Search

PURPOSE: The aim of this long-term follow-up study was to collect up to 17 years of survival data of endodontically treated single teeth with or without a prefabricated metal post. MATERIALS AND METHODS: Single teeth were provided with direct composite resin core-crown reconstructions with or without posts by 15 operators. Restorations consisted of either a prefabricated metal post and a composite core-crown reconstruction or a post-free direct composite reconstruction. Allocation of either restoration was performed by balanced drawing. These restorations were not covered by an artificial crown. The study sample consisted of 87 patients who received 98 core-crown reconstructions. The performance of the restorations was evaluated based on data collected from the files of the clinicians currently monitoring the oral health of the patients. The survival probability was analyzed at different levels: on the restoration level and on the level of the tooth carrying the restoration. Kaplan-Meier analysis was used to compare survival probabilities. RESULTS: Post placement showed no influence on the survival probability at either level (P > .05). The estimated overall survival rate at 17 years was 53% +/- 14% at the restoration level and 79% +/- 11% at the tooth level. CONCLUSION: The results of this long-term follow-up study showed no difference in survival probabilities between different direct composite resin core-crown reconstructions of endodontically treated single teeth (with or without a post). [ABSTRACT FROM AUTHOR]

Objective: Literature was systematically reviewed to determine the impact of tooth wear management on the Oral Health Related Quality of Life (OHRQoL) amongst adult patients with tooth wear., Data: A protocol was developed, a priori (PROSPERO CRD42022343108) following the PRISMA guidelines. To assess risk of bias and certainty of evidence the RoB2-tool, JBI-tool, and GRADE were used., Sources: PubMed, Scopus, Cochrane Library, Embase and Web of Science were searched. The first search took place on 21.10.2022, subsequently updated in May 2024., Study Selection: Inclusion criteria were RCT's, quasi-RCT's, prospective- or retrospective-studies with adult patients with moderate to severe tooth wear, treated restoratively and/or with counseling and monitoring that were also assessed for OHRQoL during at least two time points. Exclusion criteria were, studies with children, OHRQoL only measured once, narrative and systematic reviews, conference abstracts, technical reports, consensus papers, and any other type of non-clinical study., Results: Six papers were included in this review. Overall, qualitative analysis revealed an increase in OHRQoL after restorative treatment, and no change in OHRQoL after one year of counseling and monitoring. Some studies showed a slightly negative effect on esthetics in the years post-treatment, and some of the dimensions of the Oral Health Impact Profile (OHIP) did not change or demonstrated minor change only. For the RCT's, blinding of participants and operators was not possible, as the participants had an awareness of the treatment. For the non-RCT's, the primary issue was the lack of control, with a general high risk of bias., Conclusion: The provision of restorative treatment in patients with moderate to severe tooth wear frequently results in a positive impact on OHRQoL. Further research is required to substantiate the importance of OHRQoL for the treatment of (tooth wear) patients., Clinical Significance: The outcomes may help dentists and researchers better understand the advantages of using PROMS in their clinical work or research as valuable outcomes., Competing Interests: Declaration of competing interest The authors declare that they have no conflict of interest., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

The purpose of root canal posts is to obtain additional retention for build-up restorations of endodontically treated teeth so they can be functionally reconstructed. Due to developments in adhesive dentistry and a lack of clinical evidence, root canal posts are used less and less. Currently, the advice of the European Society of Endodontology is to use a root canal post only in front teeth and premolars in the absence of remaining coronal dentine walls. It is important to avoid additional preparation when placing a root canal post, because this causes (additional) weakness of the tooth. The loss of dental tissue due to preparation cannot be compensated for by placing a post.

