Search

Infrastructure and urbanization drive the increasing demand for concrete, which strains natural resources and threatens the ecosystem. Incorporating recycled materials into concrete can fulfill this demand without compromising quality. This study therefore examines the mechanical properties of concrete after replacing sand utilizing fine aggregates of brick powder (BP) using appropriate standard techniques of destructive and nondestructive testing methods. Concrete mixtures were developed by incrementally substituting sand with brick powder in ratios from 5% to 25% and evaluated for workability, compressive strength, and split tensile strength in comparison to conventional concrete. The findings indicate that replacing 10% sand with brick powder improves strength by 29.94%, reduces workability by 42.66%, and increases split tensile strength by 8.74%. A strong link was found between compressive strength, ultrasonic pulse velocity (UPV), and rebound number, which was confirmed by regression analysis. Integrating 10% brick powder improves concrete's mechanical properties and promotes sustainable construction practices. [ABSTRACT FROM AUTHOR]

In the last decade, there has been interest worldwide concern about the antibacterial and antioxidant properties of plants. This work aims to study the antibacterial, antioxidant activities and chemical composition of Eucalyptus globulus essential oil leaves and seeds. Essential oil was extracted from Eucalyptus globulus seeds and leaves by hydrodistillation giving yields of 1.8% and 0.8% respectively, Chemical composition analysis by gas chromatography coupled with mass spectrometry (GC-MS) revealed the presence of a total of 33 compounds in seeds and 28 compounds in leaves. Antibacterial activity showed that essential oils was active against all tested bacterial strains. Antioxidant propriety measured by 2,2-diphenyl-1-picrylhydrazyl (DPPH) showed that essential oils obtained from leaves have higher antioxidant activity when compared to essential oils of seeds. However, the total antioxidant capacity revealed that seeds (22,68 mg EAA/g MS) have high activity with respect to leaves (5,44 mg EAA/g MS). These results confirmed the richness of the two essential oils in phenolic compounds responsible for their biological activity. A comparative bioclimatic study was carried out in order to investigate the effect of climate on chemical composition of Eucalyptus globulus leaves and seeds in Morocco. Factorial component analysis between chemical composition of essential oils from different countries and climatic parameters revealed that 1.8 cineole is strongly correlated with minimal (m) and maximal temperature values (M) and Emberger quotient (Q). Whereas, essential oils extracted from seeds is not affected by these parameters. [ABSTRACT FROM AUTHOR]

Stability of low amoxicillin oral dosage form (5 mg) used in reintroduction drug test was not fully documented. Furthermore, the impact of (1) salt moiety of amoxicillin and (2) amoxicillin – excipient interactions upon the antibiotic formulation stability during the storage was not characterized so that the estimation of the pharmaceutical expiration date from shelf-life was uncertain. Thus, the main goal of this study was to estimate the shelf-life of two formulations of amoxicillin, using a semi-predictive methodology.

In this paper we use the dual Youla parameterisation approach for the robustification of predictive linear control systems using LMI-based constraints. This method based on an approach of convex optimization, is used to robustify the generalized predictive controller GPC algorithm applied to an AutoRegressive Integrated Moving Average (CARIMA) model. The design method consists of two steps. In the first step the synthesis and the robustification of the initial polynomial controller RST-GPC is carried out. This is achieved under constraints on the system output, the control signal and its increment represented as LMI using Youla parameterisation. This controller is then robustified considering frequency and time-domain constraints. In the second step, the new controller is robustified by a dual Youla parameterisation considering frequential and temporal constraints. The effectiveness of this methodology are demonstrated and applied for position control of an induction motor drive. [ABSTRACT FROM AUTHOR]

