Search

Simultaneously transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) provides a promising way to expand coverage in wireless communications. However, limitation of single STAR-RIS inspire us to integrate the concept of multi-hop transmissions, as focused on RIS in existing research. Therefore, we propose the novel architecture of multi-hop STAR-RISs to achieve a wider range of full-plane service coverage. In this paper, we intend to solve active beamforming of the base station and passive beamforming of STAR-RISs, aiming for maximizing the energy efficiency constrained by hardware limitation of STAR-RISs. Furthermore, we investigate the impact of the on-off state of STAR-RIS elements on energy efficiency. To tackle the complex problem, a Multi-Agent Global and locAl deep Reinforcement learning (MAGAR) algorithm is designed. The global agent elevates the collaboration among local agents, which focus on individual learning. In numerical results, we observe the significant improvement of MAGAR compared to the other benchmarks, including Q-learning, multi-agent deep Q network (DQN) with golbal reward, and multi-agent DQN with local rewards. Moreover, the proposed architecture of multi-hop STAR-RISs achieves the highest energy efficiency compared to mode switching based STAR-RISs, conventional RISs and deployment without RISs or STAR-RISs., Comment: Accepted by Proc. IEEE VTC-fall

Reconfigurable intelligent surfaces (RIS) as an effective technique for intelligently manipulating channel paths through reflection to serve desired users. Full-duplex (FD) systems, enabling simultaneous transmission and reception from a base station (BS), offer the theoretical advantage of doubled spectrum efficiency. However, the presence of strong self-interference (SI) in FD systems significantly degrades performance, which can be mitigated by leveraging the capabilities of RIS. In this work, we consider joint BS and RIS beamforming for maximizing the downlink (DL) transmission rate while guaranteeing uplink (UL) rate requirement. We propose an FD-RIS beamforming (FRIS) scheme by adopting penalty convex-concave programming. Simulation results demonstrate the UL/DL rate improvements achieved by considering various levels of imperfect CSI. The proposed FRIS scheme validates their effectiveness across different RIS deployments and RIS/BS configurations. FRIS has achieved the highest rate compared to the other approximation method, conventional beamforming techniques, HD systems, and deployment without RIS., Comment: arXiv admin note: substantial text overlap with arXiv:2306.05693

The requirement of wireless data demands is increasingly high as the sixth-generation (6G) technology evolves. Reconfigurable intelligent surface (RIS) is promisingly deemed to be one of 6G techniques for extending service coverage, reducing power consumption, and enhancing spectral efficiency. In this article, we have provided some fundamentals of RIS deployment in theory and hardware perspectives as well as utilization of artificial intelligence (AI) and machine learning. We conducted an intelligent deployment of RIS (i-Dris) prototype, including dual-band auto-guided vehicle (AGV) assisted RISs associated with an mmWave base station (BS) and a receiver. The RISs are deployed on the AGV with configured incident/reflection angles. While, both the mmWave BS and receiver are associated with an edge server monitoring downlink packets for obtaining system throughput. We have designed a federated multi-agent reinforcement learning scheme associated with several AGV-RIS agents and sub-agents per AGV-RIS consisting of the deployment of position, height, orientation and elevation angles. The experimental results presented the stationary measurement in different aspects and scenarios. The i-Dris can reach up to 980 Mbps transmission throughput under a bandwidth of 100 MHz with comparably low complexity as well as rapid deployment, which outperforms the other existing works. At last, we highlight some opportunities and future issues in leveraging RIS-empowered wireless communication networks.

The joint uplink/downlink (JUD) design of simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) is conceived in support of both uplink (UL) and downlink (DL) users. Furthermore, the dual STAR-RISs (D-STAR) concept is conceived as a promising architecture for 360-degree full-plane service coverage, including UL/DL users located between the base station (BS) and the D-STAR as well as beyond. The corresponding regions are termed as primary (P) and secondary (S) regions. Both BS/users exist in the P-region, but only users are located in the S-region. The primary STAR-RIS (STAR-P) plays an important role in terms of tackling the P-region inter-user interference, the self-interference (SI) from the BS and from the reflective as well as refractive UL users imposed on the DL receiver. By contrast, the secondary STAR-RIS (STAR-S) aims for mitigating the S-region interferences. The non-linear and non-convex rate-maximization problem formulated is solved by alternating optimization amongst the decomposed convex sub-problems of the BS beamformer, and the D-STAR amplitude as well as phase shift configurations. We also propose a D-STAR based active beamforming and passive STAR-RIS amplitude/phase (DBAP) optimization scheme to solve the respective sub-problems by Lagrange dual with Dinkelbach's transformation, alternating direction method of multipliers (ADMM) with successive convex approximation (SCA), and penalty convex-concave procedure (PCCP). Our simulation results reveal that the proposed D-STAR architecture outperforms the conventional single RIS, single STAR-RIS, and half-duplex networks. The proposed DBAP of D-STAR outperforms the state-of-the-art solutions found in the open literature for different numbers of quantization levels, geographic deployment, transmit power and for diverse numbers of transmit antennas, patch partitions as well as D-STAR elements., Comment: Accepted by IEEE TCOM

