Search

The National Spherical Torus Experiment (NSTX) has undergone a major upgrade, and the NSTX Upgrade (NSTX-U) Project was completed in the summer of 2015. NSTX-U first plasma was subsequently achieved, diagnostic and control systems have been commissioned, the H-mode accessed, magnetic error fields identified and mitigated, and the first physics research campaign carried out. During ten run weeks of operation, NSTX-U surpassed NSTX record pulse-durations and toroidal fields (TF), and high-performance ∼1 MA H-mode plasmas comparable to the best of NSTX have been sustained near and slightly above the n = 1 no-wall stability limit and with H-mode confinement multiplier H98y,2 above 1. Transport and turbulence studies in L-mode plasmas have identified the coexistence of at least two ion-gyro-scale turbulent micro-instabilities near the same radial location but propagating in opposite (i.e. ion and electron diamagnetic) directions. These modes have the characteristics of ion-temperature gradient and micro-tearing modes, respectively, and the role of these modes in contributing to thermal transport is under active investigation. The new second more tangential neutral beam injection was observed to significantly modify the stability of two types of Alfven eigenmodes. Improvements in offline disruption forecasting were made in the areas of identification of rotating MHD modes and other macroscopic instabilities using the disruption event characterization and forecasting code. Lastly, the materials analysis and particle probe was utilized on NSTX-U for the first time and enabled assessments of the correlation between boronized wall conditions and plasma performance. These and other highlights from the first run campaign of NSTX-U are described.

The National Spherical Torus Experiment (NSTX) is currently being upgraded to operate at twice the toroidal field and plasma current (up to 1T and 2MA), with a second, more tangentially aimed neutral beam (NB) for current and rotation control, allowing for pulse lengths up to 5s. Recent NSTX physics analyses have addressed topics that will allow NSTX-Upgrade to achieve the research goals critical to a Fusion Nuclear Science Facility. These include producing stable, 100% non-inductive operation in high-performance plasmas, assessing plasma-material interface (PMI) solutions to handle the high heat loads expected in the next-step devices and exploring the unique spherical torus (ST) parameter regimes to advance predictive capability. Non-inductive operation and current profile control in NSTX-U will be facilitated by co-axial helicity injection (CHI) as well as radio frequency (RF) and NB heating. CHI studies using NIMROD indicate that the reconnection process is consistent with the 2D Sweet-Parker theory. Full-wave AORSA simulations show that RF power losses in the scrape-off layer (SOL) increase significantly for both NSTX and NSTX-U when the launched waves propagate in the SOL. Toroidal Alfvén eigenmode avalanches and higher frequency Alfvén eigenmodes can affect NB-driven current through energy loss and redistribution of fast ions. The inclusion of rotation and kinetic resonances, which depend on collisionality, is necessary for predicting experimental stability thresholds of fast growing ideal wall and resistive wall modes. Neutral beams and neoclassical toroidal viscosity generated from applied 3D fields can be used as actuators to produce rotation profiles optimized for global stability. DEGAS-2 has been used to study the dependence of gas penetration on SOL temperatures and densities for the MGI system being implemented on the Upgrade for disruption mitigation. PMI studies have focused on the effect of ELMs and 3D fields on plasma detachment and heat flux handling. Simulations indicate that snowflake and impurity seeded radiative divertors are candidates for heat flux mitigation in NSTX-U. Studies of lithium evaporation on graphite surfaces indicate that lithium increases oxygen surface concentrations on graphite, and deuterium-oxygen affinity, which increases deuterium pumping and reduces recycling. In situ and test-stand experiments of lithiated graphite and molybdenum indicate temperature-enhanced sputtering, although that test-stand studies also show the potential for heat flux reduction through lithium vapour shielding. Non-linear gyro kinetic simulations have indicated that ion transport can be enhanced by a shear-flow instability, and that non-local effects are necessary to explain the observed rapid changes in plasma turbulence. Predictive simulations have shown agreement between a microtearing-based reduced transport model and the measured electron temperatures in a microtearing unstable regime. Two Alfvén eigenmode-driven fast ion transport models have been developed and successfully benchmarked against NSTX data. Upgrade construction is moving on schedule with initial physics research operation of NSTX-U planned for mid-2015.

