Search

The purpose of this study was to analyze the palmar plate complex at the proximal interphalangeal joint using a three-dimensional (3D) technique, which makes it easier to understand the dimensions of structures and their relationship to the adjacent components. This method allows individual elements to be removed virtually, facilitating clearer observation of each component. Sixteen cadaveric specimens were dissected and reconstructed in a 3D virtual environment. The palmar plate is made up of a distal, fibrous portion and a proximal, membranous portion, which anchors distally on the base of the middle phalanx and is continuous with the bilateral check-rein ligaments proximally. The accessory collateral ligaments and the A3 pulley suspend the palmar plate laterally. [ABSTRACT FROM PUBLISHER]

We present a case of a right sided accessory head of the pectoralis major muscle located inferior to its abdominal head. This variation was found during a routine anatomy dissection at the American University of the Caribbean School of Medicine. The muscle fibres of the accessory head of the pectoralis major muscle arose from those of the serratus anterior muscle and travelled superolaterally towards the axilla. The accessory muscle terminated by fusing with the tendinous fibres of the pectoralis major muscle as they underwent their normal anatomical rotation before insertion upon the lateral lip of the bicipital groove of the humerus. Although variations in the pectoral muscles are not uncommon, this case appears to be unique in the literature. The possible clinical implications are discussed. [ABSTRACT FROM AUTHOR]

Background: Tiny arteriovenous (AV) shunts of 10-150 µm (0.01-0.15 mm) are documented in the hands and feet. Larger shunts up to 0.5 mm (500 µm) have been discovered by the authors in the inner canthus and the human eye. This study seeks their possible existence in the upper limb., Methods: Radiographic lead oxide cadaver injection and dissection studies of 14 archival and six new upper limbs were examined., Results: AV shunts of 0.1-0.5 mm were discovered between the brachial, ulnar, and radial arteries and their venae comitantes and between their arterial perforators and the subcutaneous veins., Conclusion: This pilot study provides insight into the possible function of these large AV shunts associated with blood flow variation in temperature, blood pressure, tissue transfer, flap prefabrication, and flap necrosis., Competing Interests: The authors have no financial interest to declare in relation to the content of this article., (Copyright © 2024 The Authors. Published by Wolters Kluwer Health, Inc. on behalf of The American Society of Plastic Surgeons.)

Background: The trapeziometacarpal joint (TMCJ) is the most common hand joint affected by osteoarthritis (OA), and trapezium implant arthroplasty is a potential treatment for recalcitrant OA. This meta-analysis aimed to investigate the efficacy and safety of various trapezium implants as an interventional option for TMCJ OA. Methods: Web of Science, PubMed, Scopus, Google Scholar, and Cochrane library databases were searched for relevant studies up to May 28, 2022. Preferred Reported Items for Systematic Review and Meta-Analysis guidelines were adhered to, and the protocol was registered in PROSPERO. The methodological quality was assessed by National Heart, Lung, and Blood Institute tools for observational studies and the Cochrane risk of bias tool. Subgroup analyses were performed on different replacement implants; the analysis was done using Open Meta-Analyst software and P values <.05 were considered statistically significant. Results: A total of 123 studies comprising 5752 patients were included. Total joint replacement (TJR) implants demonstrate greater significant improvements in visual analogue scale pain scores postoperatively. Interposition with partial trapezial resection implants were associated with highest grip strength and highest reduction in the Disabilities of the Arm, Shoulder, and Hand (DASH) score. Revision rates were highest in TJR (12.3%) and lowest in interposition with partial trapezial resection (6.2%). Conclusion: Total joint replacement and interposition with partial trapezial resection implants improve pain score, grip strength, and DASH scores more than other implant options. Future studies should focus on high-quality randomized clinical trials comparing different implants to accumulate higher quality evidence and more reliable conclusions.

Three-dimensional (3D) printing, or additive manufacturing, is now a widely used tool in pre-operative planning, surgical teaching and simulator training. However, 3D printing technology that produces models with accurate haptic feedback, biomechanics and visuals for the training surgeon is not currently available. Challenges and opportunities in creating such surgical models will be discussed in this review paper. Surgery requires proper tissue handling as well as knowledge of relevant anatomy. To prepare doctors properly, training models need to take into account the biomechanical properties of the anatomical structures that will be manipulated in any given operation. This review summarises and evaluates the current biomechanical literature as it relates to human tissues and correlates the impact of this knowledge on developing high fidelity 3D printed surgical training models. We conclude that, currently, a printer technology has not yet been developed which can replicate many of the critical qualities of human tissue. Advances in 3D printing technology will be required to allow the printing of multi-material products to achieve the mechanical properties required., (© 2019 Anatomical Society.)

