitudinal study.We established a cohort of subjects undergoing HCV screening (high alanine aminotransferase levels or risk factors) during preventive consultations at a French regional medical center from 1993 to 2013. Patients were considered to be HCV-infected if HCV RNA was detected in their serum. CoC was assessed as described by Viner et al. (Hepatology 2015): Stage 1, HCV screening; Stage 2, HCV RNA testing; Stage 3, continuing care; Stage 4, antiviral treatment. Cox multivariate analysis was performed to identify factors favoring CoC, defined as at least one course of antiviral treatment.In total, 12,993 HCV tests were performed and 478 outpatients were found to be HCV-seropositive. We included 417 seropositive patients, after excluding false positives and patients lost to follow-up. The baseline characteristics of the patients were: sex ratio (M/F) 1.4; mean age 38.5 years; intravenous drug use (IDU) in 55%; and 28% in unstable social situations, estimated by the EPICES deprivation score. Antiviral treatment was initiated for 179 (42.9%) of the 379 (90.9%) patients attending specialist consultations. CoC was associated with screening after 1997 (HR 2.0, 95%CI 1.4-2.9), age > 45 years (HR 1.5, 95%CI 1.02-2.3), patient acceptance of care (HR 9.3, 95%CI 5.4-16.10), specialist motivation for treatment (HR 10.9, 95%CI 7.4-16.0), and absence of cancer (HR 6.7, 95%CI 1.6-27.9). Other comorbid conditions, such as depression and IDU, were not associated with CoC.Our 20-year cohort study reveals the real-life continuum of care for HCV-infected patients in France. The number of patients involved in HCV care after positive testing was substantial due to the organization of healthcare in France. An improved CoC along with new direct-acting antivirals should help to decrease chronic HCV infection.

In this paper we study the walls wood masonry behaviour. First, we propose a regulatory validation of the walls wood masonry behaviour subjected to vertical and horizontal loads according to Eurocode 5. Then we present the numerical application on the wall wood supported two floors level.

Compressed earth bricks (CEBs) are increasingly used as a sustainable building material, but their hygroscopic nature makes them susceptible to moisture-related degradation. Monitoring moisture content in CEBs is crucial for ensuring structural integrity and durability, yet existing methods are often destructive or limited in application. This study presents a non-destructive approach for assessing moisture content in CEBs using electrical resistivity measurements, adapted from geophysical surveying techniques. The research employed a modified Syscal Junior Switch-48 resistivity meter with 4-electrode and 16-electrode configurations to measure electrical resistance in CEB samples under controlled relative humidity conditions ranging from 20 % to 100 %. Clear logarithmic correlations were established between moisture content (1.86–9.48 %) and electrical resistivity. The measured electrical resistivity varied from 12.4Ωm at 9.48 % moisture content to 3350Ωm at 1.86 % moisture content, demonstrating the method's sensitivity across a wide range of moisture levels. The 50 mA measurement mode demonstrated capability to assess moisture levels down to 1.86 %, while the standard 1250 mA mode was effective above 2.9 % moisture content. Numerical modeling using finite element analysis was conducted to determine geometric factors and true resistivity values. The 16-electrode multiplexed measurements showed good agreement with the experimental trend, enabling potential internal moisture mapping. This application of resistivity measurements represents a significant advance in non-destructive monitoring of earthen construction materials.

The research focused on simulating wind patterns in urban planning design offers substantial contributions to both the social and economic aspects of the urban planning and design field. To begin with, it addresses a critical factor in urban development, especially in Mediterranean climates, where natural ventilation significantly influences summer comfort. By incorporating predictive numerical simulations of urban wind patterns, this study provides valuable insights into improving outdoor thermal comfort within urban areas. This holds particular importance in the context of adapting to climate change, as it equips urban planners and architects with informed decision-making tools to create more sustainable and comfortable urban environments. Additionally, this research makes an economic contribution by presenting guidelines for iterative wind simulations in the early stages of designing medium-scale urban projects. Through the validation of a simulation workflow, it streamlines the design process, potentially reducing the time and resources required for urban planning and architectural design. This enhanced efficiency can result in cost savings during project development. Moreover, the study's recommendations concerning simulation parameters, such as wind tunnel cell size and refinement levels, offer practical insights for optimizing simulation processes, potentially lowering computational expenses and improving the overall economic viability of urban design projects. To summarize, this research effectively addresses climate-related challenges, benefiting both social well-being and economic efficiency in the field of urban planning and design, while also providing guidance for more efficient simulation-driven design procedures.