Objective: To compare the biomechanical properties of different endocrown designs on endodontically treated teeth with an extensive defect in the mesial wall using a three-dimensional finite element method (3D FEM)., Methods: Four finite element analysis models were designed and built up based on different endocrown configurations in a mandibular molar. One model was designed as a butt joint preparation with 2 mm occlusal thickness(control), the other three models were butt joint designs with different distances between the bottom of the mesial wall preparation and the cemento-enamel junction (CEJ): 2 mm, 1 mm and 0 mm respectively. A vertical load parallel with the longitudinal axis of the tooth and an oblique load with a 45°angle to the longitudinal axis were applied to the occlusal surfaces. The maximum Von Misses (VM) stresses and stress distribution patterns were calculated and compared. Weibull risk-of-rupture analysis was used to analyze the survival probability of the restorations and tooth in the different models., Results: For the restoration, the model with a mesial wall destruction at the level of CEJ showed much higher risk of failure than other models. Overall, none of the four models showed failure. Under oblique loading, VM stress in the cement layer of the models with a mesial wall defect was higher than in the control model. In the dentin, the highest VM stresses were found in the peri-cervical dentin. Under the oblique loading, the model with the mesial wall destruction at the level of CEJ restored by endocrown showed the highest risk of failure., Conclusion: Under the oblique loading, with the increase of the simulated defect in the mesial wall, the peak VM stress values in the cement layer increased accordingly. In the model with a mesial wall defect up to the level of CEJ risk of failure was highest in the cervical dentin., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Purpose: The aim of this prospective study was to evaluate the clinical performance of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in patients with severe tooth wear, the effect of the restorative treatment on the oral health-related quality of life (OHRQoL), and the etiology of tooth wear as a risk factor for restoration failure., Materials and Methods: Patients with generalized severe tooth wear were included. Restorations (LAVA Ultimate, 3M Oral Care) were cemented (RelyX Ultimate, 3M Oral Care) on all teeth and were evaluated after 1 month and 1 year. OHRQoL was assessed via questionnaires at baseline and after 1 year. Differences were evaluated (paired t-test). Two mechanical tooth-wear lesions resulting from tooth-tooth contact, and 3 chemical tooth wear lesions resulting from intrinsic or extrinsic acids dissolving natural hard tooth substance, were evaluated to assess the etiology of tooth wear in association with restoration failure using multilevel logistic regression analyses (p < 0.05)., Results: Twenty-one patients (age: 41.7 ± 10.4 years) were evaluated after 1 year (13.5 ± 1.2 months). 568 indirect CAD/CAM restorations were placed. None were replaced or lost. Twelve were repaired and 10 were refurbished. Success rates were 100% to 97.2%. Questionnaires showed a significant positive impact of the treatment on OHRQoL (p < 0.001). The presence of mechanical lesions did not pose a higher risk for restoration failure (p = 0.78). The presence of chemical lesions showed a lower risk of restoration failure (p = 0.002)., Conclusion: The use of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in the restorative treatment of severely worn dentitions showed satisfactory results in the short term.

Introduction: Changes in society, new public demands for dental care and contemporary educational insights have influenced dental education worldwide and demand a renewed perspective. Following this perspective, an innovative interprofessional dental Master curriculum was developed at Radboud University Nijmegen in the Netherlands., Educational Principles: The curriculum is based on five contemporary educational principles and the core of the curriculum consists of a Student Run Dental Clinic that is fully run by students under professional supervision., The New Curriculum: In the Student Run Dental Clinic, Master dental students and Bachelor oral hygiene students are responsible for the care of approximately 750 patients. The students work within the same clinic for 3 years and patients receive oral health care from the same students over a long period. The clinic is a longitudinal cross-disciplinary clinic with different dental subdisciplines. Entrustable professional activities (also known as EPAs), to our knowledge not yet widely used in dental education, were introduced to facilitate learning and assessment. Fourteen EPAs have been developed to stimulate interprofessional education and learning. Of these, five EPAs are identical for the dental and oral hygiene curriculum, leading to extended interprofessional education and learning in the Student Run Dental Clinic., Discussion: Preliminary results show that EPAs are generally well received by supervisors and students., Conclusion: To monitor and investigate the exact effect of the interventions and underlying mechanisms, a research programme on interprofessional learning, practice-based learning and EPAs and entrustment in dental education was recently set up., (© 2021 The Authors. European Journal of Dental Education published by John Wiley & Sons Ltd.)

Purpose: The aim of this study was to analyze the clinical fit of metal-frame partial removable dental prostheses (PRDPs) based on custom trays used with alginate or polyvinyl siloxane impression material., Materials and Methods: Fifth-year students of the Nijmegen Dental School made 25 correct impressions for 23 PRDPs for 21 patients using alginate, and 31 correct impressions for 30 PRDPs for 28 patients using polyvinyl siloxane. Clinical fit of the framework as a whole and of each retainer separately were evaluated by calibrated supervisors during framework try-in before (first evaluation) and after (second evaluation) possible adjustments (score 0 = poor fit, up to score 3 = good fit). Framework fit and fit of the denture base were evaluated at delivery (third evaluation). Finally, postinsertion sessions were evaluated and total number of sessions needed, sore spots, adjustments to the denture base, and reported food-impaction were recorded., Results: No significant differences in clinical fit (of the framework as a whole, for the retainers, or for the denture base) were found between the groups in the three evaluation sessions. Differences were not found for postinsertion sessions with one exception: in the alginate group, four subjects reported food impaction, versus none in the polyvinyl siloxane group., Conclusion: Clinical fit of metal-frame PRDPs based on impressions with custom trays combined with alginate or polyvinyl siloxane was similar.

