Search

Anisotropic and super-strong conductive hydrogels were prepared by mechanical stretching combined with the Hofmeister effect. Anisotropic hydrogels exhibit anisotropic mechanical and electrochemical properties.

l-methionine sulfoxide (Met(O)–OH) as a CPA for cell cryopreservation.

Although hydrogel-based patches have shown promising therapeutic efficacy in myocardial infarction (MI), synergistic mechanical, electrical, and biological cues are required to restore cardiac electrical conduction and diastolic-systolic function. Here, an injectable mechanical-electrical coupling hydrogel patch (MEHP) is developed via dynamic covalent/noncovalent cross-linking, appropriate for cell encapsulation and minimally invasive implantation into the pericardial cavity. Pericardial fixation and hydrogel self-adhesiveness properties enable the MEHP to highly compliant interfacial coupling with cyclically deformed myocardium. The self-adaptive MEHP inhibits ventricular dilation while assisting cardiac pulsatile function. The MEHP with the electrical conductivity and sensitivity to match myocardial tissue improves electrical connectivity between healthy and infarcted areas and increases electrical conduction velocity and synchronization. Overall, the MEHP combined with cell therapy effectively prevents ventricular fibrosis and remodeling, promotes neovascularization, and restores electrical propagation and synchronized pulsation, facilitating the clinical translation of cardiac tissue engineering.

Stem cell therapy integrated with hydrogels has shown promising potential in wound healing. However, the existing hydrogels usually cannot reach the desired therapeutic efficacy for burn wounds due to the inadaptability to wound shape and weak anti-infection ability. Moreover, it is difficult to improve the environment for the survival and function of stem cells under complicated wound microenvironments. In this study, an injectable and self-healing hydrogel (DSC), comprising sulfobetaine-derived dextran and carboxymethyl chitosan, is fabricated through a Schiff-base reaction. Meanwhile, the DSC hydrogel shows high nonfouling properties, including resistance to bacteria and nonspecific proteins; moreover, the prepared hydrogel can provide a biomimetic microenvironment for cell proliferation whilst maintaining the stemness of adipose-derived stem cells (ADSCs) regardless of complex microenvironments. In burnt murine animal models, the ADSCs-laden hydrogel can significantly accelerate wound healing rate and scarless skin tissue regeneration through multiple pathways. Specifically, the ADSCs-laden DSC hydrogel can avoid immune system recognition and activation and thus reduce the inflammatory response. Moreover, the ADSCs-laden DSC hydrogel can promote collagen deposition, angiogenesis, and enhance macrophage M2 polarization in the wound area. In summary, sulfobetaine-derived polysaccharide hydrogel can serve as a versatile platform for stem cell delivery to promote burn wound healing.

Ice recrystallization inhibitors inspired from antifreeze proteins (AFPs) are receiving increasing interest for cryobiology and other extreme environment applications. Here, we present a modular strategy to develop polysaccharide-derived biomimetics, and detailed studies were performed in the case of dextran. Poly(vinyl alcohol) (PVA) which has been termed as one of the most potent biomimetics of AFPs was grafted onto dextran via thiol-ene click chemistry (Dex

Underwater adhesion plays an essential role in soft electronics for the underwater interface. Although hydrogel-based electronics are of great interest, because of their versatility, water molecules prevent hydrogels from adhering to substrates, thus bottlenecking further applications. Herein, inspired by the barnacle proteins, MXene/PHMP hydrogels with strong repeatable underwater adhesion are developed through the random copolymerization of 2-phenoxyethyl acrylate, 2-methoxyethyl acrylate, and

Hydrogel-based flexible electronics, especially stretchable human motion sensors, have been intensely investigated in the past few decades. However, challenges remain in the preparation of anti-freezing hydrogels with balanced properties of high sensitivity, large sensing range and suitable mechanical properties in a broad temperature range. In this study, we fabricate a fully-physically crosslinked poly(hydroxyethyl acrylamide)/silk fibroin-LiCl (PHEAA/SF-LiCl) hydrogel with excellent mechanical properties at both room temperature and subzero temperature. Strain sensitivity and durability at both room temperature (25 °C) and low temperature (−30 °C) have been characterized. Strain sensors which can monitor human movements in different situations, including wireless sensing and low temperature sensing have been fabricated, indicating their huge potential in flexible electronics, remote health control and electronic skins.