The study investigated the effect of the molecular weight of three difunctional poly(propylene glycol) diacrylates on the temperature-dependent ionic conductivity of these monomers and their blends with an eutectic nematic liquid crystal mixture (E7). The results revealed two distinct regions. At low temperatures, ionic conduction can be described by the Vogel–Tamman–Fulcher (VTF) equation, while at high temperatures, the conductivity data follow the prediction of the Arrhenius model. The Arrhenius and VTF parameters and their corresponding activation energies were determined using the least squares method. In addition, a conductivity analysis based on an ionic hopping model is proposed. Estimates of ion concentrations and diffusion constants were calculated. It was found that both the ionic concentration and the diffusion constant decrease with the increase in the molecular weight of the monomers. The static dielectric permittivity decreases in the following order: TPGDA, PPGDA540, and PPGDA900. This can be explained by the higher dipole moment of TPGDA, which is caused by an enhanced volume density of carbonyl groups.

The efficiency of plant-growth-promoting rhizobacteria (PGPR) may not be consistently maintained under field conditions due to the influence of soil microbial communities. The present study aims to investigate their impact on three PGPR-based biofertilizers in wheat. We used the PGPR Paenibacillus sp. strain B2 (PB2), PB2 in co-inoculation with Arthrobacter agilis 4042 (Mix 2), or with Arthrobacter sp. SSM-004 and Microbacterium sp. SSM-001 (Mix 3). Inoculation of PB2, Mix 2, and Mix 3 into non-sterile field soil had a positive effect on root and aboveground dry biomass, depending on the wheat cultivar. The efficiency of the PGPR was further confirmed by the protection they provided against Mycosphaerella graminicola, the causal agent of Septoria leaf blotch disease. PB2 exhibited protection of ≥37.8%, while Mix 2 showed ≥47.9% protection in the four cultivars tested. These results suggest that the interactions between PGPR and native soil microbial communities are crucial for promoting wheat growth and protection. Additionally, high-throughput sequencing of microbial communities conducted 7 days after PGPR inoculations revealed no negative effects of PB2, Mix 2, and Mix 3 on the soil microbial community structure. Interestingly, the presence of Arthrobacter spp. appeared to mitigate the potential negative effect of PB2 on bacterial community and foster root colonization by other beneficial bacterial strains.

Current agricultural practices rely heavily on synthetic fertilizers, which not only consume a lot of energy but also disrupt the ecological balance. The overuse of synthetic fertilizers has led to soil degradation. In a more sustainable approach, alternative methods based on biological interactions, such as plant growth-promoting bacteria (PGPRs), are being explored. PGPRs, which include both symbiotic and free-living bacteria, form mutualistic relationships with plants by enhancing nutrient availability, producing growth regulators, and regulating stress responses. This study investigated the potential of Sphingomonas sediminicola Dae20, an α-Proteobacteria species commonly found in the rhizosphere, as a beneficial PGPR. We observed that S. sediminicola Dae20 stimulated the root system and growth of three different plant species in the Brassicaceae family, including Arabidopsis thaliana, mustard, and rapeseed. The bacterium produced auxin, nitric oxide, siderophores and showed ACC deaminase activity. In addition to activating an auxin response in the plant, S. sediminicola Dae20 exhibited the ability to modulate other plant hormones, such as abscisic acid, jasmonic acid and salicylic acid, which are critical for plant development and defense responses. This study highlights the multifunctional properties of S. sediminicola Dae20 as a promising PGPR and underscores the importance of identifying effective and versatile beneficial bacteria to improve plant nutrition and promote sustainable agricultural practices.

