Search

Introduction: Cancers are regarded as hazardous due to their high worldwide death rate, with breast cancer (BC), which affects practically all cancer patients globally, playing a significant role in this statistic. The therapeutic approach for BC has not advanced using standard techniques, such as specialized naringin (NG) chemotherapy. Instead, a novel strategy has been utilized to enhance smart drug delivery (SDD) to tumors., Significance: Herein, we established NG-loaded zinc metal-organic framework-5 (NG-MOF-5) coated with liponiosomes (LNs) to manufacture NG-MOF-5@LNs nanoparticles (NPs) for antibacterial and cancer treatment., Methods: MOF-5, NG, and NG-MOF-5@LNs were evaluated with XRD, thermogravimetric analysis (TGA), FTIR, SEM, TEM, PDI, ZP, encapsulation efficiency (EE), loading efficiency (LE), and drug release (DR) kinetics. We examined the antibacterial activity involving minimum inhibitory concentration (MIC) and zone of inhibition by NG, MOF-5, and NG-MOF-5@LNs. The cell viability, necrosis, and total apoptosis (late and early) were evaluated for anti-cancer activity against MCF-7 BC cells., Results: TEM results demonstrated that NG-MOF-5@LNs formed monodispersed spherical-like particles with a size of 122.5 nm, PDI of 0.139, and ZP of +21 mV. The anti-microbial activity results indicated that NG-MOF-5@LNs exhibited potent antibacterial effects, as evidenced by inhibition zones and MIC values. The Higuchi model indicates an excellent fit ( R 2  = 0.9988). The MTT assay revealed anti-tumor activity against MCF-7 BC cells, with IC 50 of 21 µg/mL for NG-MOF-5@LNs and demonstrating a total apoptosis effect of 68.2% on MCF-7 cells., Conclusion: NG-MOF-5@LNs is anticipated to show as an effective antimicrobial and novel long-term-release antitumor agent and might be more suitable for MCF-7 cell therapy.

Background: Obesity has become a prevalent issue worldwide, leading to various complications such as hyperlipidemia, diabetes, and cardiovascular problems. Statins, as FDA approved anti-hyperlipidemic drugs, still pose some concerns upon their administration. Recently, researchers have looked for natural products as an alternative to manage hyperlipidemia and obesity., Aim: This work aimed to study the hypolipidemic effect of Lepidium sativum garden cress (GC) from different preparations; orally administered seeds, and hydrogel, in comparison to atorvastatin., Methods: GC hydrogel was prepared from the GC aqueous extract and pharmaceutically evaluated for its pH, spreadability, seeds content, homogeneity, rheology, and in vitro release. The rat's body weight, blood glucose levels, total lipid profile, and liver biomarkers were evaluated on obese rats for one month. In addition, the histopathology study was also performed., Results: GC hydrogel had acceptable pharmaceutical properties and showed a sustained release performance over 24 h. Oral and topical GC significantly reduced the lipid profiles, blood sugar and ALT, AST levels more than the negative control group and comparable to atorvastatin. It was found that oral GC showed a significant effect on the percentage decrease in the rat's body weight than the applied hydrogel. Histopathology study revealed a better outcome in the histological structure of pancreas and liver compared with rats feed on high fat diet post-treatment for one month., Conclusion: GC orally administered, or topically applied hydrogel could be a promising, safe alternative formulation to atorvastatin in managing hyperlipidemia and normalizing body weight of obese rats.

Background: Differentiating sepsis from non-infectious systemic inflammatory response syndrome (SIRS) is challenging. Biomarkers like procalcitonin (PCT) aid early risk assessment and guide antibiotic use. This study aims to ascertain PCT's accuracy as a sepsis biomarker among adult emergency department admissions., Method: The PRISMA guidelines were followed to search for relevant articles in five electronic databases between April 14th and August 4th, 2023: PubMed, Cochrane Library, ProQuest, EMBASEs, and ScienceDirect. Studies had to be published in English to avoid directly translating scientific terms. Besides, the inclusion criteria were based on the diagnosis of sepsis in adult patients admitted to an emergency department. QUADAS-2 tool provided by the Review Manager version 5.4.1 was utilized to assess the risk of bias in included studies. STATA (v. 16) software was used to perform the meta-analysis., Results: Ten of 2457 studies were included. We sampled 2980 adult sepsis patients for the under-investigated role of PCT in ED sepsis diagnosis. PCT emerged as the primary early diagnostic biomarker with high levels (29.3 ± 85.3 ng/mL) in sepsis patients. Heterogeneity in outcomes, possibly due to bias in cohort and observational studies, was observed., Conclusion: PCT tests offer moderate accuracy in diagnosing sepsis and stand out for rapidly and precisely distinguishing between viral and bacterial inflammations., (© 2024. The Author(s).)

