Search

With recent advances in the treatment of Spinal Muscular Atrophy (SMA), there is a strong need to increase knowledge on the involvement of organs and systems outside the central nervous system. We investigated bone metabolism, bone mineral density (BMD) and fractures, and their possible correlation with age and motor capacities. Thirty-two children with SMA (27 type 2, 5 type 3), mean age 40 ± 32.3 months, underwent two evaluations at an 18-month interval (V1 and V2). Twelve of these children also underwent a third evaluation at month 36 (V3). Diet, bone metabolism, BMD, X-rays, and motor function (by the Hammersmith Functional Motor Scale Expanded – HFMSE – and the Upper Limb Module – ULM) were assessed. At V1, 25-OH vitamin D3 (25OH D) therapy was started, and dietary calcium intake adjusted according to the recommended dietary allowance. Low 25OH D levels and asymptomatic vertebral fractures were mainly observed at V1. At all visits, bone resorption markers were higher than normal. At V2 and V3, decreased BMD was observed. Higher spine BMD values at follow-up were associated with HFMSE score >12 at baseline (p

Spinal Muscular Atrophy (SMA) is an autosomal recessive neuromuscular disease, leading to progressive denervation atrophy in the involved skeletal muscles. Bone status has been poorly studied. We assessed bone metabolism, bone mineral density (BMD) and fractures in 30 children (age range 15-171 months) affected by SMA types 2 and 3. Eighteen children (60%) had higher than normal levels of CTx (bone resorption marker); 25-OH vitamin D was in the lower range of normal (below 20 ng/ml in 9 children and below 12 ng/ml in 2). Lumbar spine BMAD (bone mineral apparent density) Z-score was below -1.5 in 50% of children. According to clinical records, four children had sustained four peripheral fractures; on spine X-rays, we observed 9 previously undiagnosed vertebral fractures in 7 children. There was a significant inverse regression between PTH and 25-OH D levels, and a significant regression between BMC and BMAD values and the scores of motor-functional tests. Even if this study could not establish the pathogenesis of bone derangements in SMA, its main findings - reduced bone density, low 25OH vitamin D levels, increased bone resorption markers and asymptomatic vertebral fractures also in very young patients - strongly suggest that even young subjects affected by SMA should be considered at risk of osteopenia and even osteoporosis and fractures.

Nanotechnology is a new emerging field that involves the development, manufacturing and measurement of materials and systems in the sub micron down to few nanometers (nm) range. Its development is expected to have a large socio-economical impact in practically all industrial activity fields. However, there is still a lack of information about potential risks of manufactured nanoparticles (mNP) for the environment and with respect to human health. In this work, we studied cytotoxicity, genotoxicity and morphological transformation of cobalt nanoparticles (Co (0)-nano) and cobalt ions (Co+2) in Balb/3T3 cell model. We also evaluated Co-nano dissolution in culture medium and cellular uptake of Co-nano and Co+2. Our results indicate that Co-nano are exerting a cytotoxicity potential (IC50: 20 µM after 2h of exposure and 10 µM at 24 and 72h). For the Co-nano genotoxicity the results show that indeed the Co-nano is genotoxic (>1 µM) but no evident dose-dependent relationship was observed. For the morphological transformation, Co-nano show a statistically significance increase in the formation of Type III foci. Moreover analyzing the internalization of Co-nano we observed a higher uptake if compared with Co+2. Our results indicated cytotoxicity, morphological transformation and genotoxicity induced by Co-nano, while for Co+2 we found cytotoxicity, morphological transformation and genotoxicity, assessed by Comet assay but no by micronucleus test., JRC.I.4-Nanobiosciences