The use of biological inputs is an interesting approach to optimize crop production and reduce the use of chemical inputs. Understanding the chemical communication between bacteria and plants is critical to optimizing this approach. Recently, we have shown that Sphingomonas (S.) sediminicola can improve both nitrogen supply and yield in pea. Here, we used biochemical methods and untargeted metabolomics to investigate the chemical dialog between S. sediminicola and pea. We also evaluated the metabolic capacities of S. sediminicola by metabolic profiling. Our results showed that peas release a wide range of hexoses, organic acids, and amino acids during their development, which can generally recruit and select fast-growing organisms. In the presence of S. sediminicola, a more specific pattern of these molecules took place, gradually adapting to the metabolic capabilities of the bacterium, especially for pentoses and flavonoids. In turn, S. sediminicola is able to produce several compounds involved in cell differentiation, biofilm formation, and quorum sensing to shape its environment, as well as several molecules that stimulate pea growth and plant defense mechanisms.

Chemical, structural, and thermal properties of recovered nematic Liquid Crystal (LC) mixtures were investigated by applying several analytical techniques. A large quantity (65,700) of End-Of-Life (EOL) Liquid Crystal Display (LCD) screens were used to extract these LC blends. The studied EOL-LCD screens were heterogeneous in nature, particularly due to their different brands, production years, and dimensions. The collected TV and computer screens, as well as tablets, presented an average diagonal size of 24 inches. Chemical characterization revealed that the recovered compounds present typical chemical structures of LC molecules by the simultaneous presence of aliphatic chains and aromatic and polar groups. POM observations of these samples exhibited Schlieren and marble-like textures at room temperature, which are typical of nematic LCs. Moreover, thermal characterization and thermo-optical analysis showed that these LC mixtures displayed a broad nematic phase between −90 °C and +70 °C.

Amiour et al. use a multi-year field trial evaluation and association mapping to determine if increased enzyme activity and native allelic variations at the GS1 loci in maize contribute to differences in grain yield. Overexpression of GS1 and polymorphisms in the corresponding loci were associated with kernel yield, indicating that GS1 expression can directly control kernel production and that GS1 has a potential lead in the production of high yielding maize hybrids depending on environmental conditions.

Nitrogen (N) is one of the most limiting nutrients for cereal production, especially in wheat, which is one of the main crops cultivated globally. To achieve high yields, wheat requires a certain amount of nitrogen (N), as N deficiency can lead to a decrease in yield and thus reduce income for farmers. In contrast, excessive applications of N fertilizer can be detrimental to both terrestrial and aquatic environments. To optimize N fertilizer applications in wheat, a three-year field experiment was conducted to evaluate the impact of different N fertilization strategies on various N-related physiological and agronomic traits. Moreover, to optimize N utilization efficiency while maintaining crop productivity, a mixture of five winter wheat varieties was used to mitigate the possible impact of environmental constraints. These strategies were based on a simultaneous increase in N fertilization and N fertilizer fractionation at key stages of plant development in a soil conservation agriculture (SCA) system in which legumes were grown prior to the cultivation of the main crop. In this SCA system, we observed that 200 kgN·ha−1 was optimal for both N use efficiency (NUE) and aerial and grain biomass production. Moreover, we found that at this level of N fertilization, of the application strategies, a 40%/40%/20% split application at full tillering, at the first node, and at booting, respectively, appeared to be the best option for the highest plant productivity.

The application of bacterial bio-inputs is a very attractive alternative to the use of mineral fertilisers. In ploughed soils including a crop rotation pea, we observed an enrichment of bacterial communities with Sphingomonas (S.) sediminicola. Inoculation experiments, cytological studies, and de novo sequencing were used to investigate the beneficial role of S. sediminicola in pea. S. sediminicola is able to colonise pea plants and establish a symbiotic association that promotes plant biomass production. Sequencing of the S. sediminicola genome revealed the existence of genes involved in secretion systems, Nod factor synthesis, and nitrogenase activity. Light and electron microscopic observations allowed us to refine the different steps involved in the establishment of the symbiotic association, including the formation of infection threads, the entry of the bacteria into the root cells, and the development of differentiated bacteroids in root nodules. These results, together with phylogenetic analysis, demonstrated that S. sediminicola is a non-rhizobia that has the potential to develop a beneficial symbiotic association with a legume. Such a symbiotic association could be a promising alternative for the development of more sustainable agricultural practices, especially under reduced N fertilisation conditions.

