Search

Fiber optic sensors (FOSs) have transformed industrial applications with their high sensitivity and precision, especially in real-time monitoring. This study presents a fiber optic sensor based on multimodal interference (MMI) applied to detect honey adulteration. The sensor is built using a non-core multimode fiber (NC-MMF) segment spliced between two standard single-mode fibers (SMFs). We focus on reporting the detection of two main adulterants in honey that modify its refractive index (RI): the presence of glucose and moisture content. Detailed testing was performed with two commercially approved honey brands, named A and B. The sensor successfully detected glucose concentrations from 1% to 5% and moisture content from 0% to 20% for both brands. For glucose detection, we obtained sensitivity values −0.55457 nm/% for brand A and −2.61257 nm/% for brand B. In terms of moisture content in honey, we observed a sensitivity around −0.3154 nm/% and −0.3394 nm/% for brands A and B, respectively. Additionally, temperature tests were performed, showing that the sensor works optimally up to 30 °C. The results were validated using a conventional refractometer, showing a close agreement with the data obtained and confirming the reliability and accuracy of the proposed sensor. Compared to other refractometers, the MMI sensor offers advantages such as real-time monitoring, ease of assembly, cost-effectiveness, and minimal maintenance. Furthermore, the sensor represents an alternative tool to guarantee the quality and authenticity of honey, overcoming the limitations of conventional measurement techniques. [ABSTRACT FROM AUTHOR]

The application of distributed fiber optic strain and temperature measurement can be utilized to address a multitude of measurement tasks across a diverse range of fields, particularly in the context of structural health monitoring in the domains of building construction, civil engineering, and special foundation engineering. However, a comprehensive understanding of the influences on the measurement method and the sensors is essential to prevent misinterpretations or measurement deviations. In this context, this study investigated the effects of moisture exposure, including various salt solutions and a high pH value, on a distributed strain measurement using Rayleigh backscattering. Three fiber optic sensors with different coating materials and one uncoated fiber were exposed to five different solutions for 24 h. The study revealed significant discrepancies (∼38%) in deformation between the three coating types depending on the surrounding solution. Furthermore, in contrast to the prevailing literature, which predominantly describes swelling effects, a negative deformation (∼−47 μ ε ) was observed in a magnesium chloride solution. The findings of this study indicate that corresponding effects can impact the precision of measurement, potentially leading to misinterpretations. Conversely, these effects could be used to conduct large-scale monitoring of chemical components using distributed fiber optic sensing. [ABSTRACT FROM AUTHOR]

Since light propagation in a multimode fiber (MMF) exhibits visually random and complex scattering patterns due to external interference, this study numerically models temperature and curvature through the finite element method in order to understand the complex interactions between the inputs and outputs of an optical fiber under conditions of temperature and curvature interference. The systematic analysis of the fiber's refractive index and bending loss characteristics determined its critical bending radius to be 15 mm. The temperature speckle atlas is plotted to reflect varying bending radii. An optimal end-to-end residual neural network model capable of automatically extracting highly similar scattering features is proposed and validated for the purpose of identifying temperature and curvature scattering maps of MMFs. The viability of the proposed scheme is tested through numerical simulations and experiments, the results of which demonstrate the effectiveness and robustness of the optimized network model. [ABSTRACT FROM AUTHOR]

Self-compacting concrete (SCC) is the most flowable concrete type that exerts high pressure on formwork. SCC is the most commonly used concrete globally for construction applications due to its cost-effectiveness. However, to make a formwork resist the exerted lateral pressure of SCC, it is required to have a suitable design for formwork. This paper presents a novel approach on how could create and prepare the Fiber Bragg Grating (FBG) optics using as a sensor to measure lateral pressure and temperature of SCC. To ensure the FBG sensor works properly a validated methodology is conducted. In the first stage, FBG sensors are calibrated with temperature sensitivity and then are calibrated with water pressure. The latter calibration is used to verify lateral pressure with SCC. However, this is not the only sensor used to record the result, a genuine sensor such as a transducer sensor has been positioned close to the FBG sensor to validate the results of the FBG sensor. The created FBG sensor demonstrates highly promising results, effectively validating the outcomes of the transducer sensor, while also reducing costs and enhancing usability for construction applications. [ABSTRACT FROM AUTHOR]

Coastal concrete structures, such as cross-sea bridges and tunnels, are susceptible to the penetration of chloride ions, which can lead to the deterioration of the passive film on the rebar surface, consequently accelerating the corrosion process. Conventional methods for monitoring chloride ions typically require in situ drilling for sample collection, thereby compromising efficiency and accuracy. Additionally, real-time monitoring and early warning cannot be achieved. To address these challenges, this work introduces a fluorescent-probe-based fiber optic sensor for monitoring chloride levels in concrete structures. Quinine sulfate was chosen as the fluorescent material due to its exceptional sensitivity to chloride ions and its stability in concrete environments. The proposed sensor was manufactured using sol–gel and 3D-printing techniques. Tests were conducted using concrete simulation fluid and cement mortar specimens. The results demonstrate that the sensitivity of the proposed sensor is greater than 0.01 M, and its accuracy in penetration depth measurement is better than 3 mm. The findings confirm that the designed fiber optic sensor based on quinine sulfate enables real-time monitoring of chloride ions in concrete structures, offering high sensitivity (0.1% in concentration and 2.7 mm in terms of penetration depth), unique selectivity (as it is immune to other ions whose concentrations are 10 times higher than those of Cl−), and a compact size (10 × 20 mm). These attributes render it promising for practical engineering applications. [ABSTRACT FROM AUTHOR]

