Search

Electroconductive biomaterials have been emerged to support the recovery of the degenerated electrically conductive tissues, especially the cardiac ones after myocardial infarction. This work describes the development of electroconductive scaffolds for cardiac tissue regeneration by using a biocompatible and conductive polymer - i.e. poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) - combined with a biomimetic polymer network of gelatin. Our approach involves the use of dehydrothermal (DHT) treatment in vacuum conditions to fabricate suitably stable scaffolds without using any additional crosslinking agent. The resulting scaffolds mimic the Young modulus - an essential mechanical performance - of native cardiac tissue and are endowed with a well-interconnected porosity coupled with a good swelling ability and stability in physiological conditions. Additionally, the presence of PEDOT:PSS is able to enhance the electroconductivity of resulting materials. All the scaffolds are non-cytotoxic towards H9C2 cardiomyoblasts and the presence of PEDOT:PSS enhances cell adhesion - especially at early timeframes, an essential condition for a successful outcome after the implantation - proliferation, and spreading on scaffolds. Considering the permissive interaction of scaffolds with cardiomyoblasts, the present biomimetic and electroconductive scaffolds display potential applications as implantable biomaterials for regeneration of electroconductive tissues, especially cardiac tissue, and as a promising 3D tissue model for in vitro biomolecules screening.

Strain hardening has recently emerged as a near-universal response of biological tissues to mechanical stimulation as well as a powerful regulator of cell fate. Understanding the mechanistic basis for this nonlinear elasticity is crucial for developing bioinspired materials that mimic extracellular matrix mechanics. Here, we show that covalent networks built from highly acetylated chitosans exhibit strain hardening at physiological pH and osmolarity. While varying the chitosan physical-chemical composition and network connectivity, we provide evidence that temporary nodes arising from the entangling of chains between stable cross-links are at the root of nonlinear elasticity. The contour length (Lc) of the said chains revealed that the larger the chain length between the cross-links, the greater is the entanglement over disentanglement upon network stretching. To this end, we calculated that the minimum number of Khun's segments in Lc that contributes to the onset of strain hardening is 15. Furthermore, we identified a relationship between critical strain marking nonlinear elasticity and the network connectivity, being similar to that found for the cytoskeletal collagen matrix, indicating the potential use of semiflexible (neutral pH-soluble) chitosans in assembling extracellular matrix mimics.

This work describes the development of electroconductive hydrogels as injectable matrices for neural tissue regeneration by exploiting a biocompatible conductive polymer - poly(3,4-ethylenedioxythiophene)- poly(styrenesulfonate) (PEDOT:PSS) - combined with a biomimetic polymer network made of gelatin. Our approach involved also genipin - a natural cross-linking agent - to promote gelation of gelatin networks embedding PEDOT:PSS. The achieved results suggest that physical-chemical properties of the resulting hydrogels, like impedance, gelation time, mechanical properties, swelling and degradation in physiological conditions, can be finely tuned by the amount of PEDOT:PSS and genipin used in the formulation. Furthermore, the presence of PEDOT:PSS (i) enhances the electrical conductivity, (ii) improves the shear modulus of the resulting hydrogels though (iii) partially impairing their resistance to shear deformation, (iv) reduces gelation time and (v) reduces their swelling ability in physiological medium. Additionally, the resulting electroconductive hydrogels demonstrate enhanced adhesion and growth of primary rat cortical astrocytes. Given the permissive interaction of hydrogels with primary astrocytes, the presented biomimetic, electroconductive and injectable hydrogels display potential applications as minimally invasive systems for neurological therapies and damaged brain tissue repair.

