Search

A retrospective study of 201 anatomic graduated component total knee arthroplasties implanted with hybrid fixation at the authors' center was performed in response to conflicting data in the literature concerning the benefits of a hybrid method. Selection for hybrid fixation was nonrandomized and based on femoral component fit. Survivorship analysis was performed, and rates of radiolucent lines surrounding the femoral component and occurrence of osteolysis were noted. At 7 and 13 years, survivorship with tibial or femoral revision as the end point was 0.9926 and 0.9732, respectively. Radiolucencies were found adjacent to 15 femoral components at final followup (seven in Zone 1, three in Zone 2, five in Zone 3, one in Zone 4, two in Zone 5, zero in Zone 6). Osteolysis was observed in one knee after secondary evaluation. Hybrid fixation in a selected patient population can result in excellent results in middle to long-term followup. [ABSTRACT FROM AUTHOR]

Background: The effect of so-called stuffing of the patellofemoral compartment at the time of total knee arthroplasty (that is, increasing the anterior patellar displacement, the anteroposterior femoral size, or the combined anteroposterior patellofemoral size) has not been well studied. The purpose of the present study was to evaluate the effect of stuffing the patellofemoral compartment on the outcome of primary total knee arthroplasty.Methods: A retrospective review of 1100 primary total knee arthroplasties that had been performed in 1997 and 1998 was conducted. Eight hundred and thirty arthroplasties (75.5%) met the diagnostic and minimum two-year follow-up criteria for inclusion in this report. Radiographic measurements were made to determine preoperative and postoperative anterior patellar displacement, anteroposterior femoral size, combined anteroposterior patellofemoral size, anterior femoral offset, and posterior femoral offset. Regression analysis was performed to determine the effects of changes in these variables on the range of motion, the Knee Society Knee Score, the Knee Society Function Score, the Knee Society Pain Score, and the rate of lateral retinacular release.Results: Preoperative to postoperative changes in anterior patellar displacement, anteroposterior femoral size, combined anteroposterior patellofemoral size, anterior femoral offset, and posterior femoral offset had no clinically meaningful effect on the range of motion of the knee or on any of the Knee Society scores. Increases in anterior patellar displacement were associated with a lower probability of the need for a lateral retinacular release. Increases in measured anteroposterior femoral size were associated with a higher probability of the need for lateral release. Even when combined, however, these relationships explained only 10.1% of the observed variance in the need for lateral retinacular release. Moreover, analyses indicated that patient gender, large as opposed to medium patellar size, and absolute femoral component size influenced the likelihood of lateral release more than did anterior patellar displacement and measured anteroposterior femoral size.Conclusions: Our findings do not support the widely held belief that stuffing of the patellofemoral joint results in adverse outcomes after total knee arthroplasty. Furthermore, the need for lateral release appears to be multifactorial and likely involves a more complex set of factors. Thus, without evidence of other identifiable causes of failure, we do not recommend revision for the treatment of pain of an overstuffed knee joint. [ABSTRACT FROM AUTHOR]

Background: The treatment of a supracondylar femoral fracture following total knee arthroplasty is complicated by the presence of the prosthetic components. Anterior femoral notching during arthroplasty has been implicated as a contributing risk factor for femoral fracture. We retrospectively reviewed the effect of anterior femoral notching on the subsequent occurrence of a periprosthetic supracondylar fracture of the distal aspect of the femur and the outcomes of primary total knee arthroplasty in such patients.Methods: The prevalence and depth of femoral notching were determined on a review of the lateral radiographs by observers blinded to the clinical results of 1089 consecutive total knee replacements performed in 1997 and 1998. Linear and logistic regression modeling was used to analyze the relationship between femoral notching and the prevalence of supracondylar femoral fracture, postoperative range of motion, the Knee Society score, and the Knee Society functional and pain scores.Results: Femoral notching was performed in 325 (29.8%) of the 1089 knees in our series. During an average follow-up period of 5.1 years, only two supracondylar femoral fractures occurred, both in femora treated without notching. Femoral notching was not associated with an increased rate of fracture (p = 1.000) or with significant differences in the measures of outcome (range of motion [p = 0.117], knee score [p = 0.967], functional score [p = 0.861], need for a lateral release [p = 0.234], or postoperative pain [p = 0.948]).Conclusions: This study demonstrated no difference in knees managed with or without notching of the anterior distal aspect of the femur with respect to the occurrence of a supracondylar fracture, range of motion, Knee Society score, Knee Society function, or pain. [ABSTRACT FROM AUTHOR]

Background: While high success rates have been achieved in association with other all-polyethylene tibial components, an alarming number of failures have occurred at our institution in association with the use of an all-polyethylene version of the AGC tibial component. The purpose of the present study was to describe the survival of the AGC all-polyethylene tibial component.Methods: Five hundred and thirty-six AGC all-polyethylene tibial components were implanted in 405 patients and were followed over a ten-year period. The average age of the patients at the time of surgery was 70.3 years, the average weight was 78 kg, and the most common diagnosis was osteoarthritis (prevalence, 92.9%). A clinical and radiographic analysis was performed, Knee Society knee and function scores were determined, and Kaplan-Meier survivorship analysis was conducted. Failure was defined as aseptic loosening as evidenced by progressive radiolucent lines and/or revision due to aseptic loosening or collapse.Results: A high rate of failure was noted in the early postoperative period, with a survival rate of 90.04% (95% confidence interval, 87.35% to 92.72%) after three years. At ten years, the survival rate was 68.11% (95% confidence interval, 57.57% to 78.65%). Fifty-eight (73.4%) of seventy-nine failures occurred in association with loosening or collapse of the bone beneath the medial tibial plateau.Conclusion: While some all-polyethylene tibial designs have been successful, the low success rate among knees treated with the AGC all-polyethylene tibial component suggests that the results associated with all-polyethylene tibial components are design-sensitive.Level Of Evidence: Therapeutic study, Level IV (case series [no, or historical, control group]). See Instructions to Authors for a complete description of levels of evidence. [ABSTRACT FROM AUTHOR]