Designing a robust direct compression (DC) formulation for an active pharmaceutical ingredient (API) with poor flow and compaction properties at a high API load is challenging. This study tackled two challenges: the unfavorable flow characteristics and tableting problems associated with a high-drug-loading canagliflozin (CNG), facilitating high-speed DC tableting. This was accomplished through a single-step dry coating process using hydrophilic nano-sized colloidal silica. A 3 2 full-factorial experimental design was carried out to optimize the independent process variables, namely, the weight percent of silica nanoparticles (X 1 ) and mixing time (X 2 ). Flow, bulk density, and compaction properties of CNG-silica blends were investigated, and the optimized blend was subsequently compressed into tablets using the DC technique. A regression analysis exhibited a significant ( p ≤ 0.05) influence of both X 1 and X 2 on the characteristics of CNG with a predominant effect of X 1 . Additionally, robust tablets were produced from the processed powders in comparison with those from the control batch. Furthermore, the produced tablets showed significantly lower tablet ejection forces than those from the control batch, highlighting the lubrication impact of the silica nanoparticles. Interestingly, these tablets displayed improved disintegration time and dissolution rates. In conclusion, a dry coating process using silica nanoparticles presents a chance to address the poor flow and tableting problems of CNG, while minimizing the need for excessive excipients, which is crucial for the effective development of a small-sized tablet and the achievement of a cost-effective manufacturing process.

Decreased stemness and increased cellular senescence impair the ability of mesenchymal stem cells (MSCs) to renew themselves, change into different cell types, and contribute to regenerative medicine. There is an urgent need to discover new compounds that can boost MSCs' stemness and delay senescence. Therefore, this study aimed to investigate the impact of walnut kernel oil (WKO) and defatted (WKD) extracts on bone marrow (BM)-MSC stemness and senescence. Premature senescence and inflammation were induced in BM-MSCs using H 2 O 2 and LPS, respectively. Phytochemical constituents of WKO and WKD extracts were detected by HPLC. The stemness (proliferation and migration), senescence-related markers (p53, p21, SIRT1, and AMPK), oxidative stress/antioxidant markers, inflammatory cytokines, and cell cycle of BM-MSCs were measured by MTT assay, qPCR, ELISA, and flow cytometry. WKO and WKD extracts improved rat BM-MSC stemness, as evidenced by (1) increased cell viability, (2) decreased apoptosis (low levels of Bax and caspase3 and high levels of Bcl2 ), (3) upregulated MMP9 and downregulated TIMP1 expression, and (4) cell cycle arrest in the G0/G1 phase and declined cell number in the S and G2/M phases. Additionally, WKO and WKD extracts reduced rat BM-MSC senescence, as indicated by (1) decreased p53 and p21 expression, (2) upregulated expression and levels of SIRT1 and AMPK, (3) reduced levels of ROS and improved antioxidant activity (higher activity of CAT, SOD, and GPx and upregulated expression of NrF2 and HO-1 ), and (4) declined levels of TNFα, IL1β, and NF-κB. When compared to the WKO extract, the WKD extract had a greater impact on the induction of stemness and reduction of senescence of BM-MSCs due to its stronger antioxidant activity, which could be attributed to its higher levels of flavonoids and phenolic compounds, as detected by HPLC analysis. WKO and WKD extracts enhance rat BM-MSC stemness and protect them from senescence, suggesting their potential use as enhancers to increase MSCs' therapeutic efficacy.