Wireless indoor localization has attracted significant amount of attention in recent years. Using received signal strength (RSS) obtained from WiFi access points (APs) for establishing fingerprinting database is a widely utilized method in indoor localization. However, the time-variant problem for indoor positioning systems is not well-investigated in existing literature. Compared to conventional static fingerprinting, the dynamicallyreconstructed database can adapt to a highly-changing environment, which achieves sustainability of localization accuracy. To deal with the time-varying issue, we propose a skeleton-assisted learning-based clustering localization (SALC) system, including RSS-oriented map-assisted clustering (ROMAC), cluster-based online database establishment (CODE), and cluster-scaled location estimation (CsLE). The SALC scheme jointly considers similarities from the skeleton-based shortest path (SSP) and the time-varying RSS measurements across the reference points (RPs). ROMAC clusters RPs into different feature sets and therefore selects suitable monitor points (MPs) for enhancing location estimation. Moreover, the CODE algorithm aims for establishing adaptive fingerprint database to alleviate the timevarying problem. Finally, CsLE is adopted to acquire the target position by leveraging the benefits of clustering information and estimated signal variations in order to rescale the weights fromweighted k-nearest neighbors (WkNN) method. Both simulation and experimental results demonstrate that the proposed SALC system can effectively reconstruct the fingerprint database with an enhanced location estimation accuracy, which outperforms the other existing schemes in the open literature.

The sixth-generation (6G) wireless technology recognizes the potential of reconfigurable intelligent surfaces (RIS) as an effective technique for intelligently manipulating channel paths through reflection to serve desired users. Full-duplex (FD) systems, enabling simultaneous transmission and reception from a base station (BS), offer the theoretical advantage of doubled spectrum efficiency. However, the presence of strong self-interference (SI) in FD systems significantly degrades performance, which can be mitigated by leveraging the capabilities of RIS. Moreover, accurately obtaining channel state information (CSI) from RIS poses a critical challenge. Our objective is to maximize downlink (DL) user data rates while ensuring quality-of-service (QoS) for uplink (UL) users under imperfect CSI from reflected channels. To address this, we propose a robust active BS and passive RIS beamforming (RAPB) scheme for RIS-FD, accounting for both SI and imperfect CSI. RAPB incorporates distributionally robust design, conditional value-at-risk (CVaR), and penalty convex-concave programming (PCCP) techniques. Simulation results demonstrate the UL/DL rate improvement are achieved by considering different levels of imperfect CSI. The proposed RAPB schemes validate their effectiveness across different RIS deployments and RIS/BS configurations. Benefited from robust beamforming, RAPB outperforms the existing methods in terms of non-robustness, deployment without RIS, conventional approximation, and half-duplex systems., Comment: some errors found

Terahertz (THz) communication with ultra-wide available spectrum is a promising technique that can achieve the stringent requirement of high data rate in the next-generation wireless networks, yet its severe propagation attenuation significantly hinders its implementation in practice. Finding beam directions for a large-scale antenna array to effectively overcome severe propagation attenuation of THz signals is a pressing need. This paper proposes a novel approach of federated deep reinforcement learning (FDRL) to swiftly perform THz-beam search for multiple base stations (BSs) coordinated by an edge server in a cellular network. All the BSs conduct deep deterministic policy gradient (DDPG)-based DRL to obtain THz beamforming policy with limited channel state information (CSI). They update their DDPG models with hidden information in order to mitigate inter-cell interference. We demonstrate that the cell network can achieve higher throughput as more THz CSI and hidden neurons of DDPG are adopted. We also show that FDRL with partial model update is able to nearly achieve the same performance of FDRL with full model update, which indicates an effective means to reduce communication load between the edge server and the BSs by partial model uploading. Moreover, the proposed FDRL outperforms conventional non-learning-based and existing non-FDRL benchmark optimization methods.