Background: The outcome of total knee replacement after high tibial osteotomy remains uncertain. We hypothesized that the results of total knee replacement with or without a previous high tibial osteotomy are similar.Methods: The results of a consecutive series of thirty-nine bilateral total knee arthroplasties performed with cement at an average of 8.7 years after unilateral high tibial osteotomy were reviewed. There were twenty-seven men and twelve women. Preoperatively, the knee scores according to the system of the Knee Society were similar for all of the knees; however, valgus alignment and patella infera were more common in the knees with a previous high tibial osteotomy. Bilateral total knee replacement was staged in seven patients and was simultaneous in thirty-two patients. The results of the total knee arthroplasties were retrospectively reviewed with respect to the knee and function scores according to the system of the Knee Society, the radiographic findings, and the complications.Results: Intraoperatively, no notable differences were identified in the number of medial, lateral, or lateral patellar releases required. However, less lateral tibial bone was resected in the group with a previous high tibial osteotomy (average, 3.3 millimeters) than in the group without a high tibial osteotomy (average, 7.5 millimeters). The average duration of follow-up was 7.5 years (range, three to sixteen years) in the group with a previous high tibial osteotomy and 6.8 years (range, two to ten years) in the group without a high tibial osteotomy. At the time of the final follow-up, the knee and function scores were similar for the two groups (89.0 and 81.0 points, respectively, for the group with a previous high tibial osteotomy, and 89.6 and 83.9 points, respectively, for the group without a high tibial osteotomy). Although more knees were free of pain in the group without a previous high tibial osteotomy (thirty-six) than in the group with a previous osteotomy (thirty-three), this difference was not found to be significant with the numbers available (p = 0.4810). Knee alignment and stability, femoral and tibial component alignment, and range of motion also were similar in both groups postoperatively. One allpolyethylene tibial component was revised in the high tibial osteotomy group. Two knees in each group required manipulation. There were no deep infections.Conclusions: While patients with a previous high tibial osteotomy may have important differences preoperatively, including valgus alignment, patella infera, and decreased bone stock in the proximal part of the tibia, the present study suggests that the clinical and radiographic results of primary total knee arthroplasty in knees with and without a previous high tibial osteotomy are not substantially different. In our relatively small group of patients, the previous high tibial osteotomy had no adverse effect on the outcome of the subsequent total knee replacement. [ABSTRACT FROM AUTHOR]

Extended trochanteric osteotomy facilitates femoral reconstruction in revision total hip arthroplasty. This study examined the outcome of extended trochanteric osteotomy combined with a proximally porous-coated calcar replacement prosthesis during revision total hip arthroplasty. Forty-five cases were reviewed with an osteotomy union rate of 98%. No femoral component was loose radiographically, and none were revised for loosening. These findings indicate excellent short-term clinical and radiographic results can be achieved with an extended trochanteric osteotomy and proximally porous-coated calcar replacement prosthesis. [ABSTRACT FROM AUTHOR]

Background: The present study investigates the clinical and radiographic outcomes in patients with all 4 major lower extremity joints replaced., Methods: A retrospective review of our institution's database identified 125 patients in whom both hips and both knees were replaced. The mean time between the first and last arthroplasty was 6.6 years. Preoperative diagnoses included osteoarthritis in 80% and rheumatoid arthritis in 20%. The average age at the time of the first arthroplasty was 63.7 years. The mean follow-up for all arthroplasties was 10.5 years (range 2-31 years). Patients were then matched according to age, gender, diagnosis, prosthesis, and follow-up, to patients with single or bilateral total hip or total knee arthroplasty., Results: There were 11 aseptic hip revisions (4.4%) and 3 aseptic knee revisions (1.2%). At final follow-up, 86% of hips and 83% of knees were rated with no or mild pain, 68% of patients rated walking as unlimited, and 98% of patients were able to satisfactorily negotiate stairs. Aseptic survivorship for all joint arthroplasties was 93.8% at 15 years. No statistical differences were noted in pain, function, stair, and walking scores between the matched groups., Conclusion: This report demonstrated excellent clinical, functional, and radiographic outcomes in patients with all 4 major lower extremity joints replaced. Walking aids were needed in 15% of patients, however. At final follow-up, this selected group of patients appears to fare just as well as patients with single or bilateral hip or knee arthroplasty with respect to pain and function., (Copyright © 2017 Elsevier Inc. All rights reserved.)

