Search

Slow sand filters (SSF) are a simple water treatment technology providing an important alternative to conventional drinking water treatment. SSF are extensive in terms of carbon cost and chemical use but require a large land area and are complex to operate, as periodic cleaning is required to prevent filter clogging. Therefore, redundant SSF beds are required to enable water production to occur during long cleaning downtimes. Underwater skimming (UWS) is a cleaning innovation where the foulant layer (containing sand and particles) is removed using a skimmer consisting of a shrouded blade mounted on a vehicle platform. Sand, particles, and biofilm are skimmed prior to ex situ washing of the recovered sand. In this Viewpoint, we posit that the introduction of an in situ underwater skimmer operated remotely can substantially help to offset the aforementioned challenge of downtime, with its associated loss of production, enabling the technology to operate more efficiently and remain a pertinent and advantageous process option within modern water treatment facilities or possibly resource constrained settings. Otherwise, this resilient biotechnological process could be replaced by chemical and energy-intensive processes which increase the entropy of water treatment more than SSF. The anticipated benefits and challenges of UWS of SSF are discussed.

Organic pollution continues to contaminate river water and degrade aquatic ecosystems worldwide. In heavily modified river systems with high organic loading, sewage fungus, a heterotrophic biofilm, can form on the riverbed. The aim of this study was to determine how the polybacterial community of riverbed biofilms changes prior to and during a sewage fungus outbreak to inform the development of novel biomonitoring approaches. Riverbed biofilm samples were collected from a site that experienced sewage fungus outbreaks previously and an upstream control, following a BACI design. The polybacterial community was characterized using targeted amplicon sequencing (16s rRNA). The results indicate that the community became dominated by two genera prior to and during the sewage fungus outbreak, Rhodoferax and Sphaerotilus, which accounted for 32.8 and 14.2% of the relative abundance. When aggregated at a higher taxonomic level, the genetic data show that the community was comprised largely of bacteria from a single family, Comamonadaceae, totalling 64.1% of the relative abundance. Statistically significant differences in the polybacterial community over time and between impact and control sites provide initial evidence that genetic-based fingerprinting could be a promising biosentinel approach to identify organic pollution inputs and monitor their ecological impact.

open access article Inhibitory pathways in dry anaerobic digestion are still understudied and current knowledge on wet processes cannot be easily transferred. This study forced instability in pilot-scale digesters by operating at short retention times (40 and 33 days) in order to understand inhibition pathways over long term operation (145 days). The first sign of inhibition at elevated total ammonia concentrations (8 g/l) was a headspace hydrogen level over the thermodynamic limit for propionic degradation, causing propionic accumulation. The combined inhibitory effect of propionic and ammonia accumulation resulted in further increased hydrogen partial pressures and n-butyric accumulation. The relative abundance of Methanosarcina increased while that of Methanoculleus decreased as digestion deteriorated. It was hypothesized that high ammonia, total solids and organic loading rate inhibited syntrophic acetate oxidisers, increasing their doubling time and resulting in its wash out, which in turn inhibited hydrogenotrophic methanogenesis and shifted the predominant methanogenic pathway towards acetoclastic methanogenesis at free ammonia over 1.5 g/l. C/N increases to 25 and 29 reduced inhibitors accumulation but did not avoid inhibition or the washout of syntrophic acetate oxidising bacteria.

Bioremediation of metaldehyde from drinking water using metaldehyde-degrading strains has recently emerged as a promising alternative. Whole-genome sequencing was used to obtain full genomes for metaldehyde degraders Acinetobacter calcoaceticus E1 and Sphingobium CMET-H. For the former, the genetic context of the metaldehyde-degrading genes had not been explored, while for the latter, none of the degrading genes themselves had been identified. In A. calcoaceticus E1, IS91 and IS6-family insertion sequences (ISs) were found surrounding the metaldehyde-degrading gene cluster located in plasmid pAME76. This cluster was located in closely-related plasmids and associated to identical ISs in most metaldehyde-degrading β- and γ-Proteobacteria, indicating horizontal gene transfer (HGT). For Sphingobium CMET-H, sequence analysis suggested a phytanoyl-CoA family oxygenase as a metaldehyde-degrading gene candidate due to its close homology to a previously identified metaldehyde-degrading gene known as mahX. Heterologous gene expression in Escherichia coli alongside degradation tests verified its functional significance and the degrading gene homolog was henceforth called mahS. It was found that mahS is hosted within the conjugative plasmid pSM1 and its genetic context suggested a crossover between the metaldehyde and acetoin degradation pathways. Here, specific replicons and ISs responsible for maintaining and dispersing metaldehyde-degrading genes in α, β and γ-Proteobacteria through HGT were identified and described. In addition, a homologous gene implicated in the first step of metaldehyde utilisation in an α-Proteobacteria was uncovered. Insights into specific steps of this possible degradation pathway are provided., VCG was supported by the University of Costa Rica with a Scholarship for Doctoral Studies Abroad and the University of York with a Scholarship for Overseas Students. MPG-B is supported by grant PID2020-117923GB-I00 from the Spanish Ministry of Science and Innovation. JM is grateful for NERC award (NE/N009061/1) and Thames Water for supporting a scholarship for EF.

