Search

The dual role of nitrogen bases is shown in the ARGET ATRP with ascorbic acid acetonide. High pKa bases lead to more ascorbate anion (faster polymerizations) but in presence of oxygen/water are detrimental to the catalyst (hydroxide formation).

Over the past two decades, the chirality-induced spin selectivity (CISS) effect was reported in several experiments disclosing a unique connection between chirality and electron spin. Recent theoretical works have highlighted time-resolved Electron Paramagnetic Resonance (trEPR) as a powerful tool to directly detect the spin polarisation resulting from CISS. Because of the absence of interfaces with conducting electrodes, such spectroscopic evidence could provide a clear understanding of how CISS works at the intramolecular level. Experimental results have demonstrated the potential of this approach for detecting a spin-polarised photoinduced electron transfer (ET) in hybrid systems comprising a CdSe quantum dot as an electron donor (D) connected by a chiral linker (χ) to a fullerene derivative as an electron acceptor (A). However, the study of the ET process in fully organic D-χ-A dyads holds tremendous potential for the unambiguous detection of CISS. Here, we report a first attempt performed using novel D-χ-A dyads, comprising pyrene (D) and fullerene (A) connected by chiral saturated peptide bridges (χ) of different length and electric dipole moment. The dyads are investigated by an array of techniques, including cyclic voltammetry, optical spectroscopies, and trEPR. Despite the promising energy alignment of the electronic levels and the evidence of luminescence quenching, trEPR does not detect a significant ET highlighting the challenges of spectroscopic detection of CISS. However, the analysis allows the formulation of guidelines for the design of chiral organic model systems suitable to directly probe CISS-polarised ET.

Controlled reduction of oxygen is important for developing clean energy technologies, such as fuel cells, and is vital to the existence of aerobic organisms. The process starts with oxygen in a triplet ground state and ends with products that are all in singlet states. Hence, spin constraints in the oxygen reduction must be considered. Here, we show that the electron transfer efficiency from chiral electrodes to oxygen (oxygen reduction reaction) is enhanced over that from achiral electrodes. We demonstrate lower overpotentials and higher current densities for chiral catalysts versus achiral ones. This finding holds even for electrodes composed of heavy metals with large spin–orbit coupling. The effect results from the spin selectivity conferred on the electron current by the chiral assemblies, the chiral-induced spin selectivity effect.

Applying magnetic substrates, magnetized perpendicular to the surface, we were able to crystallize from racemic solution pure conglomerates of several molecules. The resolution is based on the spin...

Monolayers of chiral molecules can preferentially transmit electrons with a specific spin orientation, introducing chiral molecules as efficient spin filters. This phenomenon is established as chirality-induced spin selectivity (CISS) and was demonstrated directly for the first time in self-assembled monolayers (SAMs) of double-stranded DNA (dsDNA)1 . Here, we discuss SAMs of double-stranded peptide nucleic acid (dsPNA) as a system which allows for systematic investigations of the influence of various molecular properties on CISS. In photoemission studies, SAMs of chiral, γ-modified PNA show significant spin filtering of up to P = (24.4 ± 4.3)% spin polarization. The polarization values found in PNA lacking chiral monomers are considerably lower at about P = 12%. The results confirm that the preferred spin orientation is directly linked to the molecular handedness and indicate that the spin filtering capacity of the dsPNA helices might be enhanced by introduction of chiral centers in the constituting peptide monomers.

Squaraine dyes are well known for their strong absorption in the visible regime. Reports on chiral squaraine dyes are, however, scarce. To address this gap, we here report two novel chiral squaraine dyes and their achiral counterparts. The presented dyes are aggregated in solution and in thin films. A detailed chiroptical study shows that thin films formed by co‐assembling the chiral dye with its achiral counterpart exhibit exceptional photophysical properties. The circular dichroism (CD) of the co‐assembled structures reaches a maximum when just 25 % of the chiral dye are present in the mixture. The solid structures with the highest relative CD effect are achieved when the chiral dye is used solely as a director, rather than the structural component. The chiroptical data are further supported by selected spin‐filtering measurements using mc‐AFM. These findings provide a promising platform for investigating the relationship between the dissymmetry of a supramolecular structure and emerging material properties rather than a comparison between a chiral molecular structure and an achiral counterpart., Helicity control: An unexpected outcome of the co‐assembly of achiral squaraine dye a‐SQ‐1 with its chiral counterpart S ‐SQ‐1 is reported. A maximum in optical activity is observed in the supramolecular aggregates of a 3:1 mixture with a‐SQ‐1 as the major component. Intriguingly, the highest spin‐selective electron transport is observed for this mixing ratio as well, illustrating the direct relationship between optical activity and spin‐selective electron transport.