Background: ACL status varies in the arthritic knee during TKA., Questions/purposes: The purpose of this study was to examine clinical features and intraoperative findings associated with stages of ACL degeneration., Methods: Coronal deformity, ROM, intra-articular degenerative patterns, and ligament releases were assessed for 1656 knees during TKA. Common patterns of deformity and severity of degenerative change were assessed as a function of the severity of ACL deficiency., Results: Of the 1656 knees assessed, 27% had a normal ACL, 55% exhibited damage, and 18% exhibited complete absence of the ACL. Increased coronal deformity and lower preoperative ROM was associated with ACL deficiency. Increased chondral and meniscal damage and more extensive osteophyte formation were also found. More extensive ligament releases were required in ACL-deficient knees., Conclusions: The status of the ACL is predictive of the need for increased surgical deformity correction. A better understanding of ACL status is an important consideration during in choosing TKA as opposed to unicompartmental arthroplasty. The status of the ACL should be considered in planning for implant choice in TKA., Competing Interests: Michael E. Berend, MD, John B. Meding, MD, Michael D. Jackson and Kenneth E. Davis MS have declared that they have no conflict of interest. Philip M. Faris, MD reports grants from Biomet, Inc, during the conduct of the study. Merrill A. Ritter, MD reports grants from Biomet, Inc, during the conduct of the study; personal fees from Iconacy Orthopaedic Implants, LLC, outside the work. Robert A. Malinzak, MD reports grants from Biomet, Inc, during the conduct of the study. John B. Meding, MD reports grants from Biomet, Inc, during the conduct of the study; personal fees from Biomet, Inc, outside the work. Human/Animal Rights All procedures followed were in accordance with the ethical standards of the responsible committee on human experimentation (institutional and national) and with the Helsinki Declaration of 1975, as revised in 2008 (5). Informed Consent Informed consent was waived from all patients for being included in the study. Required Author Forms Disclosure forms provided by the authors are available with the online version of this article.

Revision total knee arthroplasty (TKA) is becoming increasingly common as the population ages and the number of existing primary TKAs continues to increase. Revision TKA systems use a greater range of component modularity than primary TKA systems, including stems, augments, and varying levels of constraint. The purpose of this study was to retrospectively review the authors' institution's use of one specific revision knee implant system and its midterm results. The Vanguard SSK Revision Knee System (Biomet, Warsaw, Indiana) was implanted 297 times in 272 patients between 2005 and 2013. Average patient age was 67.2 years, average body mass index was 33 kg/m(2), and average follow-up was 4.8 years. The most common diagnoses leading to use of this system were failed previous TKA (45.5%) and periprosthetic infection (23.2%). The SSK system was used in 78 (26.3%) complex primary TKAs at the discretion of the operating surgeon. There were 22 failures: 12 septic and 10 aseptic. Of the 12 infections, 6 occurred after 2-staged treatment of periprosthetic joint infection, with all 6 of these reinfections having a different causative organism. Aseptic failures included aseptic loosening (n=3), periprosthetic fracture (n=2), patellar maltracking (n=2), instability (n=1), arthrofibrosis (n=1), and extensor mechanism disruption (n=1). Aseptic implant survivorship was 97.2%, 95.6%, 93.1%, and 93.1% at 1, 3, 5, and 7 years postoperatively, respectively. The Vanguard SSK demonstrates excellent performance at medium-range follow-up with respect to complications, clinical scores, and prosthesis survivorship. [Orthopedics.2016; 39(5):e833-e837.]., (Copyright 2016, SLACK Incorporated.)

Unlabelled: The development of a new total knee system as a successor prosthesis in total knee arthroplasty (TKA) requires clinical outcome improvement. 10,843 TKAs were performed of which 9169 utilized the Anatomical Graduated Component (AGC) and 1674 utilized the Vanguard prosthesis (both Biomet, Warsaw, IN). Survival rates at ten years postoperatively for the AGC and Vanguard were 98.7% and 98.4% (P=.4897) respectively. The top reasons for component failure were loosening (AGC: 0.29%, Vanguard: 0.30%), polyethylene wear, and instability (AGC: 0.13%, Vanguard: 0.12%). These results reveal similar outcomes in both designs, with relatively few revisions and high survival rates at ten years postoperatively., Summary: This abstract offers data concerning the usefulness of the Vanguard Total Knee System as a successor to the Anatomical Graduated Component., (Copyright © 2015 Elsevier Inc. All rights reserved.)

Background: The orthopedic literature has not shown a universal and replicated difference, outside of flexion, in clinical results between posterior cruciate ligament retention and posterior cruciate ligament substitution in total knee arthroplasty., Questions/purposes: This study was performed to compare the restoration of flexion and knee function in a large series of cruciate-retaining and cruciate-substituting total knee arthroplasties (TKRs). In addition, we aimed to study how other variables, such as those unique to each surgeon, may have affected the results., Patients and Methods: The current study evaluated 8,607 total knee arthroplasties in 5,594 patients performed by six surgeons, each using one of four prosthesis designs (two posterior cruciate ligament retaining, two posterior cruciate ligament substituting). Knees were compared at the level of cruciate-retaining and cruciate-substituting knees, at the level of the four prostheses, and at the level of surgeon-implant combinations. Least squared means scores were obtained through multiple linear regression, analysis of variance, and the maximum likelihood method., Results: At the level of posterior cruciate ligament treatment, posterior cruciate ligament substitution as a whole showed 3.2° greater flexion than posterior cruciate ligament retention. At the prosthesis level, cruciate-substituting models provided greater flexion and cruciate-retaining models provided higher function scores. In the surgeon-implant combinations, surgeons provided mixed results that often did not reflect findings from other levels; one surgeon's use of a posterior cruciate ligament retaining prosthesis achieved 14.7° greater flexion than the surgeon's use of a corresponding posterior cruciate ligament substituting design., Conclusions: Posterior cruciate ligament treatment is confounded by other variables, including the operating surgeon. The arthroplasty surgeon should choose a prosthesis based, not only on outside results, but also on personal experience and comfort.

