Search

BACKGROUND The emerald is loved by people because of its gorgeous color and is respected as one of the world's four major gems. Due to the high value of emeralds, a variety of synthesis and optimization methods have emerged. The hydrothermal method is one of the common methods to produce synthetic emeralds. The emeralds synthesized by this method have typical water ripple texture, showing a serrated parallel arrangement, and the characteristic peaks of the infrared absorption spectrum in the range of 2300-3100cm-1 are the main identification feature. However, some emeralds synthesized by this method do not have the above typical characteristics. This has brought a great challenge to the quality inspection agencies, and brought many doubts to the majority of consumers, and affected the stability of the gem market. OBJECTIVES It is essential to study the new emerald synthesized by this new hydrothermal method. The refractive index, density, polychromatism, and infrared absorption spectrum characteristics of the tested samples are very similar to those of natural emeralds, so infrared absorption spectrum analysis cannot obtain the supporting evidence of its cause. Based on this, the gemological and spectral characteristics of the test samples were studied by ultraviolet visible spectrum, energy dispersive X-ray fluorescence spectrometry (EDXRF) and other spectroscopic means. Finally, the test samples were determined to be a new kind of emerald synthesized by the hydrothermal method. METHODS The refractive index, birefringence, relative density, polychromaticity and weight of the samples were tested by refractometer, electronic balance, and dichroic mirror. The internal and external characteristics of the test samples, the cutting and polishing quality of the samples, and the characteristics of internal inclusions were observed by gem microscope. The infrared reflection spectrum and infrared transmission spectrum characteristics of the samples were analyzed by Fourier transform infrared spectrometer and compared with the infrared spectrum characteristics of emeralds from different origins. The absorption spectrum characteristics of the samples were analyzed by ultraviolet-visible spectrometer, focusing on the absorption peak characteristics near 830nm. The element characteristics of the samples were tested by EDXRF, because the content characteristics of Cr and Ni in emerald are the key to identify whether it is natural or not. RESULTS The mass of the tested samples was 0.17-0.56g, the refractive index was 1.571-1.588, the birefringence was 0.007-0.009, the relative density was 2.56-2.78, and the polychromaticity was obviously blue-green/green. These conventional gemological characteristics were consistent with natural emeralds. The samples were observed under a gemstone microscope, and the samples had a parallel texture of suspected water ripple, but not typical. The water ripple texture of the typical hydrothermal synthetic emeralds was serrated parallel arrangement. However, the characteristics under the gem microscope should arouse the suspicion of jewelry inspectors.The infrared reflectance spectra of the samples had characteristic peaks of 1242, 1219, 1022, 968, 810, 741, 687, 594, 528, 490, and 459cm-1. The characteristic peaks of 1242, 1219, 1022, 968, 810, 741, and 687cm-1 were caused by the stretching vibration of Si—O—Si and O—Si—O, and the characteristic peaks of 594, 528, 490, and 459cm-1 were caused by the bending vibration of Si—O and the vibration of M—O. The infrared reflection spectrum characteristics of the samples were consistent with the infrared spectrum characteristics of beryl, but the infrared spectrum characteristics of the fingerprint area could not indicate whether the samples were natural or synthetic.The infrared transmission spectra of the samples had 5445, 5273, 5109, 4874, 4800, 4650, 4547, 3321, 3222, 3027, 2953, 2928, and 2431cm-1 characteristic peaks. 5273cm-1 was caused by typeⅡ water absorption, 5445cm-1 and 5109cm-1 were caused by typeⅠ water absorption. The typeⅡ water absorption peak of the test samples was relatively sharp at 5273cm-1, and the typeⅠ water absorption peaks at 5445cm-1 and 5109cm-1 were relatively strong. Compared with previous studies, the shape and intensity of water absorption peaks of natural emerald and hydrothermally synthesized emerald were different. The infrared absorption spectrum characteristics of the water of the test sample were different from those of natural emerald, but the diagnostic direct evidence could not be obtained from the infrared absorption spectrum. The infrared peak in the range of 2300-3100cm-1 is caused by Cl- ion absorption. According to the results of previous studies, the absorption intensity of hydrothermal