This report focuses particularly on liquid crystals display (LCD) panels because they represent a significant amount of all WEEE collected. Technologies involving liquid crystals (LCs) have enjoyed considerable success since the 1970s in all fields of LC displays (LCDs). This currently provokes the problem of waste generated by such equipment. Based on current statistical data, the LC amount represents approximately 1.3 g for a 35-inch diameter LCD panel unit possessing a total weight of 15 kg. In France, a recent study revealed LCD waste to represent an average of 5.6 panels per household. This represents an important quantity of LCs, which are generally destroyed by incineration or washed out with detergents during the recycling processes of end-of-life (EOL) LCDs. Hence, the aim of this study is to show that it is possible to remove LC molecules from EOL-LCD panels with the goal of valorizing them in new sectors. EOL-LCD panels have undergone various stages of dismantling, chemical treatments and characterization. The first stage of manual dismantling enables the elimination of the remaining physical components of the panels to process LC molecules only, sandwiched between the two glass plates. Mechanical treatment by scraping allows us to obtain a concentrate of LCs. The results obtained from chemical and physical techniques show that these molecules retain the characteristics essential for their operation in the field of optical and electro-optical devices. As the use of LCD surfaces continues to rise significantly, the amounts and economic stakes are huge, fully justifying the development of an LC recovery process for used panels. Many potential uses have been identified for these LC molecules: in new flat LCD panels after purification of the LCs concentrate, in PDLC systems, as lubricants or in thermal applications.

In the present work, the dielectric properties of recycled liquid crystals (LCs) (non-purified, purified, and doped with diamond nanoparticles at 0.05, 0.1, and 0.2 wt%) were investigated. The studied LC mixtures were obtained from industrial recycling of end-of-life LC displays presenting mainly nematic phases. Dielectric measurements were carried out at room temperature on a frequency range from 0.1 to 106 Hz using an impedance analyzer. The amplitude of the oscillating voltage was fixed at 1 V using cells with homogeneous and homeotropic alignments. Results show that the dielectric anisotropy of all purified samples presents positive values and decreases after the addition of diamond nanoparticles to the LC mixtures. DC conductivity values were obtained by applying the universal law of dielectric response proposed by Jonscher. In addition, conductivity of the doped LC mixtures is lower than that of the undoped and non-purified LC.

A two-year experiment was conducted in the field to measure the combined impact of tilling and N fertilization on various agronomic traits related to nitrogen (N) use efficiency and to grain yield in maize cultivated in the presence of a cover crop. Four years after conversion to no-till, a significant increase in N use efficiency N harvest index, N remobilization and N remobilization efficiency was observed both under no and high N fertilization conditions. Moreover, we observed that grain yield and grain N content were higher under no-till conditions only when N fertilizers were applied. Thus, agronomic practices based on continuous no-till appear to be a promising for increasing N use efficiency in maize.

In timber elements the mixed mode dependsessentially of wood anatomy and load configuration.In these conditions, in order to evaluate the materialbehavior and the fracture process, it’s necessary toseparate the part of each mode. The mixed modeseparation allows evaluating the amplitude offracture mode. In the present paper, using a mixedmodecrack growth specimen made in Douglas fir,the mixed mode crack growth process is studythanks to marks tracking method. Using the markstracking method the characteristic displacementsassociated to opening and shear mode aremeasured. From the experimental measurements,the energy release rate associated to opening andshear modes is calculated into to account the crackadvancement during the test.

