Search

In the field of radio astronomy, the 21cm absorption line of HI is an important way to explore the large-scale structure and evolution history of the universe. The working frequency of FAST's 19 beam receiver is 1.05GHz to 1.45GHz, and the main observation object is to conduct an accurate and rapid intensity mapping survey of extragalactic HI’s signal. Aiming at the 21cm spectral line of the object, we designed a parallel data processing platform to mitigate the influence of foreground, instrument, radio frequency, standing wave and other noises on the spectral data, then generate the image data of the whole sky region. At present, we divide the process into flux calibration, bandpass and baseline correction, radio frequency interference marking and data gridding work, etc. The whole project was programmed in Python, and Cython was used for some projects to speed things up.

The infrared sky brightness level is an important parameter for infrared astronomical observation from the ground. It is necessary to obtain the infrared sky brightness level at an observatory site to evaluate the feasibility of infrared telescopes and instruments. In order to evaluate the possibility of developing infrared astronomical observations at several sites in China, the design of a continuous-scanning near-infrared sky brightness monitor (CNISBM), measuring 2.5 to 5 μm infrared sky brightness based on an InSb detector and a linear variable filter, is proposed. The optics and the detector were put in a vacuumed cryogenic dewar to reduce the background emission. The CNISBM has been tested by measuring the flux intensity of the observing window in the L-band. The results show that the sensitivity of CNISBM satisfies the requirements of the observations of 2.5- to 5-μm near-infrared sky brightness.

The Antarctica Plateau with high altitude, low water vapor and low thermal emission from the atmosphere is known as one of the best sites on the earth for conducting astronomical observations from the near infrared to the sub-millimeter. Many optical astronomical telescopes are proposed by Chinese astronomical society at present, such as Kunlun Dark Universe Survey Telescope (KDUST), 6.5-meter optical telescopes and 12-meter optical and infrared telescopes. Accurate estimation of the sky background brightness of proposed sites provides the scientific basis for instruments design and observatory site selection. Based on this requirement, a near-infrared sky brightness monitor (NISBM) based on InGaAs photoelectric diode is designed by using the method of chopper modulation and digital lock-in amplifier in the near infrared band of J, H, Ks. The adaptability of the monitor under extremely low temperature conditions in Antarctica is promoted by taking advantage of PID heating and fault detection system. Considering the weak signal of Ks band in Antarctica, a surface blackbody is equipped for real-time calibration. For the adverse circumstances to human, an EPICS and Web based Remote Control Software is implemented for unattended operation. The NISBM has been successfully installed in Dome A, Antarctica on January 2019.

Transiting extrasolar planets (exoplanets), especially those orbiting bright stars, are desired for study of the diversity of planetary compositions, internal structures and atmospheres beyond our solar system. Dome A at Antarctica is a promising site for planetary transit surveys, where the continuous darkness and the large clear-sky fraction in the winter months greatly enhance the detection efficiency. The Chinese Small Telescope ARray and the Antarctic Survey Telescopes are the first facilities that have been operated at Dome A for use in exoplanet surveys. To increase the sky coverage, a low-temperature-resistant wide-field robotic telescope, named the bright star survey telescope (BSST), has been developed to join the ongoing planetary transit survey in Antarctica. The BSST has an aperture size of 300 mm and is equipped with a large-frame 4k x 4k CCD camera to receive starlight from a 3.degrees 4 x 3.degrees 4 field of view. The BSST was operated at Lijiang observatory in April and May 2015 for a test run. Photometric precision of 3.5 mmag was achieved for stars with V similar to 11 mag using 75 s exposures. The transiting events of two Jupiter-size exoplanets, HAT-P-3b and HAT-P-12b, were observed on May 10 and May 20, 2015, respectively.

The 1.2m Quantum Teleportation Telescope imaging system is a multi-band imaging system with dual channels called ‘red end’ and ‘blue end’. Each channel includes a CCD camera and a filter wheel system, and the blue end contains a focusing system. In order to improve the tracking accuracy, the guiding CCD is designed and deployed. The imaging system studies the mass of the black hole and the structure of AGN by observing the variation of AGN spectral line. In order to improve the observation efficiency, we design and implement a multi-level remote unattended observation and control system. The system adopts the framework of combining RTS2 and EPICS. EPICS is used to realize the individual control of each device. We defined status code and split device properties for debugging purpose or high-level invocating purpose. The EPICS Channel Access is integrated into the RTS2 software and a set of configurations in XML format is designed so that the RTS2 module can find the EPICS application. In the RTS2 layer, we developed a module for the coordinated control of the equipment. The module is responsible for sending instructions to the telescope and the guiding module according to the pre-defined list of observation plans, switching to the corresponding filter, and performing exposure operations. Finally, we developed web service and used web pages as user interface, which makes it convenient for users to control the telescope remotely and complete the observation task.

Infrared sky background level is an important parameter of grounded infrared astronomy observations, which should be firstly measured in a good infrared observatory site, and only the site with low background level is suitable for infrared observations. Infrared sky background level can provide background data for the design of related infrared instruments. However, there is no such data available for major sites in China. Based on the requirement, In order to supplement the current site survey data and guide the design of future infrared instruments, a multiband near-infrared sky brightness monitor (MNISBM) based on an InSb sensor is designed in this paper. The MNISBM consists of optical system, mechanical structure and control system, detector and cooler, high gain readout electronic system, operational software. It is completed and carried out an experimental measurement in the laboratory. The result shows that the sensitivity of the MNISBM meets the requirements of the measurement of near-infrared sky background level.

