Search

In this paper, we report on the measurement of the optical properties (absorption and scattering coefficients) of photoluminescent turbid media using a homemade integrating sphere setup equipped with a tunable monochromatic light source. The hemispherical reflectance and transmission data are analyzed with the radiative transfer equation using a Monte Carlo simulation-based lookup table to obtain the optical properties of the sample. The results are compared with the optical properties received from a classical integrating sphere setup equipped with a broadband white light source. The additional light of the photoluminescence generates artifacts within the optical properties, which are not present using a monochromatic light source. Additionally, a batch of samples with a broad range of scattering coefficients and dye concentrations were prepared and characterized with the aforementioned setup. The findings can help to generate a digital twin with the optical properties of the sample, which improves the physically based rendering and the design of, e.g., white-light LEDs. Dental restoration and photodynamic therapy also benefit from determination of the optical properties of photoluminescent turbid media. [ABSTRACT FROM AUTHOR]

Broadband spectral measurements of the ballistic transmission of scattering samples are challenging. The presented work shows an approach that includes a broadband system and an automated adjustment unit for compensation of angular distortions caused by non-plane-parallel samples. The limits of the system in terms of optimal transmission and detected forward scattering influenced by the scattering phase function are investigated. We built and validated a setup that measures the collimated transmission signal in a spectral range from 300 nm to 2150 nm. The system was validated using polystyrene spheres and Mie calculations. The limits of the system in terms of optimal transmission and detected forward scattering were researched. The optimal working parameters of the system, analyzed by simulations using the Monte Carlo method, show that the transmission should be larger than 10% and less than 90% to allow for a reliable measurement with acceptable errors caused by noise and systematic errors of the system. The optimal transmission range is between 25% and 50%. We show that the phase function is important when considering the accuracy of the measurement. For strongly forward-scattering samples, errors of up to 80% can be observed, even for a very small numerical aperture of 6.6 · 10 − 4 , as used in our experimental system. We also show that errors increase with optical thickness as the ballistic transmission decreases and the multiscattered fraction increases. In addition, errors caused by multiple reflections in the sample layer were analyzed and also classified as relevant for classical absorption spectroscopy. [ABSTRACT FROM AUTHOR]

We present a goniometer designed for capturing spectral and angular-resolved data from scattering and absorbing media. The experimental apparatus is complemented by a comprehensive Monte Carlo simulation, meticulously replicating the radiative transport processes within the instrument's optical components and simulating scattering and absorption across arbitrary volumes. Consequently, we were able to construct a precise digital replica, or "twin", of the experimental setup. This digital counterpart enabled us to tackle the inverse problem of deducing optical parameters such as absorption and scattering coefficients, along with the scattering anisotropy factor from measurements. We achieved this by fitting Monte Carlo simulations to our goniometric measurements using a Levenberg–Marquardt algorithm. Validation of our approach was performed using polystyrene particles, characterized by Mie scattering, supplemented by a theoretical analysis of algorithmic convergence. Ultimately, we demonstrate strong agreement between optical parameters derived using our novel methodology and those obtained via established measurement protocols. [ABSTRACT FROM AUTHOR]

Dairy products play an important role in our daily nutrition. As a turbid scattering medium with different kinds of particles and droplets, each alteration of these components changes the scattering properties of milk. The goal of this work is the determination of the amount of main scattering components, the fat droplets and the casein micelles, by understanding the light propagation in homogenized milk and in raw milk. To provide the absolute impact of these milk components, the geometrical and optical properties such as the size distribution and the refractive index (RI) of the components have to be examined. We determined the reduced scattering coefficient µ's and the absorption coefficient µa from integrating sphere measurements. By use of a collimated transmission setup, the scattering coefficient µs was measured. Size measurements were performed to validate the influence of the fat droplet size on the results of the scattering properties; also, the RI of both components was determined by the said coefficients. These results were used to determine the absolute impact of the milk components on the scattering behavior. By fitting Mie theory calculations on scattering spectra µs and µ's from different raw milk samples, it was possible to get reliable values for the concentrations of fat and casein and for the size of the fat droplets. By destroying the casein micelles, it was possible to separate the influence of the different scattering components on scattering behavior. [ABSTRACT FROM AUTHOR]