In the paper, a new method of phase measurement error suppression in a phase-sensitive optical time domain reflectometer is proposed and experimentally proved. The main causes of phase measurement errors are identified and considered, such as the influence of the recording interferometer instabilities and laser wavelength instability, which can cause inaccuracies in phase unwrapping. The use of a Mach–Zender interferometer made by 3 × 3 fiber couplers is proposed and tested to provide insensitivity to the recording interferometer and laser source instabilities. It is shown that using all three available photodetectors of the interferometer, instead of just one pair, achieves significantly better accuracy in the phase unwrapping. A novel compensation scheme for accurate phase measurements in a phase-sensitive optical time domain reflectometer is proposed, and a comparison of the measurement signals with or without such compensation is shown and discussed. The proposed method, using three photodetectors, allows for very good compensation of the phase measurement errors arising from common-mode noise from the interferometer and laser source, providing a significant improvement in signal detection. In addition, the method allows the tracking of slow temperature changes in the monitored fiber/object, which is not obtainable when using a simple low-pass filter for phase unwrapping error reduction, as is customary in several systems of this kind. [ABSTRACT FROM AUTHOR]

A novel application of fiber optic sensing aimed at understanding the tensile behavior of post‐installed reinforcing bars in normal‐strength concrete is presented in this paper. To comply with established assumptions of cast‐in reinforcement, such as the uniform bond stress distribution, the design bond strength of post‐installed configurations is limited. In this study, pull‐out tests in confined conditions were conducted using two high‐performance mortars. Cast‐in‐place anchorages were tested for reference. The proposed fiber optic sensors and post‐processing techniques enable to continually measure and evaluate the bond stress distribution and monitor rebar deformation. Compared to cast‐in rebars, post‐installed rebars exhibit significantly higher bond resistance, particularly due to higher bond stresses at the beginning of the embedment length. These results highlight the potential for reducing the embedment length of post‐installed rebar. Moreover, variations in stiffness and bond stress distribution are found to significantly affect the slip and rebar deformation of both cast‐in‐place and post‐installed rebar. [ABSTRACT FROM AUTHOR]

AbstractWe investigate refractive index (RI) sensors using no-core fibers with diameters of 250 µm, 125 µm, and 62.5 µm. Experiments show that RI sensors with sizes of 62.5 µm and 250 µm are more sensitive than those with a diameter of 125 µm. The maximum RI sensitivity was 4886 nm/RIU. The RI sensor has a high sensitivity, a wide measurement range, and is insensitive to temperature, making it well-suited for a variety of practical applications. [ABSTRACT FROM AUTHOR]

A novel two‐parameter sensor is proposed based on the abrupt taper and micro‐arc Michelson interferometer (MI) in single‐mode fiber. When there is a regular change in the liquid level or temperature, the phase difference changes, and the spectral intensity or wavelength of the interfering valleys of this sensor is directionally shifted. This study enriches the construction of MI and provides a new perspective on liquid level measurement. We experimentally explored the sensor's sensing performance over temperature and liquid level: this sensor's temperature sensitivity and liquid level sensitivity were up to 62.9 pm/°C and 0.2896 dB/mm, respectively. In addition, this sensor is characterized by compactness, simplicity, low cost, and high reliability, and it is suitable for measurement of liquid level and temperature, expanding the application field of MI. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Chongqing University of Technology (Natural Science) is the property of Chongqing University of Technology and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This paper details the comprehensive activities conducted in a laboratory setting to assess the structural health monitoring (SHM) of prefabricated building envelopes. Integrating sensors into building components like curtain wall facades poses challenges but offers opportunities for monitoring structural health, requiring compliance with regulatory standards. The research investigates the possibility of defining a kit of conventional and multi-parameter sensors integrated within the building envelope to monitor its behavior during the performance test conducted. The kit of sensors also includes Fiber Optic Sensors for effectively monitoring building envelope behavior and structural integrity. In this context, the European project InComEss (H2020-GA862597) aims to define a stand-alone solution for SHM using Piezoelectric Energy Harvesting Systems (PE-EHS) for façade monitoring through FBG/FOS system. After analyzing the main façade structural stress, a series of FBGs, accelerometers, and force washers were integrated within a 1:1 scale façade prototype and tested in a laboratory following the test sequence parameters required by the curtain wall standard EN 13830. The data collected were analyzed with the aim of monitoring the façade behavior before and after the tests. The results show that the façade's performance passed the assessing test criteria without reporting any damages. In addition, the outcomes demonstrated the effectiveness of the defined kit of multi-parameter sensors for the building envelope's SHM. [ABSTRACT FROM AUTHOR]

A tunable fiber optic (FO) long‐range surface plasmon (LRSP) sensor with strong coupling is developed and demonstrated theoretically in this article. The sensor consists of a square lattice array of Ag nanodisks resting on the FO end face. Utilizing nanodisks with small diameters leads to the pronounced excitation of two distinct and independent resonant modes: surface plasmon polaritons (SPP) and LRSP. A systematic investigation is performed to evaluate the sensing performance and capabilities of the sensor, focusing on its bulk and surface sensitivity. Significantly, the LRSP mode demonstrates high sensitivity and favorable linearity in response to refractive index (RI) changes, with an exceptionally high figure of merit (FOM). On the contrary, the SPP mode is regarded as an ideal self‐referencing mode due to its immunity to RI fluctuations. The enlargement of nanodisks diameters results in a swift redshift in the LRSP wavelength, leading to a strong coupling with the SPP mode. This coupling facilitates the transfer of electric fields within the SPP mode, promotes sensing capabilities, and enables the realization of dual‐channel sensing functionality. The occurrence of strong coupling phenomena along with the use of FO substrates provides an innovative option for achieving multifunctionality and miniaturization in sensor platforms. [ABSTRACT FROM AUTHOR]