open access article Dry anaerobic digestion usually results in inhibitors accumulation, which can be solved by adapting operation. Multiple strategies targeting increased stability are implemented in full-scale, but impacts are poorly documented. Two full-scale dry AD plants treating organic fraction of municipal solid waste (OFMSW) were investigated: a semi-continuous plant with compost addition and a batch plant testing different percolate recirculation strategies and inoculum to substrate ratios. Regression tree analysis was used to evaluate the effect of these strategies on methane yields and inhibitors accumulation. Compost addition in the semi-continuous plant reduced volatile fatty acids content but dropped methane flow up to 10 % when compost constituted over 10.1 % in weight of the incoming feedstock. This reduction was linked to the limited availability of easily degradable material in the compost. In batch dry AD, methane yields increased as percolate recirculated raised up to a range of 182–197 m3 (0.342–0.363 m3/t of biomass mix). Recirculation of higher percolate volumes reduced methane production, probably linked to pile compaction and inhibitors accumulation. The ratio of OFMSW, digestate and woodchip (bulking agent) fed was determinant, and methane production was higher when digestate was over 43.1 %, waste between 45 % and 47.5 % and woodchip over 8.2 % in weight in as received basis. Woodchip influenced percolation through the pile and supported reduced total ammonia levels of 3.2 g/l when kept over 8.2 %, which raised to 5.2 g/l for lower values.

Pre-print of a viewpoint submitted to Environmental Science & Technology

Metaldehyde, a molluscicide pesticide, has been identified as a pollutant of concern due to its repeated detection in drinking water, thereby generating numerous compliance failures for water utilities. Biological degradation potential for metaldehyde is widespread in soils, occurring at different rates, but to date, no molecular methods for its assessment have been reported. Here, three genes belonging to a shared metaldehyde-degrading gene cluster present in bacteria were used as candidates for development of a quantitative PCR (qPCR) assay for assessing the metaldehyde-degrading potential in soil. Screening of gene targets, primer pairs and optimization of reaction conditions led to the development of a sensitive and specific probe-based qPCR method for quantifying the mahY metaldehyde-degrading gene from soil. The technique was tested across 8 soils with different compositions and origins. The degrading pathway was detected in 4/8 soils, in which a higher number of gene copies correlated with periods of greater metaldehyde removal. Additionally, swift elimination of the pesticide was observed in soils with an elevated initial number of mahY gene copies. The gene cluster was not detected in other soils, even though metaldehyde removal occurred, indicating that other biological degrading pathways are also important in nature. The method described here is the first one available to estimate the microbial metaldehyde degradation potential and activity in soils, and can also be used to detect degrading microorganisms in systems such as sand filters for water purification or to monitor degrading strains in engineered processes. Previous article in issue Universidad de Costa Rica/[]/UCR/Costa Rica Universidad de York/[]/UY/Reino Unido UCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias Básicas::Centro en Investigación en Contaminación Ambiental (CICA)

Most commercial swimming pools use pressurised filters, typically containing sand media, to remove suspended solids as part of the water treatment process designed to keep water attractive, clean and safe. The accidental release of faecal material by bathers presents a poorly quantified risk to the safety of swimmers using the pool. The water treatment process usually includes a combination of maintaining a residual concentration of an appropriate biocide in the pool together with filtration to physically remove particles, including microbial pathogens, from the water. However, there is uncertainty about the effectiveness of treatment processes in removing all pathogens, and there has been growing concern about the number of reported outbreaks of the gastrointestinal disease cryptosporidiosis, caused by the chlorine-resistant protozoan parasite Cryptosporidium. A number of interacting issues influence the effectiveness of filtration for the removal of Cryptosporidium oocysts from swimming pools. This review explains the mechanisms by which filters remove particles of different sizes (including oocyst-sized particles, typically 4–6 μm), factors that affect the efficiency of particle removal (such as filtration velocity), current recommended management practices, and identifies further work to support the development of a risk-based management approach for the management of waterborne disease outbreaks from swimming pools. This article has been made Open Access thanks to the generous support of a global network of libraries as part of the Knowledge Unlatched Select initiative.

