Search

Bismuth has garnered significant interest as an anode material for magnesium batteries (MBs) because of its high volumetric specific capacity and low working potential. Nonetheless, the limited cycling performance (≤100 cycles) limits the practical application of Bi as anode for MBs. Therefore, the improvement of Bi cycling performance is of great significance to the development of MBs and is also full of challenges. Here, Bi nanoparticles encapsulated in nitrogen-doped carbon with single-atom Bi embedded (Bi@NC) are prepared and reported as an anode material for MBs. Bi@NC demonstrates impressive performance, with a high discharge capacity of 347.5 mAh g−1 and good rate capability (206.4 mAh g−1@500 mA g−1) in a fluoride alkyl magnesium salt electrolyte. In addition, Bi@NC exhibits exceptional long-term stability, enduring 400 cycles at 500 mA g−1. To the best of our knowledge, among reported Bi and Bi-based compounds for MBs, Bi@NC exhibits the longest cycle life in this work. The magnesium storage mechanism of Bi@NC is deeply studied through X-ray diffraction, transmission electron microscopy and X-ray photoelectron spectroscopy. This work provides some guidance for further improving the cycling performance of other alloy anodes in MBs.

Carbon-based materials are one of the ideal negative electrode materials for potassium ion batteries. However, the limited active sites and sluggish diffusion ion kinetics still hinder its commercialization process. To address these problems, we design a novel carbon composite anode, by confining highly reactive short-chain sulfur molecules into nitrogen-doped hollow carbon nanospheres (termed SHC-450). The formation process involves the controlled synthesis of hollow polyaniline (PANI) nanospheres as precursors via an Ostwald ripening mechanism and subsequent sulfuration treatment. The high content of constrained short-chain sulfur molecules (20.94 wt%) and considerable N (7.15 wt%) ensure sufficient active sites for K+ storage in SHC-450. Accordingly, the SHC-450 electrode exhibits a high reversible capacity of 472.05 mAh g−1 at 0.1 A g−1 and good rate capability (172 mAh g−1 at 2 A g−1). Thermogravimetric analysis shows that SHC-450 has impressive thermal stability to withstand a high temperature of up to 640 °C. Ex situ spectroscopic characterizations reveal that the short-chain sulfur provides high capacity through reversible formation of K2S. Moreover, its special hollow structure not only provides ample space for highly active short-chain sulfur reactants but also effectively mitigates volume expansion during the sulfur conversion process. This work offers new perspectives on enhanced K+ storage performance from an interesting anode design and the space-limited domain principle.

Calcific aortic valve disease (CAVD) is a common heart valve disease in aging populations, and aberrant osteogenic differentiation of valvular interstitial cells (VICs) plays a critical role in the pathogenesis of ectopic ossification of the aortic valve. miR-214 has been validated to be involved in the osteogenesis process. Here, we aim to investigate the role and mechanism of miR-214 in CAVD progression. miR-214 expression was significantly downregulated in CAVD aortic valve leaflets, accompanied by upregulation of osteogenic markers. Overexpression of miR-214 suppressed osteogenic differentiation of VICs, while silencing the expression of miR-214 promoted this function. miR-214 directly targeted ATF4 and Sp7 to modulate osteoblastic differentiation of VICs, which was proved by dual luciferase reporter assay and rescue experiment. miR-214 knockout rats exhibited higher mean transvalvular velocity and gradient. The expression of osteogenic markers in aortic valve leaflets of miR-214 knockout rats was upregulated compared to that of the wild-type group. Taken together, our study showed that miR-214 inhibited aortic valve calcification via regulating osteogenic differentiation of VICs by directly targeting ATF4 and Sp7, indicating that miR-214 may act as a profound candidate of targeting therapy for CAVD.

In recent years, China’s environmental pollution is serious, manufacturing industry has become one of the main targets of government environmental regulation. This paper uses the SBM model to calculate efficiency value of 29 manufacturing industries from 2008 to 2017. The results show that the overall performance of environmental regulation in manufacturing industry is high (the average efficiency value is 0.7806), but it shows a declining trend. The efficiency of environmental regulation also varies widely. The government should consider focusing on the 11 industries with low SBM value in the next step to improve the performance of environmental regulation.