Introduction: The COVID-19 pandemic has led to unforeseen and novel manifestations, as illustrated by the management of drug shortages through the development of hospital production of sterile pharmaceutical preparations (P2S). Visual inspection of P2S is a release control whose methods are described in monographs of the European Pharmacopoeia (2.9.20) and the United States Pharmacopeia (1790). However, these non-automated visual methods require training and proficiency testing of personnel. The main objective of this work was to compare the reliability and speed of analysis of two visual methods and an automated method for detecting visible particles by image analysis in P2S. Furthermore, these methods were used to evaluate sources of particulate contamination during pre-production processes (washing, disinfection, depyrogenation) and production (filling, capping)., Materials and Methods: Three pharmacy technicians examined 41 clear glass vials of type I, 10 and/or 50 mL through manual visual inspection (MVI), semi-automated (SAVI), and automated (AVI) inspection. The vials were distributed as follows: (i) 16 vials of water for injection containing either glass particles (224 µm or 600 µm), stopper fragments, or textile fibres; (ii) five sterile injectable specialties; (iii) 20 vials of water for injection prepared under different pre-production conditions., Results and Discussion: MVI and SAVI detected 100% of visible particles compared with 28% for AVI, which showed a deficiency in detecting textile fibres. All three methods correctly analysed P2S that did not contain visible particles. The three methods detected particles in vials maintained under International Organization for Standardization (ISO) 9 pre-production conditions. However, detections by (i) MVI and SAVI, and by (ii) AVI of particles contained in vials maintained under ISO 8 pre-production conditions were deemed satisfactory and unsatisfactory, respectively., Conclusion: The importance of visual inspection of P2S requires rapid, sensitive, and reliable detection methods. In this context, MVI and SAVI have proven to be more effective than AVI for a more competitive financial, training, and implementation investment., Competing Interests: Competing interests: None declared., (© European Association of Hospital Pharmacists 2024. Re-use permitted under CC BY. Published by BMJ.)

During the early months of the COVID-19 pandemic, the international medical product supply chain was tight, causing breaks in the availability of neuromuscular blocking agents essential for the treatment of patients in intensive care units. The present study describes the pharmaceutical development of an injectable 2 mg/mL solution of pancuronium bromide (PC) in a very short lapse of time. The sterile solution was compounded into a good manufacturing practice grade A clean room, filtered (0.2 µm) and filled into 10 mL type I glass, manually sealed with bromobutyl rubber stoppers. A novel HPLC-MS stability indicating method for pancuronium quantification and its degradation product was developed and validated. This fast, sensitive and straightforward method was used to study the stability of the formulation using a semi-predictive method, enabling a very fast attribution of a temporary shelf-life, which was confirmed by a classic prospective stability study. The production line and the analytical tools set-up were performed in six weeks and the semi-predictive stability study was conducted in 90 days, allowing us to predict a shelf life, which was successfully confirmed by prospective study. In conclusion, using innovative methods, we were able to rapidly overcome the shortage of a critical drug., (Copyright © 2023. Published by Elsevier B.V.)

Rheumatoid synovitis is infiltrated by immune cells that interact with synoviocytes, leading to the pannus formation. Inflammation or cell interaction effects are mainly evaluated with cytokine production, cell proliferation or migration. Few studies interest on cell morphology. Here, the purpose was to deepen some morphological changes of synoviocytes or immune cells under inflammatory conditions. Inflammatory cytokines, IL-17 and TNF that are largely involved in RA pathogenesis, induced a change in synoviocyte morphology, inducing a retracted cell with higher number of pseudopodia. Several morphological parameters decreased in inflammatory conditions: cell confluence, area and motility speed. The same impact on cell morphology was observed in co-culture of synoviocytes and immune cells in inflammatory/non-inflammatory conditions or with cell activation (miming the in vivo situation), affecting both cell types: synoviocytes were retracted and inversely immune cells proliferated, indicating that cell activation induced a morphological change of cells. In contrast, with RA but not control synoviocytes, cell interactions were not sufficient to affect PBMC and synoviocyte morphology. The morphological effect came only from the inflammatory environment. These findings reveal that the inflammatory environment or cell interactions induced massive changes in control synoviocytes, with cell retraction and increase of pseudopodia number, leading to better interactions with other cells. Except in the case of RA, the inflammatory environment was absolutely required for such changes., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 The Authors. Published by Elsevier GmbH.. All rights reserved.)