Dislocation after total hip arthroplasty (THA) is multifactorial and is dependent on surgical, implant, and patient factors. We hypothesized that high preoperative hip range of motion is an important variable contributing to instability after THA. We retrospectively reviewed 3379 THAs performed during a 21-year period. Average follow-up was 6.6 years. We examined the effect of surgical approach, femoral head size, and preoperative range of motion on dislocation rates. Patients with a posterior approach and 115 degrees or greater of combined preoperative flexion, adduction, and internal rotation dislocated at a significantly higher frequency than those with less than 115 degrees of combined motion (odds ratio, 1.9; P = .007). High preoperative motion in conjunction with a posterior approach and femoral head size less than 32 mm had the highest dislocation rate in our sample (5.9%). Preoperative range of motion is an important variable that should be taken into consideration during operative planning to help reduce the risk of dislocation., (Copyright 2010. Published by Elsevier Inc.)

The most common previously reported modes of failure of unicompartmental knee arthroplasty (UKA) in the first and second decades are polyethylene wear, progression of arthritis, and component loosening. The purpose of this study is to describe an early mechanism of failure of the medial UKA. Thirty-two consecutive revisions from UKA to total knee arthroplasty were retrospectively reviewed. The predominant mode of failure observed in 15 (47%) of 32 knees was medial tibial collapse. Of these, 87% were an all-polyethylene design, and 7 of 15 failed in less than 16 months and required more complex reconstruction with stems, augments, and screws and cement. Increased tibial slope was associated with posterior tibial collapse. In our series, knees that failed by medial tibial collapse had more significant bone defects and required more complex reconstructions than is currently reported in the literature.

The purpose of this study is to report the outcome for a consecutive series of isolated nonmodular tibial component revisions. A consecutive series of 6548 total knee arthroplasties (6024 metal backed; 524 all-polyethylene) were performed with nonmodular tibial components of which 54 knees (0.82%) (22 metal backed; 32 all-polyethylene) underwent isolated tibial component revision with femoral component retention. Clinical outcome and component survivorship were examined. Pain scores improved from 19 to 42 points and Knee Society score improved from 62 to 87 points after revision. At a mean of 6.6-year follow-up, the survivorship of the revised tibial components and retained femoral components, with aseptic loosening as the end point, was 100%.

Background: Following total knee arthroplasty, some patients who fail to achieve >90 degrees of flexion in the early perioperative period may be considered candidates for manipulation of the knee under anesthesia. The purpose of this study was to assess the outcomes of manipulation following total knee arthroplasty., Methods: One hundred and thirteen knees in ninety patients underwent manipulation for postoperative flexion of < or =90 degrees at a mean of ten weeks after surgery. Flexion was measured with a goniometer prior to total knee arthroplasty, at the conclusion of the operative procedure, before manipulation, immediately after manipulation, at six months, and at one, three, and five years postoperatively., Results: Eighty-one (90%) of the ninety patients achieved improvement of ultimate knee flexion following manipulation. The average flexion was 102 degrees prior to total knee arthroplasty, 111 degrees following skin closure, and 70 degrees before manipulation. The average improvement in flexion from the measurement made before manipulation to that recorded at the five-year follow-up was 35 degrees (p < 0.0001, paired t test). There was no significant difference in the mean improvement in flexion when patients who had manipulation within twelve weeks postoperatively were compared with those who had manipulation more than twelve weeks postoperatively. Patients who eventually underwent manipulation had significantly lower preoperative Knee Society pain scores (more pain) than those who had not had manipulation (p = 0.0027)., Conclusions: Manipulation generally increases ultimate flexion following total knee arthroplasty. Patients with severe preoperative pain are more likely to require manipulation.

In the past, total knee arthroplasty, although very successful, was only indicated for an elderly population. Recently though, several papers have been published confirming that total knee arthroplasty is effective in younger patients. This paper supports the results of those papers. In our study, 207 total knee arthroplasties were performed on patients 55 years old and younger using a posterior cruciate-retaining prosthesis. There was an overall survival rate of 97.6% with an average follow-up of 9.1 years. There were some minor variations in the outcome of the operation based on diagnosis (osteoarthritis vs. rheumatoid arthritis). The success also continued over time with an estimated survival rate of 94.8% at 12 years. Total knee arthroplasty is an effective operation in patients younger then 55 years old.

Production and package sterilization techniques for the polyethylene used in acetabular components for total hip arthroplasties are known to affect wear. We considered three combinations of techniques: sterilization by radiation in inert gas with isostatically molded polyethylene, in inert gas and ram-extruded polyethylene, and in air with extruded polyethylene. The intent of this study was to confirm that molded polyethylene and polyethylene radiated in inert environments reduce wear rates in vivo, to determine the combination of methods with the least wear, and to determine how much variance in wear is attributable to these methods. We reviewed 150 consecutive total hip arthroplasties done in 133 patients using 28-mm cobalt-chrome femoral heads and polyethylene-lined, titanium, ring-locked acetabular components. The least wear occurred in gamma inert-molded polyethylene components. The mean volumetric wear rates were 52.12 mm3/year for gamma inert-molded, 62.32 mm3/year for gamma inert-extruded, and 66.09 mm3/year for gamma air-extruded polyethylene components. Relative risk assessment found gamma air-extruded and gamma inert-extruded polyethylene components to wear 16% and 11% more than gamma inert-molded polyethylene components, respectively. Gender, body mass index, and age accounted for the greatest amount of the explained variance in volumetric wear (57.5%, 21.6%, and 14.4, respectively), followed by angle of wear (3.4%), and sterilization and production technique (3.2%).

Two different methods for femoral component rotation in total knee arthroplasty (TKA) were compared with regard to the need for lateral retinacular release and 3-year follow-up knee society scores of both patellofemoral function and 3-year radiographs of the patella. The posterior condylar axis was used in 1322 consecutive primary TKAs, and the transepicondylar axis (TEA) was used in 1059 consecutive primary TKA. A significant decrease in lateral retinacular release was observed from 56.9% (752 knees) using the posterior condylar axis down to 12.3% (130 knees) using the TEA. No significant differences in knee society scores were observed between the 2 groups with regard to stair climbing, pain, patella radiographs, or range of motion. Routine use of the TEA is recommended for determining femoral component rotation in TKA.