Research on the National Spherical Torus Experiment, NSTX, targets physics understanding needed for extrapolation to a steady-state ST Fusion Nuclear Science Facility, pilot plant, or DEMO. The unique ST operational space is leveraged to test physics theories for next-step tokamak operation, including ITER. Present research also examines implications for the coming device upgrade, NSTX-U. An energy confinement time, τE, scaling unified for varied wall conditions exhibits a strong improvement of BTτE with decreased electron collisionality, accentuated by lithium (Li) wall conditioning. This result is consistent with nonlinear microtearing simulations that match the experimental electron diffusivity quantitatively and predict reduced electron heat transport at lower collisionality. Beam-emission spectroscopy measurements in the steep gradient region of the pedestal indicate the poloidal correlation length of turbulence of about ten ion gyroradii increases at higher electron density gradient and lower Ti gradient, consistent with turbulence caused by trapped electron instabilities. Density fluctuations in the pedestal top region indicate ion-scale microturbulence compatible with ion temperature gradient and/or kinetic ballooning mode instabilities. Plasma characteristics change nearly continuously with increasing Li evaporation and edge localized modes (ELMs) stabilize due to edge density gradient alteration. Global mode stability studies show stabilizing resonant kinetic effects are enhanced at lower collisionality, but in stark contrast have almost no dependence on collisionality when the plasma is off-resonance. Combined resistive wall mode radial and poloidal field sensor feedback was used to control n = 1 perturbations and improve stability. The disruption probability due to unstable resistive wall modes (RWMs) was surprisingly reduced at very high βN/li > 10 consistent with low frequency magnetohydrodynamic spectroscopy measurements of mode stability. Greater instability seen at intermediate βN is consistent with decreased kinetic RWM stabilization. A model-based RWM state-space controller produced long-pulse discharges exceeding βN = 6.4 and βN/li = 13. Precursor analysis shows 96.3% of disruptions can be predicted with 10 ms warning and a false positive rate of only 2.8%. Disruption halo currents rotate toroidally and can have significant toroidal asymmetry. Global kinks cause measured fast ion redistribution, with full-orbit calculations showing redistribution from the core outward and towards V∥/V = 1 where destabilizing compressional Alfvén eigenmode resonances are expected. Applied 3D fields altered global Alfvén eigenmode characteristics. High-harmonic fast-wave (HHFW) power couples to field lines across the entire width of the scrape-off layer, showing the importance of the inclusion of this phenomenon in designing future RF systems. The snowflake divertor configuration enhanced by radiative detachment showed large reductions in both steady-state and ELM heat fluxes (ELMing peak values down from 19 MW m-2 to less than 1.5 MW m-2). Toroidal asymmetry of heat deposition was observed during ELMs or by 3D fields. The heating power required for accessing H-mode decreased by 30% as the triangularity was decreased by moving the X-point to larger radius, consistent with calculations of the dependence of E × B shear in the edge region on ion heat flux and X-point radius. Co-axial helicity injection reduced the inductive start-up flux, with plasmas ramped to 1 MA requiring 35% less inductive flux. Non-inductive current fraction (NICF) up to 65% is reached experimentally with neutral beam injection at plasma current Ip = 0.7 MA and between 70-100% with HHFW application at Ip = 0.3 MA. NSTX-U scenario development calculations project 100% NICF for a large range of 0.6 < Ip (MA) < 1.35. © 2013 IAEA, Vienna.