Water contamination with dyes is harmful to humans and the environment. This study investigated the photocatalytic activity of natural clay (GOL) mixed with carbon nanotubes (CNT) for removal of brilliant black (BB) in wastewater. The materials were characterized with FESEM-EDS, XRD, XRF, FTIR and UV-vis DRS. The natural clay contains 2.34 % TiO2 which is 75% more than most natural clays. SEM showed that CNT were well dispersed and mixed with clay. DRS spectra showed two absorption bands above 380 nm. CNT in GOL has decreased significantly the energy band gaps from 2.75 and 3.25 eV to 1.53 and 2.90 eV for GOL and 10% CNT–GOL, respectively. Photocatalytic activity was enhanced with degradation of BB increased from 66 to 95% with GOL and 10% CNT–GOL respectively after 45 min of visible light irradiation. The improvement can be attributed to the synergy of the interface heterojunction of clay and CNT. The presence of CNT reduces the e− and h+ (e− / h+) pairs recombination and facilitates the production of reactive oxygen species responsible for the decay of dye. The addition of H2O2 to the experiment (2 mmoL) confirmed the role of holes and hydroxyl radicals. Eighty-five percent of BB carbon content was removed with 10% CNT–GOL suggesting that mineralization occurred. After 45 min of visible light irradiation, the degradation kinetic studies followed a second-order reaction with a R2 = 0.997. Therefore, natural clay–CNT nanocomposites can be applied to treat dyes containing wastewaters.

Clinical testing of children in schools is challenging, with economic implications limiting its frequent use as a monitoring tool of the risks assumed by children and staff during the COVID-19 pandemic. Here, a wastewater based epidemiology approach has been used to monitor 16 schools (10 primary, 5 secondary and 1 post-16 and further education for a total of 17 sites) in England. A total of 296 samples over 9 weeks have been analysed for N1 and E genes using qPCR methods. Of the samples returned, 47.3% were positive for one or both genes with a frequency of detection in line with the respective community. WBE offers a promising low cost, non-invasive approach for supplementing clinical testing and can offer longitudinal insights that are impractical with traditional clinical testing.

The presence of SARS-CoV-2 RNA in wastewater was first reported in March 2020. Over the subsequent months, the potential for wastewater surveillance to contribute to COVID-19 mitigation programmes has been the focus of intense national and international research activities, gaining the attention of policy makers and the public. As a new application of an established methodology, focused collaboration between public health practitioners and wastewater researchers is essential to developing a common understanding on how, when and where the outputs of this non-invasive community-level approach can deliver actionable outcomes for public health authorities. Within this context, the NORMAN SCORE “SARS-CoV-2 in sewage” database provides a platform for rapid, open access data sharing, validated by the uploading of 276 data sets from nine countries to-date. Through offering direct access to underpinning meta-data sets (and describing its use in data interpretation), the NORMAN SCORE database is a resource for the development of recommendations on minimum data requirements for wastewater pathogen surveillance. It is also a tool to engage public health practitioners in discussions on use of the approach, providing an opportunity to build mutual understanding of the demand and supply for data and facilitate the translation of this promising research application into public health practice. Validerad;2021;Nivå 2;2021-05-21 (alebob);Finansiär: För finansiärsinformation se Acknowledgements https://www.sciencedirect.com/science/article/pii/S0043135421003651?via%3Dihub#ack0001 DRIZZLE

COVID-19 is one of the biggest global public health challenges of the century with almost 42 million cases and more than a million deaths to date. Until a COVID-19 vaccine or effective pharmaceutical intervention is developed, alternative tools for the rapid identification, containment, and mitigation of the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are of paramount importance for managing community transmission. Within this context, school closure has been one of the strategies implemented to reduce spread at local and national levels. [...]