Device-free human presence detection is a crucial technology for various applications, including home automation, security, and healthcare. While camera-based systems have traditionally been used for this purpose, they raise privacy concerns. To address this issue, recent research has explored the use of wireless channel state information (CSI) extracted from commercial WiFi access points (APs) to provide detailed channel characteristics. In this paper, we propose a device-free human presence detection system for multi-room scenarios using a time-selective conditional dual feature extract recurrent network (TCD-FERN). Our system is designed to capture significant time features on current human features using a dynamic and static data preprocessing technique. We extract both moving and spatial features of people and differentiate between line-of-sight (LoS) and non-line-of-sight (NLoS) cases. Subcarrier fusion is carried out in order to provide more objective variation of each sample while reducing the computational complexity. A voting scheme is further adopted to mitigate the feature attenuation problem caused by room partitions, with around 3% improvement of human presence detection accuracy. Experimental results have revealed the significant improvement of leveraging subcarrier fusion, dual-feature recurrent network, time selection and condition mechanisms. Compared to the existing works in open literature, our proposed TCD-FERN system can achieve above 97% of human presence detection accuracy for multi-room scenarios with the adoption of fewer WiFi APs., Comment: Accepted by IEEE Transactions on Instrumentation & Measurement

Accurate detection of human presence in indoor environments is important for various applications, such as energy management and security. In this paper, we propose a novel system for human presence detection using the channel state information (CSI) of WiFi signals. Our system named attention-enhanced deep learning for presence detection (ALPD) employs an attention mechanism to automatically select informative subcarriers from the CSI data and a bidirectional long short-term memory (LSTM) network to capture temporal dependencies in CSI. Additionally, we utilize a static feature to improve the accuracy of human presence detection in static states. We evaluate the proposed ALPD system by deploying a pair of WiFi access points (APs) for collecting CSI dataset, which is further compared with several benchmarks. The results demonstrate that our ALPD system outperforms the benchmarks in terms of accuracy, especially in the presence of interference. Moreover, bidirectional transmission data is beneficial to training improving stability and accuracy, as well as reducing the costs of data collection for training. To elaborate a little further, we have also evaluated the potential of ALPD for detecting more challenging human activities in multi-rooms. Overall, our proposed ALPD system shows promising results for human presence detection using WiFi CSI signals., Comment: Accepted by IEEE Sensors Journal

Wi-Fi channel state information (CSI) has become a promising solution for non-invasive breathing and body motion monitoring during sleep. Sleep disorders of apnea and periodic limb movement disorder (PLMD) are often unconscious and fatal. The existing researches detect abnormal sleep disorders in impractically controlled environments. Moreover, it leads to compelling challenges to classify complex macro- and micro-scales of sleep movements as well as entangled similar waveforms of cases of apnea and PLMD. In this paper, we propose the attention-based learning for sleep apnea and limb movement detection (ALESAL) system that can jointly detect sleep apnea and PLMD under different sleep postures across a variety of patients. ALESAL contains antenna-pair and time attention mechanisms for mitigating the impact of modest antenna pairs and emphasizing the duration of interest, respectively. Performance results show that our proposed ALESAL system can achieve a weighted F1-score of 84.33, outperforming the other existing non-attention based methods of support vector machine and deep multilayer perceptron.

The demand for device-free indoor localization using commercial Wi-Fi devices has rapidly increased in various fields due to its convenience and versatile applications. However, random frequency offset (RFO) in wireless channels poses challenges to the accuracy of indoor localization when using fluctuating channel state information (CSI). To mitigate the RFO problem, an error vector spectrum (EVS) is conceived thanks to its higher resolution of signal and robustness to RFO. To address these challenges, this paper proposed a novel error vector assisted learning (EVAL) for device-free indoor localization. The proposed EVAL scheme employs deep neural networks to classify the location of a person in the indoor environment by extracting ample channel features from the physical layer signals. We conducted realistic experiments based on OpenWiFi project to extract both EVS and CSI to examine the performance of different device-free localization techniques. Experimental results show that our proposed EVAL scheme outperforms conventional machine learning methods and benchmarks utilizing either CSI amplitude or phase information. Compared to most existing CSI-based localization schemes, a new paradigm with higher positioning accuracy by adopting EVS is revealed by our proposed EVAL system.

