Search

Abstract Guayule (Parthenium argentatum Gray) is a semi-arid shrub, native from the Chihuahan desert. This plant produces polyisoprene and resin. Polyisoprene is the main focal point of many researches, from structure to properties. Today, some processes are used to extract polyisoprene under its dry form, using solvent extraction, to produce rubber (used in truck or airplane tires) or as an emulsion, to make latex products by dipping (used in medical gloves, condoms, etc.). This article focuses on guayule resin which has some interesting applications in adhesives, coatings, pharmaceuticals, etc. In order to better know the resin composition and to be able to perform comparisons between varieties or seasons, liquid and gas chromatographic analysis methods have been described, for the groups of molecules composing the resin (polyphenols, guayulins, free fatty acids, di and triacylglycerols, argentatins, alkanes, alkanals, sugars, organic acids). Unlike other articles, this study aims to analyze all components of the same resin; the average composition of a guayule resin is given.

Proteins from alternative sources including terrestrial and aquatic plants, microbes and insects are being increasingly explored to combat the dietary, environmental and ethical challenges linked primarily to conventional sources of protein, mainly meat and dairy proteins. Ultrasound (US) technologies have emerged as a clean, green and efficient methods for the extraction of proteins from alternative sources compared to conventional methods. However, the application of US can also lead to modifications of the proteins extracted from alternative sources, including changes in their nutritional quality (protein content, amino acid composition, protein digestibility, anti-nutritional factors) and allergenicity, as well as damage of the compounds associated with an increased degradation resulting from extreme US processing conditions. This work aims to summarise the main advances in US equipment currently available to date, including the main US parameters and their effects on the extraction of protein from alternative sources, as well as the studies available on the effects of US processing on the nutritional value, allergenicity and degradation damage of these alternative protein ingredients. The main research gaps identified in this work and future challenges associated to the widespread application of US and their scale-up to industry operations are also covered in detail.

Water is considered the greenest solvent. Nonetheless, the water solubility of natural products is still an incredibly challenging issue. Indeed, it is nearly impossible to solubilize or to extract many natural products properly using solely water due to their low solubility in this solvent. To address this issue, researchers have tried for decades to tune water properties to enhance its solvent potential in order to be able to solubilise or extract low-water solubility compounds. A few methods involving the use of solubilisers were described in the early 2000s. Since then, and particularly in recent years, additional methods have been described as useful to ensure the effective green extraction but also solubilisation of natural products using water as a solvent. Notably, combinations of these green methods unlock even higher extraction performances. This review aims to present, compare and analyse all promising methods and their relevant combinations to extract natural products from bioresources with water as solvent enhanced by green solubilisers and/or processes.

Olive pomace is the main by-product generated by the olive oil production process. Although toxic to the environment, olive pomace is an important source of natural antioxidants due to its high content of phenolic compounds. The aim of the current study is to maximize the extraction yields of the main phenolic compounds present in olive pomace using innovative green technologies. For this purpose, the present work is divided into two parts. The first part is based on a solubility study of targeted phenolic compounds in various ethanol/water ratios at two different temperatures (20 °C and 50 °C). A computational prediction using COSMO-RS software was applied for the calculation of eventual solubility, which was subsequently confirmed by practical experiments. The determination of the optimal extraction conditions of solvent ratio (EtOH/H2O) (60:40 v/v) and temperature (50 °C) led to the second part of the work, which concerns the intensification of extraction yields. Furthermore, various green extractions using innovative technologies, including accelerated solvent extraction (ASE), ultrasound with its both system (probe (UAE-P) and bath (UAE-B)), bead milling (BM) and microwave (MAE), were carried out and then compared to conventional maceration (CM). Results showed that ASE was the most effective method for extracting phenolic compounds from dried olive pomace powder (5.3 milligrams of tyrosol equivalent (TE) per gram of dried olive pomace powder (DOP)) compared to CM (3.8 mg TE/g DOP).