The efficacy of chlorine disinfection was assessed for the first time over a range of disinfection conditions using flow cytometry (FCM) to provide new insights into disinfection processes. Inactivation was assessed for pure culture bacteria (Escherichia coli) and micro-organisms in real treated water from operational water treatment works (WTWs). A dose dependent increase in inactivation rate (k) was observed for both test matrices, with values of 0.03 to 0.26 and 0.32 to 3.14 L/mg min for the WTW bacteria and E. coli, respectively. After 2 min, E. coli was reduced by 2 log for all chlorine doses (0.12 to 1.00 mg/L). In the case of the WTW filtrate bacteria, after 2 min log reductions were between 0.54 and 1.14 with increasing chlorine concentration, reaching between 1.32 and 2.33 after 30 min. A decrease in disinfection efficacy was observed as temperature decreased from 19 to 5 °C for both microbial populations. With respect to chlorination at different pH (pH 6, 7, 8), membrane damage was more pronounced at higher pH. This was not consistent with the higher disinfection efficacy seen at lower pH. when culture based methods are used to assess bacterial reductions. This provides evidence that more understanding into the fundamental mechanisms of chlorine disinfection are required and that methodological alterations may be required (e.g. pH standardisation) to fully utilise FCM over the entire range of chlorination conditions observed in operational environments.

Turbidity in water can be caused by a range of different turbidity causing materials (TCM). Here the characteristics and attachment of bacteria to TCMs was assessed and the resultant impact on UV disinfection determined. TCMs represent potential vehicles for bacterial penetration of water treatment barriers, contamination of potable supplies and impact on subsequent human health. The TCMs under investigation were representative of those that may be present in surface and ground waters, both from the source and formed in the treatment process. The TCMs were chalk, Fe (III) hydroxide precipitate, kaolin clay, manganese dioxide and humic acids, at different turbidity levels representative of source waters (0, 0.1, 0.2, 0.4, 1, 2, and 5 NTU). Escherichia coli and Enterococcus faecalis attachment followed the order of Fe(III) > chalk, with little to no attachment seen for MnO2, humic acids and clay. The attachment was postulated to be due to chalk and Fe(III) particles having a more neutral surface charge resulting in elevated aggregation with bacteria compared to other TCMs. The humic acids and Fe(III) were the TCMs which influenced inactivation of E. coli and E. faecalis due to decreasing UV transmittance (UVT) with increasing TCM concentration. The presence of the Fe(III) TCM at 0.2 NTU resulted in the poorest E. coli inactivation, with 2.5 log10 reduction at UV dose of 10 mJ cm− 2 (kd of − 0.23 cm2 mJ− 1) compared to a 3.9 log10 reduction in the absence of TCMs. E. faecalis had a greater resistance to UV irradiation than E. coli for all TCMs. Effective disinfection of drinking water is a priority for ensuring high public health standards. Uniform regulations for turbidity levels for waters pre-disinfection by UV light set by regulators may not always be appropriate and efficacy is dependent on the type, as well as the amount, of turbidity present in the water.

We review the risk of norovirus (NoV) infection to the human population from consumption of contaminated shellfish. From a UK perspective, risk is apportioned for different vectors of NoV infection within the population. NoV spreads mainly by person-to-person contact or via unsanitary food handling. NoV also enters the coastal zone via wastewater discharges resulting in contamination of shellfish waters. Typically, NoV persists in the marine environment for several days, with its presence strongly linked to human population density, wastewater discharge rate, and efficacy of wastewater treatment. Shellfish bioaccumulate NoV and current post-harvest depuration is inefficient in its removal. While NoV can be inactivated by cooking (e.g. mussels), consumption of contaminated raw shellfish (e.g. oysters) represents a risk to human health. Consumption of contaminated food accounts for 3-11% of NoV cases in the UK (~74,000 cases/year), of which 16% are attributable to oyster consumption (11,800 cases/year). However, environmental and human factors influencing NoV infectivity remain poorly understood. Lack of standard methods for accurate quantification of infective and non-infective (damaged) NoV particles represent a major barrier, hampering identification of an appropriate lower NoV contamination limit for shellfish. Future management strategies may include shellfish quality assessment (at point of harvest or at point of supply) or harvesting controls. However, poor understanding of NoV inactivation in shellfish and the environment currently limits accurate apportionment and risk assessment for NoV and hence the identification of appropriate shellfish or environmental quality standards.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Polar, low molecular weight pesticides such as metaldehyde are challenging and costly to remove from drinking water using conventional treatment methods. Although biological treatments can be effective at treating micropollutants, through biodegradation and sorption processes, only some operational biofilters have shown the ability to remove metaldehyde. As sorption plays a minor role for such polar organic micropollutants, biodegradation is therefore likely to be the main removal pathway. Here, the biodegradation of metaldehyde was monitored, and assessed, in an operational slow sand filter. Long-term data showed that metaldehyde degradation improved when inlet concentrations increased. A comparison of inactive and active sand batch reactors showed that metaldehyde removal happened mainly through biodegradation and that the removal rates were greater after the biofilm was acclimated through exposure to high metaldehyde concentrations. This suggested that metaldehyde removal was reliant on enrichment and that the process could be engineered to decrease treatment times (from days to hours). Through-flow experiments using fluidised bed reactors, showed the same behaviour following metaldehyde acclimation. A 40% increase in metaldehyde removal was observed in acclimated compared with non-acclimated columns. This increase was sustained for more than 40 days, achieving an average of 80% removal and compliance (< 0.1 µ L-1) for more than 20 days. An initial microbial analysis of the acclimated and non-acclimated biofilm from the same filter materials, showed that the microbial community in acclimated sand was significantly different. This work presents a novel conceptual template for a faster, chemical free, low cost, biological treatment of metaldehyde and other polar pollutants in drinking water. In addition, this is the first study to report kinetics of metaldehyde degradation in an active microbial biofilm at a WTW.