Although medialization of the patellar component during primary total knee arthroplasty (TKA) has been advocated for biomechanical reasons, this can lead to lateral patellar contact with the femoral component. Using blinded radiographic evaluations, we evaluated 980 consecutive primary TKAs performed from 1997 to 1998. The prevalence of lateral patellar contact in this series was found to be 46.1%. Lateral patellar contact was not correlated with significant differences in our measures of outcome (knee score [P = .1066], functional score [P = .2457], or range of motion [P = .2514]). The average pain score in knees with lateral patellar contact was higher (48.1) (less pain) when compared with knees without (46.7). Total knee arthroplasties without lateral patellar contact had a 1.61 times odds of experiencing postoperative pain compared with those TKAs with lateral patellar contact (P = .0025).

The effect of total knee arthroplasty (TKA) on the Insall-Salvati ratio (ISR) and the effect of the ISR on the outcome of TKA have not been clearly established. A retrospective review of 1055 primary TKAs performed in 1997 to 1998 was performed. Radiographic measurements were made preoperatively and postoperatively, and the ISR was calculated. Regression analysis was performed to determine the effects of these variables on range of motion (ROM), Knee Society Score, and stair, function, and pain scores. Total knee arthroplasty resulted in a decrease in the patella tendon length, as measured by the ISR in 50% of cases. Patella infera (ISR less than 0.8) developed postoperatively in 9.8% of TKAs and was twice as likely to occur in women as men. A decrease in the ISR was associated with diminished stair and function scores (P = .0004 and 0.0081, respectively). There was no effect of the ISR upon ROM, Knee Society Score, or pain scores. Optimal outcomes occurred in patients where the ISR was not decreased after TKA, with superior stair and function scores.

Four hundred seven primary total hip arthroplasties were performed using a cemented, direct compression molded all-polyethylene acetabular component. Based on a double-blinded randomization schedule, one group received acetabular cups with cement spacers made from polyethylene integrated into the cup, whereas the other group received the same acetabular cups with the polyethylene spacers removed. Patients were followed up for an average of 6.5 years. During this follow-up period, there were 3 revisions for acetabular cup loosening and 40 acetabular cups that had a global radiolucent line at least 1 mm wide. Acetabular cups with polyethylene spacers were found to have a significantly higher initial rate of failure (P < .0380) when compared with cups without cement spacers. Yet, polyethylene spacers resulted in a significantly thicker and more uniform cement mantle in zones 1, 2, and 3 (P < .0001). Cups initially placed at an angle of 45.0 degrees to 50.5 degrees had the highest survival rate compared with all possible angle ranges (P < .0158).

A consecutive series of 220 primary posterior-cruciate ligament-retaining total knee replacements were done in 148 patients with rheumatoid arthritis. From this group, 212 total knee replacements (141 patients) were followed up for an average of 10 years. Average knee scores at 5, 10, 15, and 20 years after operation improved to 86, 83, 88, and 89, respectively, and average function scores improved to 70, 72, 64, and 88, respectively. Five knees (2.4%) were revised for deep infection. Posterior instability, recurvaum, or mediolateral instability, combined or otherwise, occurred in 15% (32 knees; in 31 patients). Three tibial components (1.4%) were revised: one for suspected aseptic loosening and two for instability. Excluding infections and failed metal-backed patellas, Kaplan-Meier survival rates were 99.5%, 97.9%, and 96.5%, respectively. Favorable long-term results may be achieved with posterior-cruciate ligament-retaining total knee replacements in patients with rheumatoid arthritis. Concern remains, however, about rotational instability in certain cases associated with preoperative genu-valgum and ipsilateral planovalgus deformity.

The purpose of this study was to examine the failure mechanisms and factors associated with failure of a nonmodular metal backed cemented tibial component. Out of 3152 total knee replacements done for osteoarthritis, 41 tibial components had been revised (1.3%). Four distinct failure mechanisms were identified: 20 knees were revised for medial bone collapse, 13 for ligamentous imbalance, 6 for progressive radiolucencies, and 2 for pain. Factors associated with medial bone collapse were varus tibial component alignment more than 3.0 degrees , Body Mass Index higher than 33.7, and overall postoperative varus limb alignment. Ligamentous imbalance was more prevalent in knees with preoperative valgus deformity. There were no knees revised for tibial component polyethylene wear or osteolysis. We conclude that the dominant failure mechanisms for this component design are related to preoperative deformity, technical factors of component alignment, overall limb alignment, and ligamentous imbalance.

Of 8,014 surgeries between January 1986 and August 2000, 82 primary total knee arthroplasties (TKAs) were performed on 75 patients with severe preoperative varus or valgus deformity of greater than or equal to 20 degrees with a minimum 2-year follow-up time and a posterior cruciate retaining prosthesis. This study was designed to determine whether these patients (group A) could be as successful, using a Knee Society score (KSS) and alignment, as a matched control group (group B). There was no statistical difference in knee score, alignment, or revision. One revision was performed among the severely deformed. Knees that had severe angular deformities performed as well as deformity-free TKAs. Patients with excessive deformity should not be excluded from surgical correction solely based on this deformity.