In the context of twenty-first-century information and communication technologies, the Technological Pedagogical Content Knowledge (TPACK) framework is a new way of conceptualizing categories of knowledge required by teachers to achieve technology integration in educational practice. The main purpose of this review is to identify research on the TPACK framework in the field of health professions education. Journal empirical studies from 4 databases are included in this review. Of the 76 selected articles, nine met the selection criteria. The findings in the examined papers highlighted four themes: TPACK level measurement, TPACK relationship with other variables, TPACK application, and professional development. Research on the TPACK framework in the health professions education area is still lacking; however, the finding indicates that the TPACK as a theoretical foundation generated positive outcomes that can guide practitioners and researchers' future practice and investigations., Competing Interests: Conflict of InterestThe authors declare no competing interests., (© The Author(s) under exclusive licence to International Association of Medical Science Educators 2023. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

The morphology of fibroblast-like synoviocytes (FLS) issued from the synovial fluid (SF) of patients suffering from osteoarthritis (OA), rheumatoid arthritis (RA), or from healthy subjects (H), as well as the ultrastructure and mechanical properties of the FLS-secreted extracellular vesicles (EV), were analyzed by confocal microscopy, transmission electron microscopy, atomic force microscopy, and tribological tests. EV released under healthy conditions were constituted of several lipid bilayers surrounding a viscous inner core. This "gel-in" vesicular structure ensured high mechanical resistance of single vesicles and good tribological properties of the lubricant. RA, and to a lesser extent OA, synovial vesicles had altered morphology, corresponding to a "gel-out" situation with vesicles surrounded by a viscous gel, poor mechanical resistance, and poor lubricating qualities. When subjected to inflammatory conditions, healthy cells developed phenotypes similar to that of RA samples, which reinforces the importance of inflammatory processes in the loss of lubricating properties of SF.

The quality of the lubricant between cartilaginous joint surfaces impacts the joint's mechanistic properties. In this study, we define the biochemical, ultrastructural, and tribological signatures of synovial fluids (SF) from patients with degenerative (osteoarthritis-OA) or inflammatory (rheumatoid arthritis-RA) joint pathologies in comparison with SF from healthy subjects. Phospholipid (PL) concentration in SF increased in pathological contexts, but the proportion PL relative to the overall lipids decreased. Subtle changes in PL chain composition were attributed to the inflammatory state. Transmission electron microscopy showed the occurrence of large multilamellar synovial extracellular vesicles (EV) filled with glycoprotein gel in healthy subjects. Synovial extracellular vesicle structure was altered in SF from OA and RA patients. RA samples systematically showed lower viscosity than healthy samples under a hydrodynamic lubricating regimen whereas OA samples showed higher viscosity. In turn, under a boundary regimen, cartilage surfaces in both pathological situations showed high wear and friction coefficients. Thus, we found a difference in the biochemical, tribological, and ultrastructural properties of synovial fluid in healthy people and patients with osteoarthritis and arthritis of the joints, and that large, multilamellar vesicles are essential for good boundary lubrication by ensuring a ball-bearing effect and limiting the destruction of lipid layers at the cartilage surface.

The extraordinary potential of semiconductor quantum dots (QDs) has resulted in their widespread application in various fields, from engineering technology and the development of laboratory techniques to biomedical imaging and therapeutic strategies. However, the toxicity of QDs remains a concern and has limited their applications in human health. Better understanding of the behavior of QDs as it relates to their composition will enable the exploration of their limitations and development of a strategy to control their toxicity for potential therapeutic applications. Here, we describe approaches to minimize their toxicities according to the specific cell type, organ, or animal species, summarizing recent promising research at the cellular, organ, and whole-organism level., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Plague, caused by the bacterium Yersinia pestis, is still present in several countries worldwide. Besides, Y. pestis has been designated as Tier 1 agent, the highest rank of bioterrorism agents. In this context, reliable diagnostic methods are of great importance. Here, we have developed an original workflow based upon dried blood spot for simplified sampling of clinical specimens, and specific immuno-mass spectrometry monitoring of Y. pestis biomarkers. Targeted proteins were selectively enriched from dried blood spot extracts by multiplex immunocapture using antibody-coated magnetic beads. After accelerated on-beads digestion, proteotypic peptides were monitored by multiplex LC-MS/MS through the parallel reaction monitoring mode. The DBS-IC-MS assay was designed to quantify both F1 and LcrV antigens, although 10-fold lower sensitivity was observed with LcrV. The assay was successfully validated for F1 with a lower limit of quantification at 5 ng·mL -1 in spiked blood, corresponding to only 0.1 ng on spots. In vivo quantification of F1 in blood and organ samples was demonstrated in the mouse model of pneumonic plague. The new assay could help to simplify the laboratory confirmation of positive point of care F1 dipstick.