The file attached to this record is the author's final peer reviewed version. The Publisher's final version can be found by following the DOI link. Metaldehyde removal was delivered to below the 0.1 µg L-1 regulatory concentration in a laboratory scale continuous upflow fluidised sand bioreactor that had undergone acclimation through selective enrichment for metaldehyde degradation. This is the first reported case of successful continuous flow biological treatment of metaldehyde from real drinking water sources treating environmentally realistic metaldehyde concentrations. The impact of the acclimation process was impermanent, with the duration of effective treatment directly related to the elevated concentration of metaldehyde used during the enrichment process. The efficacy of the approach was demonstrated in continuous flow columns at both laboratory and pilot scale enabling degradation rates of between 0.1 and 0.2 mg L-1 h-1. Future work needs to focus on optimisation of the sand bioreactor and the acclimation process to ensure viability and feasibility of the approach at full scale.

The naphthoic acids are challenging and costly to remove from water and soil. 1-Hydroxy-2-Naphthoic acid (HNA) is a phenanthrene decomposition product from petroleum-contaminated environments during the aerobic decomposition of polyaromatic hydrocarbons. The hydrogeological mobility of hydrocarbon breakdown products represent a pollution risk (e.g. for drinking water sources). Adsorption to biochar produced from agricultural by-products is a useful strategy to remediate contaminated wastewaters. Here, we examine the controls on the HNA adsorption to the adsorbents magnetite, clay minerals, biochar and magnetite enriched companion materials, namely the influence of contact time, contaminant concentration and ionization effects at different pH. The adsorption of HNA was investigated using low-cost and readily available adsorbents: (i) wheat straw biochar, (ii) rice husk biochar, (iii) sugarcane biochar, (iv) zeolite, (v) montmorillonite, (vi) magnetite and their enriched magnetic companions. Magnetite enriched biochar exhibited greater adsorption rates compared with their nonmagnetic analogs for HNA. The maximum adsorption capacity of the magnetite enriched compounds (initial water concentration of 0.32 mmol HNA.L − 1 ) was 0.45 mmol.HNA.g − 1 of enriched zeolite. The magnetite enriched biochar and conventional biochar showed similar adsorption kinetics although magnetite enrichment improved the efficacy of adsorption. The adsorption fitted the pseudo-second order model in all cases, suggesting the dominant mechanism of adsorption was chemisorption. The magnetite enrichment reduced intra-particle diffusion, possibly due to fouling or blocking of pores within the particles, as evidenced by the decrease in diffusion rate constants. Overall, HNA adsorption improved after magnetic enrichment due to magnetite competing with inhibition sites on the biochar carriers. These findings translate into equivalence between magnetite and magnetic biochars, suggesting cheaper alternative materials could be synthesized in situ with the biochar acting as both an adsorbent and carrier, increasing the prospect of designer biochars for targeted pollutant removal. This approach has the potential to be used for wastewater treatment or for application as a soil additive for remediation of runoff from contaminated soils.

Biological processes for wastewater treatment is limited by extracellular enzyme activity (EEA) of the biofilm on polymeric substrates. The efficiency of biodegradation / biosorption mechanisms causing EEA and organic load removal in biofilms remains unknown. Our hypothesis was that the limiting step of biological process can be overcome by biostimulation and/or bioaugmentation of the return sludge in hybrid biofilm reactors, which leads to competition between suspended and attached bacteria and lower effective substrate to microrganism ratio. Therefore, we considered more active biosolids to perform best at enhancing reactor removal rate. To test this, the efficacy of recycling distinct bio-solids types considered to have different bacterial activity such as final effluent (FE), humus solids (HS) and recycle activated sludge (RAS) on performance improvements of rotating biofilm reactors (RBRs). These bio-solids were investigated under high organic loading rates (OLR) and solids loading rates (SLR) using pilot scale reactors receiving real municipal wastewaters. Controlled overloading of RBRs revealed that EEA improved with increasing OLR/SLR. High SLR (>3.3 kg Total Suspended Solids m−2 d−1) delayed and decreased the reduction of organic and inorganic removal rates in the biological processes which commonly occurs under high OLRs. This effect was more pronounced in the highest activity solids (RAS > HS > FE) suggesting the activity and function of bio-solids was critical to improve performance of RBRs. High OLR and SLR induced efficient denitrification and organics removal within the biofilm reactor at residence times of