Hexane is a solvent used extensively in the food industry for the extraction of various products such as vegetable oils, fats, flavours, fragrances, colour additives or other bioactive ingredients. As it is classified as a “processing aid”, it does not have to be declared on the label under current legislation. Therefore, although traces of hexane may be found in final products, especially in processed products, its presence is not known to consumers. However, hexane, and in particular the n-hexane isomer, has been shown to be neurotoxic to humans and has even been listed as a cause of occupational diseases in several European countries since the 1970s. In order to support the European strategy for a toxic-free environment (and toxic-free food), it seemed important to collect scientific information on this substance by reviewing the available literature. This review contains valuable information on the nature and origin of the solvent hexane, its applications in the food industry, its toxicological evaluation and possible alternatives for the extraction of natural products. Numerous publications have investigated the toxicity of hexane, and several studies have demonstrated the presence of its toxic metabolite 2,5-hexanedione (2,5-HD) in the urine of the general, non-occupationally exposed population. Surprisingly, a tolerable daily intake (TDI) has apparently never been established by any food safety authority. Since hexane residues are undoubtedly found in various foods, it seems more than necessary to clearly assess the risks associated with this hidden exposure. A clear indication on food packaging and better information on the toxicity of hexane could encourage the industry to switch towards one of the numerous other alternative extraction methods already developed.

Full analytical data of Ecuadorian cocoa wastes (raw shells) and beans (as benchmark), are herein reported. A detailed characterization of production residues may pave the road to a zero-waste strategy for the cocoa industry. Multiple analytical techniques have been exploited to define the composition of the matrices, among them: elemental analyses, FTIR, Py-GC/MS/FID and UHPLC-ESI-MS/MS.Quali-quantitative data of carbohydrates, lipids, lignin, polyphenols, alkaloids and proteins have been obtained by Py-GC/MS/FID and UHPLC-ESI-MS/MS. Assignations are fully supported by literature references. The FAMEs composition of lipophilic UAE extract is also reported for sake of comparison with cocoa butter. This data collection completes a wider valorization work, “Cocoa bean shell waste valorisation; extraction from lab to pilot-scale cavitational reactors” (Grillo et al., 2018).

Chloropinane and chloromenthene, synthesized from pinene and limonene, respectively, were compared with their non-halogenated analogs and n-hexane for their ability to solubilize natural products of interest such as β-carotenoids, vanillin, and rosmarinic acid. Chloropinane was six times more efficient than hexane for β-carotene solubilization. Chloromenthene was 15 times better than hexane. Vanillin was 20 times more soluble in chloropinane than in hexane. Chloropinane and chloromenthene were 3.5 and 2 times more efficient than hexane for rosmarinic acid solubilization. Obtained from pinene and limonene, two very abundant natural products, and even from their waste byproducts, chloropinane and chloromenthene can be an alternative to solvents from non-renewable resources.

Despite its severe toxicity and negative environmental impact, hexane remain the solvent of choice for the extraction of vegetable oils. This is in contrast with the constantly growing demand for sustainable and green extraction processes. In recent years a variety of alternatives to hexane have been reported, among them 2-methyloxolane (2-MeOx), which has emerged as a promising bio-based alternative. This study evaluates the possibility of replacing hexane, in the extraction of olive pomace (OP), with 2-MeOx, both dry and saturated with water (4.5%), the latter of which is called 2-MeOx 95.5%. The three solvents have been compared in terms of extraction yield and quality, as well as the lipid and polyphenol profiles of the extracts. The work concluded that both dry 2-MeOx and 2-MeOx 95.5% can replace hexane in OP extraction, resulting in higher yields and extracts richer in phenolic compounds. This study should open the road to further semi-industrial scale investigations toward more sustainable production processes.

Cocoa husk is considered a waste product after cocoa processing and creates environmental issues. These waste products are rich in polyphenols, methylxanthine, dietary fibers, and phytosterols, which can be extracted and utilized in various food and health products. Cocoa beans represent only 32–34% of fruit weight. Various extraction methods were implemented for the preparation of extracts and/or the recovery of bioactive compounds. Besides conventional extraction methods, various studies have been conducted using advanced extraction methods, including microwave-assisted extraction (MAE), ultrasonic-assisted extraction (UAE), subcritical water extraction (SWE), supercritical fluid extraction (SFE), and pressurized liquid extraction (PLE). To include cocoa husk waste products or extracts in different food products, various functional foods such as bakery products, jam, chocolate, beverage, and sausage were prepared. This review mainly focused on the composition and functional characteristics of cocoa husk waste products and their utilization in different food products. Moreover, recommendations were made for the complete utilization of these waste products and their involvement in the circular economy.