The availability of age-appropriate oral dosage forms for pediatric patients has remained a challenge. Orodispersible mini-tablets (ODMTs) are a promising delivery system for pediatric patients. The purpose of this work was the development and optimization of sildenafil ODMTs as a new dosage form for the treatment of pulmonary hypertension in children using a design-of-experiment (DoE) approach. A two-factor, three levels (3 2 ) full-factorial design was employed to obtain the optimized formulation. The levels of microcrystalline cellulose (MCC; 10-40% w / w ) and partially pre-gelatinized starch (PPGS; 2-10% w / w ) were set as independent formulation variables. In addition, mechanical strength, disintegration time (DT), and percent drug release were set as critical quality attributes (CQAs) of sildenafil ODMTs. Further, formulation variables were optimized using the desirability function. ANOVA analysis proved that MCC and PPGS had a significant ( p < 0.05) impact on CQAs of sildenafil ODMTs with a pronounced influence of PPGS. The optimized formulation was achieved at low (10% w / w ) and high (10% w / w ) levels of MCC and PPGS, respectively. The optimized sildenafil ODMTs showed crushing strength of 4.72 ± 0.34 KP, friability of 0.71 ± 0.04%, DT of 39.11 ± 1.03 s, and sildenafil release of 86.21 ± 2.41% after 30 min that achieves the USP acceptance criteria for ODMTs. Validation experiments have shown that the acceptable prediction error (<5%) indicated the robustness of the generated design. In conclusion, sildenafil ODMTs have been developed as a suitable oral formulation for the treatment of pediatric pulmonary hypertension using the fluid bed granulation process and the DoE approach.

In the pharmaceutical industry, the systematic optimization of process variables using a quality-by-design (QbD) approach is highly precise, economic and ensures product quality. The current research presents the implementation of a design-of-experiment (DoE) driven QbD approach for the optimization of key process variables of the green fluidized bed granulation (GFBG) process. A 3 2 full-factorial design was performed to explore the effect of water amount (X 1 ; 1-6% w / w ) and spray rate (X 2 ; 2-8 g/min) as key process variables on critical quality attributes (CQAs) of granules and tablets. Regression analysis have demonstrated that changing the levels of X 1 and X 2 significantly affect ( p ≤ 0.05) the CQAs of granules and tablets. Particularly, X 1 was found to have the pronounced effect on the CQAs. The GFBG process was optimized, and a design space (DS) was built using numerical optimization. It was found that X 1 and X 2 at high (5.69% w / w ) and low (2 g/min) levels, respectively, demonstrated the optimum operating conditions. By optimizing X 1 and X 2 , GFBG could enhance the disintegration and dissolution of tablets containing a poorly water-soluble drug. The prediction error values of dependent responses were less than 5% that confirm validity, robustness and accuracy of the generated DS in optimization of GFBG.

Sildenafil citrate undergoes first-pass metabolism, resulting in poor oral bioavailability at 25-41% of the administered dose. This study aimed to design and optimize fast-disintegrating tablets for the sublingual delivery of sildenafil citrate to improve bioavailability and facilitate rapid onset of action. The design-of-experiment (DoE) approach using 3 2 full factorial design was conducted to develop a new formulation of sildenafil fast-disintegrating sublingual tablets (FDSTs) using the fluid-bed granulation technique. The levels of partially pre-gelatinized starch (5-15%) and microcrystalline cellulose (10-60%) were selected as independent formulation variables. The prepared FDSTs were investigated for physical properties. Further, the optimum formulation was chosen for in vivo study in rabbits. Regression analysis showed that independent variables have a significant ( p < 0.05) influence on critical attributes of FDSTs. The optimized formulation showed acceptable mechanical strength (friability < 1.0%) with very fast disintegration (14.561 ± 0.84 s) and dissolution (94.734 ± 2.76% after 15 min). Further, the optimized formulation demonstrated a significant increase ( p < 0.01) in C max and AUC 0 -∞ with short t max compared to the market product (Viagra ® ). Based on these results, using the DoE approach, a high level of assurance was achieved for FDSTs' product quality and performance.

Maximization of drug-loading can significantly reduce the size of dosage form and consequently decrease the cost of manufacture. In this research, two challenges were addressed: poor flow and tableting problems of high-drug loading (>70%) formulation of canagliflozin (CNG), by adopting the moisture-activated dry granulation (MADG) process. In this method, heating and drying steps were omitted so, called green granulation process. A 3 2 full-factorial design was performed for optimization of key process variables, namely the granulation fluid level (X 1 ) and the wet massing time (X 2 ). Granulation of CNG was carried out in the presence of polyvinylpyrrolidone, and the prepared granules were compressed into tablets. Regression analysis demonstrated the significant ( p ≤ 0.05) effect of X 1 and X 2 on properties of granules and corresponding tablets, with pronounced impact of X 1 . Additionally, marked improvement of granules' properties and tableting of CNG were observed. Furthermore, the optimized process conditions that produced good flow properties of granules and acceptable tablets were high level of granulation fluid (3.41% w / w ) and short wet massing time (1.0 min). Finally, the MADG process gives the opportunity to ameliorate the poor flow and tableting problems of CNG with lower amounts of excipients, which are important for successful development of uniform dosage unit.