Ammonia oxidising microorganisms (AOM) play an important role in ammonia removal in wastewater treatment works (WWTW) including rotating biological contactors (RBCs). Environmental factors within RBCs are known to impact the performance of key AOM, such that only some operational RBCs have shown ability for elevated ammonia removal. In this work, long-term treatment performance of seven full-scale RBC systems along with the structure and abundance of the ammonia oxidising bacteria (AOB) and archaea (AOA) communities within microbial biofilms were examined. Long term data showed the dominance of AOB in most RBCs, although two RBCs had demonstrable shift toward an AOA dominated AOM community. Next Generation Sequencing of the 16S rRNA gene revealed diverse evolutionary ancestry of AOB from RBC biofilms while nitrite-oxidising bacteria (NOBs) were similar to reference databases. AOA were more abundant in the biofilms subject to lower organic loading and higher oxygen concentration found at the distal end of RBC systems. Modelling revealed a distinct nitrogen cycling community present within high performing RBCs, linked to efficient control of RBC process variables (retention time, organic loading and oxygen concentration). We present a novel template for enhancing the resilience of RBC systems through microbial community analysis which can guide future strategies for more effective ammonia removal. To best of the author’s knowledge, this is the first comparative study reporting the use of next generation sequencing data on microbial biofilms from RBCs to inform effluent quality of small WWTW. Keywords: Biofilm, Rotating biological contactor, Nitrification, Wastewater treatment, Ammonia oxidising bacteria, Ammonia oxidising archaea

Trace micropollutants should be removed during drinking water production without increasing the disinfection-by-product formation potential or energy demand of the treatment process. We demonstrate the efficacy of different filtration media to remove metaldehyde through controlled batch experiments on water augmented with metaldehyde. Equilibrium concentrations of metaldehyde and surrogate organics were successfully described by the Freundlich isotherm. Metaldehyde can be attenuated to varying degrees with activated carbon and sand with an active and inactive biofilm with kf values ranging from 0.006–0.3 (mg g−1)(L mg−1)1/n. The presence of the active biofilm improved metaldehyde adsorption by sand media, due to additional biosorption mechanisms, a greater surface area or biodegradation. Baseline levels of competing natural organic matter surrogates (NOM) reduced overall adsorption efficacy but increasing concentrations of NOM did not impact metaldehyde removal efficacy in a significant way. Biological activated carbon was identified as the most suitable adsorbent of metaldehyde (94% removal) but sand with an acclimated biofilm was capable of acting as a bio-adsorbent of metaldehyde even under environmentally relevant concentrations (41% adsorption from 0.002.5 mg L−1). Moreover, we observed that thermal hydrolysis of metaldehyde occurred at 60 °C, suggesting that thermal regeneration of GAC for this pesticide was possible at relatively low temperatures. Biological adsorption and thermal hydrolysis approaches presented herein offered a way forward to increase efficiency and cost effectiveness of existing treatments for metaldehyde.

To assess fecal pollution in coastal waters, current monitoring is reliant on culture-based enumeration of bacterial indicators, which does not account for the presence of viable but non-culturable or sediment-associated micro-organisms, preventing effective quantitative microbial risk assessment (QMRA). Seasonal variability in viable but non-culturable or sediment-associated bacteria challenge the use of fecal indicator organisms (FIOs) for water monitoring. We evaluated seasonal changes in FIOs and human enteric pathogen abundance in water and sediments from the Ribble and Conwy estuaries in the UK. Sediments possessed greater bacterial abundance than the overlying water column, however, key pathogenic species (Shigella spp., Campylobacter jejuni, Salmonella spp., hepatitis A virus, hepatitis E virus and norovirus GI and GII) were not detected in sediments. Salmonella was detected in low levels in the Conwy water in spring/summer and norovirus GII was detected in the Ribble water in winter. The abundance of E. coli and Enterococcus spp. quantified by culture-based methods, rarely matched the abundance of these species when measured by qPCR. The discrepancy between these methods was greatest in winter at both estuaries, due to low CFU's, coupled with higher gene copies (GC). Temperature accounted for 60% the variability in bacterial abundance in water in autumn, whilst in winter salinity explained 15% of the variance. Relationships between bacterial indicators/pathogens and physicochemical variables were inconsistent in sediments, no single indicator adequately described occurrence of all bacterial indicators/pathogens. However, important variables included grain size, porosity, clay content and concentrations of Zn, K, and Al. Sediments with greater organic matter content and lower porosity harbored a greater proportion of non-culturable bacteria (including dead cells and extracellular DNA) in winter. Here, we show the link between physicochemical variables and season which govern culturability of human enteric pathogens and FIOs. Therefore, knowledge of these factors is critical for accurate microbial risk assessment. Future water quality management strategies could be improved through monitoring sediment-associated bacteria and non-culturable bacteria. This could facilitate source apportionment of human enteric pathogens and FIOs and direct remedial action to improve water quality.