BACKGROUND/OBJECTIVES:Guidelines for optimized HCV screening are urgently required in Africa, especially for patients infected with HIV, who sometimes show false positive or false negative reactivity in anti-HCV antibody assays. Here, we assessed the usefulness of a fourth-generation HCV Ag-Ab ELISA for the identification of active HCV infection in HIV-positive patients. METHODS:This cross-sectional study was conducted between 03/2010 and 01/2013 and included 762 Gabonese HIV-positive adult patients. The results of ELISA (Monolisa HCV Ag-Ab ULTRA, Bio-Rad) were compared with those obtained by RT-PCR (gold standard). The optimal ELISA signal-to-cutoff (S/CO) ratio to identify patients with active hepatitis C (positive HCV RNA) was determined. Specimens were further tested by the INNO-LIA HCV Score assay (Innogenetics) and the Architect HCV Ag kit (Abbott) to define the best diagnostic strategy. RESULTS:Sixty-seven patients tested positive for HCV (S/CO ratio ≥ 1) by ELISA. Of these, 47 (70.1%) tested positive for HCV RNA. The optimal S/CO associated with active HCV infection was 1.7. At this threshold, the sensitivity of ELISA was 97.9% (95% confidence interval (CI) 90.0-99.9%), its specificity was 91.3% (95% CI 85.0-95.5%), and HCV seroprevalence rate was 7.3% (56/762) (95% CI 5.6-9.4%). Among 57 HCV-seropositive patients with available INNO-LIA results, false reactivity was identified in 14 (24.6%), resolved HCV infection in two (3.5%), possible acute HCV infections in nine (15.8%) and likely chronic HCV infections in 32 (56.1%) patients. HCV core Ag was undetectable in 14/15 (93.3%) specimens that tested negative for HCV RNA whereas it was quantified in 34 (out of 39, 87.2%) samples that tested positive for HCV RNA. CONCLUSIONS:Our study provides comprehensive guidance for HCV testing in Gabon, and will help greatly clinicians to improve case definitions for both the notification and surveillance of HCV in patients co-infected with HIV.

A field study was conducted in northern France over two consecutive years to evaluate the combined effect of conventional tillage (CT) vs no till (NT) with or without cover crops (cc) and nitrogen (N) fertilization on various agronomic traits related to N use efficiency in winter wheat. Five years after conversion of CT to NT, significant increases in N use efficiency, N utilization efficiency, N agronomic efficiency, N partial factor productivity, N apparent recovery fraction and N remobilization were observed under three N fertilization regimes (0, 161, 215 kg ha−1). It was also observed that grain yield and grain N content were similar under CT and NT. The N nutrition index was higher under NT at the three rates of N fertilization. Moreover, N use efficiency related traits were increased in the presence of cc both under NT and CT. Thus, agronomic practices based on continuous NT in the presence of cc, appear to be promising strategies to increase N use efficiency in wheat, while reducing both the use and the loss of N-based fertilizers.

Arbuscular mycorrhizal fungi (AMF) play major roles in nutrient acquisition by crops and are key actors of agroecosystems productivity. However, agricultural practices can have deleterious effects on plant–fungi symbiosis establishment in soils, thus inhibiting its potential benefits on plant growth and development. Therefore, we have studied the impact of different soil management techniques, including conventional moldboard ploughing and no-till under an optimal nitrogen (N) fertilization regime and in the absence of N fertilization, on AMF spore density and soil chemical, physical, and biological indicators in the top 20 cm of the soil horizon. A field experiment conducted over six years revealed that AMF spore density was significantly lower under conventional tillage (CT) combined with intensive synthetic N fertilization. Under no-till (NT) conditions, the density of AMF spore was at least two-fold higher, even under intensive N fertilization conditions. We also observed that there were positive correlations between spore density, soil dehydrogenase enzyme activity, and soil penetration resistance and negative correlations with soil phosphorus and mineral N contents. Therefore, soil dehydrogenase activity and soil penetration resistance can be considered as good indicators of soil quality in agrosystems. Furthermore, the high nitrate content of ploughed soils appears to be detrimental both for the dehydrogenase enzyme activity and the production of AMF spores. It can be concluded that no-till, by preventing soil from structural and chemical disturbances, is a farming system that preserves the entire fungal life cycle and as such the production of viable spores of AMF, even under intensive N fertilization.

Arbuscular mycorrhizal fungi (AMF) play a major role in the uptake of nutrients by agricultural plants. Nevertheless, some agricultural practices can interrupt fungal-plant signaling and thus impede the establishment of the mycorrhizal symbiosis. A field experiment performed over a 5-year period demonstrated that both the absence of tillage and of nitrogen (N) fertilization improved AMF colonization of wheat roots. Moreover, under no-till conditions, N uptake and aboveground biomass production did not vary significantly between N-fertilized and N-unfertilized plots. In contrast, both N uptake and above ground biomass were much lower when N fertilizer was not added during conventional tillage. This finding strongly suggests that for wheat, no-till farming is a sustainable agricultural system that allows a gradual reduction in N fertilizer use by promoting AMF functionality and at the same time increasing N uptake.