This work describes the development of an injectable nanocomposite system based on a chitosan thermosensitive hydrogel combined with liposomes for regenerative medicine applications. Liposomes with good physicochemical properties are prepared and embedded within the chitosan network. The resulting nanocomposite hydrogel is able to provide a controlled release of the content from liposomes, which are able to interact with cells and be internalized. The cellular uptake is enhanced by the presence of a chitosan coating, and cells incubated with liposomes embedded within thermosensitive hydrogels displayed a higher cell uptake compared to cells incubated with liposomes alone. Furthermore, the gelation temperature of the system resulted to be equal to 32.6 °C; thus, the system can be easily injected in the target site to form a hydrogel at physiological temperature. Given the peculiar performance of the selected systems, the resulting thermosensitive hydrogels are a versatile platform and display potential applications as controlled delivery systems of liposomes for tissue regeneration.

Developing synthetic materials able to mimic micro- and macrorheological properties of natural networks opens up to novel applications and concepts in materials science. The present contribution describes an active network based on a semi-synthetic polymer, a lactitol-bearing chitosan derivative (Chitlac), and a transient inorganic cross-linker, boric acid. Due to the many and diverse anchoring points for boric acid on the flanking groups of Chitlac, the cross-links constantly break and reform in a highly dynamic fashion. The consequence is a network with unusual non-equilibrium and mechanical properties closely resembling the rheological behavior of natural three-dimensional arrangements and of cytoskeleton. Concepts like network nucleation, reorganization and disassembly are declined in terms of amount of the cross-linker, which acts as a putative motor for remodeling of the network upon application of energy. The out-of-equilibrium and non-linear behavior render the semi-synthetic system of great interest for tissue engineering and for developing in-vitro mimics of natural active matrices.

Biomineralization consists of a complex cascade of phenomena generating hybrid nano-structured materials based on organic (e.g., polymer) and inorganic (e.g., hydroxyapatite) components. Biomineralization is a biomimetic process useful to produce highly biomimetic and biocompatible materials resembling natural hard tissues such as bones and teeth. In detail, biomimetic materials, composed of hydroxyapatite nanoparticles (HA) nucleated on an organic matrix, show extremely versatile chemical compositions and physical properties, which can be controlled to address specific challenges. Indeed, different parameters, including (i) the partial substitution of mimetic doping ions within the HA lattice, (ii) the use of different organic matrices, and (iii) the choice of cross-linking processes, can be finely tuned. In the present review, we mainly focused on calcium biomineralization. Besides regenerative medicine, these multifunctional materials have been largely exploited for other applications including 3D printable materials and in vitro three-dimensional (3D) models for cancer studies and for drug testing. Additionally, biomineralized multifunctional nano-particles can be involved in applications ranging from nanomedicine as fully bioresorbable drug delivery systems to the development of innovative and eco-sustainable UV physical filters for skin protection from solar radiations.

The present paper explores the effect of boric acid on Chitlac, a lactose-modified chitosan which had previously shown interesting biological and physical-chemical features. The herewith-reported experimental evidences demonstrated that boric acid binds to Chitlac, producing conformational and association effects on the chitosan derivative. The thermodynamics of boric acid binding to Chitlac was explored by means of 11B NMR, circular dichroism (CD), and UV–vis spectroscopy, while macromolecular effects were investigated by means of viscometry and dynamic light scattering (DLS). The experimental results revealed a chain–chain association when limited amounts of boric acid were added to Chitlac. However, upon exceeding a critical boric acid limit dependent on the polysaccharide concentration, the soluble aggregates disentangle. The rheological behavior of Chitlac upon treatment with boric acid was explored showing a dilatant behavior in conditions of steady flow. An uncommonly high dependence in the scaling law between the zero-shear viscosity and the concentration of Chitlac was found, i.e., η0 ∝ CCTL5.8, pointing to interesting potential implications of the present system in biomaterials development.

The present contribution deals with the synthesis and characterization of N-isopropyl chitosan in which the introduction of hydrophobic groups leads to an increased flexibility of the polysaccharide backbone. The isopropyl groups extend the solubility of the modified-chitosan samples and render the modified chitosan a pH- and thermo-sensitive system for hydrogel formation. Indeed, upon varying the pH of the system and/or its temperature within a range compatible with biological applications, a non-reversible sol-gel transition occurs, as determined through extended rheological analyses. The modified chitosan samples show a very good biocompatibility as determined through preliminary viability and cell growth experiments.