For an unattended telescopes in Antarctic, the remote operation, autonomous observation and control are essential. An EPICS (Experimental Physics and Industrial Control System) and RTS2(Remote Telescope System, 2nd Version) based autonomous observation and control system with remoted operation is introduced in this paper. EPICS is a set of Open Source software tools, libraries and applications developed collaboratively and used worldwide to create distributed soft real-time control systems for scientific instruments while RTS2 is an open source environment for control of a fully autonomous observatory. Using the advantage of EPICS and RTS2 respectively, a combined integrated software framework for autonomous observation and control is established that use RTS2 to fulfill the function of astronomical observation and use EPICS to fulfill the device control of telescope. A command and status interface for EPICS and RTS2 is designed to make the EPICS IOC (Input/Output Controller) components integrate to RTS2 directly. For the specification and requirement of control system of telescope in Antarctic, core components named Executor and Auto-focus for autonomous observation is designed and implemented with remote operation user interface based on Browser-Server mode. The whole system including the telescope is tested in Lijiang Observatory in Yunnan Province for practical observation to complete the autonomous observation and control, including telescope control, camera control, dome control, weather information acquisition with the local and remote operation., Comment: 20 pages,15 figures

A heat preservation system for mechanical shutter in Antarctic is introduced in the paper. The system consists of the heat preservation chamber, the host controller STM32F103C8T6 with peripheral circuit and the control algorithm. The whole design is carried out on the basis of the low temperature requirement, including the cavity structure and thermal insulation. The heat preservation chamber is used to keep the shutter warm and support the weight of the camera. Using PT100 as the temperature sensor, the signal processing circuit converts the temperature to the voltage which is then digitized by the 12 bit ADC in the STM32. The host controller transforms the voltage data into temperature, and through the tuning of the Fussy PID algorithm which controls the duty cycle of the MOSFET, the temperature control of chamber is realized. The System has been tested in the cryogenic environment for a long time, with characteristic of low temperature resistance, small volume, high accuracy of temperature control as well as remote control and detection.

The Fuzzy-PID is combined fuzzy control and PID control, and it can realize the self-adaptive of Kp, Ki and Kd of the PID. So the Fuzzy-PID not only has the advantage of easy to application, strong robust, but also can be more widely used and have higher performance than normal PID. In this paper, we use a new method to design the Fuzzy-PID and apply it in the Scientific CCD camera's shutter heating system. As compared to the normal PID, the Fuzzy-PID algorithm has a better performance on reducing the temperature overshoot, reducing the adjusting time and improving the control accuracy.

The Ngari (Ali) observatory is located in Ngari, Tibet, a region known as “the roof of the roof of the world.” The observatory benefits from abundant photometric nights, low perceptible water vapor, high transmittance, and good seeing. Due to these advantages, it promises to be one of the best locations in the world at which to make infrared and submillimeter observations. However, no data on the sky background radiation at this location are available, impacting the planning of future facilities at the observatory. To remedy this deficiency, a near-infrared sky brightness monitor (NISBM) has been designed to obtain data in the J, H, and Ks bands. This monitor is based on an InGaAs photoelectric diode and uses chopper modulation and digital lock-in amplifier processing, which considerably enhance its signal-to-noise ratio, detectivity, and data acquisition speed. An independent device has been designed for each band (J, H, and Ks) and calibrated in the laboratory. The NISBM was installed at the Ngari observatory in July 2017 and has obtained the first NIR sky brightness data for that location.

Infrared sky background level is an important parameter of infrared astronomy observations from the ground, particularly for a candidate site of an infrared capable observatory since low background level is required for such a site. The Chinese astronomical community is looking for a suitable site for a future 12 m telescope, which is designed for working in both optical and infrared wavelengths. However, none of the proposed sites has been tested for infrared observations. Nevertheless, infrared sky background measurements are also important during the design of infrared observing instruments. Based on the requirement, in order to supplement the current site survey data and guide the design of future infrared instruments, a multiband near-infrared sky brightness monitor (MNISBM) based on an InSb sensor is designed in this paper. The MNISBM consists of an optical system, mechanical structure and control system, detector and cooler, high gain readout electronics, and operational software. It is completed and tested in the laboratory. The results show that the sensitivity of the MNISBM meets the requirements of the measurement of near-infrared sky background level of several well-known astronomical infrared observing sites.

A heating system for the mechanical shutter for the Antarctic Bright Stars Survey Telescope (BSST) is introduced. The system consists of a thermal insulation shutter house and a heating control box. The key design of the thermal-insulation shutter house is introduced. The heating control algorithm based on fuzzy-proportional–integral–derivative is designed to improve the performance of the system. A secure control algorithm for power MOSFET is necessary in extremely cold environments. The system has been tested in the cryogenic environment for 4 weeks, which proved that the heating system has the characteristics of low temperature adaption, high accuracy of the temperature control, remote operation, and detection. As a part of the BSST, the system has been running successfully for over half a year at Zhongshan Station, Antarctica.