Channel State Information (CSI) is widely adopted as a feature for indoor localization. Taking advantage of the abundant information from the CSI, people can be accurately sensed even without equipped devices. However, the positioning error increases severely in non-line-of-sight (NLoS) regions. Reconfigurable intelligent surface (RIS) has been introduced to improve signal coverage in NLoS areas, which can re-direct and enhance reflective signals with massive meta-material elements. In this paper, we have proposed a Transformer-based RIS-assisted device-free sensing for joint people counting and localization (WiRiS) system to precisely predict the number of people and their corresponding locations through configuring RIS. A series of predefined RIS beams is employed to create inputs of fingerprinting CSI features as sequence-to-sequence learning database for Transformer. We have evaluated the performance of proposed WiRiS system in both ray-tracing simulators and experiments. Both simulation and real-world experiments demonstrate that people counting accuracy exceeds 90\%, and the localization error can achieve the centimeter-level, which outperforms the existing benchmarks without employment of RIS.

The innovation of Wi-Fi 6, IEEE 802.11ax, was be approved as the next sixth-generation (6G) technology of wireless local area networks (WLANs) by improving the fundamental performance of latency, throughput, and so on. The main technical feature of orthogonal frequency division multiple access (OFDMA) supports multi-users to transmit respective data concurrently via the corresponding access points (APs). However, the conventional IEEE 802.11 protocol for Wi-Fi roaming selects the target AP only depending on received signal strength indication (RSSI) which is obtained by the received Response frame from the APs. In the long term, it may lead to congestion in a single channel under the scenarios of dense users further increasing the association delay and packet drop rate, even reducing the quality of service (QoS) of the overall system. In this paper, we propose a multi-agent deep Q-learning for fast roaming (MADAR) algorithm to effectively minimize the latency during the station roaming for Smart Warehouse in Wi-Fi 6 system. The MADAR algorithm considers not only RSSI but also channel state information (CSI), and through online neural network learning and weighting adjustments to maximize the reward of the action selected from Epsilon-Greedy. Compared to existing benchmark methods, the MADAR algorithm has been demonstrated for improved roaming latency by analyzing the simulation result and realistic dataset.

Low-Earth orbit (LEO) satellites have been prosperously deployed for various Earth observation missions due to its capability of collecting a large amount of image or sensor data. However, traditionally, the data training process is performed in the terrestrial cloud server, which leads to a high transmission overhead. With the recent development of LEO, it is more imperative to provide ultra-dense LEO constellation with enhanced on-board computation capability. Benefited from it, we have proposed a collaborative federated learning for low Earth orbit (FELLO). We allocate the entire process on LEOs with low payload inter-satellite transmissions, whilst the low-delay terrestrial gateway server (GS) only takes care for initial signal controlling. The GS initially selects an LEO server, whereas its LEO clients are all determined by clustering mechanism and communication capability through the optical inter-satellite links (ISLs). The re-clustering of changing LEO server will be executed once with low communication quality of FELLO. In the simulations, we have numerically analyzed the proposed FELLO under practical Walker-based LEO constellation configurations along with MNIST training dataset for classification mission. The proposed FELLO outperforms the conventional centralized and distributed architectures with higher classification accuracy as well as comparably lower latency of joint communication and computing.

The open radio access network (O-RAN) architecture offers a cost-effective and scalable solution for internet service providers to optimize their networks using machine learning algorithms. The architecture's open interfaces enable network function virtualization, with the O-RAN serving as the primary communication device for users. However, the limited frequency resources and information explosion make it difficult to achieve an optimal network experience without effective traffic control or resource allocation. To address this, we consider mobility-aware load balancing to evenly distribute loads across the network, preventing network congestion and user outages caused by excessive load concentration on open radio unit (O-RU) governed by a single open distributed unit (O-DU). We have proposed a multi-agent multi-armed bandit for load balancing and resource allocation (mmLBRA) scheme, designed to both achieve load balancing and improve the effective sum-rate performance of the O-RAN network. We also present the mmLBRA-LB and mmLBRA-RA sub-schemes that can operate independently in non-realtime RAN intelligent controller (Non-RT RIC) and near-RT RIC, respectively, providing a solution with moderate loads and high-rate in O-RUs. Simulation results show that the proposed mmLBRA scheme significantly increases the effective network sum-rate while achieving better load balancing across O-RUs compared to rule-based and other existing heuristic methods in open literature.