The choice of wavelet decomposition layer (DL) not only affects the denoising quality of wavelet denoising (WD), but also limits the denoising efficiency, especially when dealing with real phase-sensitive optical time-domain reflectometry (φ -OTDR) signals with complex signal characteristics and different noise distributions. In this paper, a straightforward adaptive DL selection method is introduced, which dose not require known noise and clean signals, but relies on the similarity between the probability density function (PDF) of method noise (MN) and the PDF of Gaussian white noise. Validation is carried out using hypothetical noise signals and measured φ -OTDR vibration signals by comparison with conventional metrics, such as peak signal-to-noise ratio (PSNR) and structural similarity (SSIM). The proposed wavelet DL selection method contributes to the fast processing of distributed fiber optic sensing signals and further improves the system performance. [ABSTRACT FROM AUTHOR]

This study proposes a method for interferometric fiber optic sensor readouts. The method utilizes the advantages of the active homodyne demodulation technique and low-coherence interferometry. The usage of the tandem low-coherence interferometer enables modulating the reference interferometer without any changes to the sensor. This achieves high sensitivity, high stability, and a wide frequency band. A sensitivity of up to 0.1 nm (RMS) in the frequency range of 5 kHz is demonstrated by detecting acoustic signals with a fiber Michelson interferometer as a sensor. [ABSTRACT FROM AUTHOR]

The results of an experimental study of the operation of fiber optic sensors (FOS) of acoustic emission introduced into the structure of polymer composite materials (PCM) are presented. The reliability and fault tolerance of FOS under critical mechanical loads on PCM was assessed, and the influence of the presence of FOS embedded into the structure of PCM on the mechanical characteristics of the material was investigated. For demodulation of FOS output signals, the principles of adaptive holographic interferometry based on two-wave mixing at dynamic hologram formed in a photorefractive crystal are used. [ABSTRACT FROM AUTHOR]

The article presents the physical properties and principle of operation of a fiber-optic sensor based on a Bragg grating and analyzes its indicators. Schemes of a fiber-optic sensor are proposed depending on the purpose of the optical fiber in the sensor. The expediency of using a distributed fiber-optic sensor to control the operational and structural parameters of overhead power lines is substantiated by analyzing the sensitivity indicators of the Breggir grid to the temperature ranges of the wires and mechanical force, as well as the need to take into account during the design of equipping the lines with monitoring systems with a fiber-optic sensor. [ABSTRACT FROM AUTHOR]

Fiber optic sensors (FOSs) have transformed industrial applications with their high sensitivity and precision, especially in real-time monitoring. This study presents a fiber optic sensor based on multimodal interference (MMI) applied to detect honey adulteration. The sensor is built using a non-core multimode fiber (NC-MMF) segment spliced between two standard single-mode fibers (SMFs). We focus on reporting the detection of two main adulterants in honey that modify its refractive index (RI): the presence of glucose and moisture content. Detailed testing was performed with two commercially approved honey brands, named A and B. The sensor successfully detected glucose concentrations from 1% to 5% and moisture content from 0% to 20% for both brands. For glucose detection, we obtained sensitivity values −0.55457 nm/% for brand A and −2.61257 nm/% for brand B. In terms of moisture content in honey, we observed a sensitivity around −0.3154 nm/% and −0.3394 nm/% for brands A and B, respectively. Additionally, temperature tests were performed, showing that the sensor works optimally up to 30 °C. The results were validated using a conventional refractometer, showing a close agreement with the data obtained and confirming the reliability and accuracy of the proposed sensor. Compared to other refractometers, the MMI sensor offers advantages such as real-time monitoring, ease of assembly, cost-effectiveness, and minimal maintenance. Furthermore, the sensor represents an alternative tool to guarantee the quality and authenticity of honey, overcoming the limitations of conventional measurement techniques.

The application of distributed fiber optic strain and temperature measurement can be utilized to address a multitude of measurement tasks across a diverse range of fields, particularly in the context of structural health monitoring in the domains of building construction, civil engineering, and special foundation engineering. However, a comprehensive understanding of the influences on the measurement method and the sensors is essential to prevent misinterpretations or measurement deviations. In this context, this study investigated the effects of moisture exposure, including various salt solutions and a high pH value, on a distributed strain measurement using Rayleigh backscattering. Three fiber optic sensors with different coating materials and one uncoated fiber were exposed to five different solutions for 24 h. The study revealed significant discrepancies (∼38%) in deformation between the three coating types depending on the surrounding solution. Furthermore, in contrast to the prevailing literature, which predominantly describes swelling effects, a negative deformation (∼−47 με) was observed in a magnesium chloride solution. The findings of this study indicate that corresponding effects can impact the precision of measurement, potentially leading to misinterpretations. Conversely, these effects could be used to conduct large-scale monitoring of chemical components using distributed fiber optic sensing.

Since light propagation in a multimode fiber (MMF) exhibits visually random and complex scattering patterns due to external interference, this study numerically models temperature and curvature through the finite element method in order to understand the complex interactions between the inputs and outputs of an optical fiber under conditions of temperature and curvature interference. The systematic analysis of the fiber’s refractive index and bending loss characteristics determined its critical bending radius to be 15 mm. The temperature speckle atlas is plotted to reflect varying bending radii. An optimal end-to-end residual neural network model capable of automatically extracting highly similar scattering features is proposed and validated for the purpose of identifying temperature and curvature scattering maps of MMFs. The viability of the proposed scheme is tested through numerical simulations and experiments, the results of which demonstrate the effectiveness and robustness of the optimized network model.