This pilot study analyzed impression procedures for conventional metal frame removable partial dentures (RPDs). Heads of RPD departments of three dental laboratories were asked to record features of all incoming impressions for RPDs during a 2-month period. Records included: (1) impression procedure, tray type (stock/custom), impression material (elastomer/alginate), use of border-molding material (yes/no); and (2) RPD type requested (distal-extension/tooth-bounded/combination). Of the 132 total RPD impressions, 111 (84%) involved custom trays, of which 73 (55%) were combined with an elastomer. Impression border-molding material was used in 4% of the cases. Associations between impression procedure and RPD type or dentists' year/university of graduation were not found.

After (extensive) loss of tooth tissue, vital teeth can be built up completely with composite restoration material. Sometimes, the application of additional retentive preparations is indicated. In exceptional cases, a root canal treatment is indicated, following which a root canal post is applied if necessary. Endodontically treated multi-rooted teeth can be built up entirely with composite, utilizing the pulp chamber and root canal accesses for retention. However, in single-rooted teeth a root canal post is necessary, in which case a prefabricated root post is used. Traditionally, metal posts were used in combination with a cast, indirect build-up restoration. Subsequently, directly fabricated cores, combining metal posts with amalgam or, at the present time, composite restoration material, became customary. The present trend is to use prefabricated or individually fabricated fibre-reinforced posts. After restoring a tooth with a build-up restoration, a combined build-up restoration can be chosen, or a direct or indirect crown single tooth prosthesis.

Objectives: Fractured coronal fragments of incisors can be adhered to the remaining tooth with resin composite, but are prone to failure. This study explores whether mini fibre-reinforced composite (FRC) anchors increase fracture resistance of reattached fragments., Methods: Forty-five extracted incisors were randomly divided into three groups. In Groups A and B coronal fragments were reattached to the remaining tooth, with additionally two anchors placed in Group B. In Group C resin composite buildups were made. Specimens were statically loaded until failure occurred. Failure modes were characterized as intact remaining tooth substrate (adhesive or cohesive failure of coronal fragment) or fractured remaining tooth substrate (fracture limited to enamel or extending into dentin)., Results: Mean fracture loads were 255N (SD=108N) for Group A, 599N (SD=465N) for Group B and 786N (SD=197N) for Group C (values significantly different, all p values <0.05). Group A showed purely adhesive failures, while Groups B and C showed 73 and 53% fractures of remaining tooth substrate (p<0.05)., Conclusions: Mini FRC anchors increase fracture resistance of reattached coronal fragments, but induce more remaining tooth substrate fractures.

Objective: The aim of this long-term follow-up was to collect up to 17-year survival data of different metal post-and-core restorations with a covering crown., Methods: At initiation of the study, a controlled clinical trial, single tooth was provided with an artificial covering crown, by 18 operators. Restorations under investigation were the post-and-core restorations: cast post-and-core restorations, prefabricated metal post and resin composite core restorations, and post-free all-composite core restorations. Before treatment allocation, the recipient tooth was categorized according to the expected dentin height after tooth preparation. A tooth was assessed to have "substantial dentin height" (Trial 1) or "minimal dentin height" (Trial 2). The study sample consisted of 257 patients that received 307 core restorations. The performance of the restorations was based on data collected from the files of the current dentists monitoring the oral health of the patients. The survival probability was analyzed at different levels: on the restoration level (S(R)), and on the level of the tooth carrying the restoration (S(T)). Kaplan Meier analyses were used to compare survival probabilities., Results: "Type of post-and-core restoration" showed no influence on the survival probability (at both levels) in both trials (P-value>0.05). The 17-year survival rates at restoration level varied from 71% to 80%, and at tooth level from 83% to 92%., Conclusions: The results of this study showed no difference in survival probabilities among different core restorations under a covering crown of endodontically treated teeth. The preservation of substantial remaining coronal tooth structure seems to be critical to the long-term survival of endodontically treated crowned teeth.