Bio-based solvents menthene and menthane were obtained through limonene’s partial and total hydrogenation under various catalytic conditions. Heterogeneous catalysts based on different active metals and supports (carbon, alumina, and silica) were systematically tested for solvent-free total and partial hydrogenation of limonene under high and low hydrogen pressure. Influences of these catalysts on the formation of menthene, menthane, and cymene, a dehydrogenated product, were determined. The impact of water addition on the conversion and selectivity of the catalysts was also investigated. Amongst all tested catalysts, Rh/Alumina which was never tested for total and partial hydrogenation of limonene was the most effective as 1-menthene was quantitatively produced at low pressure (0.275 MPa) while menthane was mostly obtained at a higher pressure (2.75 MPa). Water addition on Rh/Alumina favoured menthene production even at high pressure. To propose menthane, menthene, and menthane/menthene mixture as an alternative to fossil-based solvents such as n-hexane for the extraction of natural products, β-carotene, vanillin, and rosmarinic acid solubilizations have been investigated. If a modeling approach using COSMO-RS software predicted a comparable solubilization of these 3 compounds for the 3 solvents, experimental assays revealed that menthene solubilizes β-carotene, vanillin, and rosmarinic acid three to five times better than n-hexane.

Interest in essential oils has consistently increased in recent years. Essential oils have a large variety of applications in multiple fields, including in the food, cosmetics and pharmaceutical industries. The volatile fraction (VF) in hops (Humulus lupulus L.) fits within this domain as it is primarily used in the brewery industry for the aromatization of beer, and is responsible for the floral and fruity tones. This work aims to design an optimized extraction protocol of the VF from hops, using microwaves. Microwave-assisted hydrodistillation (MAHD) has been developed to reduce energy and time consumption in lab-scale reactors up to industrial-scale systems. Hops are principally available in three forms, according to a brewery’s applications: (i) fresh (FH); (ii) dried (DH) and (iii) pelletized (PH). In this work, all three forms have therefore been studied and the recovered volatiles characterized by means of GC-MS. The optimized lab-scale MAHD protocol gave the best extraction yield of 20.5 mLVF/kgdry matrix for FH. This value underwent a slight contraction when working at the highest matrix amount (3 kg), with 17.3 mLVF/kgdry matrix being achieved. Further tests were then performed in a pilot reactor that is able to process 30 kg of material. In this case, high yield increases were observed for PH and DH; quadruple and double the lab-scale yields, respectively. In addition, this industrial-scale system also provided marked energy savings, practically halving the absorbed kJ/mLVF.

Citrus genus is a prominent staple crop globally. Long-term breeding and much hybridization engendered a myriad of species, each characterized by a specific metabolism generating different secondary metabolites. Citrus aurantium L., commonly recognized as sour or bitter orange, can exceptionally be distinguished from other Citrus species by unique characteristics. It is a fruit with distinctive flavor, rich in nutrients and phytochemicals which possess different health benefits. This paper presents an overview of the most recent studies done on the matter. It intends to provide an in-depth understanding of the biological activities and medicinal uses of active constituents existing in C. aurantium. Every plant part is first discussed separately with regards to its content in active constituents. All extraction methods, their concepts and yields, used to recover these valuable molecules from their original plant matrix are thoroughly reported.

Solvent-free microwave extraction (SFME) is a combination of microwave heating and dry distillation performed at atmospheric pressure without the addition of water or organic solvents that has been proposed as a green method for the extraction of essential oils from aromatic and medicinal herbs. In this work, SFME and the conventional techniques of steam distillation (SD) and hydrodistillation (HD) were compared with respect to the extraction and antioxidant and antimicrobial activities of Thymus mastichina essential oil. The main constituent of essential oils obtained using different methods was 1,8-cineole (eucalyptol). The results showed that the essential oils extracted by means of SFME in 30 min were quantitatively (yield) and qualitatively (aromatic profile) similar to those obtained using conventional HD over 120 min. In addition, SFME generates less waste and less solvent, consumes less energy, and provides a higher yield for a shorter extraction time, which is advantageous for the extraction of the T. mastichina essential oil compared to SD. The antioxidant and antimicrobial activities of the T. mastichina essential oil obtained from either SFME or conventional extraction methods (SD or HD) showed a similar pattern. Large-scale experiments using this SFME procedure showed a potential industrial application.