We investigated the long-term changes in the Harris Hip and Knee Society scores (HSS and KSS) to determine whether they result from overall functional decline rather than actual changes in the condition of the prosthesis. The HHS for 106 total hip arthroplasties with a minimum follow-up of ten years, no medical complications after operation and no evidence of radiological loosening, and the KSS for 264 total knee arthroplasties with a minimum follow-up of 12 years and no medical complications after operation or signs of radiographical loosening were evaluated. There were statistically significant drops in the functional scoring components of the joint evaluation systems despite no loosening of the prostheses or other significant medical complications. The HHS declined at an average of 0.67 points per year from between three and ten years after operation (p < 0.0001). Contributing to this were deterioration in gait and limp (p < 0.0004), the use of support aids (p < 0.0001), the distance walked (p < 0.0001) and the ability to climb stairs (p < 0.0455). The functional component of the KSS declined significantly at an average 0.88 points per year betwen the third and 12th years (p < 0.0001). There were significant declines in every component of the functional score including the distance walked (p < 0.0001), the ability to climb stairs (p < 0.0001) and the use of support aids (p < 0.0001). The knee score component of the KSS did not decline significantly (p < 0.9750). The combination of functional and pain scores within the HHS system leads to an inaccurate decline in the entire score. The decline of HHS and Knee Society functional scores in total joint arthroplasties, in the absence of implant-related problems, suggests that deterioration in the functional capacity of ageing patients is an important factor in longitudinal studies using these scoring systems.

Background: The long-term results of total hip arthroplasty without cement have been reported only rarely. The purpose of the present study was to evaluate the minimum ten-year results of primary total hip arthroplasty performed with use of a proximally porous-coated, plasma-sprayed, straight-stemmed, titanium-alloy femoral component., Methods: The clinical and radiographic results of a consecutive series of 105 total hip replacements in ninety-five patients were reviewed ten to twelve years postoperatively. The diagnosis was osteoarthritis for seventy-seven hips (73%). The clinical result was evaluated on the basis of the Harris hip score, complications, and thigh pain. A detailed radiographic analysis was performed at each follow-up visit. Kaplan-Meier analysis was performed to evaluate the survival of the femoral component., Results: The average Harris hip score improved from 46 points preoperatively to 92 points postoperatively. The average pain score at the time of the most recent follow-up was 42 points, with eighty-three hips (79%) rated as pain-free. Thigh pain was identified in only two patients. All radiolucent lines were seen around the tip of the stem. All hips had some degree of femoral remodeling consistent with osseous ingrowth. No femoral component was revised, and no femoral component had evidence of loosening. Eight acetabular components were revised because of loosening and wear, and one was revised because of recurrent dislocation. One focal femoral osteolytic lesion was seen., Conclusions: This femoral component afforded durable fixation at ten to twelve years after primary total hip arthroplasty., Level of Evidence: Therapeutic study, Level IV (case series [no, or historical, control group]). See Instructions to Authors for a complete description of levels of evidence.

This study examined the effect of the surgical approach used in total hip arthroplasty (THA) on gait mechanics six months following surgery. Quantitative gait analysis was performed on 29 subjects: 10 anterolateral (A-L) and 10 posterolateral (P-L) THA patients and nine able-bodied, velocity-matched subjects. Discriminant function analysis was used to determine the distinction of the groups with respect to sagittal plane hip range of motion, index of symmetry, trunk inclination, pelvic drop, hip abduction, and foot progression angles. The A-L group had the largest trunk inclination (3.0+/-2.4 degrees) and the smallest hip range of motion (34.0+/-7.4 degrees). Both THA groups demonstrated greater asymmetry as expressed by the smaller symmetry index (0.97+/-0.04 for A-L and 0.98+/-0.05 for the P-L) than the able-bodied group (0.99+/-0.01). The classification procedure correctly classified 89% of the control group cases, 90% of the A-L cases, and 50% of the P-L cases. These results support the conclusion that six months following surgery, the gait of the majority (85%) of THA patients has not returned to normal. The A-L patients displayed distinct gait patterns, while a small percentage (30%) of the P-L patients demonstrated normal gait. While these differences are statistically significant, the clinical significance is unknown and linked to the duration that they persist.

Interest in unicompartmental knee arthroplasty (UKA) for the treatment of medial compartment osteoarthritis has increased in recent years with apparent improvement in the long-term results. This is a result of improved surgical technique, patient selection, and implant design. In an effort further to improve patient selection we analysed the relationship between the pre-operative alignment of the knee and the anatomical findings at the time of surgery. We compared these findings with the indications for UKA. From 4021 total knee arthroplasties we compared intra-operative observations with the pre-operative clinical data in order to identify knees with isolated, medial, compartment changes, which would have been ideal candidates for UKA. We found that only 247 of the knees (6.1%) met anatomical qualifications for isolated, medial, unicompartmental osteoarthritis, and of these, only 168 (4.3%) met clinical standards ideal for UKA. Preoperative alignment showed a significant relationship with patterns of disease. Logistic regression revealed a relationship between pre-operative alignment and intraoperative findings resembling a Gaussian distribution. Patients with a pre-operative varus alignment of 7 degrees were slightly more likely to be selected for UKA. But the further the anatomical alignment in either direction varies from 7 degrees of varus, the more unlikely it is for the knee to exhibit a disease pattern of isolated, medial, unicompartmental osteoarthritis.