To achieve omnidirectional sensitive detection of partial discharge (PD) in transformers and to avoid missing PD signals, a fiber optic omnidirectional sensing method for PD in transformers combined with the fiber Bragg grating (FBG) and Fabry-Perot (F-P) cavity is proposed. The fiber optic omnidirectional sensor for PD as a triangular prism was developed. The hollow structure of the probe was used to insert a single-mode fiber to form an F-P cavity. In addition, the three sides of the probe were used to form a diaphragm-type FBG sensing structure. The ultrasound sensitization diaphragm was designed based on the frequency characteristics of PD in the transformer and the vibration model of the diaphragm in the liquid environment. The fiber optic sensing system for PD was built and the performance test was conducted. The results show that the resonant frequency of the FBG acoustic diaphragm is around 20 kHz and that of the F-P cavity acoustic diaphragm is 94 kHz. The sensitivity of the developed fiber optic sensor is higher than that of the piezoelectric transducer (PZT). The lower limit of PD detection is 68.72 pC for the FBG sensing part and 47.97 pC for the F-P cavity sensing part. The directional testing of the sensor and its testing within a transformer simulation model indicate that the proposed sensor achieves higher detection sensitivity of PD in all directions. The omnidirectional partial discharge ultrasound sensing method proposed in this paper is expected to reduce the missed detection rate of PD. [ABSTRACT FROM AUTHOR]

Evanescent wave optical fibre sensors have attracted a lot of attention for the detection of chemical species due to their sensitivity, selectivity, and repeatability. In addition, plastic optical fibre sensors are inexpensive, simple to fabricate, and not only act as sensors, but the same fibre can also be used to transport sensor signals. The fibre sensor's sensitivity can be increased by removing the fibre cladding partially or fully. Also, different geometries have been reported to enhance the sensitivity of fibre sensors even more. In this paper, we report a U-shaped optical fibre sensor that utilises evanescent wave absorption as its primary mechanism for determining phosphate concentration in water. The U-shaped geometry offers enhanced sensitivity as compared to straight geometry. The developed U-shaped plastic optical fibre probe demonstrates impressive linear performance, which is evident in its remarkable regression coefficient of 98.48% and sensitivity of 0.0991 O.D./ppm. Due to their distinct features, plastic optical fibre sensors pave the way for improved water quality monitoring and analysis, which presents a vital contribution to both the industrial and environmental domains. [ABSTRACT FROM AUTHOR]

A novel fiber optic sensor based on hydrogel-immobilized enzyme complex was developed for the simultaneous measurement of dual- parameter, the leap from a single parameter detecting fiber optic sensor to a fiber optic sensor that can continuously detect two kinds of parameters was achieved. By controlling the temperature from high to low, the function of fiber sulfide sensor and fiber DCP sensor can be realized, so as to realize the continuous detection of dual-parameter. The different variables affecting the sensor performance were evaluated and optimized. Under the optimal conditions, the response curves, linear detection ranges, detection limits and response times of the dual-parameter sensor for testing sulfide and DCP were obtained, respectively. The sensor displays high selectivity, good repeatability and stability, which have good potentials in analyzing sulfide and DCP concentration of practical water samples. [ABSTRACT FROM AUTHOR]

A corrugated surface long period grating (LPG) was fabricated on a flat-shaped plastic optical fiber (POF) as a refractive index (RI) sensor by a simple pressing with the heat pressure and mechanical die press print method. The light propagation characteristics of an LPG imprinted on a multi-mode POF were analyzed by the method of geometrical optics. Theoretical and experimental results showed that the structural parameters of the sensor affected the RI sensing performance, and the sensor with a thinner flat thickness, a deeper groove depth of the corrugated surface LPG, and a longer LPG exhibited better RI sensing performance. When the POF with a diameter of 1 mm was pressed with the heat pressure to a flat shape with a thickness of 600 µm, an LPG with a period of 300 µm, a groove depth of 200 µm, and a length of 6 cm was fabricated on it, and the RI sensitivity of 1447%/RIU was obtained with a resolution of 5.494×10−6 RIU. In addition, the influences of the POF cladding, tilting of LPG, and bending of the sensing structure were investigated. The results demonstrated that after removing the cladding and tilting or bending the LPG, the RI sensing performance was improved. When the LPG imprinted on the flat-shaped POF was bent with a curvature radius of 6/π cm, the highest sensitivity of 6 563%/RIU was achieved with a resolution of 2.487×10−9 RIU in the RI range of 1.3330–1.4230. The proposed sensor is a low-cost solution for RI measurement with the features of easy fabrication, high sensitivity, and intensity modulation at the visible wavelengths. [ABSTRACT FROM AUTHOR]

Three interferometers (the Sagnac sensor, the linear polarization interferometer, and the reflecting polarization interferometer) incorporated with the bow tie fiber are proposed to detect the seawater temperature. Bow tie fiber, a kind of polarization maintaining fiber, has stress induced birefringence. The three interferometers are categorized as transmission and reflection types to analyze the sensing principles. Related experiments are performed to explore the influence of the wavelength and length of the bow tie fiber on the sensitivity and free spectral range (FSR). The sensitivity and FSR both increase with the wavelength increasing. The sensitivity fluctuates in a small range and FSR decreases with the length increasing. The reflecting polarization interferometer has the bigger sensitivity of −1.19nm/°C than the other two. And it has the advantages of easy fabrication, simple operation, and good stability, so it is applicable in real ocean exploration. Our work can provide a reference to researchers who do oceanographic research. [ABSTRACT FROM AUTHOR]