With the introduction of Industry 4.0, and smart factories accordingly, there are new opportunities to implement elements of industry 4.0 in nonthermal processing. Moreover, with application of Internet of things (IoT), smart control of the process, big data optimization, as well as sustainable production and monitoring, there is a new era of Internet of nonthermal food processing technologies (IoNTP). Nonthermal technologies include high power ultrasound, pulsed electric fields, high voltage electrical discharge, high pressure processing, UV-LED, pulsed light, e-beam, and advanced thermal food processing techniques include microwave processing, ohmic heating and high-pressure homogenization. The aim of this review was to bring in front necessity to evaluate possibilities of implementing smart sensors, artificial intelligence (AI), big data, additive technologies with nonthermal technologies, with the possibility to create smart factories together with strong emphasis on sustainability. This paper brings an overview on digitalization, IoT, additive technologies (3D printing), cloud data storage and smart sensors including two SWOT analysis associated with IoNTPs and sustainability. It is of high importance to perform life cycle assessment (LCA), to quantify (En)—environmental dimension; (So)—social dimension and (Ec)—economic dimension. SWOT analysis showed: potential for energy saving during food processing; optimized overall environmental performance; lower manufacturing cost; development of eco-friendly products; higher level of health and safety during food processing and better work condition for workers. Nonthermal and advanced thermal technologies can be applied also as sustainable techniques working in line with the sustainable development goals (SDGs) and Agenda 2030 issued by United Nations (UN).

Natural rubber is an essential material, especially for plane and truck tyres but also for medical gloves. Asia ranks first in the production of natural rubber, of which the Hevea tree is currently the sole source. However, it is anticipated that this source alone will not be able to fulfill the growing demand. Guayule, a shrub native to northern Mexico and southern United States, may also contribute. This plant not only contains polyisoprene, but also resin, a mixture of lipids and terpenoids. This review summarizes various aspects of this plant, from the usage history, botanical description, geographical distribution and cultivation practices, down to polyisoprene and resin biosynthesis including their distribution within the plant and molecular composition. Finally, the main processes yielding dry rubber or latex are depicted, as well as the properties of the various extracts along with economic considerations. The aim is to provide a wide picture of current knowledge available about this promising crop, a good feedstock candidate for a multiple-product biorefinery.

We investigated the impact of ultrasound at 20 kHz on olive leaves to understand how acoustic cavitation could increase polyphenol extraction. Application of ultrasound to whole leaf from 5 to 60 min enabled us to increase extraction from 6.96 to 48.75 µg eq. oleuropein/mL of extract. These results were correlated with Environmental Scanning Electron Microscopy, allowing for leaf surface observation and optical microscopy of treated leaf cross sections to understand histochemical modifications. Our observations suggest that the effectiveness of ultrasound applied to extraction is highly dependent on plant structure and on how this material will react when subjected to acoustic cavitation. Ultrasound seems to impact the leaves by two mechanisms: cuticle erosion, and fragmentation of olive leaf surface protrusions (hairs), which are both polyphenol-rich structures.

The water-based extraction of bioactive components from flavonoid-rich medicinal plants is a key step that should be better investigated. This is especially true when dealing with easy-to-use home-made conditions of extractions, which are known to be a bottleneck in the course for a better control and optimization of the daily uptake of active components from medicinal plants. In this work, the water-based extraction of Blackcurrant (Ribes nigrum) leaves (BC) and Chrysanthellum americanum (CA), known to have complementary pharmacological properties, was studied and compared with a previous work performed on the extraction of Hawthorn (Crataegus, HAW). Various extraction modes in water (infusion, percolation, maceration, ultrasounds, microwaves) were compared for the extraction of bioactive principles contained in BC and CA in terms of extraction yield, of amount of flavonoids, phenolic compounds, and proanthocyanidin oligomers, and of UHPLC profiles of the extracted compounds. The qualitative and quantitative aspects of the extraction, in addition to the kinetic of extraction, were studied. The optimized easy-to-use-at-home extraction protocol developed for HAW was found very efficient to easily extract bioactive components from BC and CA plants. UHPLC-ESI-MS and high-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) were also implemented to get more qualitative information on the specific and common chemical compositions of the three plants (including HAW). Their antihyaluronidase, antioxidant, and antihypertensive activities were also determined and compared, demonstrating similar activities as the reference compound for some of these plants.