Low Earth orbit (LEO) satellite constellation is capable of providing global coverage area with high-rate services in the next sixth-generation (6G) non-terrestrial network (NTN). Due to limited onboard resources of operating power, beams, and channels, resilient and efficient resource management has become compellingly imperative under complex interference cases. However, different from conventional terrestrial base stations, LEO is deployed at considerable height and under high mobility, inducing substantially long delay and interference during transmission. As a result, acquiring the accurate channel state information between LEOs and ground users is challenging. Therefore, we construct a framework with a two-way transmission under unknown channel information and no data collected at long-delay ground gateway. In this paper, we propose hierarchical multi-agent multi-armed bandit resource allocation for LEO constellation (mmRAL) by appropriately assigning available radio resources. LEOs are considered as collaborative multiple macro-agents attempting unknown trials of various actions of micro-agents of respective resources, asymptotically achieving suitable allocation with only throughput information. In simulations, we evaluate mmRAL in various cases of LEO deployment, serving numbers of users and LEOs, hardware cost and outage probability. Benefited by efficient and resilient allocation, the proposed mmRAL system is capable of operating in homogeneous or heterogeneous orbital planes or constellations, achieving the highest throughput performance compared to the existing benchmarks in open literature.

With increasing application of frequency-modulated continuous wave (FMCW) radars in autonomous vehicles, mutual interference among FMCW radars poses a serious threat. Through this paper, we present a novel approach to effectively and elegantly suppress mutual interference in FMCW radars. We first decompose the received signal into modes using variational mode decomposition (VMD) and perform time-frequency analysis using Fourier synchrosqueezed transform (FSST). The interference-suppressed signal is then reconstructed by applying a proposed energy-entropy-based thresholding operation on the time-frequency spectra of VMD modes. The effectiveness of proposed method is measured in terms of signal-to-interference plus noise ratio (SINR) and correlation coefficient for both simulated and experimental automotive radar data in the presence of FMCW interference. Compared to other existing literature, our proposed method demonstrates significant improvement in the output SINR by at least 14.07 dB for simulated data and 9.87 dB for experimental data.

In recent years, indoor human presence detection based on supervised learning (SL) and channel state information (CSI) has attracted much attention. However, existing studies that rely on spatial information of CSI are susceptible to environmental changes which degrade prediction accuracy. Moreover, SL-based methods require time-consuming data labeling for retraining models. Therefore, it is imperative to design a continuously monitored model using a semi-supervised learning (SSL) based scheme. In this paper, we conceive a bifold teacher-student (BTS) learning approach for indoor human presence detection in an adjoining two-room scenario. The proposed SSL-based primal-dual teacher-student network intelligently learns spatial and temporal features from labeled and unlabeled CSI datasets. Additionally, the enhanced penalized loss function leverages entropy and distance measures to distinguish drifted data, i.e., features of new datasets affected by time-varying effects and altered from the original distribution. Experimental results demonstrate that the proposed BTS system sustains asymptotic accuracy after retraining the model with unlabeled data. Furthermore, BTS outperforms existing SSL-based models in terms of the highest detection accuracy while achieving the asymptotic performance of SL-based methods.

Whilst the fifth-generation (5G) systems are being rolled out across the globe, researchers have turned their attention to the exploration of radical next-generation solutions. At this early evolutionary stage we survey five main research facets of this field, namely {\em Facet~1: next-generation architectures, spectrum and services, Facet~2: next-generation networking, Facet~3: Internet of Things (IoT), Facet~4: wireless positioning and sensing, as well as Facet~5: applications of deep learning in 6G networks.} In this paper, we have provided a critical appraisal of the literature of promising techniques ranging from the associated architectures, networking, applications as well as designs. We have portrayed a plethora of heterogeneous architectures relying on cooperative hybrid networks supported by diverse access and transmission mechanisms. The vulnerabilities of these techniques are also addressed and carefully considered for highlighting the most of promising future research directions. Additionally, we have listed a rich suite of learning-driven optimization techniques. We conclude by observing the evolutionary paradigm-shift that has taken place from pure single-component bandwidth-efficiency, power-efficiency or delay-optimization towards multi-component designs, as exemplified by the twin-component ultra-reliable low-latency mode of the 5G system. We advocate a further evolutionary step towards multi-component Pareto optimization, which requires the exploration of the entire Pareto front of all optiomal solutions, where none of the components of the objective function may be improved without degrading at least one of the other components.