Background: Incorrect femoral tunnel placement is the most common cause of graft failure during Anterior Cruciate Ligament (ACL) Reconstruction. A reliable landmark can minimize errors., Aim: To identify whether the Lateral Intercondylar Ridge (LIR) is a consistent anatomical structure and define its relationship with the femoral ACL insertion., Materials and Methods: Phase 1: we studied 23 femoral dry bone specimens macroscopically. Using a digital microscribe, the medial surface of the lateral femoral condyle was reconstructed (3D) to evaluate whether there was an identifiable bony ridge. Phase 2: 7 cadaveric specimens with intact soft tissues were dissected to identify the femoral ACL insertion. A 3D reconstruction of the femoral ACL insertion and the surface allowed us to define the relationship between the LIR and the ACL insertion., Results: All specimens had a defined LIR on the medial surface of the lateral femoral condyle. The ridge was consistently located just anterior to the femoral ACL insertion. The ACL footprint was present in the depression between the ridge and the Inferior Articular Cartilage Margin (IACM). The mean distance from the midpoint of the IACM to the LIR was 10.1 mm., Conclusions: This is the first study to use the microscribe to digitally reconstruct the medial surface of the lateral femoral condyle. It shows that the LIR is a consistent anatomical structure that defines the anterior margin of the femoral ACL insertion, which guides femoral tunnel placement. Our findings support the ruler technique, which is a commonly used method for anatomic single bundle ACL reconstruction., (Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.)

Background: The anatomy of the first metatarsophalangeal (MTP) joint, particularly the metatarsosesamoid articulation, remains poorly understood. Our goal was to quantitatively define the excursion of the sesamoids., Methods: Seven cadavers were dissected to assess the articulating surfaces throughout a normal range of motion. The dissections were digitally reconstructed in various positions using a MicroScribe., Result: For first MTP joint, excursion averaged 14.7mm for the tibial sesamoid in the sagittal plane and 7.5mm for the fibular sesamoid. The sesamoids also moved medially to laterally when the joint was dorsiflexed. For the maximally dorsiflexed joint, excursion averaged 2.8mm for the tibial sesamoid and 3.5mm for the fibular sesamoid., Conclusion: Hallucal sesamoids appear to have differential tracking: the tibial sesamoid has greater longitudinal excursion; the fibular sesamoid has greater lateral excursion. The anatomical data will interest those involved with the design of an effective hallux arthroplasty., (Copyright © 2014 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.)

The purpose of this study was to analyze the palmar plate complex at the proximal interphalangeal joint using a three-dimensional (3D) technique, which makes it easier to understand the dimensions of structures and their relationship to the adjacent components. This method allows individual elements to be removed virtually, facilitating clearer observation of each component. Sixteen cadaveric specimens were dissected and reconstructed in a 3D virtual environment. The palmar plate is made up of a distal, fibrous portion and a proximal, membranous portion, which anchors distally on the base of the middle phalanx and is continuous with the bilateral check-rein ligaments proximally. The accessory collateral ligaments and the A3 pulley suspend the palmar plate laterally.

The masseter muscle is one of the major chewing muscles and contributes to define facial contour. It is an important landmark for aesthetic and functional surgery and has been used for facial palsy reanimation or as source of donor motor nerve. We present an anatomic study to evaluate the possibility of using a muscle subunit for dynamic eye reanimation. Sixteen head halves were dissected under magnification to study the neurovascular distribution and determine safe muscle subunits; areas of safe/dangerous dissection were investigated. Once isolated, the arc of rotation of the muscular subunit was measured on fresh body to verify the reach to the lateral canthus. The patterns of neurovascular distribution and areas of safe dissection were identified; the anterior third of the muscle represents an ideal subunit with constant nerve and artery distribution. The muscle is too short to reach the lateral canthus; a fascia graft extension is needed. The information provided identified the main neurovascular branches and confirms the feasibility of a dynamic segmental flap. The need of efficient motor units for facial reanimation demands for different surgical options. A detailed anatomic description of the neurovascular bundle is mandatory to safely raise a functional motor subunit.