The electronic properties of conducting polymers are influenced by their micro- and macrostructural orders, which can be tailored by substituent modification. However, while the effect of substituents on conducting polymers is extensively investigated, chiral substituents are far less studied. Furthermore, many chiral conducting polymers have regioirregular structures, which result in polymer films with inferior properties. In this work, we apply electronic circular dichroism (ECD) spectroscopy to study the morphological changes to the chiral polymers under different polymerization conditions. For this purpose, we investigated 3,4-ethylenedioxythiophene (EDOT) derivatives having two stereogenic centers on each monomer and bearing methyl or phenyl side groups (dimethyl-EDOT and diphenyl-EDOT, respectively). Polymerizing the enantiomerically pure monomers produces regioregular and stereoregular dimethyl-PEDOT and diphenyl-PEDOT, respectively. The effect of the electrolyte and solvent on polymer film morphology was studied using scanning electron microscopy (SEM) and ECD, showing a correlation between the polymer's morphology and the chiroptical properties of its films. We found that, for diphenyl-PEDOT, the combination of perchlorate anion electrolyte and acetonitrile solvent resulted in a unique morphology characterized by significant intermolecular interactions. These interactions were clearly observable in the ECD spectra in the form of exciton couplings, whose presence was supported by TD-DFT calculations. A small enantiomeric excess was sufficient to induce very intense ECD signals, demonstrating chiral amplification in electropolymerized films.

The electro-oxidative polymerization of an enantiopure chiral 3,4-ethylenedioxythiophene monomer, performed using spin-polarized currents, is shown to depend on the electron spin orientation. The s...

Significance In contrast to conventional electronics, spintronics devices exploit the electron spin as an additional degree of freedom. The chirality-induced spin selectivity (CISS) effect, in which chiral molecules act as spin filters in electron transport, provides a pathway to control spins in molecules. We describe an approach that integrates both spin-polarizing and spin-propagating functionality into organic structures that feature low charge transport resistances. Binding chiral ligands to molecular wires controls polarized spin handedness, regulates spin currents, generates large NIR rotational strengths, and provides a mechanism to flip the favored spin orientation for spin transmission through chiral organic molecules. This work points the way to materials that provide both high spin selectivity and large-magnitude spin currents via the CISS mechanism.

We describe the spin polarization–induced chirogenic electropolymerization of achiral 2-vinylpyridine, which forms a layer of enantioenhanced isotactic polymer on the electrode. The product formed is enantioenriched in asymmetric carbon polymer. To confirm the chirality of the polymer film formed on the electrode, we also measured its electron spin polarization properties as a function of its thickness. Two methods were used: First, spin polarization was measured by applying magnetic contact atomic force microscopy, and second, magnetoresistance was assessed in a sandwich-like four-point contact structure. We observed high spin-selective electron transmission, even for a layer thickness of 120 nm. A correlation exists between the change in the circular dichroism signal and the change in the spin polarization, as a function of thickness. The spin-filtering efficiency increases with temperature.

We show that enantioselective reactions can be induced by the electron spin itself and that it is possible to replace a conventional enantiopure chemical reagent by spin-polarized electrons that provide the chiral bias for enantioselective reactions. Three examples of enantioselective chemistry resulting from electron-spin polarization are presented. One demonstrates the enantioselective association of a chiral molecule with an achiral self-assembled monolayer film that is spin-polarized, while the other two show that the chiral bias provided by the electron helicity can drive both reduction and oxidation in enantiospecific electrochemical reactions. In each case, the enantioselectivity does not result from enantiospecific interactions of the molecule with the ferromagnetic electrode but from the polarized spin that crosses the interface between the substrate and the molecule. Furthermore, the direction of the electron-spin polarization defines the handedness of the enantioselectivity. This work demonstrates a new mechanism for realizing enantioselective chemistry.

