Search

International audience; In order to match the beam exiting the RFQ to the superconducting cavities and to minimize the longitudinal beam extension, three rebunchers will be installed in the Medium Energy Beam Transport (MEBT) of SARAF-LINAC phase II. CEA is in charge of the design and fabrication of the copper-plated stainless steel, 3-gap rebunchers. Beam dynamic simulation leads to the global MEBT design. The rebuncher was successfully conditioned to the RF power of 4.4 kW required for CW operation, with sufficient power margin. A solid state power amplifier of 10 kW developed by SNRC is used during the RF test. The rebuncher shows a good performance in terms of the dissipated power, peak temperatures and vacuum level.

International audience; Saclay CEA/IRFU is working for the delivery of five Non-Invasive Profile Monitors in the frame of the in-kind contribution agreement signed with the European Spallation Source. Neutrons will be produced by spallation reactions of 2 GeV proton beam impinging on a Tungsten target. To accelerate protons a powerful linear accelerator of 5MW is under construction. Diagnostic devices are mandatory tools for the tuning and protection of the machine. The non-invasive profile monitors provide a measurement of the beam profile in transverse directions to the beam propagation. This project raises several physical and technical challenges including low signal detection of ions or electrons, profile distortions induced by the beam Space Charge effect and non-uniformities of electric field. Simulation and model of the critical aspects of the detector have been performed in order to prove the performance and the feasibility of the detector. A series of prototypes has been built with different readout types, and tested in real conditions at the 3MeV proton accelerator IPHI. All of them show some advantages and drawbacks revealed by the tests in real beam conditions. In this paper we present the results of the tests for the various configuration readout systems to agree with the model and simulation of the detector. In concluding remarks, we will discuss the performance of the prototypes and point out the camerabased one to be the more suitable for the final design.Key words: Beam diagnostic / Linear proton accelerators / MCP / Strip detector / Particle beam measurements

The early detection of beam losses and the alarm to the machine protection system in accelerators are crucial for the safe operation of the machine. In the low energy region of the hadron accelerators, only neutrons and photons are produced in the case of a beam loss. However, photons are also emitted by electrons at the RF cavities, becoming a natural background for losses identification. A new kind of beam loss monitors have been conceived to extend the sensitivity to the low energy region of the high intensity hadron accelerators. They are based on Micromegas detectors sensitive to fast neutrons. The appropriate configuration of the Micromegas operating conditions will allow a fast response, a sensitivity to small beam losses and a suppressed sensitivity to photons. In this paper the operation principle and the system developed for the European Spallation Source will be presented, with focus on the results obtained at different irradiation facilities. First time proof of operation in real conditions, with the detection of beam losses, will be also shown with measurements performed at LINAC4 (CERN).