Search

The dewetting and ordering characteristics of a lamellae-forming poly(styrene-block-methyl methacrylate) block copolymer (BCP) either alone or blended with low-molecular-weight polystyrene and poly...

We used reference-free grazing incidence X-ray fluorescence to measure the density of four thiol Raman-active molecules assembled on gold surfaces. This value is needed to reliably quantify the number of molecules contributing to the SERS signal in a plasmonic substrate in the effort to standardize the enhancement factor calculation and such molecules constitute suitable probes for benchmarking SERS sensors.

Self-assembled monolayers of 7-mercapto 4-methylcoumarin (MMC) on a flat gold surface were studied by Molecular Dynamics (MD) simulations, reference-free grazing incidence X-ray fluorescence (GIXRF) and X-ray photoemission spectroscopy (XPS), to determine the maximum monolayer density and to investigate the nature of the molecule/surface interface. In particular, the protonation state of the sulfur atom upon adsorption was analyzed, since some recent literature presented evidences for physisorbed thiols (preserving the S-H bond), unlike the common picture of chemisorbed thiyls (losing the hydrogen). MD with a specifically tailored force field was used to simulate either thiol or thiyl monolayers with increasing number of molecules, to determine the maximum dynamically stable densities. This result was refined by computing the monolayer chemical potential as a function of the density with the Bennet Acceptance Ratio method, based again on MD simulations. The monolayer density was measured with GIXRF, which provided a quantitative estimate of the number of sulfur atoms on top of flat gold surfaces embedded in a solution of MMC, to allow the formation of a dense monolayer. The sulfur core level binding energies in the same monolayers were measured by XPS, fitting the recorded spectra with the binding energies proposed in the literature for free or adsorbed thiols and thiyls, to get insight on the nature of the molecular species present in the layer.

Self-assembled monolayers (SAM) of 7-mercapto-4-methylcoumarin (MMC) on a flat gold surface were studied by molecular dynamics (MD) simulations, reference-free grazing incidence X-ray fluorescence (GIXRF) and X-ray photoelectron spectroscopy (XPS), to determine the maximum monolayer density and to investigate the nature of the molecule/surface interface. In particular, the protonation state of the sulfur atom upon adsorption was analyzed, since some recent literature presented evidence for physisorbed thiols (preserving the S-H bond), unlike the common picture of chemisorbed thiyls (losing the hydrogen). MD with a specifically tailored force field was used to simulate either thiol or thiyl monolayers with increasing number of molecules, to determine the maximum dynamically stable densities. This result was refined by computing the monolayer chemical potential as a function of the density with the bennet acceptance ratio method, based again on MD simulations. The monolayer density was also measured with GIXRF, which provided the absolute quantification of the number of sulfur atoms in a dense self-assembled monolayer (SAM) on flat gold surfaces. The sulfur core level binding energies in the same monolayers were measured by XPS, fitting the recorded spectra with the binding energies proposed in the literature for free or adsorbed thiols and thiyls, to get insight on the nature of the molecular species present in the layer. The comparison of theoretical and experimental SAM densities, and the XPS analysis strongly support the picture of a monolayer formed by chemisorbed, dissociated thiyls.

As the advantageous properties of nanoparticles (NPs) often emerge only when appropriate coupling and exchange phenomena between the NPs can take place, the control of the inter-particle distance, regular ordering, and location of the nanoparticles onto solid supports is a critical issue. A robust method to control the spatial organization of NPs onto solid supports, based on the use of self-assembling di-block copolymers (BCPs) as structure-guiding material, is reported. Two different polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA) BCPs, characterized by a different PS volume fraction, were used as matrices for the fabrication of nanocomposite thin films with cylindrical and lamellar morphologies controlled at the nanoscale. Selective inclusion of surface functionalized gold (Au) and zinc oxide (ZnO) NPs of appropriate size in the PS nanodomains was achieved from dispersions of the BCPs and NPs in a common solvent. The orientation of the BCPs cylinder and lamellar nanodomains in spin-coated thin films was controlled by solvent and thermal annealing protocols, coupled with techniques of surface neutralization.

The azobenzene chromophore is used as a functional dye for the development of smart microfluidic devices. A single layer microfluidic channel is produced, exploiting the potential of a dye doped PDMS formulation. The key advantage of this approach is the possibility to control the fluid flow by means of a simple light stimulus. Furthermore, the deformation can be controlled in time, space and intensity, giving rise to several degrees of freedom in the actuation of the channel squeezing. A future perspective will be the implementation of the microfluidic platform with structured light, to have the possibility to control the flow in a parallel and reversible manner at several points, modifying the pattern in real time.