Controlled reduction of oxygen is important for developing clean energy technologies, such as fuel cells, and is vital to the existence of aerobic organisms. The process starts with oxygen in a triplet ground state and ends with products that are all in singlet states. Hence, spin constraints in the oxygen reduction must be considered. Here we show that electron transfer from chiral electrodes to oxygen (oxygen reduction reaction) is enhanced over that from achiral electrodes. We demonstrate lower overpotentials and higher current densities for chiral catalysts versus achiral ones. This finding holds even for electrodes composed of heavy metals with large spin orbit coupling. The effect results from the spin selectivity conferred on the electron current by the chiral assemblies, the chiral induced spin selectivity effect.

The theoretical explanation for the chiral-induced spin selectivity effect, in which electrons' passage through a chiral system depends on their spin and the handedness of the system, remains vague. Although most experimental work was performed at room temperature, most of the proposed theories did not include vibrations. Here, we present temperature-dependent experiments and a theoretical model that captures all observations and provides spin polarization values that are consistent with the experimental results. The model includes vibrational contribution to the spin orbit coupling. It shows the importance of dissipation and the relation between the effect and the optical activity., 16 pages, 4 figure; submitted

Enantiospecific crystallization of the three amino acids asparagine (Asn), glutamic acid hydrochloride (Glu·HCl) and threonine (Thr), induced by ferromagnetic (FM) substrates, is reported., Enantiospecific crystallization of the three amino acids asparagine (Asn), glutamic acid hydrochloride (Glu·HCl) and threonine (Thr), induced by ferromagnetic (FM) substrates, is reported. The FM substrates were prepared by evaporating nickel capped with a thin gold layer on standard silicon wafers. Magnets were positioned underneath the substrate with either their North (N) or South (S) poles pointing up. Asymmetric induction, controlled by the magnetic substrates, was demonstrated for the crystallization of the pure enantiomers and was then extended for the racemic mixtures of Asn and Glu·HCl. In the case of the solution of the pure enantiomers, the l enantiomer was crystallized preferentially at one pole of the magnet and the d enantiomer at the other. Consequently, the racemates of Asn and Glu·HCl undergo separation under the influence of the magnetic substrate. With Thr, however, despite the enantiospecific interactions of the pure enantiomers with the FM, no separation of the emerging crystals could be achieved with the racemates, although they crystallize as conglomerates, implying differences taking place in the crystallization step. The results reported here are not directly related to the magnetic field, but rather to the aligned spins within the ferromagnets. The findings provide a novel method for resolving enantiomers by crystallization and offer a new perspective for a possible role played by magnetic substrates regarding the origin of chirality in nature.

The steady-state charge and spin transfer yields were measured for three different Ru-modified azurin derivatives in protein films on silver electrodes. While the charge-transfer yields exhibit weak temperature dependences, consistent with operation of a near activation-less mechanism, the spin selectivity of the electron transfer improves as temperature increases. This enhancement of spin selectivity with temperature is explained by a vibrationally induced spin exchange interaction between the Cu(II) and its chiral ligands. These results indicate that distinct mechanisms control charge and spin transfer within proteins. As with electron charge transfer, proteins deliver polarized electron spins with a yield that depends on the protein’s structure. This finding suggests a new role for protein structure in biochemical redox processes.

The spin&ndash, spin interactions between chiral molecules and ferromagnetic metals were found to be strongly affected by the chiral induced spin selectivity effect. Previous works unraveled two complementary phenomena: magnetization reorientation of ferromagnetic thin film upon adsorption of chiral molecules and different interaction rate of opposite enantiomers with a magnetic substrate. These phenomena were all observed when the easy axis of the ferromagnet was out of plane. In this work, the effects of the ferromagnetic easy axis direction, on both the chiral molecular monolayer tilt angle and the magnetization reorientation of the magnetic substrate, are studied using magnetic force microscopy. We have also studied the effect of an applied external magnetic field during the adsorption process. Our results show a clear correlation between the ferromagnetic layer easy axis direction and the tilt angle of the bonded molecules. This tilt angle was found to be larger for an in plane easy axis as compared to an out of plane easy axis. Adsorption under external magnetic field shows that magnetization reorientation occurs also after the adsorption event. These findings show that the interaction between chiral molecules and ferromagnetic layers stabilizes the magnetic reorientation, even after the adsorption, and strongly depends on the anisotropy of the magnetic substrate. This unique behavior is important for developing enantiomer separation techniques using magnetic substrates.

