Search

Extracellular matrix (ECM) proteins are key mediators of cell/material interactions. The surface density and conformation of these proteins adsorbed on the material surface influence cell adhesion and the cellular response. We have previously shown that subtle variations in surface chemistry lead to drastic changes in the conformation of adsorbed fibronectin (FN). On poly(ethyl acrylate) (PEA), FN unfolds and displays domains for cell adhesion and FN-FN interaction, whereas on poly(methyl acrylate) (PMA) – with only one methyl group less – FN remains globular as it is in solution. The effect of the strength of the protein/material interaction in cell response, and its relation to protein density and conformation, has received limited attention so far. In this work, we used FN-functionalized AFM cantilevers to evaluate, via force spectroscopy, the strength of interaction between fibronectin and the underlying polymer which controls FN conformation (PEA and PMA). We found that the strength of FN/PEA interaction is significantly higher than FN/PMA, which limits the mobility of FN layer on PEA, reduces the ability of cells to mechanically reorganize FN and then leads to enhanced proteolysis and degradation of the surrounding matrix with compromised cell viability. By contrast, both PEA and PMA support cell adhesion when FN density is increased and also in the presence of serum or other serum proteins, including vitronectin (VN) and bovine serum albumin (BSA), which provide a higher degree of mobility to the matrix. Statement of Significance The identification of parameters influencing cell response is of paramount importance for the design of biomaterials that will act as synthetic scaffolds for cells to anchor, grow and, eventually, become specialised tissues. Cells interact with materials through an intermediate layer of proteins adsorbed on the material surface. It is known that the density and conformation of these proteins determine cell behaviour. Here we show that the strength of protein/material interactions, which has received very limited attention so far, is key to understand the cellular response to biomaterials. Very strong protein/material interactions reduce the ability of cells to mechanically reorganize proteins at the material interface which results in enhanced matrix degradation, leading ultimately to compromised cell viability. [ABSTRACT FROM AUTHOR]

In this study, it was aimed to investigate the combinatory effect of biophysical and biochemical factors on human dental pulp stem cells’ (hDPSCs) behavior. For this purpose, well-defined nanotopography of nanowells with two different pitch size of 109 nm and 341 nm were prepared on polyhydroxymethylsiloxane (PHMS) by using colloidal particles nanofabrication. The nanopatterned PHMS surfaces (PHMS/109 and PHMS/341) were subsequently used for fibronectin (Fn) adsorption. With this approach, nanotopographical details were combined with biochemical signals from Fn. Depending upon the size of cavities created by the nanowells, Fn molecules followed a site-selective adsorption. While they adsorbed both inside and outside the nanowells of PHMS/341, they preferred to adsorb outside the cavities of PHMS/109 surfaces. Human dental pulp stem cells were cultured on nanopatterned PHMS with or without Fn adsorption in the presence and absence of serum. Scanning electron microscopy and fluorescence microscopy analyses showed the interaction of cells was dependent on nanotopography size especially in serum-free medium. Furthermore, hDPSCs’ morphology and cytoskeletal organization changed in correlation with preferential Fn adsorption. On Fn adsorbed PHMS/109 surfaces, cells displayed stretched bundles whereas, they showed extensive spreading and followed the Fn adsorbed sites inside the cavities of PHMS/341 surfaces. The observed effects are interpreted in terms of the preferential exposure of different Fn epitopes occurring on PHMS/109 and PHMS/341 as a consequence of the different hydrophilic/hydrophobic adsorbing surface. [ABSTRACT FROM AUTHOR]

Semiconductors are important materials used for the development of high-performance biomedical devices. Gallium nitride (GaN) is a well-known III-nitride semiconductor with excellent optoelectronic properties as well as high chemical stability and biocompatibility. The formation of tight interfaces between GaN substrates and cells would be crucial for GaN-based devices used for probing and manipulating biological processes of cells. Here we report a strategy to greatly enhance cell adhesion and survival on nanotextured GaN surface which was treated by UV illumination and fibronectin (FN) adsorption. Cell studies showed that the UV/FN treatment greatly enhanced cell adhesion and growth on nanotextured GaN surfaces. These observations suggest new opportunities for novel nanotextured GaN-based biomedical devices. [ABSTRACT FROM AUTHOR]