Nanoporous/nanocomposite thin films with controlled morphology at nanoscale were prepared onto transparent and conductive indium tin oxide (ITO) supports by exploiting the self-assembly of a lamellar polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA) block copolymer (BCP). A perpendicular orientation of PS and PMMA lamellar nanodomains was achieved by grafting a random PS-r-PMMA copolymer to the ITO supports and successive thermal annealing. Stable and reproducible nanoporous morphologies, characterized by PS lamellar nanodomains of width equal to ≈20 nm alternating to nanochannels of width equal to ≈8 nm, were obtained by irradiating the samples with an appropriate UV-C dose able to fix the relative arrangement of PS domains through activation of cross-linking reactions and selective removal of PMMA blocks. Nanoporous hybrid composites with a stable morphology were obtained either by applying the UV irradiation protocol to BCP nanocomposites characterized by selective inclusion of zinc oxide (ZnO) nanoparticles (NPs) in the PS domains (nanocomposite first/nanopores after) or by selective infiltration of cadmium selenide (CdSe) NPs in the nanochannels left free by PMMA removal through UV irradiation (nanopores first/nanocomposite after), demonstrating the strenght of the approach.

In this work, we performed a systematic study on the effect of the geometry of pre-patterned templates and spin-coating conditions on the self-assembling process of colloidal nanospheres. To achieve this goal, large-scale templates, with different size and shape, were generated by direct laser-writer lithography over square millimetre areas. When deposited over patterned templates, the ordering dynamics of the self-assembled nanospheres exhibits an inverse trend with respect to that observed for the maximisation of the correlation length &xi, on a flat surface. Furthermore, the self-assembly process was found to be strongly dependent on the height (H) of the template sidewalls. In particular, we observed that, when H is 0.6 times the nanospheres diameter and spinning speed 2500 rpm, the formation of a confined and well ordered monolayer is promoted. To unveil the defects generation inside the templates, a systematic assessment of the directed self-assembly quality was performed by a novel method based on Delaunay triangulation. As a result of this study, we found that, in the best deposition conditions, the self-assembly process leads to well-ordered monolayer that extended for tens of micrometres within the linear templates, where 96.2% of them is aligned with the template sidewalls.

We exploit directed self-assembly of di-block copolymers to obtain metal-dielectric nano-patterns over large area acting as hyperbolic meta-surface at visible wavelengths. We show that decay rate can be enhanced when spontaneous emitters are thereon located.

The enhancement factor (EF) is an essential parameter in the field of surface-enhanced Raman spectroscopy (SERS), indicating the magnification of the Raman signal of molecules interacting with the surface of plasmonic nanostructures. The calculation of EF requires a careful evaluation of both the signal intensities and the number of molecules in SERS and normal Raman conditions. The determination of the surface density of molecules adsorbed on the plasmonic substrate is a challenging task, but essential for the estimation of the number of SERS-active molecules. This paper describes the determination of EF using 7-mercapto-4-methylcoumarin (MMC) as the probe molecule on gold-coated silicon nanowires, integrating SERS and normal Raman spectroscopy with X-ray fluorescence (RF-XRF) data that provide a reference-free quantitative measurement of the molecular surface density. In addition, the surface coverage of MMC on the substrate is modelled by molecular mechanics (MM) and molecular dynamics (MD) simulations.

We investigated the dewetting process on flat and chemically patterned surfaces of ultrathin films (thickness between 2 and 15 nm) of a cylinder forming polystyrene- block-poly(methyl methacrylate) (PS- b-PMMA) spin coated on poly(styrene- r-methyl methacrylate) random copolymers (RCPs). When the PS- b-PMMA film dewets on a 2 nm-thick RCP layer, the ordering of the hexagonally packed PMMA cylinders in the dewetted structures extends over distances far exceeding the correlation length obtained in continuous block copolymer (BCP) films. As a result, micrometer-sized circular droplets featuring defectless single grains of self-assembled PS- b-PMMA with PMMA cylinders perpendicularly oriented with respect to the substrate are generated and randomly distributed on the substrate. Additionally, alignment of the droplets along micrometric lines was achieved by performing the dewetting process on large-scale chemically patterned stripes of 2 nm thick RCP films by laser lithography. By properly adjusting the periodicity of the chemical pattern, it was possible to tune and select the geometrical characteristics of the dewetted droplets in terms of maximum thickness, contact angle and diameter while maintaining the defectless single grain perpendicular cylinder morphology of the circular droplets.