The objective of this study was to evaluate the potential of green solvents for extractions of bioactive compounds (BACs) and essential oils from wild thyme (Thymus serpyllum L.) using theoretical and experimental procedures. Theoretical prediction was assessed by Hansen solubility parameters (HSPs) and conductor-like screening model for realistic solvents (COSMO-RS), to predict the most suitable solvents for extraction of BACs. An experimental procedure was performed by nonthermal technology high voltage electrical discharge (HVED) and it was compared with modified conventional extraction (CE). Obtained extracts were analyzed for chemical and physical changes during the treatment. Theoretical results for solution of BACs in ethanol and water, as green solvents, were confirmed by experimental results, while more accurate data was given by COSMO-RS assessment than HSPs. Results confirmed high potential of HVED for extraction of BACs and volatile compounds from wild thyme, in average, 2.03 times higher yield of extraction in terms of total phenolic content was found compared to CE. The main phenolic compound found in wild thyme extracts was rosmarinic acid, while the predominant volatile compound was carvacrol. Obtained extracts are considered safe and high-quality source reach in BACs that could be further used in functional food production.

Rosemary (Rosmarinus officinalis L.) is a Mediterranean medicinal and aromatic plant widely used due to valuable bioactive compounds (BACs) and aromas. The aim of the study was to evaluate the extraction of intracellular compounds from rosemary combining experimental procedure by means of high voltage electrical discharge (HVED), with a theoretical approach using two computational simulation methods: conductor-like screening model for real solvents and Hansen solubility parameters. The optimal HVED parameters were as follows: frequency 100 Hz, pulse width 400 ns, gap between electrodes 15 mm, liquid to solid ratio 50 mL/g, voltage 15 and 20 kV for argon, and 20 and 25 kV for nitrogen gas. Green solvents were used, water and ethanol (25% and 50%). The comparison was done with modified conventional extraction (CE) extracted by magnetic stirring and physicochemical analyses of obtained extracts were done. Results showed that HVED extracts in average 2.13-times higher total phenol content compared to CE. Furthermore, nitrogen, longer treatment time and higher voltage enhanced higher yields in HVED extraction. HVED was confirmed to have a high potential for extraction of BACs from rosemary. The computational stimulation methods were confirmed by experimental study, ethanol had higher potential of solubility of BACs and aromas from rosemary compared to water.

This review presents a complete picture of current knowledge on 2-methyloxolane (2-MeOx), a bio-based solvent for the extraction of natural products and food ingredients. It provides the necessary background about the properties of 2-MeOx, not only its solvent power and extraction efficiency, but its detailed toxicological profile and environmental impacts are discussed. We compared 2-MeOx with hexane which is the most used petroleum-based solvent for extraction of lipophilic natural products. The final part focuses on successful industrial transfer, including technologic, economic, and safety impacts. The replacement of petroleum-based solvents is a hot research topic, which affects several fields of modern plant-based chemistry. All the reported applications have shown that 2-MeOx is an environmentally and economically viable alternative to conventional petroleum-based solvents for extraction of lipophilic foodstuff and natural products.

Nowadays, “green analytical chemistry” challenges are to develop techniques which reduce the environmental impact not only in term of analysis but also in the sample preparation step. Within this objective, pressurized liquid extraction (PLE) was investigated to determine the initial composition of key antioxidants contained in rosemary leaves: Rosmarinic acid (RA), carnosic acid (CA), and carnosol (CO). An experimental design was applied to identify an optimized PLE set of extraction parameters: A temperature of 183 °C, a pressure of 130 bar, and an extraction duration of 3 min enabled recovering rosemary antioxidants. PLE was further compared to conventional Soxhlet extraction (CSE) in term of global processing time, energy used, solvent recovery, raw material used, accuracy, reproducibility, and robustness to extract quantitatively RA, CA, and CO from rosemary leaves. A statistical comparison of the two extraction procedure (PLE and CSE) was achieved and showed no significant difference between the two procedures in terms of RA, CA, and CO extraction. To complete the study showing that the use of PLE is an advantageous alternative to CSE, the eco-footprint of the PLE process was evaluated. Results demonstrate that it is a rapid, clean, and environmentally friendly extraction technique.

Almond skin is an important by-product in the almond processing industry, rich in potentially health-promoting phenolic compounds. The objective of this present study is to separate the skin from the almond and extract its polyphenol contents using Ultrasound-Assisted Extraction (UAE) at room temperature. Optimization was performed according to a two-variable central composite design (CCD), and the optimum combination of ultrasonic intensity and extraction temperature was obtained through multi-response optimization: ultrasonic intensity (UI), 9.47 W.cm−2; and temperature, 20 °C for an extraction time of 20 min. Under the above-mentioned conditions, total phenolic content was 258% higher with UAE than silent experiment. Mathematic modelling and microscopic investigations were achieved to enable understanding physical and structural effects of ultrasound on almond skins and comprehension of the mechanism behind the enhancement of mass transfer phenomena. Scanning Electron Microscopy (SEM) showed different acoustic cavitation impacts including fragmentation, sonoporation, and erosion. Extracts were analyzed by ultra-performance liquid chromatography coupled with mass spectrometry (UPLC-MS), identifying a combination of flavanols, flavanones and non-flavonoids. UAE shows no negative effect on almond proteins and lipids when compared to natural almonds (NS).