Tricuspid regurgitation (TR) has become one of the most common valve diseases. Patients with severe TR are often at high surgical mortality risk. Transcatheter tricuspid valve interventions have emerged as a promising alternative to open-heart surgery. The LuX-Valve is a novel radial force-independent transcatheter tricuspid valve replacement system. We presented here the first patient treated for symptomatic TR using the LuX-Valve replacement system in September 2018. Four-year follow-up outcomes suggested that the bioprosthesis was in normal function, with stable hemodynamics (mean transtricuspid gradient 2.55 mmHg) and the patient’s clinical symptoms were significantly improved; thus indicating that it is a safe, effective, and satisfactory case of the LuX-Valve application in treating a patient with severe TR.

Purpose: To report the results of a hybrid approach to aortic arch repair using an innovative unibody double-branched stent graft in a canine model. Materials and methods: The stent-graft system consists of two parts: the main body and two branches for reconstruction of the supra-arch branches. There is a 2-cm-long suturing portion at the proximal end of the main body. Twenty adult German sheep dogs underwent a hybrid surgical treatment to place the stent-grafts into the proximal descending aorta and the supra-arch branches. Outcomes were assessed by operative mortality, complications, imaging studies, and histomorphometric analyses. Results: Placement of the stent-graft was performed successfully in all dogs without complications. One dog died of respiratory failure due to early extubation. The other dogs survived to 6 months without complications, at which time they were sacrificed. The mean cardiopulmonary bypass time was 80.3 ± 7.3 mins and hypothermic circulatory arrest time was 10.7 ± 1.9 min. The average blood loss was 373.5 mL. At 6 months, postoperative aortic imaging indicated that the main body and branches of the stent-graft were fully open and in satisfactory position. No migration, deformation, or endovascular leakage was observed. Histomorphometric results showed normal arrangement of medial and adventitial elastic fibers, moderately proliferated intima, with or without neo-microvessels, and microscopic morphological changes in internal elastic lamina. Conclusions: These results demonstrate that it is possible and safe to reconstruct the aortic arch with the novel open-branched stent-graft placement.

The bottom of fuel tank is a lightweight thin-walled part with large size and complex surfaces. Its processing quality directly determines the reliability of the whole rocket. This paper conducts the predictions of both milling stability and surface location error (SLE) based on the theory of regenerative chatter vibration. We proposed a new type of stability lobe diagram (SLD) combined with the contour map of SLE. Then, we studied the changes of the bottom's dynamic parameters through FEA method, which would be influenced by the removal of material during machining. By using the dynamic parameters as inputs, we obtained a series of SLDs and the processing parameters which will lead to no-chatter and low SLE under different processing periods. The efficient and high-precision milling of the fuel tank's bottom can also be guaranteed. Keywords: Thin-walled parts, Bottom of fuel tank, Chatter, Milling stability, Surface location error, Processing parameter

Abstract Background Concern lingers that dialysis therapy at for-profit (versus not-for-profit) hemodialysis facilities in the United States may be associated with higher mortality, even though 4 of every 5 contemporary dialysis patients receive therapy in such a setting. Methods Our primary objective was to compare the mortality hazards of patients initiating hemodialysis at for-profit and not-for-profit centers in the United States between 1998 and 2003. For-profit status of dialysis facilities was determined after subjects received 6 months of dialysis therapy, and mean follow-up was 1.7 years. Results Of the study population (N = 205,076), 79.9% were dialyzed in for-profit facilities after 6 months of dialysis therapy. Dialysis at for-profit facilities was associated with higher urea reduction ratios, hemoglobin levels (including levels above 12 and 13 g/dL [120 and 130 g/L]), epoetin doses, and use of intravenous iron, and less use of blood transfusions and lower proportions of patients on the transplant waiting-list (P < 0.05). Patients dialyzed at for-profit and at not-for-profit facilities had similar mortality risks (adjusted hazards ratio 1.02, 95% CI 0.99–1.06, P = 0.143). Conclusion While hemodialysis treatment at for-profit and not-for-profit dialysis facilities is associated with different patterns of clinical benchmark achievement, mortality rates are similar.

