Search

Per- and polyfluoroalkyl substances (PFAS) make up a diverse group of industrially derived organic chemicals that are of significant concern due to their detrimental effects on human health and ecosystems. Although other technologies are available for removing PFAS, adsorption remains a viable and effective method. Accordingly, the current study reported a novel type of graphene oxide (GO)-based adsorbent and tested their removal performance toward removing PFAS from water. Among the eight adsorbents tested, GO modified by a cationic surfactant, cetyltrimethylammonium chloride (CTAC), GO-CTAC was found to be the best, showing an almost 100% removal for all 11 PFAS tested. The adsorption kinetics were best described by the pseudo-second-order model, indicating rapid adsorption. The isotherm data were well supported by the Toth model, suggesting that PFAS adsorption onto GO-CTAC involved complex interactions. Detailed characterization using scanning electron microscopy-energy dispersive X-ray spectroscopy, Fourier transform infrared, thermogravimetric analysis, X-ray diffraction, and X-ray photoelectron spectroscopy confirmed the proposed adsorption mechanisms, including electrostatic and hydrophobic interactions. Interestingly, the performance of GO-CTAC was not influenced by the solution pH, ionic strength, or natural organic matter. Furthermore, the removal efficiency of PFAS at almost 100% in river water demonstrated that GO-CTAC could be a suitable adsorbent for capturing PFAS in real surface water., Competing Interests: The authors declare no competing financial interest., (© 2024 The Authors. Published by American Chemical Society.)

The extensive use of per- and polyfluoroalkyl substances (PFAS) in many industrial and consumer contexts, along with their persistent nature and possible health hazards, has led to their recognition as a prevalent environmental issue. While various PFAS removal methods exist, adsorption remains a promising, cost-effective approach. This study evaluated the PFAS adsorption performance of a surfactant-modified clay by comparing it with commercial clay-based adsorbents. Furthermore, the impact of environmental factors, including pH, ionic strength, and natural organic matter, on PFAS adsorption by the modified clay (MC) was evaluated. After proving that the MC was regenerable and reusable, magnetic modified clay (MMC) was synthesized, characterized, and tested for removing a wide range of PFAS in pure water and snowmelt. The MMC was found to have similar adsorption performance as the MC and was able to remove > 90% of the PFAS spiked to the snowmelt. The superior and much better performance of the MMC than powdered activated carbon points to its potential use in removing PFAS from real water matrices at an industrial scale., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Controlling solid electrolyte interphase (SEI) in batteries is crucial for their efficient cycling. Herein, we demonstrate an approach to enable robust battery performance that does not rely on high fractions of fluorinated species in electrolytes, thus substantially decreasing the environmental footprint and cost of high-energy batteries. In this approach, we use very low fractions of readily reducible fluorinated cations in electrolyte (∼0.1 wt%) and employ electrostatic attraction to generate a substantial population of these cations at the anode surface. As a result, we can form a robust fluorine-rich SEI that allows for dendrite-free deposition of dense Li and stable cycling of Li-metal full cells with high-voltage cathodes. Our approach represents a general strategy for delivering desired chemical species to battery anodes through electrostatic attraction while using minute amounts of additive., Competing Interests: The authors have a patent (US patent provisional application number 63398320) related to the electrolytes described in this article., (This journal is © The Royal Society of Chemistry.)

One of the iconic characteristics of metal-organic frameworks (MOFs) is the possesssion of guest-accessible pores. Increasing pore size has a direct and often beneficial impact on a MOF's adsorption and separation properties. However, as pore size increases, the resulting void spaces are often filled by interpenetrated frameworks, where one or more networks crystallize within the pore system of another identical network, reducing the MOF's free volume and pore size. Furthermore, due to the thermodynamic favorability of interpenetration during solvothermal synthesis, techniques to synthetically differentiate interpenetrated from non-interpenetrated MOFs are paramount. This study reports the synthesis of deinterpenetrated IRMOF-9 via halide mediated deinterpenetrative conversion of Zn 4 O-derived IRMOF-9. IRMOF-9, when treated with ethylammonium bromide, is quasi-selectively etched, revealing the non-interpenetrated analogue, IRMOF-10 (deinterpenetrated IRMOF-9), which can be isolated prior to complete dissolution by the bromide solution. Dye adsorption, surface area and pore size distribution analysis, and powder X-ray diffraction are consistent with successful deinterpenetration., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Post-synthetic modification (PSM) imparts additional functionality to metal-organic frameworks (MOFs) that is often difficult to access using solvothermal synthesis. As such, expanding the repertory of PSM reactions available to the practitioner is of increased importance for the generation of materials tailored for desired applications. Herein, a method is described for the protecting group-free installation of diverse functional groups within the pores of a MIL-53(Al) analogue via disulfide bond formation. The majority of the reactions proceed with thiol-to-disulfide conversions ranging from high to nearly quantitative. The disulfide bonds are stable in various solvents and can be cleaved in the presence of a reducing agent., (© 2023 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Green, renewable, and sustainable materials are needed for removing per- and polyfluoroalkyl substances (PFASs) in water. Herein, we synthesized and tested alginate (ALG) and chitosan (CTN) based and polyethyleneimine (PEI) functionalized fibers/aerogels for the adsorption of mixtures of 12 PFASs (9 short- and long-chain PFAAs, GenX, and 2 precursors) from water at an initial concentration of 10 μg/L each. Out of 11 biosorbents, ALGPEI-3 and GTH CTNPEI aerogels had the best sorption performance. Through detailed characterization of the sorbents before and after PFASs sorption, it was revealed that hydrophobic interaction was the dominant mechanism controlling PFASs sorption while electrostatic interactions played a minor role. As a result, both aerogels had fast and superior sorption of relatively hydrophobic PFASs from pH 2 to 10. Even at extreme pH conditions, the aerogels retained their shape perfectly. Based upon the isotherms, the maximum adsorption capacity of ALGPEI-3 and GTH-CTNPEI aerogels towards total PFASs removal was 3045 and 12,133 mg/g, respectively. Although the sorption performance of the GTH-CTNPEI aerogel toward short chain PFAS was less than satisfactory and varied between 70 and 90% in 24 h, it may find its use in removing relatively hydrophobic PFAS at high concentrations in complex and extreme environments., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Ltd. All rights reserved.)