On behalf of my Section Editor-in-Chief co-author colleagues I am pleased to announce a Special Issue to commemorate the recent publication of Molecules’ 20,000th paper [...]

Six essential oils (EOs) from the Alliaceae family, namely garlic (Allium sativum), onion (Allium cepa), leek (Allium porrum), Chinese chive (Allium tuberosum), shallot (Allium ascalonicum) and chive (Allium schoenoprasum) were characterized by GC and GC-MS and evaluated for their functional food properties. Antibacterial properties were tested on five food-borne pathogens: Two Gram-positive Staphylococcus aureus (ATCC 25923), Listeria monocytogenes (ATCC 19115) and three Gram-negative Salmonella Typhimurium (ATCC 14028), Escherichia coli (ATCC 8739) and Campylobacter jejuni (ATCC 33291) bacteria. Antioxidant and radical-scavenging properties were tested by means of Folin-Ciocalteu and 2,2-diphenyl-1-picrylhydrazyl (DPPH) assays. Garlic, Chinese chive and onion EOs had the highest antibacterial activity whereas shallot and leek EOs were the strongest antioxidants. Heating caused a decrease in the antioxidant activity of these Eos, as shown in the Total Polar Materials (TPM) test. Suggestions on relationships between chemical composition and biological activities are presented. Results show that the EOs could be of value in the food industry as alternatives to synthetic antioxidants.

The main objective of this research was to compare physicochemical parameters, antioxidant activity, lipid composition, and sensory analysis of initial and roasted carob pod powder (Ceratonia siliqua L.) obtained at different roasting temperatures. The roasted products became darker and the average moisture content, water activity, oil content, and sweetness values decreased at higher temperatures. Total polyphenol content and antioxidant activity increased with increasing roasted temperature. Oleic acid, linoleic acid, and palmitic acid were the main fatty acids present in carob oil. Results showed that the roasted carob pod powders are sweeter, have more caramel-like taste, and have more cacao-like aroma at lower roasting temperatures but have more astringent taste, coffee-like aroma, and roasted aroma at higher roasting temperatures.

In recent years, almost all extraction processes in the perfume, cosmetic, pharmaceutical, food ingredients, nutraceuticals, biofuel and fine chemical industries rely massively on solvents, the majority of which have petroleum origins. The intricate processing steps involved in the industrial extraction cycle makes it increasingly difficult to predict the overall environmental impact; despite the tremendous energy consumption and the substantial usage of solvents, often the yields are indicated in decimals. The ideal alternative solvents suitable for green extraction should have high solvency, high flash points with low toxicity and low environmental impacts, be easily biodegradable, obtained from renewable (non-petrochemical) resources at a reasonable price and should be easy to recycle without any deleterious effect to the environment. Finding the perfect solvent that meets all the aforementioned requirements is a challenging task, thus the decision for the optimum solvent will always be a compromise depending on the process, the plant and the target molecules. The objective of this comprehensive review is to furnish a vivid picture of current knowledge on alternative, green solvents used in laboratories and industries alike for the extraction of natural products focusing on original methods, innovation, protocols, and development of safe products.

In the effort of innovation towards green analytical chemistry concepts and considering the six principles of green extraction, the industrial turbodistillation process was downscaled into a laboratory apparatus turbo-Clevenger (TC) for the extraction of essential oils. Turbodistillation is used as an industrial purpose for the extraction of essential oils from hard matrixes such as wood, barks, seeds. In this work, a TC and the conventional technique of hydrodistillation (HD, Clevenger apparatus) are used for the extraction of essential oils from three spices with hard structures (Illicium verum, Schinus terebinthifolius, and Cinnamomum cassia) and are compared. This study shows that the essential oils extracted by TC in 30 min were quantitatively (yield and kinetics profile) and qualitatively (aromatic profile) similar to those obtained using conventional hydrodistillation in 3 h. This process, which gave a reduced extraction time, was perfectly adapted to the extraction of hard matrixes.