Standard parenteral nutrition solutions are mixtures comprising interacting components that may degrade themselves over time. The objective of this study was to investigate the physicochemical and microbiological stability of a hospital preparation for parenteral nutrition in neonatology. The analyses were performed throughout the storage of the preparations at 2-8 °C (up to 4 months). The extent of stability was based on the determination of amino acids dosage, visual and physicochemical properties (glucose and electrolytes concentrations, pH and osmolality measurements, particle counting) and microbiological analysis (sterility test). A thermal degradation of ascorbic acid was conducted to evaluate the antioxidant properties of the parenteral mixture. Physicochemical and microbiological controls were found to comply with the specifications. Amino acids showed a good stability throughout the 4months storage except for cysteine, which was progressively degraded to cystine, conferring a yellow coloration to parenteral solutions. Parenteral nutrition standards solutions remain stable for 4 months at 2-8 °C, ensuring safe administration in preterm infants.

Poor bioavailability and low residence time limit the efficiency of conventional biguanide-based eye drops against Acanthamoeba keratitis. The aim of this work was to formulate an original anti-amoebic thermoreversible ocular gel combining biguanide and metalloproteases inhibitor - chelating agent. Chlorhexidine digluconate (CHX)-ethylenediaminetetraacetic acid disodium salt (Na 2 EDTA) were compounded in poloxamer 407 saline solution. 0.02% CHX - 0.1% Na 2 EDTA loaded thermosensitive ocular gel exhibited appropriate pH (5.73 ± 0.06), iso-osmolality (314 ± 5 mOsm/kg), viscosity (ranged between 15 and 25 mPa.s) and thermal gelation (26.5 °C and 33 °C) properties. Bioadhesion of gel was successfully tested onto isolated bovine eyes as well as the assessment of CHX penetration into the cornea. Intracorneal CHX concentration was found greater than trophozoite minimum amoebicidal concentration and minimal cysticidal concentration after 15-min and 2-h ocular exposure, respectively, while any CHX permeation through the cornea was detected (<51 ng/cm 2 /h). Improvement of CHX ocular bioavailability was attributed to probable solubilization of tear film lipid layer by poloxamer. In vitro efficiency of CHX-Na 2 EDTA ocular gel was confirmed from the drastic reduction of trophozoite and cyst survival (to 25% and 2%, respectively), confirming the potential of the multicomponent pharmaceutical material strategy for the treatment of Acanthamoeba keratitis., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Characterization of cell death currently requires the use of indirect markers, which has largely limited the ability to monitor cell death processes inside the cell. Here, we introduce a new method for the characterization of cell death mechanisms using cadmium telluride quantum dots (CdTe-QDs). Using visible CdTe-QDs with mesenchymal cells (e.g. synoviocytes), live-stream imaging allowed for visualization of cadmium-induced cell death, combining characteristics of apoptosis and autophagy. Initially, similar anti-proliferative effect was observed between 10 µg/ml Cd 2+ and CdTe-QDs at 24 h (cell index/cell density ratio decreased from 0.6 to -16.6, p < 0.05) using techniques that do not require the capacity of CdTe-QDs. Apoptosis was confirmed by the quantification of morphological parameters (reduced surface area, increased cell thickness) and positive labeling with annexin V. Autophagy was confirmed by monodansylcadaverine staining, identifying similar autophagic vacuoles with both Cd 2+ and CdTe-QD. However, QD imaging allowed for visualization of cadmium elements inside cell structures and their kinetic changes leading to cell death. Cell death characteristics were similar in inflammatory and non-inflammatory environment but were induced up to 4 h earlier in the former. Therefore, live-stream imaging of a visible cytotoxic agent has useful applications not currently possible with indirect methods, including chronological monitoring of cell death.