We show here that non-network metallopolymers can possess intrinsic microporosity stemming from contortion introduced by metallocene building blocks. Metallopolymers constructed from ferrocenyl building blocks linked by phenyldiacetylene bridges are synthesized and possess BET surface areas up to 400 m 2 g -1 . As solubility imparted by pendant groups reduces porosity, copolymerization is used to simultaneously improve both accessible surface area and solubility. Spectroscopic analysis provides evidence that mixed valency between neighboring ferrocenyl units is supported in these polymers.

DNA origami is typically used to fold a long single-stranded DNA scaffold into nanostructures with complex geometries using many short DNA staple strands. Integration of RNA into nucleic acid nanostructures is also possible, but has been less studied. In this research, we designed and characterized a hybrid RNA-scaffolded origami nanostructure with dimensions of ∼12 nm. We used 12 DNA staple strands to fold a 401 nt RNA scaffold into a ten-helix bundle with a honeycomb cross section. We verified the construction of the nanostructure using gel electrophoresis and atomic force microscopy. The DNA-RNA hybrid origami showed higher resistance to ribonuclease compared to a DNA-RNA duplex control. Our work shows potential use in folding long RNA, such as messenger RNA, into origami nanostructures that can be delivered into targeted cells as medicine or a vaccine., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Recently, intrinsically conductive metal-organic frameworks (MOFs) have demonstrated promising performance in fast-charging energy storage applications and may outperform some current electrode materials ( e.g. , porous carbons) for supercapacitors in terms of both gravimetric and volumetric capacitance. In this report, we examine the mechanism of high capacitance in a nickel hexaaminobenzene-based MOF (NiHAB). Using a combination of in situ Raman and X-ray absorption spectroscopies, as well as detailed electrochemical studies in a series of aqueous electrolytes, we demonstrate that the charge storage mechanism is, in fact, a pH-dependent surface pseudocapacitance, and unlike typical inorganic systems, where transition metals change oxidation state during charge/discharge cycles, NiHAB redox activity is ligand-centered.

In this work, we synthesize large-area thin films of a conjugated, imine-based, two-dimensional covalent organic framework at the solution/air interface. Thicknesses between ∼2-200 nm are achieved. Films can be transferred to any desired substrate by lifting from underneath, enabling their use as the semiconducting active layer in field-effect transistors.

The application of a core-shell architecture allows the formation of a polymer-coated metal-organic framework (MOF) maintaining high surface area (2289-2857 m(2) g(-1)). The growth of a MOF shell from a MOF core was used to spatially localize initiators by post-synthetic modification. The confinement of initiators ensures that polymerization is restricted to the outer shell of the MOF.

Semiconducting, single-walled carbon nanotubes (SWNTs) are promising candidates for applications in thin-film transistors, solar cells, and biological imaging. To harness their full potential, however, it is necessary to separate the semiconducting from the metallic SWNTs present in the as-synthesized SWNT mixture. While various polymers are able to selectively disperse semiconducting SWNTs, the subsequent removal of the polymer is challenging. However, many applications require semiconducting SWNTs in their pure form. Toward this goal, we have designed a 2-ureido-6[1H]-pyrimidinone (UPy)-based H-bonded supramolecular polymer that can selectively disperse semiconducting SWNTs. The dispersion purity is inversely related to the dispersion yield. In contrast to conventional polymers, the polymer described herein was shown to disassemble into monomeric units upon addition of an H-bond-disrupting agent, enabling isolation of dispersant-free, semiconducting SWNTs.