Traditional adhesives such as cyanoacrylate glue are mostly solvent-based. They are facing the problem of insufficient adhesion to some substrates, and also from the drawback of volatilization and release of small organic molecules in the process of usage. Therefore, a novel adhesive with non-irritating, high adhesive strength, and antibacterial properties is highly required. In this study, a full physically crosslinked zwitterionic poly(betaine sulfonate methacrylate) (PSBMA) hydrogel is proposed. The physical crosslinking interactions endow the hydrogel with good self-healing properties. Furthermore, the pure physical crosslinking hydrogel can form PSBMA powder adhesive after lyophilization and return to the hydrogel state after hydration. The mechanical properties of PSBMA adhesive can be modulated via adjusting the solid content and initiator dosage. Following the cure process similar to that of snail mucus or insect exoskeletons in nature, the adhesion of the PSBMA adhesive is improved at least 100 times than its wet state. In addition, the PSBMA adhesive is easy to be removed due to the dissociation of cross-linked structures in saltwater environments. Moreover, PSBMA adhesive with antifouling properties can effectively prevent the adhesion of proteins and bacteria, which shows potential applications in the assembly of medical devices.

Postoperative peritoneal adhesion is a common complication after surgery with high morbidity. In addition to improving surgical operations, medical therapy and physical barriers are the two main ways to prevent postoperative peritoneal adhesion. Satisfactory efficacy is not often obtained by the single antiadhesion method, and the combination of barrier therapy and antiadhesion drugs has attracted more attention. In this study, we first demonstrated that aberrant complement activation was associated with peritoneal injury and inflammatory responses. Correspondingly, blocking the C5a-C5aR axis reaction effectively reduced inflammatory reactions. Therefore, we creatively developed an integrated treatment of xyloglucan derivative (mXG) hydrogel and intravenous anti-C5a receptor antibody (anti-C5aRab) aimed at peritoneal adhesion, and then systematically evaluated the therapeutic efficacy using a sidewall defect-cecum abrasion model in mice. In vitro and in vivo experiments showed that the mXG hydrogel had good biocompatibility and degradability and could serve as a safe anti-adhesion barrier. The results showed that anti-C5aRab treatment could significantly inhibit peritoneal adhesions by reducing neutrophil infiltration and the expression of phosphorylated Smad2. Taken together, the mXG hydrogel integrated with anti-C5aRab showed superior antiadhesion performance and holds promising clinical applications in preventing peritoneal adhesion. STATEMENT OF SIGNIFICANCE: Postoperative peritoneal adhesion is an urgent problem to be solved after surgery. Previously, a biodegradable and thermoreversible xyloglucan derivative (mXG) hydrogel was developed that effectively prevented postoperative peritoneal adhesions, but obvious inflammatory responses and proliferation could still be observed. In addition, aberrant complement activation is associated with a variety of inflammatory diseases. We demonstrated that aberrant complement activation is involved in peritoneal adhesion. In this work, mXG hydrogel and intravenous anti-C5a receptor antibody (anti-C5aRab) were integrated to address peritoneal adhesions. The anti-C5aRab reduced the inflammatory responses. In addition, the mXG hydrogel was easy to use and effectively isolated the wound surface at the local injury site. Overall, this integrated treatment significantly improved the antiadhesion effect.

Hydrogel-based strain sensors have been widely investigated owing to their intrinsic flexible and extensible properties. However, integrating good mechanical properties and excellent strain sensitivity into one hydrogel remains a challenge. In this work, a dual physical cross-linked carboxymethyl cellulose-Fe3+/polyacrylamide (CMC-Fe3+/PAAm) double network hydrogel was developed by facile two-step method. In this hydrogel, the Fe3+ cross-linked CMC acts as the first network for dissipating energy and hydrophobic association PAAm acts as the second network to maintain the integrity of hydrogel. Owing to these physical interactions, the as-prepared hydrogel shows good mechanical properties (e.g., tensile strength, 1.82 MPa; toughness, 6.52 MJ/m3). Furthermore, these mechanical behaviors can be modulated by adjusting the solid content, CMC/PAAm ratio, Fe3+ concentration and soaking time in Fe3+ solution. Moreover, the obtained hydrogel shows excellent self-recovery and anti-fatigue property due to the reversibility of dual physical cross-linked interactions. Additionally, the CMC-Fe3+/PAAm hydrogel shows good conductivity (1.82 S/m), strain sensitivity (gauge factor = 4.02 at 50–600% strain), and fast response time (260 ms). Based on the high strain sensitivity, the CMC-Fe3+/PAAm hydrogel can fabricate a flexible strain sensor for precisely monitoring various human motions. This study suggests that the CMC-Fe3+/PAAm hydrogel exhibits potential application in the flexible and stretchable strain sensors.