Background Considerable research is focusing on the surface modification of titanium implants for the treatment of orthopaedic tissue injuries to increase the success of orthopaedic fixations. Chitosan is one of the natural materials under investigation based on several favourable properties. Numerous techniques have been described for the preparation of chitosan membranes, including solution casting methods for the investigation of bioactivity before applying coatings onto potential titanium implants. Solution casting enables the easy in-house evaluation of chitosan membranes and allows for the selection of promising chitosan materials. Results We present a method for the standardized and easily applied preparation of chitosan membranes by solution casting. This protocol is suitable for chitosan materials spanning a wide degree of deacetylation, being derived from different chitin sources and chitosan derivatives with novel properties. We detail the preparation and quality control methods in order to prepare membranes with favourable bioactivity, sustaining cell attachment and proliferation for extended culture periods Conclusions The possibilities associated with the use of chitosan in tissue engineering applications are far from being exhausted and numerous challenges remain prior to successful translation into the clinics. Based on our experience, we have developed simple in-house methods for quality control of homogeneous membrane casting and early prediction of successful experimental outcome. [ABSTRACT FROM AUTHOR]

Protein-surface interaction may determine the success or failure of an implanted device. Not much attention have been paid to the specific surface parametes of hydroxyapatite (OHAp) that modulates and determines the formation and potential activity of the layer of proteins that is first formed when the material get in contact with the host tissue. the influence of specific surface area (SSA), crystallite size (CS) and particle size (PS) of OHAp on the adsorption of proteins relevant for bone regeneration is evaluated in this article. OHAp have been prepared by a wet chemical reaction of Ca(OH)2 with H3PO4. One set of reactions included poly acrylic acid in the reactant solution to modify the properties of the powder. Fibrinogen (Fg) Fraction I, type I: from Human plasma, (67% Protein), and Fibronectin (Fn) from Human plasma were selected to perform the adsorption experiments. The analysis of protein adsorption was carried out by UV/Vis spectrometry. A lower SSA and a different aspect ratio are obtained when the acrylic acid is included in the reaction badge. The deconvolution of the amide I band on the Raman spectra of free and adsorbed proteins reveals that the interaction apatite-protein happens through the carboxylate groups of the proteins. The combined analysis of CS, SSA and PS should be considered on the design of OHAp materials intended to interact with proteins. © 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2013. [ABSTRACT FROM AUTHOR]

The aim of this paper is to quantify the adhered fibronectin (FN; by adsorption and/or grafting) and the exposure of its cell adhesive motifs (RGD and FNIII7-10) on poly(ethyl acrylate) (PEA) copolymers whose chemical composition has been designed to increase wettability and to introduce acid functional groups. FN was adsorbed to PEA, poly(ethyl acrylate- co-hydroxyethyl acrylate), poly(ethyl acrylate- co-acrylic acid), and poly(ethyl acrylate- co-methacrylic acid) copolymers, and covalently cross-linked to poly(ethyl acrylate- co-acrylic acid) and poly(ethyl acrylate- co-methacrylic acid) copolymers. Amount of adhered FN and exhibition of RGD and FNIII7-10 fragments involved in cell adhesion were quantified with enzyme-linked immunosorbent assay tests. Even copolymers with a lower content of the hydrophilic component showed a decrease in water contact angle. In addition, FN was successfully fixed on all surfaces, especially on the hydrophobic surfaces. However, it was demonstrated that exposure of its cell adhesion sequences, which is the key factor in cell adhesion and proliferation, was higher for hydrophilic surfaces. © 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2013. [ABSTRACT FROM AUTHOR]