synthetic emeralds in this wavenumber range was significantly stronger than that of natural emeralds. The infrared absorption spectra of the test samples were relatively weak in the range of 2300-3100cm-1, which was more similar to the infrared absorption spectrum characteristics of natural emeralds in Colombia, Yunnan, Madagascar and Brazil, and was obviously different from the infrared absorption spectrum results of emeralds synthesized by the hydrothermal method. There were obvious differences between the infrared transmission absorption spectra of the traditional hydrothermal synthetic emeralds and natural emeralds. The characteristics of infrared absorption spectra are important evidence for identifying the genesis of emeralds. However, it is difficult to obtain the final accurate conclusion from the infrared absorption spectrum analysis of the test samples described in this paper, so they have been named 'new' type.The UV-Visible spectrum characteristics of the test samples showed that the absorption peak below 350nm was caused by the Fe2+-O2- charge transfer band in emerald, the absorption peak at 429nm was caused by Cr3+ ions, the broad absorption band at 550-650nm was mainly caused by Cr3+ ions, the absorption peak at 683nm was caused by Cr3+ ions, the sharp absorption peak at 956nm was caused by water absorption, and the broad absorption peak near 850nm should be caused by Fe2+ absorption, which was rarely seen in the previous hydrothermal synthesis of emerald. The combination of Cr3+ and Fe3+ replacing Al3+ makes emerald, green. The absorption peak of UV-Visible spectrum caused by Fe2+ in natural emerald was in the range of 810-850nm, and only a few of the absorption bands caused by Fe2+ in natural emeralds are not obvious. The absorption band of the UV-Visible spectra of the test samples was not obvious or weak in the range of 810-850nm, and the 850nm absorption peak of individual samples was obvious. Therefore, the emeralds examined by ultraviolet-visible spectroscopy may be synthetic, but this could not be conclusively confirmed.The EDXRF results showed that the samples had Fe, Ni and Cr elements, which was different from previous studies of natural emeralds. Yang Zhuo(2010) studies showed that the main trace elements in natural emeralds, from different origins such as Brazil, Colombia, Egypt, India, South Africa, Zimbabwe and Canada by LA-ICP-MS, were Fe, V, Cr, Mg, Na and Cs, but the content of Ni was very low, far lower than that of Cr. The content of Cr in Yunnan emeralds was 58-177μg/g, and Ni was not detected (Bai et al., 2019). The chemical element characteristics of gem-grade emeralds in Afghanistan, Brazil, Colombia, Ethiopia, Madagascar, Russia, Zambia and Zimbabwe showed that Ni element was not detected (Karampelas et al., 2019). The elemental composition of emeralds from South Africa, Afghanistan, Australia, Colombia, Egypt, Madagascar, Zambia, Zimbabwe, Tanzania and China was analyzed by electron probe microanalysis, and Ni was not detected (Lum et al., 2016). It could be seen that Cr and Fe elements coexisted in natural emeralds, but Ni was almost non-existent. EDXRF was used in this study without quantitative analysis but calibrated by the gold standard sample, and the relative peak intensity of the element was of great significance. The peak intensity of the Ni element in the test sample was much higher than that of the Cr element, which did not conform to the element content characteristics of the natural emerald, and was consistent with the high content of Ni in the hydrothermal synthesis of emerald reported by Lu and Shen (2021) and Yang et al.(2022). The comprehensive analysis showed that the test sample was a synthetic emerald. CONCLUSIONS The infrared absorption spectrum characteristics of the test samples are similar to those of natural emeralds, and the infrared absorption spectrum could not be used as a basis for identifying the genesis of emeralds. Previous studies show that a set of absorption peaks in the range of 2300-3100cm-1 in the infrared absorption spectrum is an important identification feature of the hydrothermal synthesis of emeralds, but this feature is not obvious in the tested samples. The UV-Visible spectrum of the sample shows that the absorption band near 810-850nm related to Fe2+ is not obvious. The X-ray fluorescence spectra of the samples show that the Kα peak intensity of Ni is much higher than that Kα of Cr, which is the main feature of the new emerald synthesized by the hydrothermal method. It could be seen from the experimental results that the identification of jewelry and jade is a systematic work. It is necessary to learn from the previous results and combine the comprehensive analysis of various detection methods to obtain the correct result.