The objective of this study was to examine the influence of drug amount and mixing time on the homogeneity and content uniformity of a low-dose drug formulation during the dry mixing step using a new gentle-wing high-shear mixer. Moreover, the study investigated the influence of drug incorporation mode on the content uniformity of tablets manufactured by different methods. Albuterol sulfate was selected as a model drug and was blended with the other excipients at two different levels, 1% w/w and 5% w/w at impeller speed of 300 rpm and chopper speed of 3000 rpm for 30 min. Utilizing a 1 ml unit side-sampling thief probe, triplicate samples were taken from nine different positions in the mixer bowl at selected time points. Two methods were used for manufacturing of tablets, direct compression and wet granulation. The produced tablets were sampled at the beginning, middle, and end of the compression cycle. An analysis of variance analysis indicated the significant effect (p < .05) of drug amount on the content uniformity of the powder blend and the corresponding tablets. For 1% w/w and 5% w/w formulations, incorporation of the drug in the granulating fluid provided tablets with excellent content uniformity and very low relative standard deviation (∼0.61%) during the whole tableting cycle compared to direct compression and granulation method with dry incorporation mode of the drug. Overall, gentle-wing mixer is a good candidate for mixing of low-dose cohesive drug and provides tablets with acceptable content uniformity with no need for pre-blending step.

The aim of this work was to study the application of design of experiment (DoE) approach in defining design space for granulation and tableting processes using a novel gentle-wing high-shear granulator. According to quality-by-design (QbD) prospective, critical attributes of granules, and tablets should be ensured by manufacturing process design. A face-centered central composite design has been employed in order to investigate the effect of water amount (X 1 ), impeller speed (X 2 ), wet massing time (X 3 ), and water addition rate (X 4 ) as independent process variables on granules and tablets characteristics. Acetaminophen was used as a model drug and granulation experiments were carried out using dry addition of povidone k30. The dried granules have been analyzed for their size distribution, density, and flow pattern. Additionally, the produced tablets have been investigated for; weight uniformity, breaking force, friability and percent capping, disintegration time, and drug dissolution. Results of regression analysis showed that water amount, impeller speed and wet massing time have significant (p < .05) effect on granules and tablets characteristics. However, the water amount had the most pronounced effect as indicated by its higher parameter estimate. On the other hand, water addition rate showed a minimal impact on granules and tablets properties. In conclusion, water amount, impeller speed, and wet massing time could be considered as critical process variables. Thus, understanding the relationship between these variables and quality attributes of granules and corresponding tablets provides the basis for adjusting granulation variables in order to optimize product performance.

Development of orodispersible delivery system of high mechanical properties and low disintegration time is a big challenge. The aim of the current work was to assess and optimize the high shear granulation process as a new methodology for development of orodispersible tablets of high quality attributes using design of experiment approach. A two factor, three levels (32), full factorial design was carried out to investigate the main and interaction effects of independent variables, water amount (XI) and granulation time (X2) on the characteristics of granules and final product, tablet. The produced granules were analyzed for their granule size, density and flowability. Furthermore, the produced tablets were tested for: weight variation, breaking force/ crushing strength, friability, disintegration time and drug dissolution. Regression analysis results of multiple linear models showed a high correlation between the adjusted R-squared and predicted R-squared for all granules and tablets characteristics, the difference is less than 0.2. All dependent responses of granules and tablets were found to be impacted significantly (p < 0.05) by the two independent variables. However, water amount demonstrated the most dominant effect for all granules and tablet characteristics as shown by higher its coefficient estimate for all selected responses. Numerical optimization using desirability function was performed to optimize the variables under study to provide orodispersible system within the USP limit with respect of mechanical properties and disintegration time. It was found that the higher desirability (0.915) could be attained at the low level pf water (180 g) and short granulation time (1.65 min). Eventually, this study provides the formulator with helpful information in selecting the proper level of water and granulation time to provide an orodispersible system of high crushing strength and very low disintegration time, when high shear granulation methodology was used as a method of manufacture.