The paper considers the advantages and disadvantages of existing methods for temperature compensation of data from fiber-optic sensors based on fiber Bragg gratings as part of an embedded system for simultaneous testing of deformation and temperature of polymer composite materials. It is shown that when external temperature testing is impossible, it is most expedient to implement the method of two optical fibers with different sensitivity to at least one of these parameters due to different dopants. Technological issues related to the formation of a spatial topology and the provision of an effective survey of the embedded optical system for monitoring polymer composite materials by the two-fiber method are considered. The results of theoretical research of a linear model of temperature compensation, a model that takes into account the influence of cross sensitivity, as well as a quadratic model of temperature compensation of optical testing data are presented. It has been established that the linear model is the simplest, however, when using it, one should take into account the error associated with the inaccuracy of the approximation of optical inspection data by a linear function. At the same time, it is shown that in order to improve the quality and reliability of the results of optical testing, it is advisable to use a quadratic model of temperature compensation, which provides an error level comparable to the error of the fiber-optic sensor survey device. The results obtained can be used to develop methods for the simultaneous testing of samples, as well as monolithic and three-layer structures from structural layered polymer composite materials with limiting molding conditions (temperature less than 180°C, specific pressure lower than 0.7 MPa), as in the process of bench and other tests, and, in the future, in real operating conditions. [ABSTRACT FROM AUTHOR]

Heparin is a common anticoagulant, but heparin overdose is a common intensive care unit (ICU) medication error due to the narrow therapeutic window of heparin. Conventional methods to monitoring heparin suffer from long turnaround time, the need for skilled personnel, and low frequency of sampling. To overcome these issues, we describe here a fiber optic photoacoustic (PA) sensor for real-time heparin monitoring. The proposed sensor was validated with in vitro testing and in a simulated in vivo model using the following samples: (1) phosphate-buffered saline (PBS), (2) spiked human plasma, (3) spiked whole human blood, and (4) clinical samples from patients treated with heparin. Samples were validated by comparing the PA signal to the activated partial thromboplastin time (aPTT) as well as the activated clotting time (ACT). Importantly, the proposed sensor has a short turnaround time (3 min) and a limit of detection of 0.18 U/ml in whole human blood. The PA signal is linear with heparin dose and correlates with the aPTT value (Pearson's r = 0.99). The PA signal from 32 clinical samples collected from eight patients linearly correlated with ACT values (Pearson's r = 0.89, in vitro; Pearson's r = 0.93, simulated in vivo). The PA signal was also validated against the cumulative heparin dose (Pearson's r = 0.94, in vitro; Pearson's r = 0.96, simulated in vivo). This approach could have applications in both in vitro and real-time in vivo heparin monitoring.

Abstract A corrugated surface long period grating (LPG) was fabricated on a flat-shaped plastic optical fiber (POF) as a refractive index (RI) sensor by a simple pressing with the heat pressure and mechanical die press print method. The light propagation characteristics of an LPG imprinted on a multi-mode POF were analyzed by the method of geometrical optics. Theoretical and experimental results showed that the structural parameters of the sensor affected the RI sensing performance, and the sensor with a thinner flat thickness, a deeper groove depth of the corrugated surface LPG, and a longer LPG exhibited better RI sensing performance. When the POF with a diameter of 1 mm was pressed with the heat pressure to a flat shape with a thickness of 600 µm, an LPG with a period of 300 µm, a groove depth of 200 µm, and a length of 6 cm was fabricated on it, and the RI sensitivity of 1447%/RIU was obtained with a resolution of 5.494×10−6 RIU. In addition, the influences of the POF cladding, tilting of LPG, and bending of the sensing structure were investigated. The results demonstrated that after removing the cladding and tilting or bending the LPG, the RI sensing performance was improved. When the LPG imprinted on the flat-shaped POF was bent with a curvature radius of 6/π cm, the highest sensitivity of 6 563%/RIU was achieved with a resolution of 2.487×10−9 RIU in the RI range of 1.3330–1.4230. The proposed sensor is a low-cost solution for RI measurement with the features of easy fabrication, high sensitivity, and intensity modulation at the visible wavelengths.

Abstract Three interferometers (the Sagnac sensor, the linear polarization interferometer, and the reflecting polarization interferometer) incorporated with the bow tie fiber are proposed to detect the seawater temperature. Bow tie fiber, a kind of polarization maintaining fiber, has stress induced birefringence. The three interferometers are categorized as transmission and reflection types to analyze the sensing principles. Related experiments are performed to explore the influence of the wavelength and length of the bow tie fiber on the sensitivity and free spectral range (FSR). The sensitivity and FSR both increase with the wavelength increasing. The sensitivity fluctuates in a small range and FSR decreases with the length increasing. The reflecting polarization interferometer has the bigger sensitivity of −1.19nm/°C than the other two. And it has the advantages of easy fabrication, simple operation, and good stability, so it is applicable in real ocean exploration. Our work can provide a reference to researchers who do oceanographic research.

Coastal concrete structures, such as cross-sea bridges and tunnels, are susceptible to the penetration of chloride ions, which can lead to the deterioration of the passive film on the rebar surface, consequently accelerating the corrosion process. Conventional methods for monitoring chloride ions typically require in situ drilling for sample collection, thereby compromising efficiency and accuracy. Additionally, real-time monitoring and early warning cannot be achieved. To address these challenges, this work introduces a fluorescent-probe-based fiber optic sensor for monitoring chloride levels in concrete structures. Quinine sulfate was chosen as the fluorescent material due to its exceptional sensitivity to chloride ions and its stability in concrete environments. The proposed sensor was manufactured using sol–gel and 3D-printing techniques. Tests were conducted using concrete simulation fluid and cement mortar specimens. The results demonstrate that the sensitivity of the proposed sensor is greater than 0.01 M, and its accuracy in penetration depth measurement is better than 3 mm. The findings confirm that the designed fiber optic sensor based on quinine sulfate enables real-time monitoring of chloride ions in concrete structures, offering high sensitivity (0.1% in concentration and 2.7 mm in terms of penetration depth), unique selectivity (as it is immune to other ions whose concentrations are 10 times higher than those of Cl−), and a compact size (10 × 20 mm). These attributes render it promising for practical engineering applications.