The in vitro generation of a three-dimensional (3-D) myocardial tissue-like construct employing cells, biomaterials, and biomolecules is a promising strategy in cardiac tissue regeneration, drug testing, and tissue engineering applications. Despite significant progress in this field, current cardiac tissue models are not yet able to stably maintain functional characteristics of cardiomyocytes for long-term culture and therapeutic purposes. The objective of this study was to fabricate bioactive 3-D chitosan nanofiber scaffolds using an electrospinning technique and exploring its potential for long-term cardiac function in the 3-D co-culture model. Chitosan is a natural polysaccharide biomaterial that is biocompatible, biodegradable, non-toxic, and cost effective. Electrospun chitosan was utilized to provide structural scaffolding characterized by scale and architectural resemblance to the extracellular matrix (ECM) in vivo. The chitosan fibers were coated with fibronectin via adsorption in order to enhance cellular adhesion to the fibers and migration into the interfibrous milieu. Ventricular cardiomyocytes were harvested from neonatal rats and studied in various culture conditions (i.e., mono- and co-cultures) for their viability and function. Cellular morphology and functionality were examined using immunofluorescent staining for alpha-sarcomeric actin (SM-actin) and gap junction protein, Connexin-43 (Cx43). Scanning electron microscopy (SEM) and light microscopy were used to investigate cellular morphology, spatial organization, and contractions. Calcium indicator was used to monitor calcium ion flux of beating cardiomyocytes. The results demonstrate that the chitosan nanofibers retained their cylindrical morphology in long-term cell cultures and exhibited good cellular attachment and spreading in the presence of adhesion molecule, fibronectin. Cardiomyocyte mono-cultures resulted in loss of cardiomyocyte polarity and islands of non-coherent contractions. However, the cardiomyocyte-fibroblast co-cultures resulted in polarized cardiomyocyte morphology and retained their morphology and function for long-term culture. The Cx43 expression in the fibroblast co-culture was higher than the cardiomyocytes mono-culture and endothelial cells co-culture. In addition, fibroblast co-cultures demonstrated synchronized contractions involving large tissue-like cellular networks. To our knowledge, this is the first attempt to test chitosan nanofiber scaffolds as a 3-D cardiac co-culture model. Our results demonstrate that chitosan nanofibers can serve as a potential scaffold that can retain cardiac structure and function. These studies will provide useful information to develop a strategy that allows us to generate engineered 3-D cardiac tissue constructs using biocompatible and biodegradable chitosan nanofiber scaffolds for many tissue engineering applications. Biotechnol. Bioeng. 2013; 110: 637-647. © 2012 Wiley Periodicals, Inc. [ABSTRACT FROM AUTHOR]

Abstract: The characteristic topographical features (crystallite dimensions, surface morphology and roughness) of bioceramics may influence the adsorption of proteins relevant to bone regeneration. This work aims at analyzing the influence of two distinct nanophased hydroxyapatite (HA) ceramics, HA725 and HA1000 on fibronectin (FN) and osteonectin (ON) adsorption and MC3T3-E1 osteoblast adhesion and morphology. Both substrates were obtained using the same hydroxyapatite nanocrystals aggregates and applying the sintering temperatures of 725°C and 1000°C, respectively. The two proteins used in this work, FN as an adhesive glycoprotein and ON as a counter-adhesive protein, are known to be involved in the early stages of osteogenesis (cell adhesion, mobility and proliferation). The properties of the nanoHA substrates had an important role in the adsorption behavior of the two studied proteins and clearly affected the MC3T3-E1 morphology, distribution and metabolic activity. HA1000 surfaces presenting slightly larger grain size, higher root-mean-square roughness (Rq), lower surface area and porosity, allowed for higher amounts of both proteins adsorbed. These substrates also revealed increased number of exposed FN cell-binding domains as well as higher affinity for osteonectin. Regarding the osteoblast adhesion results, improved viability and cell number were found for HA1000 surfaces as compared to HA725 ones, independently of the presence or type of adsorbed protein. Therefore the osteoblast adhesion and metabolic activity seemed to be more sensitive to surfaces morphology and roughness than to the type of adsorbed proteins. [ABSTRACT FROM AUTHOR]