Genu recurvatum deformities are unusual before total knee arthroplasty (TKA), occurring in less than 1% of patients. Because of its rarity, concern may exist regarding the recurrence of the deformity and the potential for instability after TKA. Recurvatum may be associated with a severe osseous deformity, including genu valgum, capsular or ligamentous laxity, and, rarely, neuromuscular disease. In the presence of the latter, a plantarflexion contracture of the ankle also may be present. Therefore, specific attention should be given preoperatively to evaluation of the quadriceps, hamstrings, and gastrocnemius complex. Because genu recurvatum is known to recur in patients with certain neuromuscular disorders, the etiology of the hyperextension deformity must be elucidated thoroughly before surgery. In the absence of neuromuscular disease, however, hyperextension deformities tend not to recur after TKA. Care should be taken to avoid even mild degrees of residual instability in the coronal plane at surgery because this is associated with increased extension in the postoperative period.

The purpose of the current study was to review the results of total knee replacement (TKR) in patients with diabetes mellitus and to test the hypothesis that patients with diabetes achieve inferior results after TKR. From a consecutive series of 5220 primary cemented TKRs, 363 were done in 291 patients with diabetes mellitus. Cefuoxime-impregnated cement was used routinely. The results in the study group were compared with the results in the patients without diabetes who had TKR during the same period. The followup averaged 52 months. Knee scores were higher in patients with diabetes preoperatively (47 versus 38) and postoperatively up to 7 years (80 versus 75). The average preoperative and postoperative pain scores also were higher in patients with diabetes. Four deep infections (1.2%) occurred in patients with diabetes versus 35 deep infections (0.7%) in patients without diabetes. The revision rate (including infections) was greater in patients with diabetes (3.6% versus 0.4 %). Knee and pain scores were similar in patients with insulin-dependent and noninsulin-dependent diabetes. Postoperative function scores, however, were lower in patients with insulin-dependent diabetes. In the study group, all deep infections occurred in patients with insulin-dependent diabetes.

The purpose of the current study was to evaluate and determine the mechanism and etiology of failure of components that failed in long-term followup of Anatomic Graduated Component total knee replacements. The authors previously reported the survivorship of 4583 Anatomic Graduated Component total knee arthroplasties done during a 17-year period. The current study was done to evaluate the etiology and cause of failure of the components that failed. There were six (0.18%) failures of the femoral component. There were 21 tibia components that failed (0.46%). Twelve tibial components failed because of an osteonecrotic lesion in the medial tibia plateau. The clinical survival rate with revision or loosening of one or more components was 98.9% at 15 years. No component was revised for polyethylene wear or osteolysis. This total knee replacement has proved to have minimal wear and excellent longevity with time with no revisions between 10 and 15 years despite having nearly flat-on-flat geometry and retaining the posterior cruciate ligament. The most common cause for revision (12 tibial components) was because of an osteonecrotic lesion in the medial tibia plateau, which developed after surgery and led to loosening.

One-staged ipsilateral and contralateral total hip and total knee arthroplasties were compared. A total of 103 patients underwent a 1-staged total knee arthroplasty and total hip arthroplasty between January 1975 and July 1997 (67 contralateral and 36 ipsilateral patients). No prostheses were found to be loose or revised. The contralateral group had a 10.5% hip dislocation rate, and the ipsilateral group had an 8.3% hip dislocation rate. Most of the patients were discharged home (contralateral, 66%; ipsilateral, 56%). There was no significant difference in survival between the contralateral and ipsilateral groups. There was only 1 death within 3 months of the operation. The severity of these patients' deformity may necessitate these procedures be done at 1 operation with consideration of mortality and morbidity risks., (Copyright 2002, Elsevier Science (USA). All rights reserved.)

A polyethylene-free, metal-on-metal acetabular system (M2a-taper [Biomet, Inc., Warsaw, IN]) was designed in an effort to improve total hip arthroplasty (THA) longevity. Minimum 2-year follow-up results involving 72 polyethylene liner THAs and 78 metal liner THAs from a multicenter, randomized, controlled, investigational device exemption study are reported. Mean Harris hip scores of 95.54 (polyethylene liner group) and 95.23 (metal liner group) were reported at mean follow-up intervals of 3.29 and 3.23 years. Radiographic evaluation revealed no evidence of early failure. No acetabular components have been revised or are pending revision. No statistically significant differences in the data were calculated between liner types except for the immediate postoperative (P=.0415) and minimum 2-year follow-up (P=.0341) angles of inclination. The M2a-taper metal-on-metal articulation may represent a viable alternative for THA in younger, higher demand patients.

Between June 1987 and March 1997, 57 total knee replacements were done in 53 patients with at least 5 degrees hyperextension deformity as measured on physical examination. The average recurvatum measured 11 degrees (range, 5 degrees-20 degrees). No cases of major ligamentous instability, neuromuscular disease, or inflammatory arthropathy were identified before surgery. Before surgery, Knee Society knee, function, and pain scores averaged 41 points, 41 points, and 13 points, respectively. A posterior cruciate-retaining prosthesis was implanted in all patients. The followup averaged 4.5 years (range, 3-10 years). Knee, function, and pain scores improved to 81 points, 78 points, and 43 points, respectively. Postoperative extension averaged 0 degrees (neutral) (range, 10 degrees hyperextension-10 degrees contracture). Only two (3.5%) knees had a hyperextension deformity after surgery. Both deformities measured 10 degrees and were in patients with a preoperative diagnosis of osteoarthritis. At final followup, no knee replacement was revised for any reason. In addition, only one case of a progressive radiolucent line greater than 1 mm (tibial Zone 7) was observed. Although the etiology of a hyperextension deformity should be elucidated before surgery, its presence does not preclude a well-functioning total knee replacement.