In the paper, a new method of phase measurement error suppression in a phase-sensitive optical time domain reflectometer is proposed and experimentally proved. The main causes of phase measurement errors are identified and considered, such as the influence of the recording interferometer instabilities and laser wavelength instability, which can cause inaccuracies in phase unwrapping. The use of a Mach–Zender interferometer made by 3 × 3 fiber couplers is proposed and tested to provide insensitivity to the recording interferometer and laser source instabilities. It is shown that using all three available photodetectors of the interferometer, instead of just one pair, achieves significantly better accuracy in the phase unwrapping. A novel compensation scheme for accurate phase measurements in a phase-sensitive optical time domain reflectometer is proposed, and a comparison of the measurement signals with or without such compensation is shown and discussed. The proposed method, using three photodetectors, allows for very good compensation of the phase measurement errors arising from common-mode noise from the interferometer and laser source, providing a significant improvement in signal detection. In addition, the method allows the tracking of slow temperature changes in the monitored fiber/object, which is not obtainable when using a simple low-pass filter for phase unwrapping error reduction, as is customary in several systems of this kind.

This paper details the comprehensive activities conducted in a laboratory setting to assess the structural health monitoring (SHM) of prefabricated building envelopes. Integrating sensors into building components like curtain wall facades poses challenges but offers opportunities for monitoring structural health, requiring compliance with regulatory standards. The research investigates the possibility of defining a kit of conventional and multi-parameter sensors integrated within the building envelope to monitor its behavior during the performance test conducted. The kit of sensors also includes Fiber Optic Sensors for effectively monitoring building envelope behavior and structural integrity. In this context, the European project InComEss (H2020-GA862597) aims to define a stand-alone solution for SHM using Piezoelectric Energy Harvesting Systems (PE-EHS) for façade monitoring through FBG/FOS system. After analyzing the main façade structural stress, a series of FBGs, accelerometers, and force washers were integrated within a 1:1 scale façade prototype and tested in a laboratory following the test sequence parameters required by the curtain wall standard EN 13830. The data collected were analyzed with the aim of monitoring the façade behavior before and after the tests. The results show that the façade’s performance passed the assessing test criteria without reporting any damages. In addition, the outcomes demonstrated the effectiveness of the defined kit of multi-parameter sensors for the building envelope’s SHM.

This paper presents a mathematical model of the sensitive element of a refractometric fiber-optic sensor the principle of operation of which is based on the phenomenon of surface plasmon resonance. The sensing element design is a sequential connection of a multimode fiber (MMF), a single-mode fiber (SMF), and a multimode fiber forming an MMF-SMF-MMF structure. The SMF site is coated with a thin film of gold. To model the element, the approach used in calculating the classical Kretschmann configuration for volumetric optical structures was applied. The refractive index of the fiber is calculated based on the Sellmeyer equation, and the refractive index of the gold is determined using the Drude model. The simulation results are compared with experimentally obtained transmission spectra of fabricated samples of sensing elements. For approbation of the model, the sensing elements of fiber-optic sensors with the following parameters are made: core diameter of multimode fiber 62.5 μm, core diameter of singlemode fiber 9 μm, coating SMF-segment with 50 nm gold film. Transmission spectra of fiber-optic sensor sensing elements in aqueous glucose solutions of various concentrations were obtained. It is demonstrated that the proposed model describes well the experimentally obtained transmission spectra of sensitive elements based on MMF-SMF-MMF structures in the region of surface plasmon resonance. The proposed model can be used to optimize the design of the sensitive element of refractometric fiber-optic sensors in order to increase the sensitivity. The proposed model implies its use in the development of an algorithm for interrogation of sensing elements based on fiber MMF-SMF-MMF structures.

In a fiber-based surface plasmon resonance (SPR) sensor, with multiple layers, including fluoride glass core, cladding, metal (Ag), graphene and alcohols as the analyte, we focused on comparing the effects of 12 different types of fluoride glass cores from three main groups of fluorozirconate (ZrF4-based), fluoroaluminate (AlF3-based) and fluoroindate (InF3-based). The comparison was conducted to evaluate the sensor’s sensitivity and figure of merit (FOM) at specific near infrared (NIR) wavelengths (785 nm, 852 nm, 895 nm and 980 nm) while keeping other parameters constant. The highest FOM was consistently observed at the wavelength of 980 nm for all three categories of fluoride glass cores. Among them, the fluoride glass core IZBSC (40 InF3-20 ZnF2-15 BaF2-20 SrF2-5 CaF2) from InF3-based group presented the largest FOM = 1459.15 RIU−1. Furthermore, we observed that the FOM of the fiber types belonging to the ZrF4-based and InF3-based categories increased with the wavelength. However, the fluoroaluminate fibers showed different trend and they also exhibited the smallest FOM values at 852 nm, 895 nm and 980 nm wavelengths. To enhance the sensor’s performance, we explored the incorporation of an oxide layer into the to the SPR sensor with a ZBLAN (55.8 ZrF4-14.4 BaF2-5.8 LaF3-3.8 AlF3-20.2 NaF) core. We analyzed the effects of various oxide coatings (Sc2O3, Lu2O3, Al2O3, GeO2, TeO2, Ta2O5, MgO, TiO2, and ZnO) on the Ag layer, which has not previously studied, to the best of our knowledge. Among the different oxide coatings, the Ta2O5 layer, with optimized thickness, exhibited a significant enhancement, achieving FOM of 1631.43 RIU−1.