In this work cell adhesion and cellular response to metal compounds classified as cytotoxic and carcinogenic are assessed by electrical impedance measurement in a 96-well plate prototype. This system integrates at the bottom of each well interdigitated electrodes to monitor in real time the electrical impedance changes at the electrode/culture medium interface due to cell adhesion, considered as a index of cell viability. The cytotocixity of sodium arsenite, cadmium chloride and cis-platinum is assessed on-line on BALB/3T3 A-31-1-1 cell line, a well known model to evaluate cytotoxicity and carcinogenic potential of chemicals. The inhibitory half concentration (IC50) is calculated from the impedance data normalized to the control and compared with conventional methods used to study basal cytotoxicity of chemicals in BALB/3T3 cell line model, such as colony forming efficiency (CFE) and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assays. The results suggest similar behavior of cytotoxicity induced by tested chemicals assessed by the three tests compared even if CFE remains the more sensitive. However, the impedance-based on-line measuring 96-well plate method is, on our point of view, the less laborious and easier test. The cytotoxicity of cobalt as micron and nanoparticles is also evaluated revealing the possibility for the system to monitor on-line and with high throughput new chemicals.

In this work we investigated the toxicological effects of nude and chemically functionalised (-NH(2), -OH and -COOH groups) multiwall carbon nanotubes (mwCNTs) using immortalised mouse fibroblasts cell line (Balb/3T3) as in vitro model, alternative to the use of animals, to assess basal cytotoxicity, carcinogenic potential, genotoxicity and cell interaction of nanomaterials (NM). Combining in vitro tests such as cell transformation assay and micronucleus with physicochemical and topological analysis, we obtained results showing no cytotoxicity and genotoxicity. Carcinogenic potential and mwCNTs interaction with cells were instead evident. We stressed the importance that different toxicological end points have to be considered when studying NM, therefore, assays able to detect long-term effects, such as carcinogenicity, must be taken into account together with a panel of tests able to detect more immediate effects like basal cytotoxicity or genotoxicity.

A simple method for the synthesis of lipophilic Ag NPs have been developed. The coated Ag NPs have been entrapped into a FDA-approved and targetable PEG-based polymeric nanoparticles, and this nanocarrier has been conjugated with the peptide chlorotoxin. Uptake experiments have shown a cell-specific recognition of the Ag-1-PNPs-Cltx on U87MG cell lines in comparison to Balb/3T3. The uptake of Ag into the cells was quantified and an interesting cytotoxic effect (IC50= 45 M) has been found on glioblastoma cell lines.

Although amorphous silica nanoparticles (aSiO(2)NPs) are believed to be non-toxic and are currently used in several industrial and biomedical applications including cosmetics, food additives and drug delivery systems, there is still no conclusive information on their cytotoxic, genotoxic and carcinogenic potential. For this reason, this work has investigated the effects of aSiO(2)NPs on Balb/3T3 mouse fibroblasts, focusing on cytotoxicity, cell transformation and genotoxicity. Results obtained using aSiO(2)NPs, with diameters between 15 nm and 300 nm and exposure times up to 72 h, have not shown any cytotoxic effect on Balb/3T3 cells as measured by the MTT test and the Colony Forming Efficiency (CFE) assay. Furthermore, aSiO(2)NPs have induced no morphological transformation in Balb/3T3 cells and have not resulted in genotoxicity, as shown by Cell Transformation Assay (CTA) and Micronucleus (MN) assay, respectively. To understand whether the absence of any toxic effect could result from a lack of internalization of the aSiO(2)NPs by Balb/3T3 cells, we have investigated the uptake and the intracellular distribution following exposure to 85 nm fluorescently-labelled aSiO(2)NPs. Using fluorescence microscopy, it was observed that fluorescent aSiO(2)NPs are internalized and located exclusively in the cytoplasmic region. In conclusion, we have demonstrated that although aSiO(2)NPs are internalized in vitro by Balb/3T3 mouse fibroblasts, they do not trigger any cytotoxic or genotoxic effect and do not induce morphological transformation, suggesting that they might be a useful component in industrial applications.