In the last two experimental campaigns, the low aspect ratio NSTX has explored physics issues critical to both toroidal confinement physics and ITER. Experiments have made extensive use of lithium coatings for wall conditioning, correction of non-axisymmetric field errors and control of n = 1 resistive wall modes (RWMs) to produce high-performance neutral-beam heated discharges extending to 1.7 s in duration with non-inductive current fractions up to 0.7. The RWM control coils have been used to trigger repetitive ELMs with high reliability, and they have also contributed to an improved understanding of both neoclassical tearing mode and RWM stabilization physics, including the interplay between rotation and kinetic effects on stability. High harmonic fast wave (HHFW) heating has produced plasmas with central electron temperatures exceeding 6 keV. The HHFW heating was used to show that there was a 20-40% higher power threshold for the L-H transition for helium than for deuterium plasmas. A new diagnostic showed a depletion of the fast-ion density profile over a broad spatial region as a result of toroidicity-induced Alfvén eigenmodes (TAEs) and energetic-particle modes (EPMs) bursts. In addition, it was observed that other modes (e.g. global Alfvén eigenmodes) can trigger TAE and EPM bursts, suggesting that fast ions are redistributed by high-frequency AEs. The momentum pinch velocity determined by a perturbative technique decreased as the collisionality was reduced, although the pinch to diffusion ratio, Vpinch/χ, remained approximately constant. The mechanisms of deuterium retention by graphite and lithium-coated graphite plasma-facing components have been investigated. To reduce divertor heat flux, a novel divertor configuration, the 'snowflake' divertor, was tested in NSTX and many beneficial aspects were found. A reduction in the required central solenoid flux has been realized in NSTX when discharges initiated by coaxial helicity injection were ramped in current using induction. The resulting plasmas have characteristics needed to meet the objectives of the non-inductive start-up and ramp-up program of NSTX. © 2011 IAEA, Vienna.

The mission of the National Spherical Torus Experiment (NSTX) is the demonstration of the physics basis required to extrapolate to the next steps for the spherical torus (ST), such as a plasma facing component test facility (NHTX) or an ST based component test facility (ST-CTF), and to support ITER. Key issues for the ST are transport, and steady state high β operation. To better understand electron transport, a new high-k scattering diagnostic was used extensively to investigate electron gyro-scale fluctuations with varying electron temperature gradient scale length. Results from n = 3 braking studies are consistent with the flow shear dependence of ion transport. New results from electron Bernstein wave emission measurements from plasmas with lithium wall coating applied indicate transmission efficiencies near 70% in H-mode as a result of reduced collisionality. Improved coupling of high harmonic fast-waves has been achieved by reducing the edge density relative to the critical density for surface wave coupling. In order to achieve high bootstrap current fraction, future ST designs envision running at very high elongation. Plasmas have been maintained on NSTX at very low internal inductance li ∼ 0.4 with strong shaping (κ ∼ 2.7, δ ∼ 0.8) with βN approaching the with-wall β-limit for several energy confinement times. By operating at lower collisionality in this regime, NSTX has achieved record non-inductive current drive fraction fNI ∼ 71%. Instabilities driven by super-Alfvénic ions will be an important issue for all burning plasmas, including ITER. Fast ions from NBI on NSTX are super-Alfvénic. Linear toroidal Alfvén eigenmode thresholds and appreciable fast ion loss during multi-mode bursts are measured and these results are compared with theory. The impact of n > 1 error fields on stability is an important result for ITER. Resistive wall mode/resonant field amplification feedback combined with n = 3 error field control was used on NSTX to maintain plasma rotation with β above the no-wall limit. Other highlights are results of lithium coating experiments, momentum confinement studies, scrape-off layer width scaling, demonstration of divertor heat load mitigation in strongly shaped plasmas and coupling of coaxial helicity injection plasmas to ohmic heating ramp-up. These results advance the ST towards next step fusion energy devices such as NHTX and ST-CTF. © 2009 IAEA, Vienna.

A fast (≤0.1 ms) and compact 'multi-colour' soft x-ray array has been developed for time and space-resolved electron temperature (Te) measurements in magnetically confined fusion (MCF) plasmas. The electron temperature is obtained by modelling the slope of the continuum radiation from ratios of the available 1D-Abel inverted radial emissivity profiles over different energy ranges, with no a priori assumptions of plasma profiles, magnetic field reconstruction constraints or need of shot-to-shot reproducibility. This technique has been used to perform fast Te measurements in the National Spherical Torus Experiment (NSTX), avoiding the limitations imposed by the well-known multi-point Thompson scattering, electron cyclotron emission and electron Bernstein wave mode conversion diagnostics. The applicability of this 'multi-colour' technique for magnetohydrodynamic (MHD) mode recognition and a variety of perturbative electron and impurity transport studies in MCF plasmas is also discussed. Reconstructed 'multi-colour' emissivity profiles for a variety of NSTX scenarios are presented here for the first time. © 2007 IOP Publishing Ltd.