Intra-peritoneal adhesion are common and serious complications after surgery. Deposition of proteins and inflammatory response on injured cecum are main factors resulting in the formation of adhesi...

Natural rubber (NR) grafted with 2-ethylhexyl acrylate (2-EHA) and methacrylic acid (MAA, collectively NR-g-PEHA/MAA) was synthesized by emulsion polymerization. Tetraethylenepentamine and cumene hydroperoxide were used as redox initiators. The successful grafting of 2-EHA and MAA onto NR was confirmed by Fourier transform infrared spectroscopy. The morphology of the NR latex particles was observed by transmission electron microscopy. The effects of reaction temperature, initiator dosage, feeding mode, and hard monomer content on the mechanical properties of the modified NR film were investigated. Grafted polymer chains were unevenly wrapped on the outside of NR particles, and smaller particles were more easily grafted. Crosslinking was characterized using a toluene swelling method. Thermal stability and glass transition temperature were examined by differential scanning calorimetry and thermogravimetric analysis. The results showed that the thermal stability of NR-g-PEHA/MAA had been improved, and the glass transition temperature (Tg) was unchanged.

Circulation stability in vivo and stimuli-responsiveness under a tumor microenvironment of the polymeric prodrug micellar drug delivery systems are very critical to improve the tumor therapeutic efficiency. In this study, a series of polyamidoamine (PAMAM)-graft-poly(2-(diethylamino) ethyl methacrylate) (PDEAEMA)-block-poly(betaine sulfonate) (PSBMA) (PDS) unimolecular micelles were prepared via atom transfer radical polymerization. PAMAM served as a hydrophobic core to load the drug, the PDMAEMA segment was a middle layer to provide both thermo- and pH-sensitivity, whereas the PSMBA shell layer was used to improve the stability of the unimolecular micelles. The PDS exhibited a spherical structure with the size of 10-20 nm at pH 7.4. PDS micelles had excellent stability to resist the large volume liquid dilution. Moreover, it exhibited excellent stability in a complex biological microenvironment because of a superhigh antiprotein adhesion capacity of the PSBMA shell layer compared with PAMAM micelles. Drug release studies confirmed that the DOX can remain in the PDS micelles at pH 7.4 and 37 °C, whereas it can rapidly be released when the pH decreases to 5.0 and/or the temperature increases to 40 °C. In vitro studies suggested that the PDS drug delivery system can effectivity induce apoptosis and inhibit the proliferation of cancer cells. In vivo studies suggested that the PDS micelles prolonged the circulation time, decreased the side effects, and increased the antitumor efficacy. Therefore, the prepared PDS micelles are a potential anticancer drug delivery carrier for cancer therapy.

The efficient removal of toxic metal ions from waste water is of critical importance in environmental protection. In this study, we report the incorporation of graphene oxide (GO) into bacterial cellulose (BC) and the effect on the removal of metal ions from waste water. The as-prepared BC/GO adsorbents have a three-dimensional (3D) network structure with interconnected pores and high porosity. The adsorption capacities and efficiencies of the BC/GO adsorbents with varying GO contents were compared by using Cu2+, Cd2+, and Pb2+ as model heavy metal ions. The incorporated GO into the BC/GO adsorbents plays a critical role in removing metal ions through strong electrostatic interactions between the positive metal ions and the negative functional groups on GO. In addition, the effects of pH, contact time, adsorbent dose, and ion concentration on the adsorption behavior of the BC/GO adsorbents were investigated. The data from adsorption kinetics indicate that the adsorption of Cu2+, Cd2+, and Pb2+ on BC/GO obeys a pseudo-second-order model, while the adsorption isotherms vary with the type of metal ions. The desorption and readsorption experiments of the BC/GO adsorbents demonstrate good recyclability. It has been demonstrated that incorporating GO into BC is an effective way to improve the adsorption behavior of BC.