Magnetoelectrochemistry is a branch of electrochemistry where magnetic fields play a vital role in the oxidation and reduction process of the molecules. When it comes to spin-dependent electrochemistry (SDE), becomes a new paradigm. This work presents electrochemical response during the “chiral imprinting” on working electrodes and the effects of potentiostatic and galvanostatic methods. We explore the use of the SDE concept, which is implemented for chiral-ferromagnetic (CFM) hybrid working electrodes, and we compare various electrochemical parameters affecting the quality of deposition. We electrochemically co-deposited nickel (Ni) with a chiral compound (tartaric acid) in its enantiopure forms (L and D), which allows us to obtain a chiral co-deposited nickel-tartaric acid (Ni-LTA or Ni-DTA) working electrode.

The effect of an electric field on the adsorption of oligopeptides and DNA on a ferromagnetic substrate magnetized perpendicular to the surface was investigated. The direction of the magnetic moment of the substrate defines different adsorption rates for different enantiomers, and the direction of the electric field, perpendicular to the surface, defines different adsorption rates depending on the direction of the dipole moment of the adsorbed molecules.

Taking enantiomers for a spin There are two common ways to distinguish mirror-image molecules, or enantiomers. The first relies on their distinct interactions with circularly polarized light, the second on their interactions with a pure enantiomer of some other molecule. Now Banerjee-Ghosh et al. report a conceptually different approach to chiral resolution. Experiments showed that, depending on the direction of magnetization, chiral oligopeptides, oligonucleotides, and amino acids have enantiospecific differences in initial adsorption rates on ferromagnetic surfaces. This effect is attributed to enantiospecific induced spin polarization. Science , this issue p. 1331

It is shown that "spontaneous magnetization" occurs when chiral oligopeptides are attached to ferrocene and are self-assembled on a gold substrate. As a result, the electron transfer, measured by electrochemistry, shows asymmetry in the reduction and oxidation rate constants; this asymmetry is reversed between the two enantiomers. The results can be explained by the chiral induced spin selectivity of the electron transfer. The measured magnetization shows high anisotropy and the "easy axis" of magnetization is along the molecular axis.

The production of hydrogen through water splitting in a photoelectrochemical cell suffers from an overpotential that limits the efficiencies. In addition, hydrogen-peroxide formation is identified as a competing process affecting the oxidative stability of photoelectrodes. We impose spin-selectivity by coating the anode with chiral organic semiconductors from helically aggregated dyes as sensitizers; Zn-porphyrins and triarylamines. Hydrogen peroxide formation is dramatically suppressed, while the overall current through the cell, correlating with the water splitting process, is enhanced. Evidence for a strong spin-selection in the chiral semiconductors is presented by magnetic conducting (mc-)AFM measurements, in which chiral and achiral Zn-porphyrins are compared. These findings contribute to our understanding of the underlying mechanism of spin selectivity in multiple electron-transfer reactions and pave the way toward better chiral dye-sensitized photoelectrochemical cells.

This review reports the synthesis and the properties of chiral polythiophenes (PTs) and in particular it is focused on PTs bearing a sulfur atom directly bonded to the thiophene ring. These polymers show remarkable properties, related to their chirality and electrical conductivity and to the ability to interact with chiral molecules opening the possibility for using them in new potential applications, like chiral sensors, chiral resolution and electrodes.

Efficient photoelectrochemical production of hydrogen from water is the aim of many studies in recent decades. Typically, one observes that the electric potential required to initiate the process significantly exceeds the thermodynamic limit. It was suggested that by controlling the spins of the electrons that are transferred from the solution to the anode, and ensuring that they are co-aligned, the threshold voltage for the process can be decreased to that of the thermodynamic voltage. In the present study, by using anodes coated with chiral conductive polymer, the hydrogen production from water is enhanced and the threshold voltage is reduced, as compared with anodes coated with achiral polymer. When CdSe quantum dots were embedded within the polymer, the current density was doubled. These new results point to a possible new direction for producing inexpensive, environmental friendly, efficient water splitting photoelectrochemical cells.

Studies on conjugated polymers seldom report on their NMR characterization in solution. This paper shows how NMR experiments, both 1H NMR and routine 2D NMR spectra, can help in gaining a further insight into the aggregation behavior of conjugated polymers and could be used to flank the more employed solid-state NMR and other spectroscopy and microscopy techniques in the understanding of the aggregation processes. NMR spectroscopy allows distinguishing, within the class of poorly solvatochromic conjugated polymers, those highly prone to form π-stacked aggregates from the ones that have a low tendency toward π-stacking.