Block copolymers (BCPs) are emerging as a cost-effective nanofabrication tool to complement conventional optical lithography because they self-assemble in highly ordered polymeric templates with well-defined sub-20-nm periodic features. In this context, cylinder-forming polystyrene-block-poly(methyl methacrylate) BCPs are revealed as an interesting material of choice because the orientation of the nanostructures with respect to the underlying substrate can be effectively controlled by a poly(styrene-random-methyl methacrylate) random copolymer (RCP) brush layer grafted to the substrate prior to BCP deposition. In this work, we investigate the self-assembly process and lateral order evolution in RCP + BCP systems consisting of cylinder-forming PS-b-PMMA (67 kg mol–1, PS fraction of ∼70%) films with thicknesses of 30, 70, 100, and 130 nm deposited on RCP brush layers having thicknesses ranging from 2 to 20 nm. The self-assembly process is promoted by a rapid thermal processing machine operating at 250 °C fo...

Ordered magnetic nanodot arrays with extremely high density provide unique properties to the growing field of nanotechnology. To overcome the size limitations of conventional lithography, a fine-tuned sputtering deposition process on mesoporous polymeric template fabricated by diblock copolymer self-assembly is herein proposed to fabricate uniform and densely spaced nanometer-scale magnetic dot arrays. This process was successfully exploited to pattern, over a large area, sputtered Ni80Fe20 and Co thin films with thicknesses of 10 and 13 nm, respectively. Carefully tuned sputter-etching at a suitable glancing angle was performed to selectively remove the magnetic material deposited on top of the polymeric template, producing nanodot arrays (dot diameter about 17 nm). A detailed study of magnetization reversal at room temperature as a function of sputter-etching time, together with morphology investigations, was performed to confirm the synthesis of long-range ordered arrays displaying functional magnetic properties. Magnetic hysteresis loops of the obtained nanodot arrays were measured at different temperatures and interpreted via micromagnetic simulations to explore the role of dipole-dipole magnetostatic interactions between dots and the effect of magnetocrystalline anisotropy. The agreement between measurements and numerical modelling results indicates the use of the proposed synthesis technique as an innovative process in the design of large-area nanoscale arrays of functional magnetic elements.

Hydroxyl terminated poly(styrene-r-methyl methacrylate) (P(S-r-MMA)) random copolymers (RCPs), with molecular weight (Mn) spanning from 1700 to 69 000 g mol−1 and equal styrene unit content, were grafted at different temperatures onto a silicon oxide surface and subsequently used to study the orientation of nanodomains with respect to the substrate, in cylinder forming polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA) block copolymer thin films. When the grafting temperature increases from 250 to 310 °C, a substantial increase in the grafting rate is observed. In addition, an increase in the surface neutralization efficiency occurs thus resulting in an increase in the robustness of the surface neutralization step. These data revealed that the neutralization of the substrate is the result of a complex interplay between RCP film characteristics and underlying substrate properties that can be finely tuned by properly adjusting the temperature of the grafting process. © 2016 Society of Chemical Industry

Hydroxyl terminated poly(styrene-r-methyl methacrylate) (P(S-r-MMA)) random copolymers (RCPs), with molecular weight (Mn) spanning from 1700 to 69 000 g mol−1 and equal styrene unit content, were grafted at different temperatures onto a silicon oxide surface and subsequently used to study the orientation of nanodomains with respect to the substrate, in cylinder forming polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA) block copolymer thin films. When the grafting temperature increases from 250 to 310 °C, a substantial increase in the grafting rate is observed. In addition, an increase in the surface neutralization efficiency occurs thus resulting in an increase in the robustness of the surface neutralization step. These data revealed that the neutralization of the substrate is the result of a complex interplay between RCP film characteristics and underlying substrate properties that can be finely tuned by properly adjusting the temperature of the grafting process. © 2016 Society of Chemical Industry.

Controlling the location and the distribution of hot spots is a crucial aspect in the fabrication of surface-enhanced Raman spectroscopy (SERS) substrates for bio-analytical applications. The choice of a suitable method to tailor the dimensions and the position of plasmonic nanostructures becomes fundamental to provide SERS substrates with significant signal enhancement, homogeneity and reproducibility. In the present work, we studied the influence of the long-range ordering of different flexible gold-coated Si nanowires arrays on the SERS activity. The substrates are made by nanosphere lithography and metal-assisted chemical etching. The degree of order is quantitatively evaluated through the correlation length (ξ) as a function of the nanosphere spin-coating speed. Our findings showed a linear increase of the SERS signal for increasing values of ξ, coherently with a more ordered and dense distribution of hot spots on the surface. The substrate with the largest ξ of 1100 nm showed an enhancement factor of 2.6 · 103 and remarkable homogeneity over square-millimetres area. The variability of the signal across the substrate was also investigated by means of a 2D chemical imaging approach and a standard methodology for its practical calculation is proposed for a coherent comparison among the data reported in literature.