Recently, flexible and wearable electronics have gained considerable research interest due to their potential applications in wearable devices, energy storage materials, electronic skins, sensors, etc. Compared to elastomers, hydrogels demonstrate more potential for flexible electronics because of their biomimetic structures, suitable mechanical properties and excellent biocompatibility. Among all the designs, nanocomposite hydrogel-based strain and pressure sensors which can transmit external stimulus to electrical signals have been intensely investigated due to their high mechanical strength, considerable conductivity and outstanding sensitivity. Numerous reports have been dedicated to the designs, preparations and applications of nanocomposite hydrogels. This review provides an up-to-date and comprehensive summary of research progresses of nanocomposite hydrogel-based strain and pressure sensors including designing strategies, preparing methods and applications of the five nanofiller based hydrogel sensors including carbon nanotube based, graphene oxide based, MXene based, polymer nanofiller based and other nanofiller based sensors. Representative cases are carefully selected and discussed regarding the fabrication, merits and demerits, respectively. Finally, perspectives and challenges are presented for the designs of future nanocomposite hydrogel-based strain and pressure sensors.

Flexible and stretchable electronics have received tremendous attention for next-generation human-friendly electronic applications. However, fabrication of transparent, fully recyclable and stretchable electronic sensors with low-temperature stability using biocompatible natural polymer-based hydrogels still remains a great challenge. In this study, a green and fully recyclable stretchable electronic sensor with high transparency and ultra-low operating temperature is constructed using ionic conductive gelatin organohydrogels. These gelatin organohydrogels are prepared by a simple strategy of immersing gelatin pre-hydrogels in citrate (Na3Cit) water/glycerol solutions. The existence of Na3Cit in the organohydrogel not only induces the formation of multiple non-covalent cross-linking points, endowing the organohydrogel with high mechanical performances, but also makes the organohydrogel have excellent ionic conductivity. The organohydrogel is also highly transparent and exhibits outstanding antifreezing properties. The mechanical robustness, conductivity and transparency of the organohydrogel can be well maintained even at −60 °C. As a result, a stretchable and transparent electronic sensor based on this organohydrogel is fabricated, which is strain-sensitive with a large linear sensing window and excellent stability. More importantly, the organohydrogel-based electronic sensor can be fully recycled due to the reversible non-covalently crosslinked structure, and the recycled organohydrogel regains its mechanical and sensing properties. The obtained sensors could precisely detect various human activities even below −30 °C, indicating the potential applications of the organohydrogel-based electronic sensor in flexible and stretchable electronics in a broad range of temperature.

The development of three-dimensional conductive scaffolds is vital to support the adhesion, proliferation and myocardial differentiation of stem cells in cardiac tissue engineering. Herein, we describe a facile approach for preparing a poly(3,4-ethylenedioxythiophene)/alginate (PEDOT/Alg) porous scaffold with a wide range of desirable properties. In the PEDOT/Alg scaffold, chemically crosslinked alginate networks are formed using adipic acid hydrazide as the crosslinker, and PEDOT is synthesized in situ in the alginate matrix simultaneously. PEDOT exists in the alginate matrix as particles and its morphology can be modulated by adjusting the ratio of PEDOT/alginate. The results also show that the swelling properties, degradation behaviors, mechanical strength and conductivity of the PEDOT/Alg scaffold can be controlled via adjusting the PEDOT/alginate ratio. The introduction of PEDOT can overcome the brittle nature of the pure alginate scaffold. Moreover, the PEDOT/Alg scaffold exhibits excellent conductivity (as high as 6 × 10−2 S cm−1). The introduction of PEDOT improves the protein absorption capacity of the alginate scaffold. To explore its potential application in cardiac tissue engineering, brown adipose-derived stem cells (BADSCs) are seeded in the prepared PEDOT/Alg porous scaffold. The results suggest that the PEDOT/Alg porous scaffold can support the attachment and proliferation of BADSCs. Moreover, it is beneficial for the cardiomyogenic differentiation of BADSCs, especially under electrical stimulation. Overall, we conclude that the PEDOT/Alg porous scaffold may represent an ideal platform to modulate the biological behaviors of BADSCs.