A major research goal of the national spherical torus experiment is establishing long-pulse, high beta, high confinement operation and its physics basis. This research has been enabled by facility capabilities developed during 2001 and 2002, including neutral beam (up to 7 MW) and high harmonic fast wave (HHFW) heating (up to 6 MW), toroidal fields up to 6 kG, plasma currents up to 1.5 MA, flexible shape control, and wall preparation techniques. These capabilities have enabled the generation of plasmas with βT ≡ /(BT02/2μ0) of up to 35%. Normalized beta values often exceed the no-wall limit, and studies suggest that passive wall mode stabilization enables this for H mode plasmas with broad pressure profiles. The viability of long, high bootstrap current fraction operations has been established for ELMing H mode plasmas with toroidal beta values in excess of 15% and sustained for several current relaxation times. Improvements in wall conditioning and fuelling are likely contributing to a reduction in H mode power thresholds. Electron thermal conduction is the dominant thermal loss channel is auxiliary heated plasmas examined thus far. HHFW effectively heats electrons, and its acceleration of fast beam ions has been observed. Evidence for HHFW current drive is obtained by comparison of the loop voltage evolution in plasmas with matched density and temperature profiles but varying phases of launched HHFW waves. Studies of emissions from electron Bernstein waves indicate a density scale length dependence of their transmission across the upper hybrid resonance near the plasma edge that is consistent with theoretical predictions. A peak heat flux to the divertor targets of 10 MW m-2 has been measured in the H mode, with large asymmetries being observed in the power deposition between the inner and outer strike points. Non-inductive plasma startup studies have focused on coaxial helicity injection. With this technique, toroidal currents up to 400 kA have been driven, and studies to assess flux closure and coupling to other current drive techniques have begun.

Scintillator-based 'optical' soft x-ray (OSXR) arrays have been investigated as a replacement for the conventional silicon (Si)-based diode arrays used for imaging, tomographic reconstruction, magnetohydrodynamics, transport, and turbulence studies in magnetically confined fusion plasma research. An experimental survey among several scintillator candidates was performed, measuring the relative and absolute conversion efficiencies of soft x rays to visible light. Further investigations took into account glass and fiber-optic faceplates (FOPs) as substrates, and a thin aluminum foil (150 nm) to reflect the visible light emitted by the scintillator back to the optical detector. Columnar (crystal growth) thalliumdoped cesium iodide (CsI:T1) deposited on an FOP, was found to be the best candidate for the previously mentioned plasma diagnostics. Its luminescence decay time of the order of ~1-10 Us is thus suitable for the 10 [micro]s time resolution required for the development of scintillator-based SXR plasma diagnostics. A prototype eight channel OSXR array using CsI:T1 was designed, built, and compared to an absolute extreme ultraviolet diode counterpart: its operation on the National Spherical Torus Experiment showed a lower level of induced noise relative to the Si-based diode arrays, especially during neutral beam injection heated plasma discharges. The OSXR concept can also be implemented in less harsh environments for basic spectroscopic laboratory plasma diagnostics. OCIS codes: 040.7480, 300.6560, 340.7440, 350.5400.

The National Spherical Torus Experiment (NSTX) at Princeton University, Princeton, NJ, is designed to assess the potential of the low-aspect-ratio spherical torus concept for magnetic plasma confinement. The plasma has been heated by up to 7 MW of neutral beam injection (NBI) at an injection energy of 100 keV and up to 6 MW of high harmonic fast wave (HHFW) at 30 MHz. NSTX has achieved [[beta].sub.T] of 32%. A variety of MHD phenomena have been observed to limit [beta]. NSTX has now begun addressing [T.sub.E] scaling, [beta] limits, and current drive issues. During the NBI heating experiments, a broad [T.sub.i] profile with [T.sub.i] up to 2 keV, [T.sub.i] > [T.sub.e] and a large toroidal rotation were observed. Transport analysis suggests that the impurity ions have diffusivities approaching neoclassical. For L-Mode plasmas, [T.sub.E] is up to two times the ITER97L H-Mode scaling and exceeds the ITER98pby2 H-Mode scaling in some cases. Transitions to H-Mode have been observed which result in an approximate doubling of [T.sub.E] after the transition in some conditions. During HHFW heating, [T.sub.e] > [T.sub.i] and [T.sub.e] up to 3.5 keV were observed. Current drive has been studied using both coaxial helicity injection with up to 390 kA of toroidal current and HHFW. HHFW has produced H-modes with significant bootstrap current fraction at low [I.sub.p], high q, and high [[beta].sub.p]. Index Terms--Fusion reactors, plasma confinement, tokamaks.