Background: We investigated the potential relationship between age-related conditions, particularly sarcopenia and ischemic stroke (IS), through a twosample Mendelian randomization (MR) study. Methods: We conducted a two-sample bidirectional MR study to investigate the relationship between sarcopenia and stroke. Genetic instruments for sarcopenia were derived from the UK Biobank, while data on IS and its subtypes were obtained from the MEGASTROKE consortium. Inverse variance weighting (IVW) served as the primary analytical method. Additionally, heterogeneity and pleiotropy were assessed to ensure the robustness of the findings. Results: The analysis indicates a negative correlation between appendicular lean mass (ALM) and small vessel stroke (SVS; OR = 0.790, 95% CI: 0.703--0.888, p < 0.001), a positive correlation with cardioembolic stroke (CES; OR = 1.165, 95% CI: 1.058--1.284, p = 0.002), and no causal relationship with any ischemic stroke (AIS) or large artery stroke (LAS). Additionally, SVS is negatively associated with right-hand grip strength (OR = 0.639, 95% CI: 0.437--0.934, p = 0.021), while AIS, LAS, and CES do not exhibit a causal relationship with grip strength. Furthermore, no causal relationship was identified between left-hand grip strength, usual walking pace, and IS or its subtypes. MR analysis reveals only a negative association between CES and usual walking pace (OR = 0.989, 95% CI: 0.980--0.998, p = 0.013), with no associations found between other IS subtypes and sarcopenia-related traits. Conclusion: This study demonstrates that a reduction in ALM and right-hand grip strength is associated with SVS, whereas decreased ALM may serve as a protective factor against CES. Conversely, our analysis suggests that CES can impact walking speed. Overall, these findings provide valuable insights into the prevention and treatment of these conditions. [ABSTRACT FROM AUTHOR]

The potential of magnetic nanofluids as fracturing fluids in tight oil reservoir development is investigated. Hydrophobic magnetic nanoparticles (MNPs) are synthesized using a chemical co-precipitation method and characterized by Fourier transform infrared spectroscopy, dynamic light scattering, and scanning electron microscopy. A magnetic nanofluid is prepared as a pad fracturing fluid in accordance with the aforementioned methodology. Significantly, the effects of homogeneous and heterogeneous magnetic fields were evaluated on oil recovery and formation damage through core flooding experiments. The synthesized MNPs are hydrophobic, 20 nm in diameter, and stabilized by one layer of surfactant molecules in an aqueous solution. The nanofluid exhibits a relatively higher oil recovery than the surfactant solution because of its superior function of wettability alteration. The chaining behavior of MNPs under homogeneous magnetic fields leads to severe particle retention in the pore throats, which results in a significant decrease in core permeability. In contrast, the magnetic force gradient is unique to heterogeneous magnetic fields, resulting in a 40% increase in oil recovery at a magnetic intensity of 900 G near the core, while the permeability reduction is negligible. In conclusion, the retention of nanoparticles in pore throats represents a significant obstacle to the application of nanotechnology in tight reservoirs. The utilization of hydrophobic MNPs in conjunction with heterogeneous magnetic fields presents a potential solution to this conundrum. [ABSTRACT FROM AUTHOR]

Results from observational studies examining dyslipidemia as a risk factor for diabetic retinopathy (DR) have been inconsistent. We evaluated the causal relationship between plasma lipids and DR using a Mendelian randomization approach. We pooled genome-wide association studies summary statistics from 18 studies for two DR phenotypes: any DR (N = 2,969 case and 4,096 control subjects) and severe DR (N = 1,277 case and 3,980 control subjects). Previously identified lipid-associated single nucleotide polymorphisms served as instrumental variables. Meta-analysis to combine the Mendelian randomization estimates from different cohorts was conducted. There was no statistically significant change in odds ratios of having any DR or severe DR for any of the lipid fractions in the primary analysis that used single nucleotide polymorphisms that did not have a pleiotropic effect on another lipid fraction. Similarly, there was no significant association in the Caucasian and Chinese subgroup analyses. This study did not show evidence of a causal role of the four lipid fractions on DR. However, the study had limited power to detect odds ratios less than 1.23 per SD in genetically induced increase in plasma lipid levels, thus we cannot exclude that causal relationships with more modest effect sizes exist.