Graphene aerogels (GAs) were synthesized via a one-step hydrothermal method. Generally, the pore shape and diameter of GAs are difficult to control or the preparation process is complicated, requiring a multi-step operation. Herein, a soft-template one-step hydrothermal synthesis process was proposed to produce GAs with controllable pore sizes. Cyclohexane and n-butanol were added to a graphene oxide suspension to form a uniform aqueous dispersion under emulsification by sodium lauryl sulfate. The reduction process may have occurred around the organic droplets during the hydrothermal reaction, and a large number of organic droplets became countless physical barriers inside the hydrogel. In the later freeze-drying and high-temperature calcination procedures, the droplets evaporated to form a rich pore structure. Compared to the conventional templating method, the organic template was volatilized during the drying process such that no additional process for removing the template was required. In addition, GAs prepared by the template method possessed lower density (2.66 mg cm−3) and better compression performance and, as an adsorbent material, absorbed organic matter and petroleum from wastewater more efficiently than GAs obtained by the traditional one-step hydrothermal method; Q for n-hexane reached 116, and Q for xylene reached 147; also, the GAs prepared by the soft template method can absorb all crude oil in water samples within 30 s.

Zwitterionic polymers have shown promising results in non-fouling and preventing thrombosis. However, the lack of controlled surface coverage hinders their application for biomedical devices. Inspired by the natural biological surfaces, a facile zwitterionic microgel-based coating strategy is developed by the co-deposition of poly (sulfobetaine methacrylate-co-2-aminoethyl methacrylate) microgel (SAM), polydopamine (PDA), and sulfobetaine-modified polyethyleneimine (PES). The SAMs were used to construct controllable morphology by using the PDA combined with PES (PDAS) as the intermediate layer, which can be easily modulated via adjusting the crosslinking degree and contents of SAMs. The obtained SAM/PDAS coatings exhibit high anti-protein adhesive properties and can effectively inhibit the adhesion of cells, bacteria, and platelet through the synergy of high deposition density and controllable morphology. In addition, the stability of SAM/PDAS coating is improved owing to the anchoring effects of PDAS to substrate and SAMs. Importantly, the ex vivo blood circulation test in rabbits suggests that the SAM/PDAS coating can effectively decrease thrombosis without anticoagulants. This study provides a versatile coating method to address the integration of zwitterionic microgel-based coatings with high deposition density and controllable morphology onto various substrates for wide biomedical device applications. STATEMENT OF SIGNIFICANCE: Thrombosis is a major cause of medical device implantation failure, which results in significant morbidity and mortality. In this study, inspired by natural biological surfaces (fish skin and vascular endothelial layer) and the anchoring ability of mussels, we report a convenient and efficient method to firmly anchor zwitterionic microgels using an oxidative co-deposition strategy. The prepared coating has excellent antifouling and antithrombotic properties through the synergistic effect of physical morphology and chemical composition. This biomimetic surface engineering strategy is expected to provide new insights into the clinical problems of blood-contacting devices related to thrombosis.

To improve the therapeutic effect of a hydrogel on damaged tissue, a series of hydroxybutyl chitosan (HBC) and poly(sulfobetaine methacrylate) (PSBMA) composite hydrogels (HBC-PSB) with thermosensitivity, self-healing, antibiofouling, and synergistic antibacterial activity are prepared by mechanical blending. The electrostatic interaction among PSBMA and hydrophobic association among HBC are the main drive force to form a full physically crosslinked hydrogel. HBC can avoid the aggregation and precipitation of PSBMA caused by intermolecular strong association. Meanwhile, the existence of the PSBMA network can promote the sol-gel transition of HBC. Due to the reversible physical crosslinking, the HBC-PSB hydrogel shows excellent self-healing behaviors, and can be stored as dry powder. Intriguingly, the composite hydrogel has good synergistic antibacterial performance

Uniformly dispersing silver nanowires (AgNWs) in polymer matrices is of paramount importance for developing high-performance electromagnetic interference (EMI) shielding materials. Herein, new flexible and robust high-efficiency bacterial cellulose (BC)-based EMI shielding papers were developed via a modified step-by-step in situ biosynthesis method, in which, AgNWs were well distributed in the BC network. The BC nanofibers and AgNWs could form an effective entangled network with hydrogen bonding, efficiently strengthening the produced BC/AgNW papers. An electrical conductivity of 608365 S m1 was achieved for a BC/AgNW paper with a AgNW content of 36.5 wt%, which is superior to almost all AgNW-containing papers reported so far. Moreover, the BC/AgNW paper could sustain mechanical deformation and vigorous washing, without losing electrical conductivity. Additionally, this paper presents an ultrahigh specific EMI shielding effectiveness of 6400 dB mm1, which is higher than almost all previously reported AgNW-based polymer composites. The proposed approach in this study provides a facile and scalable fabrication route for producing flexible and highly conductive BC/AgNW papers, which are of great potential as electrically conductive components and EMI shielding elements in advanced applications., This work was supported by the National Natural Science Foundation of China (Grant Nos. 51973058 and 31870963), Jiangxi Provincial Natural Science Foundation (Grant No. 20202ACBL214007), Key Research and Development Program of Jiangxi Province (Grant No. 20192ACB80008) and the Key Project of Natural Science Foundation of Jiangxi Province (20202ACBL204013)., info:eu-repo/semantics/publishedVersion