Purpose: To study the fracture behavior of direct resin composite crowns with or without experimental fiber reinforcement., Methods: Clinical crowns of single-rooted maxillary premolars were cut off at the cemento-enamel junction. Canals were prepared with Gates Glidden drills up to size 4. No additional post-space preparations were made. Roots were embedded in acrylic and canal entrances were standardized (depth 2 mm, diameter 1.75 mm). Three groups of 14 samples were treated as follows: (1) custom-made glass FRC post (EverStick Post); fibers 5 mm deep in the canal, (2) similar post-system as (1) with incorporation of a new type of glass fiber fabric, (3) no fiber reinforcement (control). Posts were cemented with resin cement (Panavia F). Resin composite crowns (Filtek Z250) were made using an anatomically formed mold. Static load until fracture was applied using a universal loading device with a cylindrical bar (diameter 2 mm) with a crosshead speed of 5 mm/minute (loading angle: 30 degrees to the tooth long-axis). Failure modes were categorized as favorable and unfavorable failures., Results: There was no significant difference in mean failure loads among the four groups (P > 0.05). Favorable failures occurred significantly more often in Group 2 than in the other groups (P < 0.05). The results suggest that an incorporated glass fiber fabric does not affect the load-bearing capacity of resin composite complete crowns on structurally compromised and non-vital premolars. Incorporation of a glass fiber fabric, however, has a beneficial effect on the failure mode.

The failure load and failure mode of severely damaged endodontically treated maxillary premolars were examined within a laboratory study. The premolars were divided into 4 groups. The first of which was restored with prefab metal posts, the second with prefab fibre posts and the third with custom-made fibre posts; all 3 receiving direct resin crowns. In a 4th (control) group no post-space preparation was performed and no posts were placed; a direct resin composite complete crown was made. After thermocycling, all specimens were statically loaded in a universal test machine until failure, under an angle of 30 degrees. There was no significant difference between the mean failure loads. Failure was merely due to unfavourable, non-repairable fractures (ending below the simulation of bone level). This study suggests that posts are not necessarily required to increase the failure load of direct resin composite crowns, however, clinical studies are necessary to confirm these findings.

The in vitro fracture behavior of severely damaged premolars, restored with metal crowns with limited ferrule and several post-and-core systems, was investigated. Crowns of maxillary premolars were removed and canals were prepared with Gates Glidden drills and with Parapost drills. Groups of 11 samples were each treated with cast post-and-cores (Parapost XP, Wironium Plus) (group 1), prefabricated metal posts (Parapost XH) (group 2), prefabricated glass fiber posts (Parapost FiberWhite) (group 3), and custom-made glass fiber posts (EverStick Post) (group 4). Posts and composite cores and metal crowns in groups 2, 3, and 4 were adhesively cemented. Post-and-cores and crowns in group 1 were cemented with phosphate cement. Thermocycling was performed (6,000x, 5-55 degrees C). Two static load tests (30 degrees ) were applied. During the first load test (preloading) no failures occurred. Failure modes from the second load test were categorized into favorable and unfavorable failures. Mean failure loads among the four groups (group 1, 1,845 N; group 2, 1,718 N; group 3, 1,812 N; and group 4, 1,514 N) were not significantly different. Unfavorable failures were root fractures and favorable failures were postcrown displacements. No differences in frequencies of unfavorable/favorable failures were seen among the groups. The results suggest that different post-and-core systems have no influence on the fracture behavior of severely damaged premolars restored with metal crowns with limited ferrule.