A new institutional clinical trial assessed the improvement of sleep disorders in 40 children with autism treated by immediate-release melatonin formulation in different regimens (0.5 mg, 2 mg, and 6 mg daily) for one month. The objectives of present study were to (i) prepare low-dose melatonin hard capsules for pediatric use controlled by two complementary methods and (ii) carry out a stability study in order to determine a use-by-date. Validation of preparation process was claimed as ascertained by mass uniformity of hard capsules. Multicomponent analysis by attenuated total reflectance Fourier transformed infrared (ATR-FTIR) of melatonin/microcrystalline cellulose mixture allowed to identify and quantify relative content of active pharmaceutical ingredients and excipients. Absolute melatonin content analysis by high performance liquid chromatography in 0.5 mg and 6 mg melatonin capsules was 93.6%±4.1% and 98.7%±6.9% of theoretical value, respectively. Forced degradation study showed a good separation of melatonin and its degradation products. The capability of the method was 15, confirming a risk of false negative <0.01%. Stability test and dissolution test were compliant over 18 months of storage with European Pharmacopoeia. Preparation of melatonin hard capsules was completed manually and melatonin in hard capsules was stable for 18 months, in spite of low doses of active ingredient. ATR-FTIR offers a real alternative to HPLC for quality control of high-dose melatonin hard capsules before the release of clinical batches.

We describe an immunoaffinity-liquid chromatography-tandem mass spectrometry (immuno-LC-MS/MS) protocol for the direct (i.e., without prior culture), sensitive and specific detection of Yersinia pestis in complex matrices. Immunoaffinity enables isolation and concentration of intact bacterial cells from food and environmental samples. After protein extraction and digestion, suitable proteotypic peptides corresponding to three Y. pestis-specific protein markers (murine toxine, plasminogen activator and pesticin) are monitored by targeted LC-MS/MS using the selected reaction monitoring (SRM) mode. This immuno-LC-MS/MS assay has a limit of detection of 2 × 10 4 CFU/mL in milk or tap water, and 4.5 × 10 5 CFU in 10 mg of soil.

Activation and/or recruitment of the host plasmin, a fibrinolytic enzyme also active on extracellular matrix components, is a common invasive strategy of bacterial pathogens. Yersinia pestis, the bubonic plague agent, expresses the multifunctional surface protease Pla, which activates plasmin and inactivates fibrinolysis inhibitors. Pla is encoded by the pPla plasmid. Following intradermal inoculation, Y. pestis has the capacity to multiply in and cause destruction of the lymph node (LN) draining the entry site. The closely related, pPla-negative, Y. pseudotuberculosis species lacks this capacity. We hypothesized that tissue damage and bacterial multiplication occurring in the LN during bubonic plague were linked and both driven by pPla. Using a set of pPla-positive and pPla-negative Y. pestis and Y. pseudotuberculosis strains in a mouse model of intradermal injection, we found that pPla is not required for bacterial translocation to the LN. We also observed that a pPla-cured Y. pestis caused the same extensive histological lesions as the wild type strain. Furthermore, the Y. pseudotuberculosis histological pattern, characterized by infectious foci limited by inflammatory cell infiltrates with normal tissue density and follicular organization, was unchanged after introduction of pPla. However, the presence of pPla enabled Y. pseudotuberculosis to increase its bacterial load up to that of Y. pestis. Similarly, lack of pPla strongly reduced Y. pestis titers in LNs of infected mice. This pPla-mediated enhancing effect on bacterial load was directly dependent on the proteolytic activity of Pla. Immunohistochemistry of Pla-negative Y. pestis-infected LNs revealed extensive bacterial lysis, unlike the numerous, apparently intact, microorganisms seen in wild type Y. pestis-infected preparations. Therefore, our study demonstrates that tissue destruction and bacterial survival/multiplication are dissociated in the bubo and that the primary action of Pla is to protect bacteria from destruction rather than to alter the tissue environment to favor Y. pestis propagation in the host.