Innovation in the economy is closely tied to energy development, encompassing the exploration of new energy sources, increased energy production efficiency, and the integration of diverse energy sources for safe and effective supply to industries and households. Outdated energy infrastructure disrupts electricity continuity and hampers economic innovation. Power interruptions lead to higher SAIDI and SAIFI reliability indices. Quality and reliability requirements have sparked interest in enclosed energy devices. Vacuum technology has been pivotal in electrical switchgear insulation and arc-quenching for over four decades. However, the lack of real-time pressure monitoring systems for vacuum equipment, especially enclosed disconnectors, limits their use as isolation connectors. Potential insulation failure poses risks to power line maintenance teams and can lead to unplanned shutdowns, further compromising energy supply quality. This article explores an innovative pressure monitoring system for vacuum interrupters, utilizing fiber optic Bragg grids as a measuring sensor, enabling pressure measurement within the vacuum chamber ranging from 2 × 101 Pa to 5 × 105 Pa. [ABSTRACT FROM AUTHOR]

This paper reports a fiber in-line Fabry–Perot interferometer (FPI) fabricated in a no-core fiber using the direct femtosecond laser writing technique for high-temperature sensing applications. Two in-line reflectors are directly inscribed in a no-core fiber to construct a low-finesse FPI. Fringe visibility greater than 10 dB is obtained from the reflection spectra of the fabricated no-core fiber FPIs. Temperature responses of a prototype no-core fiber FPI are characterized up to 1000 °C. The proposed configuration is compact and easy to fabricate, making it attractive for sensing applications in high-temperature harsh environments. [ABSTRACT FROM AUTHOR]

With the unprecedented development of green and renewable energy sources, the proportion of clean hydrogen (H2) applications grows rapidly. Since H2 has physicochemical properties of being highly permeable and combustible, high-performance H2 sensors to detect and monitor hydrogen concentration are essential. This review discusses a variety of fiber-optic-based H2 sensor technologies since the year 1984, including: interferometer technology, fiber grating technology, surface plasma resonance (SPR) technology, micro lens technology, evanescent field technology, integrated optical waveguide technology, direct transmission/reflection detection technology, etc. These technologies have been evolving from simply pursuing high sensitivity and low detection limits (LDL) to focusing on multiple performance parameters to match various application demands, such as: high temperature resistance, fast response speed, fast recovery speed, large concentration range, low cross sensitivity, excellent long-term stability, etc. On the basis of palladium (Pd)-sensitive material, alloy metals, catalysts, or nanoparticles are proposed to improve the performance of fiber-optic-based H2 sensors, including gold (Au), silver (Ag), platinum (Pt), zinc oxide (ZnO), titanium oxide (TiO2), tungsten oxide (WO3), Mg70Ti30, polydimethylsiloxane (PDMS), graphene oxide (GO), etc. Various microstructure processes of the side and end of optical fiber H2 sensors are also discussed in this review. [ABSTRACT FROM AUTHOR]

This research investigates fiber Bragg grating (FBG) temperature sensing performance in monitoring non--uniformity of non-thermal plasma (NTP) formation in a packed-bed reactor using FBG operating at atmospheric pressure. Two FBGs made from germanium doped fiber were embedded inside and outside the PBNTP reactor to allow for comparison between the temperatures inside and outside of the reactor to be made. Each FBG comes with three grating series, which allow the reactor temperatures at three different locations inside or outside the reactor to be measured and compared. Two types of plasma, namely nitrogen (N2) and argon (Ar) were generated in the reactor at a gas flow rate in the range of 2 - 7 L/min and applied voltage in the range of l - 20 kV. It was found that the PBNTP reactor temperature varies up to 20 oC at different positions inside and up to 40 oC outside of the reactor. This finding shows the non-uniformity of plasma formation and the nature of the plasma's localized thermodynamic equilibrium (LTE). The sensitivity of the FBG temperature sensor used in this study is estimated at 10.36 - 10.50 pm/oC. [ABSTRACT FROM AUTHOR]

This study fabricated an ultra-high refractive index (RI) sensor based on tapered no-core fiber (NCF) involving a simple inexpensive process. A splice section of NCF in the middle of single mode fiber was tapered to small diameters. The sensor was sensitive to the surrounding RI with a large measurement range of 1.3330–1.4437. The RI sensitivity differed with varying wavelengths, with a value of 41 916 nm/RIU at approximately 1550 nm, for the RI ranges of 1.4407–1.4437. It yielded a low temperature sensitivity of 8 pm °C−1, which indicates an ultra-low temperature cross-sensitivity. The proposed fiber optic RI sensor can be used in many fields such as medicine and biochemical applications. [ABSTRACT FROM AUTHOR]

We present a fiber-optic sensor based on the principles of a Fabry–Perot interferometer (FPI), which promptly, sensitively, and precisely detects blood clot formation. This sensor has two types of sensor tips; the first was crafted by splicing a tapered fiber into a single-mode fiber (SMF), where fine-tuning was achieved by adjusting the tapered diameter and length. The second type is an ultra-compact blood FPI situated on the core of a single-mode fiber. The sensor performance was evaluated via clot-formation-indicating spectrum shifts induced by the varied quantities of a thrombin reagent introduced into the blood. The most remarkable spectral sensitivity of the micro-tip fiber type was approximately 7 nm/μL, with a power sensitivity of 4.1 dB/μL, obtained with a taper fiber diameter and length of 55 and 300 μm, respectively. For the SMF type, spectral sensitivity was observed to be 8.7 nm/μL, with an optical power sensitivity of 0.4 dB/μL. This pioneering fiber-optic thrombosis sensor has the potential for in situ applications, healthcare, medical monitoring, harsh environments, and chemical and biological sensing. The study underscores the scope of optical technology in thrombus detection, establishing a platform for future medical research and application. [ABSTRACT FROM AUTHOR]