High shear wet granulation is a significant component procedure in the pharmaceutical industry. The objective of the study was to investigate the influence of two independent formulation variables; polyvinypyrrolidone (PVP) as a binder (X,) and croscarmellose sodium (CCS) as a disintegrant (X2) on the crit- ical quality attributes of acetaminophen granules and their corresponding tablets using design of experiment (DoE) approach. A two factor, three level (32) full factorial design has been applied; each variable was investi- gated at three levels to characterize their strength and interaction. The dried granules have been analyzed for their density, granule size and flowability. Additionally, the produced tablets have been investigated for: break- ing force, friability, disintegration time and t. of drug dissolution. The analysis of variance (ANOVA) showed that the two variables had a significant impact (p < 0.05) on granules and tablets characteristics, while only the binder concentration influenced the tablets friability. Furthermore, significant interactions (p < 0.05) between the two variables, for granules and tablets attributes, were also found. However, variables interaction showed minimal effect for granules flowability as well as tablets friability. Desirability function was carried out to opti- mize the variables under study to obtain product within the USP limit. It was found that the higher desirability (0.985) could be obtained at the medium level of PVP and low level of CCS. Ultimately, this study supplies the formulator with beneficial tools in selecting the proper level of binder and disintegrant to attain product with desired characteristics.

Application of quality by design (QbD) in high shear granulation process is critical and need to recognize the correlation between the granulation process parameters and the properties of intermediate (granules) and corresponding final product (tablets). The present work examined the influence of water amount (X,) and wet massing time (X2) as independent process variables on the critical quality attributes of granules and corresponding tablets using design of experiment (DoE) technique. A two factor, three level (32) full factorial design was performed; each of these variables was investigated at three levels to characterize their strength and interaction. The dried granules have been analyzed for their size distribution, density and flow pattern. Additionally, the produced tablets have been investigated for weight uniformity, crushing strength, friability and percent capping, disintegration time and drug dissolution. Statistically significant impact (p < 0.05) of water amount was identified for granule growth, percent fines and distribution width and flow behavior. Granule density and compressibility were found to be significantly influenced (p < 0.05) by the two operating conditions. Also, water amount has significant effect (p < 0.05) on tablet weight unifornity, friability and percent capping. Moreover, tablet disintegration time and drug dissolution appears to be significantly influenced (p < 0.05) by the two process variables. On the other hand, the relationship of process parameters with critical quality attributes of granule and final product tablet was identified and correlated. Ultimately, a judicious selection of process parameters in high shear granulation process will allow providing product of desirable quality.

The objective of this study was to evaluate the potential of Carbopol(®) 71G-NF on the release of dextromethorphan hydrobromide (DM) from matrix tablets in comparison with hydroxypropyl methylcellulose (HPMC(®) K15M) and Eudragit(®) L100-55 polymers. Controlled release DM matrix tablets were prepared using Carbopol 71G-NF, HPMC K15M, and Eudragit L100-55 at different drug to polymer ratios by direct compression technique. The mechanical properties of the tablets as tested by crushing strength and friability tests were improved as the concentration of Carbopol, HPMC, and Eudragit increased. However, Carbopol-based tablets showed a significantly (P<0.05) higher crushing strength and a lower friability than HPMC and Eudragit tablets. No significant differences in weight uniformity and thickness values were observed between the different formulations. It was also found that Carbopol significantly (P<0.05) delayed the release of DM in comparison with HPMC K15M and Eudragit L100-55. A combination of HPMC K15M and Eudragit L100-55 in a 1:1 ratio at 20 and 30% significantly (P<0.05) delayed the release of DM than Eudragit L100-55 alone. Moreover, blends of Carbopol and HPMC at a 1:1 ratio at the 10, 20, and 30% total polymer concentration were investigated. The blend of Carbopol and HPMC at 10% level significantly (P<0.05) slowed the release of DM than Carbopol or HPMC alone, whereas blends at 20 and 30% level significantly (P<0.05) delayed the release of DM compared with HPMC or Carbopol alone. The results with these polymer blends showed that it was possible to reduce the total amount of polymers when used as a combination in formulation.