Recently, the fabricating of three-dimensional (3D) macroporous bacterial cellulose (MP-BC) scaffolds with mechanically disintegrated BC fragments has attracted considerable attention. However, the successful implementation of these materials depends mainly on their mechanical stability and robustness. Here, a non-toxic crosslinker, 1-ethyl-3-(-3-dimethylaminopropyl) carbodiimide hydrochloride/N-hydroxysuccinimide (EDC/NHS), is employed to induce crosslinking reactions between BC fragments. In addition to their large pore sizes, the EDC/NHS-crosslinked MP-BC scaffolds exhibit excellent compression properties and shape recovery ability, owing to the EDC/NHS-induced crosslinking on the BC nanofibers. The results of in vitro studies reveal that the biocompatibility of MP-BC scaffolds is better than that of pristine BC scaffolds because the former provided more space for cell proliferation. The results of in vivo studies show that the neocartilage tissue with native cartilage appearance and abundant cartilage-specific extracellular matrix deposition is successfully regenerated in nude mice. The findings reveal the immense application potential of mechanically robust BC scaffolds with controllable pore sizes and shape-recoverable properties in tissue engineering.

Cell-based therapy is a promising technology for intractable diseases and health care applications, in which cryopreservation has become an essential procedure to realize the production of therapeutic cells. Ice recrystallization is the major factor that affects the post-thaw viability of cells. As a typical series of biomacromolecules with ice recrystallization inhibition (IRI) activity, antifreeze proteins (AFPs) have been employed in cell cryopreservation. Meanwhile, synthesized materials with IRI activity have emerged in the name of biomimetics of AFPs to expand their availability and practicality. However, fabrication of AFPs mimetics is in a chaotic period. There remains little commonality among different AFPs mimetics, then it is difficult to set guidelines on their design. With no doubt, a comprehensive understanding on the antifreezing mechanism of AFPs in molecular level will enable us to rebuild the function of AFPs, and provide convenience to clarify the relationship between structure and function of these early stage biomimetics. In this review, we would discuss those previously reported biomimetics to summarize their structure characteristics concerning the IRI activity and attempt to develop a roadmap for guiding the design of novel AFPs mimetics.

In this work, doxorubicin (DOX) was intercalated into layered nanohydroxyapatite (LHAp). The drug loaded LHAp (DOX@LHAp) was then mixed with poly(lactic-co-glycolic acid) (PLGA) and electrospun to yield DOX@LHAp/PLGA composite scaffolds. As control, needle-like nanohydroxyapatite (nHAp) was also used to make an DOX@nHAp/PLGA composite scaffold and bare DOX was used to fabricate DOX/PLGA scaffold. The morphology, release behavior of DOX, and capability to inhibit cancer cells were assessed. The addition of DOX-loaded nHAp to PLGA causes a slight decrease in the average fiber diameter of DOX@LHAp/PLGA as compared to PLGA. The in vitro drug release tests reveal a much faster release of DOX from DOX/PLGA than DOX@LHAp/PLGA. Moreover, DOX@LHAp/PLGA displays a more sustainable release over DOX@nHAp/PLGA due to the storage of DOX in the gallery of LHAp, which is further proved by their cancer cell inhibition results. We believe that the DOX@LHAp/PLGA scaffold has potential as an implantable drug delivery system.

In this study, a novel mesoporous bioactive glass nanotube (MBGN) scaffold has been fabricated via template-assisted sol-gel method using bacterial cellulose (BC) as template and nonionic block copolymer (P123) as pore-directing agent. The scaffold was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier-transform infrared (FTIR) spectroscopy, and N2 adsorption-desorption analysis. Furthermore, simvastatin was used to evaluate the loading efficiency and release kinetics of the scaffold. The obtained scaffold displays nanofiber-like morphology, ordered mesopores on the tube walls, and interconnected three-dimensional (3D) network structure that completely replicates the BC template. In addition, it shows dual pore sizes (16.2 and 3.3 nm), large specific surface area (537.2 m2 g−1) and pore volume (1.429 cm3 g−1). More importantly, the scaffold possesses excellent apatite-forming ability and sustainable drug release as compared to the counterpart scaffold without mesopores. This unique scaffold can be considered a promising candidate for drug delivery and bone tissue regeneration.