Objectives: We performed in vitro validation of a non-invasive skin-mounted system that could allow quantification of anteroposterior (AP) laxity in the outpatient setting., Methods: A total of 12 cadaveric lower limbs were tested with a commercial image-free navigation system using trackers secured by bone screws. We then tested a non-invasive fabric-strap system. The lower limb was secured at 10° intervals from 0° to 60° of knee flexion and 100 N of force was applied perpendicular to the tibia. Acceptable coefficient of repeatability (CR) and limits of agreement (LOA) of 3 mm were set based on diagnostic criteria for anterior cruciate ligament (ACL) insufficiency., Results: Reliability and precision within the individual invasive and non-invasive systems was acceptable throughout the range of flexion tested (intra-class correlation coefficient 0.88, CR 1.6 mm). Agreement between the two systems was acceptable measuring AP laxity between full extension and 40° knee flexion (LOA 2.9 mm). Beyond 40° of flexion, agreement between the systems was unacceptable (LOA > 3 mm)., Conclusions: These results indicate that from full knee extension to 40° flexion, non-invasive navigation-based quantification of AP tibial translation is as accurate as the standard validated commercial system, particularly in the clinically and functionally important range of 20° to 30° knee flexion. This could be useful in diagnosis and post-operative evaluation of ACL pathology. Cite this article: Bone Joint Res 2013;2:233-7.

We report the unusual complication of non-union 14 years following a capitate fracture in a right-hand dominant man. Our patient fell and sustained an injury to his left wrist 14 years ago. At that time he had a swollen painful left wrist. His symptoms subsequently settled and he went back to his normal activities. He lost some power for bench-pressing and had slightly restricted range of motion but remained essentially pain-free. He presented 14 years later with another wrist injury when the original non-union was revealed.

Congenital pseudarthrosis of the clavicle is a rare condition present at birth but often diagnosed later in childhood. Indications for surgical treatment include pain, deformity or neurovascular compromise. Reconstruction usually involves resection of the pseudarthrosis, placement of iliac crest bone graft or graft substitute and internal fixation. In this paper, we present a case of congenital pseudarthrosis of the clavicle in a 9-year-old boy who was treated with plate fixation and bone autograft. The majority of patients who undergo surgery because of cosmetic or functional problem heal well and proceed with a normal, unrestricted life. However, for those patients who are not bothered by the cosmetic appearance of the pseudarthrosis and are asymptomatic in that they are not functionally limited, non-surgical treatment is a viable option.

We present the case of a 14-year-old boy with a right distal radial fracture accompanied by a severely displaced complete distal ulnar physeal separation and associated median nerve compromise. This injury is known as Galeazzi-equivalent lesion in children and is an extremely rare injury associated with growth arrest. Recognition of the lesion can be difficult but wide displacement may be associated with other significant injuries such as neurovascular compromise. Prompt intervention reversed the neurological symptoms. At 10-month postoperation there was neither growth arrest nor loss of motion. Complete separation of the ulna physis remains often because of soft tissue interposition or capsule problems and prompt reduction is recommended in the literature as a priority.

A 63-year-old man fell from a ladder, thus causing an axial compression injury to the right ankle. Severe deformity was evident and the ankle could not be reduced by simple manipulation. The skin was tented and appearing critically contused. Radiographs revealed an oblique fracture of the posterior aspect of the talar body with dislocation of both the talo-navicular and subtalar joints, an injury previously not described in the literature. The fracture-dislocation was anatomically reduced within 3 h of presentation and stability achieved with two headless buried compression screws. CT scan confirmed anatomical reduction and the patient remained non-weight bearing in a cast for 6 weeks. One year postoperatively, the patient remains pain-free with no radiological signs of avascular necrosis of the talus. This injury is unique and despite its severity and soft tissue compromise good quality reduction and internal fixation resulted in an excellent clinical outcome.

Background: Capitellar fractures result from shearing and wedging forces transmitted to the elbow that create complex injury patterns that are difficult to stabilize. The fracture often extends into the trochlea and is associated with posterior comminution of the humerus and soft tissue injury. Diverse fixation techniques are required to restore the anatomy perfectly to ensure elbow function is regained., Materials and Methods: This study presents the results of treatment of 26 patients followed up prospectively and treated within a week of injury. Clinical and radiographic evaluations were done annually by an independent reviewer, and the Mayo Elbow Performance Index (MEPI) was calculated., Results: Results were excellent in 9 patients, good in 9, and fair in 8 when assessed at an average of 46 months (range, 19-94 months) postoperatively using the MEPI, which averaged 81.3 (range 65-100). The poorer results occurred in patients with severe injuries associated with posterior comminution of the humerus and who required more extensive reconstructive procedures. All pain scores improved significantly and activities of daily living were restored in all groups, All returned to employment within 6 months, but 6 (3 type 2 and 3 type 3) had altered their roles from manual to administrative work., Conclusion: This series reflects the challenges in reconstructing precisely this cartilage-covered sphere, especially when there are multiple fragments. Modern techniques of fracture stabilization that concentrate on restoring a circular structure may require a different approach and engineering solutions., Level of Evidence: Level 4; Case series, treatment study.