The measured conversion efficiencies at 9.89, 23.6, 44.7, and 160 [Angstrom] of P45 phosphor screens, as well as those of paraterphenyl, tetraphenyl butadiene, and sodium salicylate at 9.89, 44.7, and 67.6 [Angstrom], are presented. The conversion efficiency is defined as the ratio of photoelectrons ejected from the photocathode of a visible detector, which are excited by the scintillated photons that are emitted from the phosphor in a solid angle of 2[Pi], to the number of soft-x-ray photons incident on the phosphor. The effect of the phosphor's thickness on the conversion efficiency was studied. The P45 phosphor converts the soft-x-ray photon (10-200 [Angstrom]) into an order of magnitude more visible photons than the low-Z phosphors. The P45 phosphor screen used in conjunction with a photomultiplier tube offers a soft-x-ray photodetector with a conversion efficiency that ranges from 0.5 to 160 [Angstrom] to 12 at 9.89 angstroms and a high electronic gain.

Optical diagnostics will be critical for the operation and performance assessment of burning plasma experiments, such as ITER. At the same time, extracting light for these diagnostics with reflective mirrors becomes difficult in the burning plasma environment due to the deleterious effects of the prolonged exposure on plasma and nuclear radiations. As an alternative, we explore the possibility to use freestanding diffractive optical elements, such as transmission gratings and zone plates, as light extractors. Since in diffractive systems, light is deflected by periodic slits rather than by a surface, these may withstand plasma exposure with less degradation of their optical properties. To investigate this possibility, we developed freestanding transmission gratings for the visible range and exposed them to conditions resembling (or even exceeding) those expected for the ITER “first mirrors.” The results of this study indicate that the gratings can withstand high heat fluxes and plasma and energetic radiation bombardment. Additionally, in contrast to the reflective elements, the extraction efficiency of diffractive elements may even improve with plasma exposure, which is possibly due to the shaping and thinning of the grating bars by plasma erosion. Moreover, in tightly collimated configurations, even very thin gratings can be used to extract light from hot fusion plasmas, as demonstrated by our tests of an extreme ultraviolet extractor at the National Spherical Torus Experiment. [ABSTRACT FROM AUTHOR]

A fast (<=0.1 ms) and compact “multicolor” scintillator-based optical soft x-ray (OSXR) array has been developed for time- and space-resolved measurements of the electron temperature [Te(R,t)] profiles in magnetically confined fusion plasmas. The 48-channel tangential multicolor OSXR prototype was tested on the National Spherical Torus Experiment. Each sight line views the same plasma volume at the midplane (0≤r/a≤1), in three distinct energy ranges determined by beryllium foils with different thicknesses. A tangential view of the toroidally (circular) symmetric plasma allows an Abel inversion of the line-integrated SXR brightness to obtain the x-ray emissivity profiles which are then used to constrain the reconstruction of the fast Te(R,t). The first assessment of the electron temperature is obtained by modeling the slope of the continuum radiation with the ideal double-foil method using both the line-integrated intensity measurements as well as the inverted SXR emissivity profiles. [ABSTRACT FROM AUTHOR]

Presents an analysis of the spectra of highly ionized praseodymium and dysprosium recorded for the Texas tokamac plasma. Description of the spectra; Identification of the lines of highly ionized praseodymium and dysprosium; Composition of the bands.

Presents a study that described an extreme ultraviolet spectroscopic diagnostic for fluctuations of electron density and temperature in tokamak plasmas. Examples of non-spectroscopic techniques for measuring electron density and temperature fluctuations; Equation given for the spectral line emissivity; Correlations of spectral line intensities.

Presents a study which examined time-integrated space-resolved spectra emitted from vacuum spark cerium plasma. Experimental details; Results; Discussion; Conclusion.