Search

The textured design of amorphous carbon (a-C) film can significantly improve the tribological performance and service life of moving mechanical components. However, its friction dependence on different texture shapes, especially under different load conditions, remains unclear. In particular, due to the lack of information regarding the friction interface, the underlying friction mechanism has still not been unveiled. Therefore, the effects of contact pressure and textured shapes on the tribological behavior of a-C films under dry friction conditions were comparatively studied in this work by reactive molecular dynamics simulation. The results show that under low contact pressure, the tribological property of a-C film is sensitive to the textured shape, and the system with a circular textured surface exhibits a lower friction coefficient than that with a rectangular textured surface, which is attributed to the small fraction of unsaturated bonds. However, the increase of contact pressure results in the serious reconstruction and passivation of the friction interface. On the one hand, this induces a growth rate of friction force that is much smaller than that of the normal load, which is followed by a significant decrease in the friction coefficient with contact pressure. On the other hand, the destruction or even disappearance of the textured structure occurs, weakening the difference in the friction coefficient caused by different textured shapes of the a-C surface. These results reveal the friction mechanism of textured a-C film and provide a new way to functionalize the a-C as a protective film for applications in hard disks, MEMS, and NEMS. [ABSTRACT FROM AUTHOR]

The roller is an important part of the belt conveyor used in coal transportation. Due to the harsh environment of coal mines, the rollers are in a state of high load and high friction for a long time, which causes wear failure and has a serious impact on the reliability and safety of the equipment. In order to prepare roller material with excellent bearing performance and friction performance, CF/PUE composites were prepared by pouring method with polyurethane as the matrix and carbon fiber as reinforcement. Due to the low surface activity of unmodified carbon fibers and poor bonding performance with the matrix, MoS2 was generated on the surface of carbon fiber by the in situ generation method in this paper. It was found that the mechanical properties of MoS2/CF/PUE composites were better when the CF content was 0.3 wt%. The Shore hardness reached 92.2 HA, which is 10% higher than pure polyurethane. The tensile strength was 38.44 MPa, which is 53% higher than pure polyurethane. The elongation at break was 850%, which is 16% higher than pure polyurethane. The maximum compressive stress was 2.32 MPa, which is 42% higher than pure polyurethane. The friction coefficient was much lower than that of pure PUE composites, the friction coefficient was 0.284, which is 59% lower than pure polyurethane. [ABSTRACT FROM AUTHOR]

Human articular cartilage, a nonlinear, viscoelastic solid-liquid biphasic tissue, has different mechanical properties and undertakes different functions in different layer. The compression deformation and fatigue damage mechanism of each layer of cartilage is also different when in injury. Compression properties of cartilage can predict cartilage integrity and the likelihood of osteoarthritis. Therefore, the confined and unconfined compression of cartilage is taken to systematically study the dynamic mechanical properties of each layer and reveal the relationship between the dynamic mechanical properties of each cartilage layer and the function of the corresponding cartilage layer. Under confined and unconfined compression conditions, the larger the cyclic loading rate, the greater the deformation rate of each layer. In addition, under the same cyclic loading rate, the superficial layer had the highest deformation rate, followed by the middle layer and the deep layer, which indicates that the deep layer mainly assumes the compression load. Furthermore, under the same loading displacement, the loading stress of cartilage and the deformation rate of each layer in confined compression were greater than those in unconfined compression. Simultaneously, with the increase in the number of loading cycles, the deformation rate in different layers increased first and then stabilized. [ABSTRACT FROM AUTHOR]

The complex movement of artificial joints is closely related to the wear mechanism of the prosthesis material, especially for the polymer prosthesis, which is sensitive to motion paths. In this paper, the "soft-soft" all-polymer of XLPE/PEEK are selected to study the influence of motion paths on the friction and wear performance. Based on the periodic characteristics of friction coefficient and wear morphology, this paper reveals the friction and wear mechanism of XLPE/peek under multi-directional motion path, and obtains the quantitative relationship between friction coefficient and the aspect ratios of "∞"-shape motion path, which is of great significance to reveal and analyze the wear mechanism of "soft" all-polymer under multi-directional motion path. The results show that the friction coefficient is affected by the motion paths and have periodicity. Morever, under the multi-directional motion paths, the wear of PEEK are mainly abrasive wear and adhesive wear due to the cross shear effect, while the wear of XLPE is mainly abrasive wear with plastic accumulation. In addition, the friction coefficient is greatly affected the aspect ratios Rs-l of "∞"-shape and loads. Meanwhile, the wear morphologies are greatly affected by the aspect ratios Rs-l of "∞"-shape, but less affected by loads. [ABSTRACT FROM AUTHOR]