Abstract: Wettability of biomaterials surfaces and protein-coated substrates is generally characterized with the sessile drop technique using polar and apolar liquids. This procedure is often performed in air, which does not reflect the physiological conditions. In this study, liquid/liquid contact angle measurements were carried out to be closer to cell culture conditions. This technique allowed us to evaluate the polar contribution to the work of adhesion between an aqueous medium and four selected biomaterials widely used in tissue culture applications: bacteriological grade polystyrene (PS), tissue culture polystyrene (tPS), poly(2-hydroxyethyl methacrylate) film (PolyHEMA), and hydroxypropylmethylcellulose-carboxymethylcellulose bi-layered Petri dish (CEL). The contributions of polar interactions were also estimated on the same biomaterials after fibronectin (Fn) adsorption. The quantity of Fn adsorbed on PS, tPS, PolyHEMA and CEL surfaces was evaluated by using the fluorescein-labeled protein. PolyHEMA and CEL were found to be hydrophilic, tPS was moderately hydrophilic and PS was highly hydrophobic. After Fn adsorption on PS and tPS, a significant increase of the surface polar interaction was observed. On PolyHEMA and CEL, no significant adsorption of Fn was detected and the polar interactions remained unchanged. Finally, an inverse correlation between the polarity of the surfaces and the quantity of adsorbed Fn was established. [Copyright &y& Elsevier]

Abstract: The influence of coating polystyrene tissue culture plates with different proteins on murine hybridoma cell growth and antibody production was investigated. Fibronectin, collagen I, bovine serum albumin and laminin were used to coat NUNC® and COSTAR® cell culture plates. Cell number and antibody concentration in culture fluids were quantified as indicators for cell viability, proliferation and productivity. Adhesive behaviour, morphology, expression of surface receptors of hybridoma cells and the presence of tyrosine-phosphorylated proteins in cell lysates were characterized by cell adhesion experiments, microscopy, flow cytometry and Western Blot analysis. It was shown that coatings with fibronectin (0.2μg/ml) lead to a substantial improvement of cell growth by 50–70% and an increase of monoclonal antibody production by 100–120%. Collagen I coatings showed an improvement in cell growth by 30–70% and by 60% for the production of monoclonal antibodies. Coatings with BSA and laminin had minor effects on these parameters. It was found that the hybridoma cell lines used in this study did not express the α2-chain of the α2β1-integrin, which is responsible for binding to collagen and laminin. However, the presence of β1-integrin on the cell surface was shown, which should enable hybridoma cells to bind fibronectin. We propose, therefore, that fibronectin adsorption to cell culture materials may be a promising approach to enhance the production of monoclonal antibodies by cultivated hybridoma cells. [Copyright &y& Elsevier]

The objective of this study was to investigate the adsorption of fibronectin on titanium (Ti) surfaces and the effect of pre-adsorbed fibronectin on osteoblast precursor cell attachment in vitro. Two different concentrations of bovine fibronectin were used in this study. Protein adsorption on Ti surfaces was analyzed using the micro bicinchoninic acid (BCA) protein assay. Cell concentration on Ti and fibronectin pre-adsorbed Ti surfaces after 3 h incubation was analyzed using the Vybrant™ cell adhesion assay. Cell morphology on Ti and fibronectin pre-adsorbed Ti surfaces was observed using scanning electron microscopy (SEM). After 180 min incubation, maximum adsorption of bovine fibronectin on Ti surfaces was observed. Fibronectin adsorption on Ti surfaces was observed to be significantly dependent on the initial concentration and the amount of incubation time. In the presence of 1 mg/ml fibronectin pre-adsorbed on Ti surfaces after 15 min, osteoblast precursor cell attachment on Ti surfaces was observed to be enhanced compared with control Ti surfaces, Ti surfaces pre-adsorbed with 1 mg/ml fibronectin for 180 min, and Ti surfaces pre-adsorbed with 0.1 mg/ml fibronectin for 15 and 180 min. No significant difference in cell attachment was observed between control Ti surfaces, Ti surfaces pre-adsorbed with fibronectin for 180 min, and Ti surfaces pre-adsorbed with 0.1 mg/ml fibronectin for 15 and 180 min. In addition, no differences in cell morphology of the attached osteoblast precursor cells on control Ti surfaces and Ti surfaces pre-adsorbed with fibronectin were observed in this study. It was concluded that an optimum concentration of adsorbed fibronectin on Ti surfaces plays an important role in governing cell attachment. [Copyright &y& Elsevier]