Introduction: The L-Valine labeled (L-[U-(13)C,(15)N] Val) is a stable isotopic tracer administered by parenteral route within the framework of a new clinical research program concerning the brain tumor metabolism. To meet regulatory requirements and have ready to use solution with an expiration date, a pharmaceutical control of active pharmaceutical ingredient followed by stability study of hospital preparation were realised., Materials and Methods: After the pharmaceutical control of the L-[U-(13)C,(15)N] Val, the hospital preparation was prepared according to the good manufacturing preparation. Prepared bottles were stored at 5°C±3°C and 25°C±2°C for six months. The stability of the preparation was determined by physico-chemical controls (pH, osmolality, sub-visible particles, L-[U-(13)C,(15)N] Val concentration, sodium concentration, isotopic enrichment) and microbiological (bacterial endotoxin and sterility)., Results: Concentrations of L-[U-(13)C, (15)N] Val and sodium does not significantly decrease during the stability study. In parallel, no change in pH and osmolality were highlighted. Isotopic enrichment higher than 99.9% reflected the stability of labeling of L-valine molecule. The sub-visible particles, the bacterial endotoxin and sterility were in accordance with the European Pharmacopoeia attesting limpidity, apyrogenicity and sterility of this injectable preparation., Discussion and Conclusion: The stability of this hospital preparation of L-[U-(13)C, (15)N] Val has been demonstrated for six months at 5°C±3°C and 25°C±2°C, ensuring a parenteral administration as part of the clinical trial., (Copyright © 2015 Elsevier Masson SAS. All rights reserved.)

Introduction: As part of a hospital clinical research program on endoscopic curative treatment for early epithelial neoplastic lesions of the gastrointestinal tract, a new hospital sterile and non-pyrogenic preparation of fructose (5%)-glycerol (10%) was realized. Under pharmaceutical legislation, the provision of this hospital preparation involves of aseptic process validation and achieve a stability study., Materials and Methods: After the aseptic process validation with Mediafill Test, the preparation was made under aseptic conditions associated with a sterilizing filtration according to the good practices preparation. Prepared flexible bags (100mL of solution) were stored for one year in a climatic chamber (25±2°C). To assess stability, the physicochemical controls (fructose concentration, glycerol concentration, hydroxy-methyl-5 furfural [5-HMF] concentration, sodium concentration, pH measure, osmolality and sub-visible particles count) and microbiological (bioburden, bacterial endotoxin and sterility) were performed at regular intervals for one year., Results: Neither significant decrease of fructose concentration, glycerol concentration and sodium concentration nor pH, 5-HMF, osmolality variations out of specifications were observed for one year. The sub-visible particles count, the bacterial endotoxin and sterility were in accordance with the European pharmacopoeia attesting limpidity, apyrogenicity and sterility of this injectable preparation., Discussion and Conclusion: The hospital preparation was stable over one year at 25±2°C, ensuring safe administration in humans within the framework of this clinical research., (Copyright © 2014 Elsevier Masson SAS. All rights reserved.)

Introduction: The L-leucine labeled (L-[U-(13)C] Leu) is a stable isotopic tracer administered by parenteral route within the framework of a new clinical research program concerning the diagnosis of the Alzheimer's disease. To meet regulatory requirements and have ready to use solution with an expiration date, a pharmaceutical control of raw materials and the finished product followed by a stability study were realised., Materials and Method: After the pharmaceutical control of raw materials, the solution of L-[U-(13)C] Leu was prepared according to the good practices preparation. Prepared bottles were stored for 1 year of a share in a climatic chamber (25 °C±2 °C) and the other in a refrigerator (5 °C±3 °C). To assess stability, the physicochemical controls (pH, osmolality, sub-visible particles, L-[U-(13)C] Leu concentration, sodium concentration, isotopic enrichment) and microbiological (bacterial endotoxin and sterility) were performed at regular intervals for 1 year., Results: Neither significant decrease of L-[U-(13)C] Leu concentration and sodium concentration nor pH and osmolality variation were observed for 1 year. Isotopic enrichment higher than 99.9% reflected the stability of labelling of L-leucine molecule. The sub-visible particles, the bacterial endotoxin and sterility were in accordance with the European pharmacopoeia attesting limpidity, apyrogenicity and sterility of this injectable preparation., Discussion and Conclusion: The injectable preparation of L-[U-(13)C] Leu was stable after 1 year for two preservation conditions, ensuring to safety for administration for human within the framework of this clinical research., (Copyright © 2014 Elsevier Masson SAS. All rights reserved.)