A consecutive series of 387, one-piece, 8-mm tibial components were implanted in 313 patients. All tibial prostheses were manufactured with 4.4 mm of polyethylene directly molded to a 3.6 mm cobalt chrome metal baseplate. The average age of the patients at surgery was 70.6 years. From this group, a subset of 116 patients underwent bilateral total knee arthroplasties with an 8-mm tibial component on one side and at least a 10-mm thick tibial component (at least 6.4 mm of polyethylene) on the other side. The followup averaged 10.7 years. Postoperative knee and pain scores average 81.4 points and 47.2 points, respectively. No radiographic polyethylene wear or osteolytic lesions were identified. Tibial radiolucencies were observed in four knees. There were nine failures (2.3%). Three knees were revised for infection. Five knees were revised for metallosis secondary to failure of metal-backed patellas. No loose tibial components were identified. Defining failure as revision for any reason or loosening of any component, Kaplan-Meier survival rates at 5, 10, and 15 years were 98.7%, 95.4%, and 94.3%, respectively. There was no significant difference in clinical scores or survival rates between the knee components with thicker (at least 6.4 mm) or thinner (4.4 mm) polyethylene.

The purpose of the current study was to evaluate the authors' 15-year experience with the Anatomic Graduated Components total knee replacement. This is a report of the survivorship of 4583 Anatomic Graduated Component total knee arthroplasties. Kaplan-Meier survival analyses were performed with the end point defined as radiographic loosening, revision, or both. This end point was subdivided into the best case scenario in which it was assumed that all the patients lost to followup were doing well throughout the study and a worst case scenario in which it was assumed that all patients lost to followup had failed results at their last clinic visit. There were six (0.18%) femoral, 21 (0.46%) tibial, and 180 (4.2%) all-polyethylene patellar component failures secondary to aseptic loosening. All femoral components and 90% of the tibial components were revised; however, only 15 patellar components were revised. The clinical survival rate with revision of one or more of the components was 98.86% at 15 years. Despite having nearly flat-on-flat geometry and retaining the posterior cruciate ligament, which should increase the stresses in the polyethylene and at the bone-cement interface, this total knee replacement has proved to have minimal wear and excellent longevity with time. The authors think this is a result of the direct compression molded polyethylene articulation and the nonmodular configuration that incorporates metal backing on the tibial component and eliminates back-sided tibial component polyethylene wear.

The patellar component of total knee replacement is the most frequent source of nonseptic complications after total knee arthroplasty. The purpose of the current study was to review the radiographic factors associated with loosening of all-polyethylene patellar components. Four thousand five hundred eighty-three cases of Anatomic Graduated Components total knee replacements were performed at the authors' institution during the past 15 years. Radiographs were reviewed and loosening was defined as global radiolucency or component migration. Four thousand two hundred eighty-seven allpolyethylene patellar components were implanted. There were 180 (4.2%) loose all-polyethylene patellar components. The mean time to loosening was 2.6 years (+/- 1.75 years). Fifteen (0.3%) patellar components required revision. Five radiographic features were associated with failure. The incidence and mean time of appearance were recorded: (number; incidence; time) (1) Bone-cement radiolucency, n = 174, 96.7%, 1.4 years; (2) increased density, n = 118, 65.6%, 1.8 years; (3) trabecular collapse of the bone, n = 160, 88.9%, 2.3 years; (4) patella fracture and fragmentation, n = 133, 73.9%, 2.5 years; and (5) lateral subluxation of the residual patella bone, n = 146, 81.1%, 2.9 years. Lateral retinacular release was associated with an increased rate of patellar loosening. Loosening of the allpolyethylene patella component is an avascular process strongly associated with lateral retinacular release and for which the patient infrequently requires revision surgery.

Patients who had anterolateral and posterolateral approaches in total hip replacement surgery were compared clinically for limp, dislocation, hospital stay, and discharge disposition. The only statistical difference was that the posterior approach had a statistically higher dislocation rate. Although the number of patients with limp was higher in the anterolateral group, the difference was not statistically different.

This controlled study compared the strength and porosity of 48 polymethylmethacrylate cement-implant constructs prepared with open bowl versus vacuum mix technique. Forty-eight blast finished stainless steel rods of 13 mm diameter were implanted with centralizers into 17-mm inner diameter tubes that had been retrograde filled with polymethylmethacrylate cement. The eight cement preparations used were open bowl and vacuum mixed Simplex, Osteobond, Zimmer Dough Type, or Palacos R. Six replications of each condition were performed. The tubes were maintained at 37 degrees C. Each tube was cut transversely into five segments. The center three segments were used for data analysis: pushout strength, cycles to failure, and interface porosity analysis. Rod pushout data showed there was no significant difference between open bowl and vacuum mixed samples when all cement brands were combined. Mean sheer force for Palacos R vacuum mixed samples was greater than open bowl (634+/-47 versus 423+/-171), whereas the force for the Zimmer Dough Type cement open bowl was greater than that of the vacuum mixed samples (901+/-71 versus 705 +/-82). Cycles to failure data did not show significant differences when open bowl and vacuum mixed samples were compared when cements were analyzed individually or combined. Image analysis of cement-implant interfaces showed that vacuum mixing reduced void area significantly compared with open bowl mixing in the Palacos R and Osteobond preparations. Vacuum mixing does not appear to reduce cement prosthesis interface porosity or improve its mechanical properties in all cements.

The preoperative radiographs of 1,888 patients undergoing 2,759 consecutive total knee arthroplasties (TKAs) performed for osteoarthritis (OA) were retrospectively reviewed to test the hypothesis that patients with less severe OA changes experience less pain relief and lower function scores after TKA. Age at surgery averaged 70.6 years, and follow-up averaged 2.5 years. Preoperatively, pain was independent of an arthritis grade, and this likewise was noted at > or =3 years after surgery. Patients with severe and mild radiographic changes of OA eventually experienced the same degree of function and pain relief after TKA.