The goals of this study were to analyze the capabilities of DAS (distributed sensors) in resolving mining problems, compare them with existing seismoacoustic data collection systems, and prepare the basis for conducting seismoacoustic studies with recording by a fiber optic distributed system. This paper considers the capabilities of recording seismoacoustic responses using fiber optic distributed acoustic systems (DAS). Based on physical and geometrical analysis, the amplitude-frequency responses (characteristics) of recorded longitudinal waves for straight and helically-wound fibers were obtained. In the case of helically-wound fiber, the frequency response depends on several key factors: integrating the measured value along the fiber based on the measurement; the angle of incidence on the cable; and the winding angle of the fiber in the cable. An increase in the winding angle increases the uniformity of the amplitude-frequency characteristics of longitudinal waves both in terms of frequencies and angles of incidence. At the same time, helical winding changes the effective response spacing (gauge length). This makes it possible, by summing the responses of the straight and helically-wound fibers due to the overlap of the spectra, to record frequencies that are suppressed in case of separate recording. Based on the study results, a cable design was proposed to record broadband seismoacoustic responses enabling a wide range of mining and engineering problems to be resolved, and for seismic surveys both in wells and on the surface to be carried out.

The choice of wavelet decomposition layer (DL) not only affects the denoising quality of wavelet denoising (WD), but also limits the denoising efficiency, especially when dealing with real phase-sensitive optical time-domain reflectometry (φ-OTDR) signals with complex signal characteristics and different noise distributions. In this paper, a straightforward adaptive DL selection method is introduced, which dose not require known noise and clean signals, but relies on the similarity between the probability density function (PDF) of method noise (MN) and the PDF of Gaussian white noise. Validation is carried out using hypothetical noise signals and measured φ-OTDR vibration signals by comparison with conventional metrics, such as peak signal-to-noise ratio (PSNR) and structural similarity (SSIM). The proposed wavelet DL selection method contributes to the fast processing of distributed fiber optic sensing signals and further improves the system performance.

This study proposes a method for interferometric fiber optic sensor readouts. The method utilizes the advantages of the active homodyne demodulation technique and low-coherence interferometry. The usage of the tandem low-coherence interferometer enables modulating the reference interferometer without any changes to the sensor. This achieves high sensitivity, high stability, and a wide frequency band. A sensitivity of up to 0.1 nm (RMS) in the frequency range of 5 kHz is demonstrated by detecting acoustic signals with a fiber Michelson interferometer as a sensor.

A number of textile-based fiber optic sensors have recently been proposed for the continuous monitoring of vital signs. However, some of these sensors are likely unsuitable for conducting direct measurements on the torso as they lack elasticity and are inconvenient. This project provides a novel method for creating a force-sensing smart textile by inlaying four silicone-embedded fiber Bragg grating sensors into a knitted undergarment. The applied force was determined within 3 N after transferring the Bragg wavelength. The results show that the sensors embedded in the silicone membranes achieved enhanced sensitivity to force, as well as flexibility and softness. Additionally, by assessing the degree of FBG response to a range of standardized forces, the linearity (R2) between the shift in the Bragg wavelength and force was found to be above 0.95, with an ICC of 0.97, when tested on a soft surface. Furthermore, the real-time data acquisition could facilitate the adjustment and monitoring of force during the fitting processes, such as in bracing treatment for adolescent idiopathic scoliosis patients. Nevertheless, the optimal bracing pressure has not yet been standardized. This proposed method could help orthotists to adjust the tightness of brace straps and the location of padding in a more scientific and straightforward way. The output of this project could be further extended to determine ideal bracing pressure levels. [ABSTRACT FROM AUTHOR]

The paper presents the application of a phase-sensitive optical time-domain reflectometer (phi-OTDR) in the field of urban infrastructure monitoring. In particular, the branched structure of the urban network of telecommunication wells. The encountered tasks and difficulties are described. The possibilities of usage are substantiated, and the numerical values of the event quality classification algorithms applied to experimental data are calculated using machine learning methods. Among the considered methods, the best results were shown by convolutional neural networks, with a probability of correct classification as high as 98.55%. [ABSTRACT FROM AUTHOR]

This paper presents the development of taper-in-taper fiber (TITF)–optical fiber-based sensors for chemical and biological detection. TITF structure is a fiber structure formed by fabricating a taper again on the taper region of the traditional taper fiber. The experimental results show that the TITF structure has a lower transmitted intensity than the common taper fiber structure. It is demonstrated that the structure of TITF is more conducive to evanescent waves, thereby making it more sensitive to changes in the refractive index (RI) of the external environment. To confirm this, measurements of ethanol solutions with different water contents are taken using the TITF structure to showcase the chemical sensing, thus verifying its sensitivity to RI changes in the external environment. The sensor can measure ethanol solutions from 0 to 100% with a sensitivity of 4.06 a.u./%. Thereafter, the TITF sensor is modified with ZnO-NPs to enhance its sensitivity for biological sensing (creatinine detection). The transmitted intensity of different concentrations of creatinine solution (0–2000 μM) is measured using the proposed sensor. The sensor showed good linearity and a high sensitivity of 0.11 a.u./μM for creatinine solution. Therefore, it is demonstrated that the TITF sensor with ZnO-NPs can be used for effective biological sensing. [ABSTRACT FROM AUTHOR]