The rate-limiting step of wastewater treatment is the breakdown of polymers by extracellular enzyme activity (EEA). The efficacy of EEA on biomass from full scale conventional activated sludge (AS) and modified AS with bench scale and full scale rotating biofilm reactors (RBR) was compared. The maximum amino-peptidase EEA was 394 ± 34 μmolL

Decline-diseases are complex and becoming increasingly problematic to tree health globally. Acute Oak Decline (AOD) is characterized by necrotic stem lesions and galleries of the bark-boring beetle, Agrilus biguttatus, and represents a serious threat to oak. Although multiple novel bacterial species and Agrilus galleries are associated with AOD lesions, the causative agent(s) are unknown. The AOD pathosystem therefore provides an ideal model for a systems-based research approach to address our hypothesis that AOD lesions are caused by a polymicrobial complex. Here we show that three bacterial species, Brenneria goodwinii, Gibbsiella quercinecans and Rahnella victoriana, are consistently abundant in the lesion microbiome and possess virulence genes used by canonical phytopathogens that are expressed in AOD lesions. Individual and polyspecies inoculations on oak logs and trees demonstrated that B. goodwinii and G. quercinecans cause tissue necrosis and, in combination with A. biguttatus, produce the diagnostic symptoms of AOD. We have proved a polybacterial cause of AOD lesions, providing new insights into polymicrobial interactions and tree disease. This work presents a novel conceptual and methodological template for adapting Koch’s postulates to address the role of microbial communities in disease.

The accurate detection of pathogens in environmental matrices, such as sediment, is critical in understanding pathogen fate and behavior in the environment. In this study we assessed the usefulness of methods for the detection and quantification of Vibrio spp. and norovirus (NoV) nucleic acids in sediment. For bacteria, a commonly used direct method using hexadecyltrimethylammonium bromide (CTAB) and phenol-chloroform-isoamyl alcohol (PCI) extraction was optimized, whereas for NoV, direct and indirect (virus elution – concentration) methods were evaluated. For quantification, commercially available quantitative PCR (qPCR) and reverse transcription qPCR (RT-qPCR) kits were tested alongside a digital PCR (dPCR) approach. CTAB-based extraction combined with 16 h polyethylene glycol 6000 (PEG6000) precipitation was found to be suitable for the direct extraction of high abundance bacterial and viral nucleic acids. For the indirect extraction of viral RNA, beef extract-based elution followed by PEG6000 precipitation and extraction using the NucliSENS® MiniMag® Nucleic Acid Purification System and the PowerViral® Environmental RNA/DNA Isolation Kit and qRT-PCR resulted in 83 – 112% and 63 – 69% recoveries of NoV, respectively. dPCR resulted in lower viral recoveries (47% and 9%) and approx. four orders of magnitude lower Vibrio concentrations (3.6 – 4.6 log10 gc/100 g sediment) than was observed using qPCR. The use of internal controls during viral quantification revealed that the RT step was more affected by inhibitors than the amplification. The methods described here are suitable for the enumeration of viral and/or bacterial pathogens in sediment, however the use of internal controls to assess efficiency is recommended.