Mounting evidences have recognized that dual cross-link and double-network gels can promisingly recapitulate the complex living tissue architecture and overcome mechanical limitations of conventional scaffolds used hitherto in regenerative medicine. Here, dual cross-link gels formed of a bioactive lactose-modified chitosan reticulated via both temporary (boric acid-based) and permanent (genipin-based) cross-linkers are reported. While boric acid rapidly binds to lactitol flanking diols increasing the overall viscosity, a slow temperature-driven genipin binding process takes place allowing for network strengthening. Combination of frequency and stress sweep experiments in the linear stress-strain region shows that ultimate gel strength, toughness, and viscoelasticity depend on polymer-to-genipin molar ratio. Notably, herewith it is demonstrated that linear stretching correlates with strain energy dissipation through boric acid binding/unbinding dynamics. Strain-hardening effect in the nonlinear regime, along with good biocompatibility in vitro, points at an interesting role of present system as biological extracellular matrix substitute.

We report on a controlled process allowing for the gelation of a diol-rich chitosan-derivative named CTL (lactose-modified chitosan) in the presence of boric acid as the cross-linker. A two-step approach is described, namely (i) the mixing of CTL and boric acid at pH = 5, a condition where the inorganic component is mildly reactive; (ii) the addition of sodium bicarbonate (NaHCO3) as a trigger, allowing for the gradual and slow pH increase. The goal was to convert gradually the almost inert neutral boric acid into the much more reactive borate anion, the latter promoting the formation of borate esters with CTL diols. Gelling kinetics as well as mechanical behavior at small and large deformations was investigated by rheometry. CTL-boric acid gels behaved essentially as transient networks, hence continuously assembling and dissociating in a highly dynamic fashion. The present gelling mechanism preserves the strain-hardening behavior in the nonlinear region of stress-strain response, corroborating the already suggested potential applications of such gels as mimics of biological soft tissues.

The aim of the present contribution is twofold as it reports (i) on the role played by chitosan acetylation degree for the stability of nanoparticles (NPs) formed with hyaluronan and (ii) on the effect of the interaction of such NPs with immune cells. Chitosans with similar viscosity-average molecular weight, Mv, (i.e., 200 000) and different fractions of acetylated units (F A ) together with low-molecular-weight hyaluronan were chosen for developing a select library of formulations via electrostatic complex coacervation. The resulting NPs were analyzed in terms of size, polydispersity, surface charge, and stability in physiological-mimicked media by dynamic light scattering. Only medium acetylated chitosan (F A = 0.16) guaranteed the stability of NPs. To explore the effect of NPs interaction with immune cells, the release of proinflammatory cytokines and the reactive oxygen species production by human macrophages and neutrophils, respectively, were evaluated. Strikingly, a structure-function relationship emerged, showing that NPs made of chitosans with F A = 0.02, 0.25, 0.46, and 0.63 manifested a proinflammatory activity, linked to the instability of the system. Conversely, NPs made of chitosan with F A = 0.16 neither modified the functional response of macrophages nor that of neutrophils. Of note, such NPs were found to possess additional properties potentially advantageous in applications such as delivery of therapeutics to target inflamed sites: (i) they are devoid of cytotoxic effects, (ii) they avoid engulfment during the early stage of interaction with macrophages, and (iii) they are muco-adhesive, thereby providing for site-specificity and long-residence effects

L’invenzione concerne un procedimento per la preparazione di idrogeli di derivati oligosaccaridici del chitosano e di acido borico, che permette di formare idrogeli omogenei evitando la formazione di precipitati. Sotto un altro aspetto viene descritto un idrogelo ottenibile da tale procedimento. Vengono altresì descritti gli usi degli idrogeli in campo biomedico e farmaceutico, nelle applicazioni di viscosupplementazione, come sostituto della matrice extracellulare e come dispositivo di somministrazione di farmaci.