Yersinia pestis is the causative agent of bubonic and pneumonic plague, an acute and often fatal disease in humans. In addition to the risk of natural exposure to plague, there is also the threat of a bioterrorist act, leading to the deliberate spread of the bacteria in the environment or food. We report here an immuno-liquid chromatography-tandem mass spectrometry (immuno-LC-MS/MS) method for the direct (i.e., without prior culture), sensitive, and specific detection of Y. pestis in such complex samples. In the first step, a bottom-up proteomics approach highlighted three relevant protein markers encoded by the Y. pestis-specific plasmids pFra (murine toxin) and pPla (plasminogen activator and pesticin). Suitable proteotypic peptides were thoroughly selected to monitor the three protein markers by targeted MS using the selected reaction monitoring (SRM) mode. Immunocapture conditions were optimized for the isolation and concentration of intact bacterial cells from complex samples. The immuno-LC-SRM assay has a limit of detection of 2 × 10(4) CFU/mL in milk or tap water, which compares well with those of state-of-the-art immunoassays. Moreover, we report the first direct detection of Y. pestis in soil, which could be extremely useful in confirming Y. pestis persistence in the ground.

The genus Yersinia contains three species pathogenic for humans, one of which is the enteropathogen Yersinia pseudotuberculosis. A recent analysis by Multi Locus Sequence Typing (MLST) of the 'Y. pseudotuberculosis complex' revealed that this complex comprises three distinct populations: the Y. pestis/Y. pseudotuberculosis group, the recently described species Yersinia similis, and a third not yet characterized population designated 'Korean Group', because most strains were isolated in Korea. The aim of this study was to perform an in depth phenotypic and genetic characterization of the three populations composing the Y. pseudotuberculosis complex (excluding Y. pestis, which belonged to the Y. pseudotuberculosis cluster in the MLST analysis). Using a set of strains representative of each group, we found that the three populations had close metabolic properties, but were nonetheless distinguishable based on D-raffinose and D-melibiose fermentation, and on pyrazinamidase activity. Moreover, high-resolution electrospray mass spectrometry highlighted protein peaks characteristic of each population. Their 16S rRNA gene sequences shared high identity (≥99.5%), but specific nucleotide signatures for each group were identified. Multi-Locus Sequence Analysis also identified three genetically closely related but distinct populations. Finally, an Average Nucleotide Identity (ANI) analysis performed after sequencing the genomes of a subset of strains of each group also showed that intragroup identity (average for each group ≥99%) was higher than intergroup diversity (94.6-97.4%). Therefore, all phenotypic and genotypic traits studied concurred with the initial MLST data indicating that the Y. pseudotuberculosis complex comprises a third and clearly distinct population of strains forming a novel Yersinia species that we propose to designate Yersinia wautersii sp. nov. The isolation of some strains from humans, the detection of virulence genes (on the pYV and pVM82 plasmids, or encoding the superantigen ypmA) in some isolates, and the absence of pyrazinamidase activity (a hallmark of pathogenicity in the genus Yersinia) argue for the pathogenic potential of Y. wautersii., (Copyright © 2014 Elsevier GmbH. All rights reserved.)