The impact of organic loading rate (OLR) on carbonaceous materials and ammonia removal was assessed in bench scale rotating media biofilm reactors treating real wastewater. Media composition influences biofilm structure and therefore performance. Here, plastic mesh, reticulated coarse foam and fine foam media were operated concurrently at OLRs of 15, 35 and 60 g sCOD m(-2)d(-1) in three bench scale shaft mounted advanced reactor technology (SMART) reactors. The sCOD removal rate increased with loading from 6 to 25 g sCOD m(-2)d(-1) (P0.001). At 35 g BOD5m(-2)d(-1), more than double the arbitrary OLR limit of normal nitrifying conditions (15 g BOD5m(-2)d(-1)); the removal efficiency of NH(4)-N was 82 ± 5, 27 ± 19 and 39 ± 8% for the mesh, coarse foam and fine foam media, respectively. Increasing the OLR to 35 gm(-2)d(-1) decreased NH(4)-N removal efficiency to 38 ± 6, 21 ± 4 and 21 ± 6%, respectively. The mesh media achieved the highest stable NH(4)(+)-N removal rate of 6.5 ± 1.6 gm(-2)d(-1) at a sCOD loading of 35 g sCOD m(-2)d(-1). Viable bacterial numbers decreased with increasing OLR from 2 × 10(10)-4 × 10(9) cells per ml of biofilm from the low to high loading, suggesting an accumulation of inert non-viable biomass with higher OLR. Increasing the OLR in permeable media is of practical benefit for high rate carbonaceous materials and ammonia removal in the pretreatment of wastewater.

Rotating biological contactors (RBCs) for wastewater treatment began in the 1970s. Removal of organic matter has been targeted within organic loading rates of up to 120 g m−2 d−1 with an optimum at around 15 g m−2 d−1 for combined BOD and ammonia removal. Full nitrification is achievable under appropriate process conditions with oxidation rates of up to 6 g m−2 d−1 reported for municipal wastewater. The RBC process has been adapted for denitrification with reported removal rates of up to 14 g m−2 d−1 with nitrogen rich wastewaters. Different media types can be used to improve organic/nitrogen loading rates through selecting for different bacterial groups. The RBC has been applied with only limited success for enhanced biological phosphorus removal and attained up to 70% total phosphorus removal. Compared to other biofilm processes, RBCs had 35% lower energy costs than trickling filters but higher demand than wetland systems. However, the land footprint for the same treatment is lower than these alternatives. The RBC process has been used for removal of priority pollutants such as pharmaceuticals and personal care products. The RBC system has been shown to eliminate 99% of faecal coliforms and the majority of other wastewater pathogens. Novel RBC reactors include systems for energy generation such as algae, methane production and microbial fuel cells for direct current generation. Issues such as scale up remain challenging for the future application of RBC technology and topics such as phosphorus removal and denitrification still require further research. High volumetric removal rate, solids retention, low footprint, hydraulic residence times are characteristics of RBCs. The RBC is therefore an ideal candidate for hybrid processes for upgrading works maximising efficiency of existing infrastructure and minimising energy consumption for nutrient removal. This review will provide a link between disciplines and discuss recent developments in RBC research and comparison of recent process designs are provided (Section 2 ). The microbial features of the RBC biofilm are highlighted (Section 3 ) and topics such as biological nitrogen removal and priority pollutant remediation are discussed (Sections 4 Biological nutrient removal in RBCs , 5 Priority pollutant remediation in RBCs ). Developments in kinetics and modelling are highlighted (Section 6 ) and future research themes are mentioned.

The impact of solids retention time (SRT) on estrone (E1), 17β-estradiol (E2), estriol (E3) and 17α-ethinylestradiol (EE2) removal in an activated sludge plant (ASP) was examined using a pilot plant to closely control operation. Ex situ analytical methods were simultaneously used to enable discrimination of the dominant mechanisms governing estrogen removal following transitions in SRT from short (3 d) to medium (10 d) and long (27 d) SRTs which broadly represent those encountered at full-scale. Total estrogen (∑ EST , i.e., sum of E1, E2, E3 and EE2) removals which account for aqueous and particulate concentrations were 70 ± 8, 95 ± 1 and 93 ± 2% at 3, 10 and 27 d SRTs respectively. The improved removal observed following an SRT increase from 3 to 10 d was attributable to the augmented biodegradation of the natural estrogens E1 and E2. Interestingly, estrogen biodegradation per bacterial cell increased with SRT. These were 499, 1361 and 1750 ng 10 12 viable cells −1 d −1 . This indicated an improved efficiency of the same group or the development of a more responsive group of bacteria. In this study no improvement in absolute ∑ EST removal was observed in the ASP when SRT increased from 10 to 27 d. However, batch studies identified an augmented biomass sorption capacity for the more hydrophobic estrogens E2 and EE2 at 27 d, equivalent to an order of magnitude. The lack of influence on estrogen removal during pilot plant operation can be ascribed to their distribution within activated sludge being under equilibrium. Consequently, lower wastage of excess sludge inherent of long SRT operation counteracts any improvement in sorption.