This study aims at investigating p-menthane, a novel bio-based solvent resulting from the hydrogenation of d-limonene, as a green alternative to n-hexane or toluene for the extraction and solubilization of natural substances. First, conductor-like combination of quantum chemistry (COSMO) coupled with statistical thermodynamics (RS) calculations show a comparable solubilization profile of p-menthane and n-hexane for carotene, volatile monoterpenes such as carvone and limonene, and model triglycerides. Other data obtained experimentally in solid/liquid extraction conditions further indicate that p-menthane showed similar performances to n-hexane for extracting carotenes from carrots, aromas from caraway seeds, and oils from rapeseeds, as these products showed a comparable composition. p-Menthane was also tested using common analytical extraction procedures such as Soxhlet for determination of oil content via multiple extraction stages, and Dean−Stark for determination of water content via azeotropic distillation. For both systems, yields were comparable, but for Dean−Stark, the distillation curve slope was higher when using p-menthane, and the time needed to attain 100% water recovery was 55% shorter than for toluene. Taken together, these results reveal the potential of p-menthane as a green replacer for petroleum-based solvents such as n-hexane or toluene.

The zero-waste biorefinery concept inspired a green oleo-extraction of both natural volatile (e.g., borneol, camphor, o-cymene, eucalyptol, limonene, α-pinene, and terpinen-4-ol) and non-volatile (e.g., carnosol, carnosic, and rosmarinic acid) bioactive compounds from rosemary leaves with vegetable oils and their amphiphilic derivatives as simple food-grade solvents. It is noteworthy that soybean oil could obtain the highest total phenolic compounds (TPCs) among 12 refined oils including grapeseed, rapeseed, peanut, sunflower, olive, avocado, almond, apricot, corn, wheat germ, and hazelnut oils. Furthermore, the addition of oil derivatives to soybean oils, such as glyceryl monooleate (GMO), glyceryl monostearate (GMS), diglycerides, and soy lecithin in particular, could not only significantly enhance the oleo-extraction of non-volatile antioxidants by 66.7% approximately, but also help to remarkably improve the solvation of volatile aroma compounds (VACs) by 16% in refined soybean oils. These experimental results were in good consistency with their relative solubilities predicted by the more sophisticated COSMO-RS (COnductor like Screening MOdel for Real Solvents) simulation. This simple procedure of using vegetable oils and their derivatives as bio-based solvents for simultaneously improving the extraction yield of natural antioxidants and flavors from rosemary showed its great potential in up-scaling with the integration of green techniques (ultrasound, microwave, etc.) for zero-waste biorefinery from biomass waste to high value-added extracts in future functional food and cosmetic applications.

Herein is described a green and original alternative procedure for the extraction of oil from microalgae. Extractions were carried out using terpenes obtained from renewable feedstocks as alternative solvents instead of hazardous petroleum solvents such as n-hexane. The described method is achieved in two steps using Soxhlet extraction followed by the elimination of the solvent from the medium using Clevenger distillation in the second step. Oils extracted from microalgae were compared in terms of qualitative and quantitative determination. No significant difference was obtained between each extract, allowing us to conclude that the proposed method is green, clean and efficient.

The purpose of the study was to investigate microwave selective heatingphenomena and their impact on heterogeneous chemical reactions. We also present a toolwhich will help microwave chemists to answer to such questions as “My reaction yields90% after 7 days at reflux; is it possible to obtain the same yield after a few minutes undermicrowaves?†and to have an approximation of their reactions when conducted undermicrowaves with different heterogeneous procedures. This model predicting reactionkinetics and yields under microwave heating is based on the Arrhenius equation, inagreement with experimental data and procedures.

Since solvents of petroleum origin are now strictly regulated worldwide, there is a growing demand for using greener, bio-based and renewable solvents for extraction, purification and formulation of natural and food products. The ideal alternative solvents are non-volatile organic compounds (VOCs) that have high dissolving power and flash point, together with low toxicity and less environmental impact. They should be obtained from renewable resources at a reasonable price and be easy to recycle. Based on the principles of Green Chemistry and Green Engineering, vegetable oils could become an ideal alternative solvent to extract compounds for purification, enrichment, or even pollution remediation. This review presents an overview of vegetable oils as solvents enriched with various bioactive compounds from natural resources, as well as the relationship between dissolving power of non-polar and polar bioactive components with the function of fatty acids and/or lipid classes in vegetable oils, and other minor components. A focus on simulation of solvent-solute interactions and a discussion of polar paradox theory propose a mechanism explaining the phenomena of dissolving polar and non-polar bioactive components in vegetable oils as green solvents with variable polarity.