In recent years, the demand for pervasive smart services and applications has increased rapidly. Device-free human detection through sensors or cameras has been widely adopted, but it comes with privacy issues as well as misdetection for motionless people. To address these drawbacks, channel state information (CSI) captured from commercialized Wi-Fi devices provides rich signal features for accurate detection. However, existing systems suffer from inaccurate classification under a non-line-of-sight (NLoS) and stationary scenario, such as when a person is standing still in a room corner. In this work, we propose a system called CRONOS (Colorization and Contrastive Learning Enhanced NLoS Human Presence Detection), which generates dynamic recurrence plots (RPs) and color-coded CSI ratios to distinguish mobile and stationary people from vacancy in a room, respectively. We also incorporate supervised contrastive learning to retrieve substantial representations, where consultation loss is formulated to differentiate the representative distances between dynamic and stationary cases. Furthermore, we propose a self-switched static feature enhanced classifier (S3FEC) to determine the utilization of either RPs or color-coded CSI ratios. Our comprehensive experimental results show that CRONOS outperforms existing systems that either apply machine learning or non-learning based methods, as well as non-CSI based features in open literature. CRONOS achieves the highest human presence detection accuracy in vacancy, mobility, line-of-sight (LoS), and NLoS scenarios., Comment: Accepted by IEEE IoT-J

In this paper, we consider a prospective receiving hybrid beamforming structure consisting of several radio frequency (RF) chains and abundant antenna elements in multi-input multi-output (MIMO) systems. Due to conventional costly full connections, we design an enhanced partially connected beamformer employing a low-density parity-check (LDPC)-based structure. As a benefit of the LDPC-based structure, information can be exchanged among clustered RF/antenna groups, which results in a low computational complexity order. Advanced message passing (MP) capable of inferring and transferring information among different paths is designed to support the LDPC-based hybrid beamformer. We propose a message-passing enhanced antenna and RF chain selection (MARS) scheme for minimizing the operational power of antennas and RF chains of the receiver as well as hybrid beamforming. Furthermore, sequential and parallel MP schemes for MARS are designed, namely, MARS-S and MARS-P, respectively, to address the convergence speed issue. A heuristic genetic algorithm is designed for receiving hybrid beamforming, comprising gene generation initialization, elite selection, crossover, and mutation. Simulations validate the convergence of both the MARS-P and the MARS-S algorithms. Due to the asynchronous information transfer of MARS-P, it requires higher power than MARS-S, which strikes a compelling balance among power consumption, convergence, and computational complexity. It is also demonstrated that the proposed MARS scheme outperforms the existing benchmarks using the heuristic method of fully/partially connected architectures in the open literature by requiring the lowest power and realizing the highest energy efficiency., Comment: Accepted by IEEE TCOM

Substantially increasing wireless traffic and extending serving coverage is required with the advent of sixth-generation (6G) wireless communication networks. Reconfigurable intelligent surface (RIS) is widely considered as a promising technique which is capable of improving the system sum rate and energy efficiency. Moreover, full-duplex (FD) multi-input-multi-output (MIMO) transmission provides simultaneous transmit and received signals, which theoretically provides twice of spectrum efficiency. However, the self-interference (SI) in FD system is a challenging task requiring high-overhead cancellation, which can be resolved by configuring appropriate phase shifts of RIS. This paper has proposed an RIS-empowered full-duplex interference cancellation (RFIC) scheme in order to alleviate the severe interference in an RIS-FD system. We consider the interference minimization of RIS-FD MIMO while guaranteeing quality-of-service (QoS) of whole system. The closed-form solution of RIS phase shifts is theoretically derived with the discussion of different numbers of RIS elements and receiving antennas. Simulation results reveal that the proposed RFIC scheme outperforms existing benchmarks with more than 50% of performance gain of sum rate.