The purpose of this study was to determine if an association exists between scaphoid-trapezium-trapezoid arthritis and lunate morphology. Plain neutral posteroanterior radiographs were evaluated for 48 patients with STT arthritis and 96 patients from a control group. Lunate type was determined using capitate-triquetrum (C-T) distance. A type I lunate was defined as a C-T distance < or =2 mm. A type II lunate was defined as a C-T distance > or =4 mm. Lunate type was recorded and compared between those with STT arthritis and a control group. The groups were similar with regard to age, gender and handedness. Type II lunates were found in 83% of cases with STT arthritis and in 64% of controls. STT OA was associated with type II lunate wrists (P = 0.02; OR = 0.35; CI: 0.15-0.82). We postulate that variations in scaphoid motion secondary to lunate morphology may contribute to the development of STT OA.

This study assessed the effect of excision of the scaphoid and triquetrum on the range of motion of the embalmed cadaver wrist joint after midcarpal stabilisation. The range of motion was measured in 12 cadaver wrists before and after stabilisation of the joints between the lunate, capitate, triquetrum and hamate. This was measured again following resection of the scaphoid and then the triquetrum. Scaphoid excision after four-corner stabilisation increased the radioulnar (RU) arc by 12 degrees and the flexion-extension (F-E) arc by 10 degrees. Subsequent excision of the triquetrum, to produce a three-corner stabilisation, further increased the RU arc by 7 degrees and the F-E arc by 6 degrees. Three-corner stabilisation with excision of scaphoid and triquetrum improved wrist motion in embalmed cadavers.

Purpose: To investigate the articulating surface of the triquetrum-hamate joint (TqH)., Methods: The carpal bones of 46 wrist specimens were examined. The shape of the TqH joint surfaces were investigated, with focus on variations in the shape of the hamate and corresponding triquetrum and the presence and position of convex and concave surfaces., Results: Two distinct patterns of hamate TqH articular surfaces were identified, designated type I (31 of 46) and type II (15 of 46). The triquetral TqH articular surface also was found to have 2 distinct patterns, designated type A (18 of 46) and type B (15 of 46). Of the triquetrums examined 13 of 46 had characteristics that were a variable mixture of the 2 identifiable triquetral surface types, but these did not have sufficient similarity to constitute a third triquetrum surface type. The corresponding articulation patterns of these joint surfaces showed a strong trend for a type A triquetrum to articulate with a type I hamate (18 of 46 of all joints) and for a type B triquetrum to articulate with a type II hamate (13 of 46 of all joints). No association was seen between lunate types and type I or type II hamates., Conclusions: These findings suggest the existence of 2 distinct TqH joint patterns, which have been termed TqH-1 and TqH-2. There appears to be a spectrum of variation between these 2 identifiable types. As a result, the TqH is best described as a spectrum, with TqH-1 at one end and TqH-2 at the other. A TqH-1 joint is a helicoidal configuration. It is double-faceted, with the hamate and the triquetrum articular surfaces possessing complementary concave and convex parts. A TqH-2 joint has a predominantly oval convex shape, whereas the primarily concave triquetrum is better described as a dish for the flatter hamate. It has no hamate groove or distal ridge.

Purpose: Symptomatic isolated scaphotrapeziotrapezoid joint arthritis affects approximately 10% of the population. Investigation of the technique of arthroscopic debridement of this joint was done to assess symptom relief achieved and record any resulting postoperative morbidity., Methods: Ten consecutive patients with persistent symptoms were assessed prospectively by a research nurse. Measurements of range of motion and grip strength were obtained before and after surgery. Visual analogue scores for pain and satisfaction levels also were recorded and any limitation to activities of daily living were noted., Results: Good or excellent subjective results were achieved in 9 patients at final review at an average of 36 months (12-65 mo) after arthroscopic debridement. One patient graded the result as fair owing to failure to achieve normal range of motion. All patients showed a reduction in visual analogue pain scores, which improved from a mean of 86 to 14 points. The mean Green and O'Brien wrist scores improved from 63 to 91., Conclusions: Arthroscopic debridement can provide good short-term symptomatic relief for isolated scaphotrapeziotrapezoid arthritis with low risk for surgical complications.