Large-scale meta-analyses of genome-wide association studies (GWAS) have identified >175 loci associated with fasting cholesterol levels, including total cholesterol (TC), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), and triglycerides (TG). With differences in linkage disequilibrium (LD) structure and allele frequencies between ancestry groups, studies in additional large samples may detect new associations. We conducted staged GWAS meta-analyses in up to 69,414 East Asian individuals from 24 studies with participants from Japan, the Philippines, Korea, China, Singapore, and Taiwan. These meta-analyses identified (P

Over the past decade, significant progress has been made in the direct C-H acylation of naphthalenes, occurring at the α or β positions to yield valuable ketones through Friedel-Crafts acylation or transition-metal-catalysed carbonylative coupling reactions. Nevertheless, highly regioselective acylation of naphthalenes remains a formidable challenge. Herein, we developed a nickel-catalysed reductive ring-opening reaction of 7-oxabenzonorbornadienes with acyl chlorides as the electrophilic coupling partner, providing a new method for the exclusive preparation of β-acyl naphthalenes. [ABSTRACT FROM AUTHOR]

HPAM/PEI gel is a promising material for conformance control in hydrocarbon reservoirs. However, its use in low-permeability reservoirs is limited by the high polymer concentrations present. In this study, the gelation performance of an HPAM/PEI system with HPAM < 2.0 wt.% was systematically investigated. The gelation time for HPAM concentrations ranging from 0.4 to 2.0 wt.% varied from less than 1 h to 23 days, with the highest gel strength identified as grade H. The hydrodynamic radius manifested the primary effect of HPAM on the gelation performance. Branched PEI provided superior gelation performance over linear PEI, and the gelation performance was only affected when the molecular weight of the PEI varied significantly. The optimal number ratio of the PEI-provided imine groups and the HPAM-provided carboxylic acid functional groups was approximately 1.6:1~5:1. Regarding the reservoir conditions, the temperature had a crucial effect on the hydrodynamic radius of HPAM. Salts delayed the gelation process, and the order of ionic influence was Ca2+ > Na+ > K+. The pH controlled the crosslinking reaction, primarily due to the protonation degree of PEI and the hydrolysis degree of HPAM, and the most suitable pH was approximately 10.5. Plugging experiments based on a through-type fracture showed that multi-slug plugging could significantly improve the plugging performance of the system, being favorable for its application in fractured low-permeability reservoirs. [ABSTRACT FROM AUTHOR]

The Solow residual method, traditionally pivotal for calculating total factor productivity (TFP), is typically not applied to green TFP calculations due to its exclusion of undesired outputs. Diverging from traditional approaches and other frontier methodologies such as Data Envelopment Analysis (DEA) and Stochastic Frontier Analysis (SFA), this paper integrates undesired outputs and three types of spatial spillover effects into the conventional Solow framework, thereby creating a new spatiotemporal econometric Solow residual method (STE-SRM). Utilizing this novel method, the study computes the industrial green TFPs for 280 Chinese cities from 2003 to 2019, recalculates these TFPs using DEA-SBM and Bayesian SFA for the same cities and periods, and assesses the accuracy of the STE-SRM-derived TFPs through comparative analysis. Additionally, the paper explores the statistical properties of China's urban industrial green TFPs as derived from the STE-SRM, employing Dagum's Gini coefficient and spatial convergence analyses. The findings first indicate that by incorporating undesired outputs and spatial spillover into the Solow residual method, green TFPs are computable in alignment with the traditional Solow logic, although the allocation of per capita inputs and undesired outputs hinges on selecting the optimal empirical production function. Second, China's urban industrial green TFPs, calculated using the STE-SRM with the spatial Durbin model with mixed effects as the optimal model, show that cities like Huangshan, Fangchenggang, and Sanya have notably higher TFPs, whereas Jincheng, Datong, and Taiyuan display lower TFPs. Third, comparisons of China's urban industrial green TFP calculations reveal that those derived from the STE-SRM demonstrate broader but more concentrated results, while Bayesian SFA results are narrower and less concentrated, and DEA-SBM findings sit between these extremes. Fourth, the study highlights significant spatial heterogeneity in China's urban industrial green TFPs across different regions—eastern, central, western, and northeast China—with evident sigma convergence across the urban landscape, though absolute beta convergence is significant only in a limited subset of cities and time periods. [ABSTRACT FROM AUTHOR]