In recent years, the ability to pattern large areas at the micro- and nano-scale with stimuli-responsive materials has opened the opportunity to engineer surface structures and trigger peculiar properties such as complex optical functionalities or surface properties by laser-matter interactions. The use of light-sensitive materials, such as azobenzene compounds, can open the opportunity to active manipulate in terms of morphology, physical and mechanical properties a pre-patterned architectures, which are intrinsically static once fabricated. We employ azopolymers, in which the rapid and reversible photoisomerization reaction of azobenzene molecules can actuate mass transport phenomena typically parallel to the light polarization. The azopolymeric film is patterned by soft-imprinting as an array of micro-holes showing a well-defined isotropic round pores. Upon a linearly polarized illumination (365 nm, 150 W/cm2), we observe a deformation of the initial holes along the polarization direction, in such a way that the circular pores are transformed into long closed slits. A rotation of the polarization by 90° triggers a reconfiguration of the pristine round shape, with a good degree of control of the photo-induced pore reshaping. Due to the polarized-directionality of the photo-manipulation we demonstrate the possibility to tune the pristine morphology and properties along specific directions, providing a smart engineered platform with different reshaped micro-patterns. The light-induced contraction and expansion reshaping strategy of a porous polymeric structures shows exciting potential for a number of applications including microfluidics, lithography and tissue engineering. Tuning cells behavior in response to material manipulation cues is a promising goal in biology

A successful realisation of sub-20 nm features on silicon (Si) is becoming the focus of many technological studies, strongly influencing the future performance of modern integrated circuits. Although reactive ion etching (RIE), at both micrometric and nanometric scale has already been the target of many studies, a better understanding of the different mechanisms involved at sub-20 nm size etching is still required. In this work, we investigated the influence of the feature size on the etch rate of Si, performed by a cryogenic RIE process through cylinder-forming polystyrene-block-polymethylmethacrylate (PS-b-PMMA) diblock copolymer (DBC) masks with diameter ranging between 19-13 nm. A sensible decrease of the etch depth and etch rate was observed in the mask with the smallest feature size. For all the DBCs under investigation, we determined the process window useful for the correct transfer of the nanometric cylindrical pattern into a Si substrate. A structural and physicochemical investigation of the resulting nanostructured Si is reported in order to delineate the influence of various RIE pattern effects. Feature-size-dependent etch, or RIE-lag, is proved to significantly affect the obtained results.

The self-assembly (SA) of diblock copolymers (DBCs) based on phase separation into different morphologies of small and high-density features is widely investigated as a patterning and nanofabrication technique. The integration of conventional top-down approaches with the bottom-up SA of DBCs enables the possibility to address the gap in nanostructured lateral length standards for nanometrology, consequently supporting miniaturization processes in device fabrication. On this topic, we studied the pattern characteristic dimensions (i.e., center-to-center distance L0 and diameter D) of a cylinder-forming polystyrene-b-poly( methyl methacrylate) PS-b-PMMA (54 kg mol–1, styrene fraction 70%) DBC when confined within periodic SiO2 trenches of different widths (W, ranging between 75 and 600 nm) and fixed length (l, 5.7 μm). The characteristic dimensions of the PMMA cylinder structure in the confined configurations were compared with those obtained on a flat surface (L0 = 27.8 ± 0.5 nm, D = 13.0 ± 1.0 nm). The an...

The morphological evolution of cylinder-forming poly(styrene)-b-poly(methyl methacrylate) block copolymer (BCP) thick films treated at high temperatures in the rapid thermal processing (RTP) machine was monitored by means of in-depth grazing-incidence small-angle X-ray scattering (GISAXS). The use of this nondisruptive technique allowed one to reveal the formation of buried layers composed of both parallel-and perpendicular-oriented cylinders as a function of the film thickness (24 700 nm, the two interfaces are completely decoupled, and the formation of a superficial layer of about 50 nm composed of perpendicular cylinders is observed. Furthermore, the through-film morphology affects the nanodomain long-range order, which substantially decreases in correspondence with the beginning of the decoupling process. When the thick samples are exposed to longer thermal treatments, an increase in the long-range order of the nanodomains occurs, without any sensible variation of the thickness of the superficial layer.