With explosively escalating service demands, beyond fifth generation (B5G) aims to realize various requirements for multi-service networks, i.e., higher performance of mixed enhanced mobile broadband (eMBB) and ultra-reliable low-latency communication (URLLC) services than 5G. To flexibly serve diverse traffic, various functional split options (FSOs) are specified by 5G protocols enabling different network functions. In order to improve signal qualities for edge users, we consider FSO-based coordinated multi-point (CoMP) transmission as a prominent technique capable of supporting high traffic demands. However, due to conventional confined hardware processing capability, a processor sharing (PS) model is introduced to deal with high latency for multi-service FSO-based networks. Therefore, it becomes essential to assign CoMP-enhanced functional split modes under PS model. A more tractable FSO-based network in terms of ergodic rate and reliability is derived by stochastic geometry approach. Moreover, we have proposed CoMP-enhanced functional split mode allocation (CFSMA) scheme to adaptively assign FSOs to provide enhanced mixed throughput and latency-aware services. The simulation results have validated analytical derivation and demonstrated that the proposed CFSMA scheme optimizes system spectrum efficiency while guaranteeing stringent latency requirement. The proposed CFSMA scheme with the designed PS FFS-CoMP system outperforms the benchmarks of conventional FCFS scheduling, non-FSO network, fixed FSOs, and limited available FSO selections in open literature.

With proliferation of fifth generation (5G) new radio (NR) technology, it is expected to meet the requirement of diverse traffic demands. We have designed a coordinated multi-point (CoMP) enhanced flexible multi-numerology (MN) for 5G-NR networks to improve the network performance in terms of throughput and latency. We have proposed a CoMP enhanced joint subcarrier and power allocation (CESP) scheme which aims at maximizing sum rate under the considerations of transmit power limitation and guaranteed quality-of-service (QoS) including throughput and latency restrictions. By employing difference of two concave functions (D.C.) approximation and abstract Lagrangian duality method, we theoretically transform the original non-convex nonlinear problem into a solvable maximization problem. Moreover, the convergence of our proposed CESP algorithm with D.C. approximation is analytically derived with proofs, and is further validated via numerical results. Simulation results demonstrated that our proposed CESP algorithm outperforms the conventional non-CoMP and single numerology mechanisms along with other existing benchmarks in terms of lower latency and higher throughput under the scenarios of uniform and edge users.

To alleviate green house effect, high network energy efficiency (EE) has increasingly become an important research target in wireless green communications. Therefore, the investigation for resource management to mitigate the co-tier interference in the small cell network (SCN) is provided. Moreover, with the merits of cloud radio access network (C-RAN), small cell base stations (SBSs) can be decomposed of a central small cell (CSC) and remote small cells (RSCs). To achieve the coordination, the split medium access control (MAC) based functional splitting is adopted with scheduler deployed at CSCs and retransmission functions left at RSCs. However, limited fronthaul has a compelling impact at RSCs due to requirements of user quality-of-service (QoS). Accordingly, a traffic control-based user association and resource allocation (TURA) scheme is proposed for a centralized resource management. To deal with the infeasibility to control all RSCs by CSC, we propose a hybrid controlled user and resource management (HARM) scheme. A CSC performs TURA for RSCs to mitigate intra-group interference within localized C-RANs, whereas the CSCs among separate C-RANs conduct cooperative resource competition (CRC) game for alleviating inter-group interference. Based on regret-based learning algorithm, the proposed schemes are analytically proved to reach the correlated equilibrium (CE). Simulation results have validated the effect of traffic control in TURA scheme and the convergence of CRC. Moreover, the comparison of the proposed TURA, HARM, and CRC schemes with the benchmark is revealed. It is observed that the TURA scheme outperforms the other schemes under ideal fronthaul control, whilst the proposed HARM scheme can sustain EE performance considering feasible implementation.

This paper presents a novel approach to conduct highly efficient federated learning (FL) over a massive wireless edge network, where an edge server and numerous mobile devices (clients) jointly learn a global model without transporting the huge amount of data collected by the mobile devices to the edge server. The proposed FL approach is referred to as spatio-temporal FL (STFL), which jointly exploits the spatial and temporal correlations between the learning updates from different mobile devices scheduled to join STFL in various training epochs. The STFL model not only represents the realistic intermittent learning behavior from the edge server to the mobile devices due to data delivery outage, but also features a mechanism of compensating loss learning updates in order to mitigate the impacts of intermittent learning. An analytical framework of STFL is proposed and employed to study the learning capability of STFL via its convergence performance. In particular, we have assessed the impact of data delivery outage, intermittent learning mitigation, and statistical heterogeneity of datasets on the convergence performance of STFL. The results provide crucial insights into the design and analysis of STFL-based wireless networks., Comment: 3 figures, conference