The electrochemically assisted grafting process of glassy carbon (GC) surfaces is pursued by using the 7-[(5,5′-diiodo-2,2′-bithiophen-4-yl)sulfanyl]heptanenitrile (DIBHN). Which is an ad hoc synthesized bithiophene derivative: the DIBHN features two non-equivalent iodine substituents in the 5 (which is under the sterical hindrance of the sulfanylheptanenitrile group) and 5′ positions. CV measurements show the occurrence of two reduction processes, the second, more cathodic one, induces the grafting. This result is in qualitative agreement with theoretical calculations (B3LYP/6-311G ** level of the theory) concerning the comparison of the optimized structures of the DIBHN neutral and radical anion species (first electroreduction process): the C–I bond length of the iodine in the 5 position varies from 2.098 (neutral) to 2.835 A (radical anion), while the C–I bond length of the iodine in the 5′ position remains virtually unchanged when comparing the geometries of the neutral and radical anion structures. Raman spectra are recorded for various polymer film thicknesses; the comparison with theoretical calculated Raman spectra further support the effective grafting of the glassy carbon surface.

DOI: 10.1002/adma.201405249 electrode. By controlling the direction of the magnetization of nickel, it is possible to inject electrons that have mainly one spin orientation and to verify their transport through the PCT by monitoring the cyclic voltammetry (CV) curve in the electrochemical cell in which the redox couple is not chiral. The CV curves refl ect a steady state in which a double layer is formed near the working electrode. Another method to monitor the spin selectivity is by chronoamperometry, in which one monitors time-dependent current at a fi xed potential. At the beginning, when the potential is turned on, the current is high, but it is reduced with time due to the formation of the double layer. [ 18,19 ]

We investigated the effect of an electric field on the alignment and structural properties of thin films of a chiral polybithiophene-based conductive polymer, functionalized with a protected l-cysteine amino acid. Thin films were obtained by exploiting both drop-casting and spin-coating procedures. The electric properties, the polarized Raman spectrum, the UV–vis spectrum, and the CD spectra were measured as a function of the electric field intensity applied during film formation. It was found that beyond the enhancement of the conductivity observed when the electric field aligns the polymer, the electric field significantly affects the chiral properties and the effect depends on the method of deposition.

The co-adsorption of sodium dodecyl sulfate (SDS) and sodium dodecylbenzenesulfonate (SDBS), on the 1-decanethiol self-assembled monolayer (SAM)-functionalized polycrystalline gold surface, is investigated by electrochemical techniques. The peak current (cyclic voltammetry) and charge transfer resistance (impedance spectra) variations are measured, concerning the [Fe(CN)6]3−/[Fe(CN)6]4− couple redox process. SDBS is found to yield a more efficient inhibiting barrier (towards the charge transfer process), when compared to the SDS one. Thus, it is suggesting that a higher tendency of SDBS to be co-adsorbed within the 1-decanethiol SAM with respect to SDS.

GC/OligoThiophene/Ag(NP) hybrid interfaces are synthesized and characterized: GC is the glassy carbon surface; OligoThiophene stands for both an ultrathin bithiophene grafted film and a 4-Br-Bithiophene grafted polymer; Ag(NP) stands for silver nanoparticles. The hybrid interface preparation involves different steps: first, the electrode surface is functionalized through a combination of electrochemically assisted grafting (under reduction regime) and polymerization (under oxidation regime); then, silver nanoparticles are chemisorbed by dipping. In particular, an ultrathin film of grafted bithiophene can be obtained by applying one cyclic voltammetry reduction cycle (GC/BT surface), while subsequent cyclic voltammetry cycling under oxidation regime yields an immobilized 4Br-Bithiophene polymer (GC/4BrBT surface). AFM and TEM images were recorded to investigate the morphology and chemical composition of the Ag(NP). Fe(II)/Fe(III) cyclic voltammetry, Zn underpotential deposition (UPD), XPS, LA-ICP-MS, and Raman techniques were exploited to characterize both the GC/OligoThiophene and GC/OligoThiophene/Ag(NP) interfaces. Theoretical calculation, at the B3LYP/6-311G** level of the theory, enabled rationalization of the electroreduction mechanism and the Raman results.