Aim: To investigate ex vivo the fracture resistance and failure mode of direct resin composite complete crowns with and without various root canal posts made on maxillary premolars., Methodology: The clinical crowns of 40 human extracted single-rooted maxillary premolars were sectioned at the cemento-enamel junction. The canals were prepared with Gates Glidden drills up to size 4. Thirty samples were provided with standardized post spaces in the palatal canal and all roots were embedded in acrylic. Minimal standardized preparations in the canal entrances were made. Groups of 10 samples were treated with (i) prefabricated metal posts, (ii) prefabricated glass fibre posts, (iii) custom-made glass fibre posts, and (iv) no posts (control). Posts were cemented with resin cement and resin composite complete crowns were made. All specimens were thermocycled (6000x, 5-55 degrees C). Static load until fracture was applied using a universal loading device (crosshead speed 5 mm min(-1)) at a loading angle of 30 degrees . Failure modes were categorized as favourable and unfavourable failures., Results: No significant difference was observed between the mean failure loads (group 1: 1386 N, group 2: 1276 N, group 3: 1281 N, and group 4: 1717 N, P > 0.05), nor between frequencies of failure modes (P > 0.05). All failures were fractures of the resin composite crown in combination with tooth material (cohesive failures)., Conclusions: Within the limits of this laboratory investigation it is concluded that severely damaged and root filled maxillary premolars, restored with direct resin composite complete crowns without posts have similar fracture resistances and failure modes compared to those with various posts, which suggest that posts are not necessarily required.

Purpose: This study tested whether: (1) the survival rate of cast post-and-core restorations is better than the survival of direct post-and-core restorations and post-free all-composite cores; and (2)the survival of these buildup restorations is influenced by the remaining dentin height after preparation., Materials and Methods: In a clinical trial, 18 operators made 319 core restorations in 249 patients. The restorations involved were: (1) cast post-and-core restorations; (2) direct post and composite core restorations; and (3) post-free all-composite cores. All restorations were made under single porcelain-fused-to-metal crowns. Treatments were allocated after dentin height assessment using balanced drawing. Failures were registered during a 5-year period., Results: Fifteen restorations failed during the follow-up period. Five failures occurred during the first month; they were considered to be independent from clinical aging and excluded from further survival assessments. The overall survival was 96%+/-2%. No difference was found between the survivals of the different types of restorations. The factor "remaining dentin height" appeared to have a significant effect on the survival of post-and-core restorations (98%+/-2% survival for "substantial dentin height" vs 93%+/-3% for "minimal dentin height")., Conclusion: The type of post and core was not relevant with respect to survival. The amount of remaining dentin height after preparation influenced the longevity of a post-and-core restoration.

Purpose: This study sought to aggregate literature data on in vitro failure loads and failure modes of prefabricated fiber-reinforced composite (FRC) post systems and to compare them to those of prefabricated metal, custom-cast, and ceramic post systems., Materials and Methods: The literature was searched using MEDLINE from 1984 to 2003 for dental articles in English. Keywords used were (post or core or buildup or dowel) and (teeth or tooth). Additional inclusion/exclusion steps were conducted, each step by two independent readers: (1) Abstracts describing post-and-core techniques to reconstruct endodontically treated teeth and their mechanical and physical characteristics were included (descriptive studies or reviews were excluded); (2) articles that included FRC post systems were selected; (3) in vitro studies, single-rooted human teeth, prefabricated FRC posts, and composite as the core material were the selection criteria; and (4) failure loads and modes were extracted from the selected papers, and failure modes were dichotomized (distinction was made between "favorable failures," defined as reparable failures, and "unfavorable failures,"defined as irreparable [root] fractures)., Results: The literature search revealed 1,984 abstracts. Included were 244, 42, and 12 articles in the first, second, and third selection steps, respectively. Custom-cast post systems showed higher failure loads than prefabricated FRC post systems, whereas ceramic showed lower failure loads. Significantly more favorable failures occurred with prefabricated FRC post systems than with prefabricated and custom-cast metal post systems., Conclusion: The variable "post system" had a significant effect on mean failure loads. FRC post systems more frequently showed favorable failure modes than did metal post systems.

The rebuilding of endodontic treated teeth is a common situation in general dental practice. The final (post-) core buildup, with or without a crown, should protect the restoration as well as the tooth against fracture, should prevent debonding of the restoration, should not permit leakage and should provide an acceptable esthetic result. Several factors influencing these properties are described. The (post-) core buildup in relation to the concept of minimally invasive dentistry is discussed. In conclusion, there is no unambiguous guideline for restoring endodontically treated teeth. Standardised in vitro and in vivo studies are needed.

This article describes the development of a three-dimensional finite element model of a premolar, based on a micro-scale computed tomographic data-acquisition technique. Using the model shrinkage stresses were analysed during and after the polymerisation process of resin composite. The stress patterns generated were three-dimensional. The results of this study indicate that failure of the interface is more probable than failure of the composite material. The described procedure is a relatively easy method to produce a highly detailed 3-D finite element model of a premolar with an adhesive cups-replacing restoration.