Herein, we synthetized and characterized polysaccharide-based complex coacervates starting from two water-soluble biopolymers, i.e., hydrochloride chitosans and sodium hyaluronan. We used chitosans encompassing a range of molecular weights from 30,000 to 400,000 and showing different fraction of acetylated units (i.e., FA = 0.16, 0.46, and 0.63). This set of chitosans was mixed with a low molecular weight hyaluronan to promote electrostatic interactions. Resulting colloids were analyzed in terms of size, polydispersity and surface charge by Dynamic Light Scattering. The weight ratio between the two polyelectrolytes was studied as additional parameter influencing the liquid-liquid phase separation. Main results include the following: the polymers weight ratio was fundamental in dictating the colloids surface charge, whereas chitosan physical-chemical features influenced the dimension and homogeneity of colloids. This contribution presents additional understanding of the complex coacervation between these two oppositely charged polysaccharides, with the potential translation of present system in food and biomedical sectors.

Galectins (Gal) are a family of glycan-binding proteins characterized by their affinity for β-galactosides. Galectin-1 (Gal-1), a dimeric lectin with two galactoside-binding sites, regulates cancer progression and immune responses. Coordination chemistry has been engaged to develop versatile multivalent neoglycoconjugates for binding Gal-1. In this study we report a fast and original method to synthesize hybrid gold nanoparticles in which a hydrochloride lactose-modified chitosan, named CTL, is mixed with dicarboxylic acid-terminated polyethylene glycol (PEG), leading to shell-like hybrid polymer-sugar-metal nanoparticles (CTL-PEG-AuNPs). The aim of this paper is to preliminarily study the interaction of the CTL-PEG-AuNPs with a target protein, namely, Gal-1, under specific conditions. The molecular interaction has been measured by Transmission Electron Microscopy (TEM), UV-vis, and Raman Spectroscopy on a large range of Gal-1 concentrations (from 0 to 10-12 M). We observed that the interaction was strongly dependent on the Gal-1 concentration at the surface of the gold nanoparticles.

Chitosan macro- and micro/nano-gels have gained increasing attention in recent years, especially in the biomedical field, given the well-documented low toxicity, degradability, and non-immunogenicity of this unique biopolymer. In this review we aim at recapitulating the recent gelling concepts for developing chitosan-based physical gels. Specifically, we describe how nowadays it is relatively simple to prepare networks endowed with different sizes and shapes simply by exploiting physical interactions, namely (i) hydrophobic effects and hydrogen bonds—mostly governed by chitosan chemical composition—and (ii) electrostatic interactions, mainly ensured by physical/chemical chitosan features, such as the degree of acetylation and molecular weight, and external parameters, such as pH and ionic strength. Particular emphasis is dedicated to potential applications of this set of materials, especially in tissue engineering and drug delivery sectors. Lastly, we report on chitosan derivatives and their ability to form gels. Additionally, we discuss the recent findings on a lactose-modified chitosan named Chitlac, which has proved to form attractive gels both at the macro- and at the nano-scale.

The present contribution aims at describing the fabrication of coacervates in the nano-size range starting from a 1-deoxylactit-1-yl chitosan (in this manuscript termed as CTL60) and the multivalent anion tripolyphosphate (TPP). Colloidal coacervates have been obtained for precise values of the molar ratio of TPP to CTL60 repeating unit. Coacervation is ensured only at pH 4.5 and not at 7.4, thus demonstrating the key role of electrostatic interactions in the stabilization of the coacervates. At a variance with chitosan, CTL60 favors the formation of highly homogeneous coacervates with very low values of the polydispersity index (PDI). Moreover, CTL60 coacervates can be freeze-dried without any cryoprotectant, they can host a model molecule and are stable up to three weeks at 4 °C. Conversely, such coacervates dissolve upon increasing pH and ionic strength. By considering the bioactive polycation CTL60, the present system can be suggested as a first step in the development of innovative biologically-active nano-carriers to be used as drug delivery systems