Glassy carbon (GC) electrode surfaces are functionalized through electrochemical assisted grafting, in oxidation regime, of six amino acids (AA): β-alanine (β-Ala), l -aspartic acid (Asp), 11-aminoundecanoic acid (UA), 4-aminobenzoic acid (PABA), 4-(4-amino-phenyl)-butyric acid (PFB), 3-(4-amino-phenyl)-propionic acid (PFP). Thus, a GC/AA interface is produced featuring carboxylic groups facing the solution. Electrochemical (cyclic voltammetry and electrochemical impedance spectroscopy) and XPS techniques are used to experimentally characterize the grafting process and the surface state. The theoretical results are compared with the experimental evidence to determine, at a molecular level, the overall grafting mechanism. Ionization potentials, standard oxidation potentials, HOMO and electron spin distributions are calculated at the CCD/6-31G* level of the theory. The comparison of experimental and theoretical data suggests that the main electroactive species is the “zwitterionic” form for the three aliphatic amino acids, while the amino acids featuring the amino group bound to the phenyl aromatic moiety show a different behaviour. The comparison between experimental and theoretical results suggests that both the neutral and the zwitterionic forms are present in the acetonitrile solution in the case of 4-(4-amino-phenyl)-butyric acid (PFB) and 3-(4-amino-phenyl)-propionic acid.

We describe the synthesis of alternating bithiophene–fluorene copolymers (P1–P3) with different regiochemistry of the bithienyl unit and different alkylsulfanyl chain lengths. The structural, electrochemical and photophysical properties of these polymers were investigated by gel permeation chromatography (GPC), differential scanning calorimetry (DSC), NMR, UV/Vis and photoluminescence (PL) spectroscopy and cyclic voltammetry (CV), and the polymers were used to assemble organic solar cells (OSCs), in combi-nation with the fullerene derivative methyl [6,6]-phenyl-C61- butyrate (PCBM). P3, with a head-to-head bithienyl unit, shows a broader absorption and a lower band gap with respect to P1 and P2, which have tail-to-tail bithienyl units. The PL intensity of P1–P3 is dramatically quenched in the presence of PCBM, demonstrating that an efficient charge transfer between donor and acceptor occurs. The best OSC device was obtained with P3

Photoelectrochemical (PEC) water splitting is a promising approach for generating hydrogen from water. In order to enhance PEC water splitting efficiency, it is essential to inhibit the production ...

This work demonstrates the chiral-induced spin selectivity effect for inorganic copper oxide films and exploits it to enhance the chemical selectivity in electrocatalytic water splitting. Chiral CuO films are electrodeposited on a polycrystalline Au substrate, and their spin filtering effect on electrons is demonstrated using Mott polarimetry analysis of photoelectrons. CuO is known to act as an electrocatalyst for the oxygen evolution reaction; however, it also generates side products such as H2O2. We show that chiral CuO is selective for O2; H2O2 generation is strongly suppressed on chiral CuO but is present with achiral CuO. The selectivity is rationalized in terms of the electron spin-filtering properties of the chiral CuO and the spin constraints for the generation of triplet oxygen. These findings represent an important step toward the development of all-inorganic chiral materials for electron spin filtering and the creation of efficient, spin-selective (photo)electrocatalysts for water splitting.

Chirality-induced spin selectivity is evidenced by exciting the spin resonance of radicals in an electrochemical cell where the working electrode is covered with a chiral self-assembled monolayer. Because the electron transfer to and from the paramagnetic radical is spin dependent, the electrochemical current changes at resonance. This electrically-detected magnetic resonance (EDMR) is monitored by a lock-in detection based on electrode voltage modulation, at a frequency that optimizes the sensitivity of the differential conductance to the electrode charge transfer process. The method is validated using p-doped GaAs electrodes in which the conduction band electrons are hyperpolarized by a well-known method of optical spin pumping with circularly polarized light. Gold electrodes covered with peptides consisting of 5 alanine groups (Al5) present a relative current change of up to 5 x 10(-5) when the resonance condition is met, corresponding to a spin filtering efficiency between 6 and 19%.

The present research aims to optimize energy efficiency in food processing buildings, by means of integrated design. The work is divided in the following phases: data monitoring, data analyses, computer simulations, and experimental tests in a case-study winery. The goal is to study and design energy saving solutions tailored for farm wineries, and easy to be implemented by the farms. The study proved the effectiveness of the proposed solutions and showed the importance of an integrated design approach to optimize the building and its systems.