Search

TiO2 (B) has attracted considerable attention in recent years because it exhibits the largest capacity among all studied titania polymorphs, with high rate performance for Li intercalation being achieved when this material is nanostructured. However, due to the complex nature of its lithiation mechanism and practical challenges in probing Li structure in nanostructured materials, a definitive understanding of the lithiation thermodynamics has yet to be established. A comprehensive mechanistic investigation of the TiO2 (B) nanoparticles is therefore presented using a combination of in situ/operando X-ray pair distribution function (PDF) and electrochemical techniques. The discharge begins with surface reactions in parallel with Li insertion into the subsurface of the nanoparticles. The Li bulk insertion starts with a single-phase reaction into the A2 site, a position adjacent to the b-channel. A change of the Li diffusion pathway from that along this open channel to that along the c-direction is likely to occur at the composition of Li0.25TiO2 until Li0.5TiO2 is attained, leading to a two-step A2-site incorporation with one step kinetically distinct from the other. Subsequent Li insertion involves the C' site, a position situated inside the channel, and follows a rapid two-phase reaction to form Li0.75TiO2. Due to the high diffusion barrier associated with the further lithiation, Li insertion into the A1 site, another position adjacent to the channel neighboring the A2 sites, is kinetically restricted. This study not only explores the lithiation reaction thermodynamics and mechanisms of nanoparticulate TiO2 (B) but also serves as a strong reference for future studies of the bulk phase, and for future calculations to study the Li transport properties of TiO2 (B). [ABSTRACT FROM AUTHOR]

Self-assembly remains the most efficientroute to the formationof ordered nanostructures, including the double gyroid network phasein diblock copolymers based on two intergrown network domains. Herewe use self-consistent field theory to show that a tricontinuous structurewith monoclinic symmetry, called 3ths(5), based onthe intergrowth of three distorted thsnets, is anequilibrium phase of triblock star-copolymer melts when an extendedmolecular core is introduced. The introduction of the core enhancesthe role of chain stretching by enforcing larger structural lengthscales, thus destabilizing the hexagonal columnar phase in favor ofmorphologies with less packing frustration. This study further demonstratesthat the introduction of molecular cores is a general concept fortuning the relative importance of entropic and enthalpic free energycontributions, hence providing a tool to stabilize an extended repertoireof self-assembled nanostructured materials. [ABSTRACT FROM AUTHOR]

An example demonstrates that Joreskog's (1969) suggested sufficient conditions for identifying unknown parameters tn a confirmatory factor analytic model with correlated factors are not sufficient. Sufficient conditions for identifying parameters in the class of models used by Burr et al. (1978)to estimate population structures of well-being from various indicators of satisfaction are given. The six hypotheses stated in Burt et al. are reconsidered and similarly supported when their final covariance model is restricted so as to meet the sufficiency conditions given here. [ABSTRACT FROM AUTHOR]

The spinel Li 4 Ti 5 O 12 (LTO) is a promising lithium ion battery anode material with the potential to supplement graphite as an industry standard, but its low electrical conductivity and Li-ion diffusivity need to be overcome. Here, mesoporous LTO microspheres with carbon-coatings were formed by phase separation of a homopolymer from microphase-separated block copolymers of varying molar masses containing sol-gel precursors. Upon heating the composite underwent a sol-gel condensation reaction followed by the eventual pyrolysis of the polymer templates. The optimised mesoporous LTO microspheres demonstrated an excellent electrochemical performance with an excellent specific discharge capacity of 164 mA h g -1 , 95% of which was retained after 1000 cycles at a C-rate of 10., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Metal oxide microparticles with well-defined internal mesostructures are promising materials for a variety of different applications, but practical routes to such materials that allow the constituent structural length scales to be precisely tuned have thus far been difficult to realize. Herein, we describe a novel platform methodology that utilizes self-assembled block copolymer (BCP) microparticles synthesized by dispersion polymerization in supercritical CO 2 (scCO 2 ) as universal structure directing agents for both hydrolytic and nonhydrolytic sol-gel routes to metal oxides. Spherically structured poly(methyl methacrylate- block-4-vinylpyridine) (PMMA- b-P4VP) BCP microparticles are translated into a series of the corresponding organic/inorganic composites and pure inorganic derivatives with a high degree of fidelity for the metal oxides TiO 2 and LiFePO 4 . The final products are comprised of particles close to 1 μm in size with a highly ordered internal morphology of interconnected spheres between 20-40 nm in size. Furthermore, our approach is readily scalable, enabling grams of pure or carbon-coated TiO 2 and LiFePO 4 , respectively, to be fabricated in a facile two step route involving ambient temperature mixing and drying stages. Given that both length scales within these BCP microparticles can be controlled independently by minor variations in the reagent quantities used, the present general strategy could represent a milestone in the design and synthesis of hierarchical metal oxides with completely tunable dimensions.

Lithium iron phosphate (LFP) is currently one of the main cathode materials used in lithium-ion batteries due to its safety, relatively low cost, and exceptional cycle life. To overcome its poor ionic and electrical conductivities, LFP is often nanostructured, and its surface is coated with conductive carbon (LFP/C). Here, we demonstrate a sol-gel based synthesis procedure that utilizes a block copolymer (BCP) as a templating agent and a homopolymer as an additional carbon source. The high-molecular-weight BCP produces self-assembled aggregates with the precursor-sol on the 10 nm scale, stabilizing the LFP structure during crystallization at high temperatures. This results in a LFP nanonetwork consisting of interconnected ∼10 nm-sized particles covered by a uniform carbon coating that displays a high rate performance and an excellent cycle life. Our "one-pot" method is facile and scalable for use in established battery production methodologies.

The formation of the biophotonic gyroid material in butterfly wing scales is an exceptional feat of evolutionary engineering of functional nanostructures. It is hypothesized that this nanostructure forms by chitin polymerization inside a convoluted membrane of corresponding shape in the endoplasmic reticulum. However, this dynamic formation process, including whether membrane folding and chitin expression are simultaneous or sequential processes, cannot yet be elucidated by in vivo imaging. We report an unusual hierarchical ultrastructure in the butterfly Thecla opisena that, as a solid material, allows high-resolution three-dimensional microscopy. Rather than the conventional polycrystalline space-filling arrangement, a gyroid occurs in isolated facetted crystallites with a pronounced size gradient. When interpreted as a sequence of time-frozen snapshots of the morphogenesis, this arrangement provides insight into the formation mechanisms of the nanoporous gyroid material as well as of the intracellular organelle membrane that acts as the template.