Different in vitro assays are successfully used to determine the relative cytotoxicity of a broad range of compounds. Nevertheless, different research groups have pointed out the difficulty in using the same tests to assess the toxicity of nanoparticles (NPs). In this study, we evaluated the possible use of a microphysiometer, Bionas 2500 analyzing system Bionas GmbH®, to detect in real time changes in cell metabolisms linked to NPs exposure. We focused our work on response changes of fibroblast cultures linked to exposure by cobalt ferrite NPs and compared the results to conventional in vitro assays. The measurements with the microphysiometer showed a cobalt ferrite cytotoxic effect, confirmed by the Colony Forming Efficiency assay. In conclusion, this work demonstrated that the measurement of metabolic parameters with a microphysiometer is a promising method to assess the toxicity of NPs and offers the advantage to follow on-line the cell metabolic changes.

In this work, we present a complete physicochemical characterization of multi-wall carbon nanotubes (mwCNTs) in order to assess their potential toxicological effects in in vitro cell models using Colony Forming Efficiency (CFE) assay. We verified that Dimethyl Sulfoxide (DMSO) was a more suitable solvent to disperse mwCNTs compared to culture medium guaranteeing reproducibility in the preparation of testing dilutions. The CFE assay was carried out on five mammalian cell lines representing the potentially exposed and/or target organs for nanomaterials (lung, liver, kidney, intestine, skin), as well as on mouse fibroblasts cell line, which usually is considered a sensitive model to verify in vitro cytotoxicity of test compounds. A statistically significant toxic effect was found only in human alveolar basal epithelial cells and immortalized mouse fibroblasts, for which the interaction between mwCNTs and cells was additionally studied by Atomic Force and Scanning Electron Microscopy. In this study, we considered and suggested the CFE assay as a promising test for screening studies of cytotoxicity. In addition, combining in vitro tests with physicochemical analysis, this work underlines basic points to be considered when research on nanomaterials has to be carried out, to set up, in our opinion, well-defined and suitable experimental planning and procedures.

The behaviour of polymeric entrapped thiol-coated GNRs in culture medium under biological conditions was analysed. The in vitro cytotoxicity was studied by a Colony Forming Efficiency assay on immortalized mouse fibroblasts (Balb/3T3) obtaining a dose-effect relationship in which a half inhibitory concentration (IC50) was 20.3µM. The suitability of the new nanomaterial as an optoacoustic contrast agent was investigated in phantom studies using a hardware platform suitable for retrieving clinically relevant data. Spherical alginate phantoms containing GNR-2-PNPs at different concentrations were synthesized and the optoacoustic signal amplitudes were measured as a function of concentration. Signals could be obtained with satisfying signal-to-noise ratio (SNR) down to concentrations of 11 µM corresponding to subtoxic concentration in our in vitro model. The nanomaterial proved to be a suitable and promising contrast agent for different optoacoustic imaging modalities including multispectral approaches.

Atomic force microscopy (AFM) indentation has become an important technique for quantifying the mechanical properties of live cells at nanoscale. However, determination of cell elasticity modulus from the force- displacement curves measured in the AFM indentations is not a trivial task. The present work shows that these force- displacement curves are affected by indenter-cell adhesion force, while the use of an appropriate indentation model may provide information on the cell elasticity and the work of adhesion of the cell membrane to the surface of the AFM probes. A recently proposed indentation model (Sirghi, Rossi in Appl Phys Lett 89:243118, 2006), which accounts for the effect of the adhesion force in nanoscale indentation, is applied to the AFM indentation experiments performed on live cells with pyramidal indenters. The model considers that the indentation force equilibrates the elastic force of the cell cytoskeleton and the adhesion force of the cell membrane. It is assumed that the indenter-cell contact area and the adhesion force decrease continuously during the unloading part of the indentation (peeling model). Force-displacement curves measured in indentation experiments performed with silicon nitride AFM probes with pyramidal tips on live cells (mouse fibroblast Balb/c3T3 clone A31-1-1) in physiological medium at 37°C agree well with the theoretical prediction and are used to determine the cell elasticity modulus and indentercell work of adhesion., JRC.I.4-Nanobiosciences