In this work, we report a novel strategy for improving the interfacial nature in corn fiber/polylactide (CRF/PLA) composites by directly applying a sizing containing silica nanoparticles on the surface of CRFs. This results in enhanced mechanical properties of the CRF/PLA composites. These improvements can be mainly attributed to the presence of silica nanoparticles on CRF-PLA interfaces, which act to resist the crack propagation. The increased surface roughness of CRFs from incorporated silica nanoparticles may also contribute to the enhanced mechanical properties. This simple methodology can be easily scaled up and thus shows great promise in industrial applications.

Graphene-based nanomaterials have been used as biomaterials to enhance cell adhesion, growth, and differentiation. However, the effect of graphene materials on cancer cell behavior has not been thoroughly investigated. Herein, we have incorporated graphene oxide (GO) into cellulose acetate (CA) to develop nanofibrous scaffolds for in vitro cancer cell culture, which is a crucial step for drug screening and cancer research. The Go/CA scaffolds were seeded with breast cancer cells and cell viability, proliferation, adhesion, infiltration, and morphology were assessed. Mechanical characterization demonstrated that the mechanical properties of GO/CA scaffolds were significantly better than bare CA scaffold and improved with increasing GO content. More importantly, the in vitro cell studies showed that the cancer cells on GO/CA scaffolds had significantly higher viability and better cell adhesion and growth than bare CA. Our results confirm an important role of GO in improving mechanical properties and cancer cell performance on GO/CA scaffolds. These results suggest the potential of the GO/CA scaffolds as a promising candidate for in vitro cancer models.

Hydrogels based on supramolecular noncovalent interactions have attracted great research interest but are still limited by relatively low mechanical strength and performance deterioration at subzero temperatures because of the formation of ice crystallization. In this study, an antifreezing and mechanically strong gelatin supramolecular organohydrogel is prepared via a simple strategy of immersing a gelatin pre-hydrogel in the citrate (Cit) water/glycerol mixture solution. In the organohydrogel, a part of water molecules are replaced by glycerol, which inhibits the formation of ice crystallization even at extremely low temperature. In addition, the formation of noncovalent interactions such as the hydrophobic aggregation induced by the salting-out effect, ionic interactions between the -NH3+ of gelatin and Cit3- anions, and hydrogen bonding between gelatin chains and glycerol endows the organohydrogels with high mechanical strength and toughness. The supramolecular organohydrogel can maintain its mechanical flexibility even at -80 °C or be stored for a long time. Moreover, the nature of noncovalent interactions endows the organohydrogel with intriguing thermoplasticity, good healable ability, and excellent adhesive behavior at various substrate surfaces.

The spread of cancer cells to skeletal tissues which mainly consist of hydroxyapatite (HAp) may indicate some correlation between cancer cells and HAp. It is well accepted that an effective experimental model (in vitro cancer model) which mimics the microenvironment in vivo is of great importance for cancer research. Herein, for the first time, HAp nanoparticles are incorporated into poly(lactic-co-glycolic acid) (PLGA) nanofibers to construct biomimetic 3D nanofibrous scaffolds as an in vitro cancer model. The morphologies, structure, mechanical and thermal properties of the PLGA/HAp scaffolds were characterized. The as-prepared PLGA/HAp scaffolds exhibit decreased fiber diameter, enhanced mechanical properties (31% and 8% improvement in tensile strength and modulus, respectively), and rougher surface over PLGA scaffold. The in vitro biocompatibility of PLGA/HAp scaffolds was evaluated with breast cancer cell line (MCF-7) using PLGA scaffold as control and cell cycle progression was detected by flow cytometry. MTT assay and live staining results demonstrate that PLGA/HAp scaffolds can better support cell viability and proliferation over PLGA scaffold. Analysis of cell cycle reveals that DNA synthesis, cell division, and proliferation of cancer cell are related to the presence of HAp in PLGA nanofibers. Our studies demonstrate the suitability of HAp-incorporated PLGA fibrous scaffolds as a promising platform for 3D cancer cell culture.

