Search

We proposed a far-infrared tunable metamaterial absorber using vanadium dioxide (VO2) and graphene as controlling materials. The properties of the absorber are investigated theoretically using the finite-difference time-domain (FDTD) technique. It was found that when the Fermi energy level of graphene is fixed at zero, VO2 is in the insulated state, and the metasurface exhibits far-infrared broadband absorption performance, with absorptance exceeding 90% in the wavelength range of 12.6 μm to 23.2 μm. In addition, by elevating the Fermi energy level of graphene, the absorption bandwidth of the device is expanded continuously. When the VO2 is in the metallic state, the device can flexibly transform into a far-infrared narrowband absorber. The device also has the advantage of being insensitive to changes in polarization and incident angle. The origin of the absorption and the tuning principle of the device were analyzed and verified successfully by using an equivalent circuit model (ECM). Besides, we also studied the refraction index sensing characteristics of the absorber. Surprisingly, the absorber exhibits excellent sensing characteristics, and its sensitivity (S) reaches 14.108 μm per RIU and the figure of merit (FOM) is 6.13 per RIU. [ABSTRACT FROM AUTHOR]

Frost forms on the surfaces of air source heat pump (ASHP) outdoor heat exchangers under heating mode in winter, when the surface temperature of the heat exchanger is lower than both 0°C and the ambient dew point temperature. This can reduce the coefficient of performance (COP) and heating capacity of the ASHP unit. A novel ASHP was examined using two rooms with the same size, orientation, and structure. To test the frost suppression performance of the novel system, two ASHPs of the same size and specifications, but one including a sensible-heat preheating device, were placed in the test platform rooms. By comparing and analyzing field-measured parameters such as COP, heat loss, and frost weight of the two ASHP units, the frost suppression performance of the novel ASHP was evaluated in severe, moderate, and mild frost areas. The results show that when the air conditions were −3.9°C and 98.7% in the moderate frost area and 3.2°C and 96.7% in the severe frost area, the novel ASHP showed significantly improved performance. The frost formation time increased from 25 min to 38.5 min, frost-defrost heat loss decreased by 31.6%–43.7%, frost weight decreased 11.8%–17.4%, and COP increased 7.4%–13.1% compared with those of the conventional ASHP. In the low temperature and mild frost area, when the air temperature was −11.8°C and the relative humidity was 88.8%, the frost suppression effect of the novel ASHP was unapparent. Practical application : Affected by the climate, the operation performance of ASHP will be different. Different ASHP can be used to adapt to the weather in different regions. The novel ASHP can significantly suppress frost and improve the heating performance of the unit in the mild climate and frost serious areas. [ABSTRACT FROM AUTHOR]

In this paper, we design a solar absorber based on the Si3N4–W–Ti–SiO2 insulator–metal–insulator structure and demonstrate it using the finite difference time domain (FDTD) method. The absorption rate of the absorber consisting of a multi-layer structure with cross etching is over 90% in the bandwidth of 500 nm to 2995 nm with an average absorption rate of 98.3%. There are three peaks at 620 nm, 1002 nm and 1761 nm with peak heights of 99.8%, 99.8% and 99.0%, respectively. By analyzing the distribution of electric and magnetic fields in different sections of the absorber, it is found that the physical mechanism of the structure with high absorptivity is due to the interaction of propagating surface plasmon resonance and local surface plasma resonance. The effects of different structural parameters and the angle of incidence of a light source on the absorber absorption are discussed. The absorber can be used in solar thermal systems, thermal photovoltaics and thermoelectronic devices. [ABSTRACT FROM AUTHOR]

We proposed a far-infrared tunable metamaterial absorber using vanadium dioxide (VO 2 ) and graphene as controlling materials. The properties of the absorber are investigated theoretically using the finite-difference time-domain (FDTD) technique. It was found that when the Fermi energy level of graphene is fixed at zero, VO 2 is in the insulated state, and the metasurface exhibits far-infrared broadband absorption performance, with absorptance exceeding 90% in the wavelength range of 12.6 μm to 23.2 μm. In addition, by elevating the Fermi energy level of graphene, the absorption bandwidth of the device is expanded continuously. When the VO 2 is in the metallic state, the device can flexibly transform into a far-infrared narrowband absorber. The device also has the advantage of being insensitive to changes in polarization and incident angle. The origin of the absorption and the tuning principle of the device were analyzed and verified successfully by using an equivalent circuit model (ECM). Besides, we also studied the refraction index sensing characteristics of the absorber. Surprisingly, the absorber exhibits excellent sensing characteristics, and its sensitivity ( S ) reaches 14.108 μm per RIU and the figure of merit (FOM) is 6.13 per RIU.