Yersinia pestis, the plague bacillus, has a rodent-flea-rodent life cycle but can also persist in the environment for various periods of time. There is now a convenient and effective test (F1-dipstick) for the rapid identification of Y. pestis from human patient or rodent samples, but this test cannot be applied to environmental or flea materials because the F1 capsule is mostly produced at 37°C. The plasminogen activator (PLA), a key virulence factor encoded by a Y. pestis-specific plasmid, is synthesized both at 20°C and 37°C, making it a good candidate antigen for environmental detection of Y. pestis by immunological methods. A recombinant PLA protein from Y. pestis synthesized by an Escherichia coli strain was used to produce monoclonal antibodies (mAbs). PLA-specific mAbs devoid of cross-reactions with other homologous proteins were further cloned. A pair of mAbs was selected based on its specificity, sensitivity, comprehensiveness, and ability to react with Y. pestis strains grown at different temperatures. These antibodies were used to develop a highly sensitive one-step PLA-enzyme immunoassay (PLA-EIA) and an immunostrip (PLA-dipstick), usable as a rapid test under field conditions. These two PLA-immunometric tests could be valuable, in addition to the F1-disptick, to confirm human plague diagnosis in non-endemic areas (WHO standard case definition). They have the supplementary advantage of allowing a rapid and easy detection of Y. pestis in environmental and flea samples, and would therefore be of great value for surveillance and epidemiological investigations of plague foci. Finally, they will be able to detect natural or genetically engineered F1-negative Y. pestis strains in human patients and environmental samples.

Yersinia pestis dissemination in a host is usually studied by enumerating bacteria in the tissues of animals sacrificed at different times. This laborious methodology gives only snapshots of the infection, as the infectious process is not synchronized. In this work we used in vivo bioluminescence imaging (BLI) to follow Y. pestis dissemination during bubonic plague. We first demonstrated that Y. pestis CO92 transformed with pGEN-luxCDABE stably emitted bioluminescence in vitro and in vivo, while retaining full virulence. The light produced from live animals allowed to delineate the infected organs and correlated with bacterial loads, thus validating the BLI tool. We then showed that the first step of the infectious process is a bacterial multiplication at the injection site (linea alba), followed by a colonization of the draining inguinal lymph node(s), and subsequently of the ipsilateral axillary lymph node through a direct connection between the two nodes. A mild bacteremia and an effective filtering of the blood stream by the liver and spleen probably accounted for the early bacterial blood clearance and the simultaneous development of bacterial foci within these organs. The saturation of the filtering capacity of the spleen and liver subsequently led to terminal septicemia. Our results also indicate that secondary lymphoid tissues are the main targets of Y. pestis multiplication and that colonization of other organs occurs essentially at the terminal phase of the disease. Finally, our analysis reveals that the high variability in the kinetics of infection is attributable to the time the bacteria remain confined at the injection site. However, once Y. pestis has reached the draining lymph nodes, the disease progresses extremely rapidly, leading to the invasion of the entire body within two days and to death of the animals. This highlights the extraordinary capacity of Y. pestis to annihilate the host innate immune response.

YpfΦ is a filamentous phage that infected Yersinia pestis, the plague bacillus, during its emergence. Using an experimental transduction approach, we show here that this phage has the capacity to infect with variable efficiencies, all three pathogenic Yersinia species as well as Escherichia coli. Like other Inovirus phages, its genetic organization comprises three functional modules necessary for the production of infectious virions. Upon infection, YpfΦ integrates into the chromosomal dif site, but extrachromosomal forms are also frequently observed. Several pieces of evidence suggest that the absence of chromosomal YpfΦ in natural non-Orientalis Y. pestis isolates results from a higher chromosomal excision rate rather than from a defective integration machinery. A resident YpfΦ confers some protection against a superinfection. In contrast to other filamentous phages, the incoming YpfΦ genome inserts itself between two copies of the resident prophage. This analysis thus unravels infective properties specific to YpfΦ., (Copyright © 2010 Elsevier Inc. All rights reserved.)

According to World Health Organization (WHO), the global registered prevalence of leprosy at the beginning of 2006 stood at 219,826 cases. Pockets of high endemicity still remain in some areas of Africa, India, and Brazil. One of the joint manifestations of leprosy are the signs of Charcot's disease. Charcot's disease of leprosy advanced in spite of the treatment. The different clinical types are sometimes a problem in diagnosis. We report herein two cases.