Herein, we develop a fluorescence sensing platform based on boron and nitrogen co-doped graphene quantum dots (B,N-GQDs), which are synthesized by a one-step bottom-up hydrothermal method. The prepared B,N-GQDs exhibit high-fluorescence quantum yield (75%) and long fluorescence lifetime (12.86 ns). In the B,N-GQDs–Hg2+ system, the fluorescence of B,N-GQDs is quenched with increasing Hg2+ concentration due to the affinity interaction between the surface functional groups of B,N-GQDs and Hg2+. Subsequently, the quenched fluorescence of the B,N-GQDs–Hg2+ system is gradually recovered with the addition of F− ions due to their strong affinity with Hg2+. The linear ranges for the detection of Hg2+ and F− ions are 0.2–2.6 μM and 0.25–7.0 mM, respectively, and the detection limits are 0.16 μM and 0.18 mM for Hg2+ and F− ions, respectively, which are below the regulatory level of 0.25 μM and 0.526 mM in the Integrated Wastewater Discharge Standard. Therefore, B,N-GQDs provide a facile and effective approach for the detection of both Hg2+ and F− ions with real-time monitoring and high-speed measuring.

The fabrication of ultrathin films that are electrically conductive and mechanically strong for electromagnetic interference (EMI) shielding applications is challenging. Herein, ultrathin, strong, and highly flexible Ti

Incorporating bioactive nanofillers and creating porous surfaces are two common strategies used to improve the tissue integration of polyetheretherketone (PEEK) material. However, few studies have reported the combined use of both strategies to modify PEEK. Herein, for the first time, dual nanoparticles of graphene oxide (GO) and hydroxyapatite (HAp) were incorporated into PEEK matrix to obtain ternary composites that were laser machined to create macropores with diameters ranging from 200 μm to 600 μm on the surfaces. The surface morphology and chemistry, mechanical properties, and cellular responses of the composites were investigated. The results show that micropatterned pores with a depth of 50 μm were created on the surfaces of the composites, which do not significantly affect the mechanical properties of the resultant composites. More importantly, the incorporation of GO and HAp significantly improves the cell adhesion and proliferation on the surface of PEEK. Compared to the smooth surface composite, the composites with macroporous surface exhibit markedly enhanced cell viability. The combined use of nanofillers and surface macropores may be a promising way of improving tissue integration of PEEK for bone implants.

High-strength zwitterionic elastomers via a “swelling” and “locking” mechanism resist capsule formation in mice for up to a year., The high mechanical strength and long-term resistance to the fibrous capsule formation are two major challenges for implantable materials. Unfortunately, these two distinct properties do not come together and instead compromise each other. Here, we report a unique class of materials by integrating two weak zwitterionic hydrogels into an elastomer-like high-strength pure zwitterionic hydrogel via a “swelling” and “locking” mechanism. These zwitterionic-elastomeric-networked (ZEN) hydrogels are further shown to efficaciously resist the fibrous capsule formation upon implantation in mice for up to 1 year. Such materials with both high mechanical properties and long-term fibrous capsule resistance have never been achieved before. This work not only demonstrates a class of durable and fibrous capsule–resistant materials but also provides design principles for zwitterionic elastomeric hydrogels.

To accelerate the vascularization of engineered tissue, an endothelial-specific fusion protein (VEGF-Fc), which consists of a human vascular endothelial growth factor (VEGF) and an immunoglobulin G Fc region, was fabricated and used to construct a bioactive interface in a porous scaffold. In this study, VEGF-Fc was immobilized on polycarprolactone (PCL) porous scaffolds by steeping, which is mediated by the hydrophobic binding of the Fc domain. The VEGF-Fc proteins were distributed stably and uniformly throughout the PCL porous scaffolds without affecting their surface morphology and mechanical properties. The immobilized VEGF-Fc activated the phosphorylation of VEGF2 receptor continuously, and further promoted the expressions of PI3K and MAPK, which effectively enhanced the adhesion and proliferation of human vascular endothelial cells (HUVECs). Furthermore, the immobilized VEGF-Fc promoted the migration of HUVECs into the scaffolds, and also enhanced the cellularization and ECM deposition in the subcutaneous implanted scaffolds in rats, which synergistically supported the vascularization of the scaffold in vivo. In view of the advantages of easy use, stability and efficiency, the VEGF-Fc fusion protein appeared to be a promising candidate for surface modification of porous scaffolds for tissue engineering.