A strategy that allows the tuning of pore size in microporous coordination polymers (MCPs) through modification of their organic linkers is presented. When large substituents are introduced onto the linker, these pendent groups partially occupy the pores, thus reducing pore size while serving as additional adsorption sites for gases. The approach takes advantage of the fact that, for methane storage materials, small pores (0.4-0.8 nm in diameter) are more desirable than large pores since small pores promote optimal volumetric capacity. This method was demonstrated with IRMOF-8, a MCP constructed from Zn4O metal clusters and 2,6-naphthalenedicarboxylate (NDC) linkers. The NDC was functionalized through the addition of substituents including tert-butylethynyl or phenylethynyl groups. High pressure methane uptake demonstrates that the IRMOF-8 derivatives have significantly better performance than the unfunctionalized material in terms of both excess volumetric uptake and deliverable capacity. Moreover, IRMOF-8 derivatives also give rise to stronger interactions with methane molecules as shown by higher heat of adsorption values.

Microporous coordination polymers (MCPs) have emerged as strong contenders for adsorption-based fuel storage and delivery in large part because of their high specific surface areas. The strategy of increasing surface area by increasing organic linker length has shown only sporadic success; as demonstrated by many members of the iconic Zn4O-based IRMOF series, for example, accessible porosity is often limited by interpenetration or pore collapse upon guest removal. In this work, we focus on Zn4O(ndc)3 (IRMOF-8, ndc = 2,6-naphthalene dicarboxylate), which exhibits typical surface areas of only 1000-2000 m(2)/g even though a surface area of more than 4000 m(2)/g is expected from geometric analysis of the originally reported crystal structure. We recently showed that a high surface area could be produced with zinc and ndc by room-temperature synthesis followed by activation with flowing supercritical CO2. In this work, we investigate in detail the porosity of both the low- and high-surface-area materials. Positron annihilation lifetime spectroscopy (PALS) is used to show that the low-surface-area material suffers from near-complete interpenetration, explaining why traditional synthetic routes have failed to yield materials with the expected porosity. Furthermore, the high-pressure hydrogen and methane sorption properties of noninterpenetrated Zn4O(ndc)3 are examined, and PALS is used to show that pore filling is not operative during room-temperature CH4 sorption even at pressures approaching 100 bar. These results provide insight into how gas adsorbs in high-surface-area materials at high pressure and reinforce previous contentions that increasing surface area alone is not sufficient for the simultaneous optimization of deliverable gravimetric and volumetric gas uptake in MCPs.

Positronium (Ps) is shown to exist in a delocalized state in self-assembled metalorganic crystals that have large 1.3-1.5 nm cell sizes. Belonging to a class of materials with record high accessible specific surface areas, these highly porous crystals are the first to allow direct probing with simple annihilation lifetime techniques of the transport properties of long-lived triplet Ps in what is hypothesized to be a Bloch state. Delocalized Ps has unprecedented (high) Ps mobility driven primarily by weak phonon scattering with unusual and profound consequences on how Ps probes the lattice.

The synthesis and successful activation of IRMOF-8 (Zn(4)O(ndc)(3), ndc = naphthalene-2,6-dicarboxylate) is presented. Room temperature synthesis effectively suppresses interpenetration. Although conventional activation under reduced pressure leads to structural collapse, activation by flowing supercritical CO(2) yields a guest-free material with a BET surface area of 4461 m(2) g(-1).

There are several compounds for which there exists a disconnect between porosity as predicted by crystallography and porosity measured by gas sorption analysis. In this paper, the Zn-based analogue of Cu(3)(btc)(2) (HKUST-1), Zn(3)(btc)(2) (Zn-HKUST-1; btc = 1,3,5-benzenetricarboxylate) is investigated. Conventional analysis of Zn-HKUST-1 by powder X-ray diffraction and gas sorption indicates retention of crystalline structure but negligible nitrogen uptake at 77 K. By using positron annihilation lifetime spectroscopy, a densified surface layer preventing the entry of even small molecular species into the crystal framework is revealed. The material is shown to have inherent surface instability after solvent removal, rendering it impermeable to molecular guests irrespective of handling and processing methods. This previously unobserved surface instability may provide insight into the failure of other microporous coordination polymers to exhibit significant porosity despite crystal structures indicative of regular, interconnected, microporous networks.

Quantitative techniques are essential to analyze the structure of soft multicomponent nanobioclusters. Here, we combine electrospray differential mobility analysis (ES-DMA), which rapidly measures the size of the entire cluster, with transmission electron microscopy (TEM), which detects the hard components, to determine the presence and composition of the softer components. Coupling analysis of TEM and ES-DMA derived data requires the creation and use of analytical models to determine the size and number of constituents in nanoparticle complexes from the difference between the two measurements. Previous ES-DMA analyses have been limited to clusters of identical spherical particles. Here, we dramatically extend the ES-DMA analysis framework to accommodate more challenging geometries, including protein corona-coated nanorods, clusters composed of heterogeneously sized nanospheres, and nanobioclusters composed of both nanospheres and nanorods. The latter is critical to determining the number of quantum dots attached to lambda (λ) phage, a key element of a rapid method to detect bacterial pathogens in environmental and clinical samples.