Advanced technologies for controlled cell adhesion and detachment in novel biointerface designs profit from stimuli-responsive systems that are able to react to their environment. Here, a multilayer system made of thiolated chitosan and thiolated chondroitin sulfate was constructed, with the potential of switchable inter- and intramolecular thiol/disulfide interactions representing a redox-sensitive nanoplatform. Owing to the formation and cleavage of inherent disulfide bonds by oxidation and reduction, surface properties of the multilayer can be controlled toward protein adsorption/desorption and cell adhesion in a reversible manner. Oxidation of thiols by chloramine-T promotes fibronectin (FN) adsorption and fibroblast cell adhesion, whereas the reduction by tris(2-carboxyethyl)phosphine reverses these effects, leading to low FN adsorption and little cell adhesion and spreading. These effects on the biological systems are related to significant changes of wetting properties, zeta potential, and mechanical properties of these multilayer films. The system presented may be useful for biomedical applications as responsive and obedient surfaces in medical implants and support tissue regeneration.

Control of the biomaterial properties through stimuli-responsive polymeric platforms has become an essential technique in recent biomedical applications. A multilayer system of thiolated chitosan (t-Chi) and thiolated chondroitin sulfate (t-CS), consisting of five double layers ([t-Chi/t-CS] 5 ), was fabricated here by applying a layer-by-layer coating strategy. To represent a novel class of chemically tunable nanostructures, the ability to cross-link pendant thiol groups was tested by a rise from pH 4 during layer formation to pH 9.3 and a more powerful chemical stimulus by using chloramine-T (ChT). Following both treatments, the resulting multilayers showed stimuli-dependent behavior, as demonstrated by their content of free thiols, wettability, surface charge, elastic modulus, roughness, topography, thickness, and binding of fibronectin. Studies with human dermal fibroblasts further demonstrated the favorable potential of the ChT-responsive multilayers as a cell-adhesive surface compared to pH-induced cross-linking. Because the [t-Chi/t-CS] 5 multilayer system is responsive to stimuli such as the pH and redox environment, multilayer systems with disulfide bond formation may help to tailor their interaction with cells, film degradation, and controlled release of bioactive substances like growth factors in a stimuli-responsive manner useful in future wound healing and tissue engineering applications.

Glycosaminoglycans (GAGs) chondroitin sulfate, heparin, hyaluronan, and sulfated hyaluronan are lower and higher thiolated to enable a one-step covalent modification of gold or vinyl-terminated surfaces. Measurements of water contact angle and zeta potentials reveal that sulfated GAG-modified surfaces are more wettable and possess a negative surface potential. Additionally, higher thiolated GAGs (tGAGs) exhibit increased wettability and higher surface roughness. Fibronectin (FN) adsorption increases with sulfation degree of tGAGs. The tGAG-functionalized surfaces with higher degree of sulfation promote fibroblast adhesion most under serum-free conditions. The preadsorption of FN allows for more cell adhesion on tGAG surfaces. Metabolic activity measurements show that cell growth is enhanced for tGAGs up to a certain thiolation degree. Overall, thiolation of GAGs does not hamper their bioactivity toward proteins and cells, which make them highly interesting for biomimetic surface modification of implants and tissue engineering scaffolds., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Adhesion and motility of cells on polyethylene glycol (PEG) engineered surfaces are of fundamental interest for the development of biotechnological devices. Here, the structure of PEG block copolymers physisorbed to surfaces by polyLlysine (PLL) or polypropylene oxide (PPO) is studied. Cell behavior on such surfaces incubated with fibronectin (FN) is analyzed via time-lapse microscopy, the amount and the location of FN is determined via neutron reflectivity. While FN does not adsorb onto PPOPEG, 0.4-0.7 mg m(-2) of FN is found in the vicinity of the PLL moiety of PLLPEG. Cells exhibit 21% increased motility on PLLPEG (5 kDa PEG chains) compared to pure FN layers, and 12% decreased motility for PLLPEG (2 kDa PEG chains). These findings suggest that by design of PEGylated surfaces cell migration can be controlled., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)