Response surface methodology (RSM) and artificial neural networks (ANN) were evaluated and compared in order to decide which method was the most appropriate to predict and optimize total phenolic content (TPC) and oleuropein yields in olive tree leaf (Olea europaea) extracts, obtained after solvent-free microwave-assisted extraction (SFMAE). The SFMAE processing conditions were: microwave irradiation power 250–350 W, extraction time 2–3 min, and the amount of sample 5–10 g. Furthermore, the antioxidant and antimicrobial activities of the olive leaf extracts, obtained under optimal extraction conditions, were assessed by several in vitro assays. ANN had better prediction performance for TPC and oleuropein yields compared to RSM. The optimum extraction conditions to recover both TPC and oleuropein were: irradiation power 250 W, extraction time 2 min, and amount of sample 5 g, independent of the method used for prediction. Under these conditions, the maximal yield of oleuropein (0.060 ± 0.012 ppm) was obtained and the amount of TPC was 2.480 ± 0.060 ppm. Moreover, olive leaf extracts obtained under optimum SFMAE conditions showed antibacterial activity against S. aureus and S. epidermidis, with a minimum inhibitory concentration (MIC) value of 1.25 mg/mL.

In this study, extraction of soluble proteins from rapeseed cake using different conventional and innovative extraction processes in order to maximize the extraction yield has been investigated. Firstly, various extraction techniques including ultrasound, microwave, and percolation were tested to increase the protein recovery efficiency. Secondly, response surface methodology (RSM) using a central composite design (CCD) approach was applied to investigate the influence of process variables on ultrasound-assisted extraction (UAE). Statistical analysis revealed that the optimized conditions providing a protein yield of 4.24 g/100 g DM were an ultrasound power of 5.6 W·cm−2 and temperature of 45 °C. Quantitatively UAE followed by two stages of conventional extraction gave the best total protein yield of 9.81 g/100 g DM. Qualitatively, the protein efficiency ratio (PER) used as measure of the nutritive value (12S/2S ratio) which indicates protein quality in terms of S-containing essential amino acids, was similar to that of the conventional extraction method. Small amounts of protein aggregate were observed in the HPLC profile of the extract.

Lipid-based oleaginous microorganisms are potential candidates and resources for the sustainable production of biofuels. This study was designed to evaluate the performance of several alternative bio-based solvents for extracting lipids from yeasts. We used experimental design and simulation with Hansen solubility simulations and the conductor-like screening model for realistic solvation (COSMO-RS) to simulate the solubilization of lipids in each of these solvents. Lipid extracts were analyzed by high performance thin-layer chromatography (HPTLC) to obtain the distribution of lipids classes and gas chromatography coupled with a flame ionization detector (GC/FID) to obtain fatty acid profiles. Our aim was to correlate simulation with experimentation for extraction and solvation of lipids with bio-based solvents in order to make a preliminary evaluation for the replacement of hexane to extract lipids from microorganisms. Differences between theory and practice were noted for several solvents, such as CPME, MeTHF and ethyl acetate, which appeared to be good candidates to replace hexane.

Solvent-free microwave extraction (SFME) and conventional hydro-distillation (HD) were used for the extraction of essential oils (EOs) from Egyptian sweet basil (Ocimum basilicum L.) leaves. The two resulting EOs were compared with regards to their chemical composition, antioxidant, and antimicrobial activities. The EO analyzed by GC and GC-MS, presented 65 compounds constituting 99.3% and 99.0% of the total oils obtained by SFME and HD, respectively. The main components of both oils were linalool (43.5% SFME; 48.4% HD), followed by methyl chavicol (13.3% SFME; 14.3% HD) and 1,8-cineole (6.8% SFME; 7.3% HD). Their antioxidant activity were studied with the 2,2-diphenyl-1-picrylhydrazyl (DPPH•) radical scavenging method. The heating conditions effect was evaluated by the determination of the Total Polar Materials (TPM) content. The antimicrobial activity was investigated against five microorganisms: two Gram-positive bacteria, Staphylococcus aureus and Bacillus subtilis, two Gram-negative bacteria, Escherichia coli and Pseudomonas aeruginosa, and one yeast, Candida albicans. Both EOs showed high antimicrobial, but weak antioxidant, activities. The results indicated that the SFME method may be a better alternative for the extraction of EO from O. basilicum since it could be considered as providing a richer source of natural antioxidants, as well as strong antimicrobial agents for food preservation.