AbstractAlgal oil rich in docosahexaenoic acid is easily oxidized and degraded to produce volatile short-chain compounds, leading to the deterioration of product flavor. Currently, the emulsion delivery of algal oil provides a promising approach to minimize oxidative deterioration and conceal its off-flavor. However, algal oil emulsions would also experience unanticipated oxidation as a result of the large specific surface area between the aqueous phase and the oil phase. The current paper offers a mechanism overview behind off-flavor formation in algal oil emulsions and explores corresponding strategies for the inhibition regulation. Additionally, the paper delves into the factors influencing lipid oxidation and the perception of off-flavors in such emulsions. To mitigate the development of off-flavors in algal oil emulsions resulting from oxidation, it is crucial to decline the likelihood of lipid oxidation and proactively prevent the creation of off-flavors whenever possible. Minimizing the release of volatile off-flavor compounds that are inevitably generated is also considered effective for weakening off-flavor. Moreover, co-encapsulation with particular desirable aroma substances could improve the overall flavor characteristics of emulsions. [ABSTRACT FROM AUTHOR]

Methylation panels, tools for investigating epigenetic changes associated with diseases like cancer, can identify DNA methylation patterns indicative of disease, providing diagnostic or prognostic insights. However, the application of methylation panels focusing on the sex‐determining region Y‐box 1 (SOX1) and paired box gene 1 (PAX1) genes for diagnosing cervical lesions is under‐researched. This study aims to examine the diagnostic performance of PAX1/SOX1 gene methylation as a marker for cervical precancerous lesions and its potential application in triage diagnosis. From September 2022 to April 2023, 181 patients with abnormal HPV‐DNA tests or cytological exam results requiring colposcopy were studied at Hubei Maternal and Child Health Hospital, China. Data were collected from colposcopy, cytology, HPV‐DNA tests, and PAX1/SOX1 methylation detection. Patients were categorized as control, cervical intraepithelial neoplasia Grade 1 (CIN1), Grade 2 (CIN2), Grade 3 (CIN3), and cervical cancer (CC) groups based on histopathology. We performed HPV testing, liquid‐based cytology, and PAX1/SOX1 gene methylation testing. We evaluated the diagnostic value of methylation detection in cervical cancer using DNA methylation positivity rate, sensitivity, specificity, and area under the curve (AUC), and explored its potential for triage diagnosis. PAX1/SOX1 methylation positivity rates were: control 17.1%, CIN1 22.5%, CIN2 100.0%, CIN3 90.0%, and CC 100.0%. The AUC values for PAX1 gene methylation detection in diagnosing CIN1+, CIN2+, and CIN3+ were 0.52 (95% confidence interval [CI]: 0.43–0.62), 0.88 (95% CI: 0.80–0.97), and 0.88 (95% CI: 0.75–1.00), respectively. Corresponding AUC values for SOX1 gene methylation detection were 0.47 (95% CI: 0.40–0.58), 0.80 (95% CI: 0.68–0.93), and 0.92 (95% CI: 0.811–1.00), respectively. In HPV16/18‐negative patients, methylation detection showed sensitivity of 32.4% and specificity of 83.7% for CIN1+. For CIN2+ and CIN3+, sensitivity was all 100%, with specificities of 83.0% and 81.1%. Among the patients who underwent colposcopy examination, 166 cases had cytological examination results ≤ASCUS, of which 37 cases were positive for methylation, and the colposcopy referral rate was 22.29%. PAX1/SOX1 gene methylation detection exhibits strong diagnostic efficacy for cervical precancerous lesions and holds significant value in triage diagnosis. [ABSTRACT FROM AUTHOR]

AbstractThe evaluation of the flow direction of platinum group elements (PGEs) during gold-copper ore mining is challenging due to the uneven distribution and low content. Therefore, it is vital to accurately and simultaneously determine ultra-trace PGEs Pt, Pd, Rh, and Ir in gold mining residue samples. In this study, a method to simultaneously determine ultra-trace Pt, Pd, Rh, and Ir in gold mining residue is reported using Sb–Cu fire assay, microwave digestion, and inductively coupled plasma-mass spectrometry (ICP-MS). The Sb–Cu fire assay was used to enrich Pt, Pd, Rh, and Ir, obtaining Sb–Cu alloy particles that concentrate these elements. An optimal microwave method was employed to digest the Sb–Cu alloy particles. In ICP-MS, the collision reaction interface was used to eliminate the interferences of other elements and improve the accuracy. Moreover, the matrix-matched multi-external standards combined with internal standard calibration were utilized to reduce the error. High concentrations of Au, Ag, and Pb showed no interferences with Pt, Pd, Rh, or Ir determination. The limits of detection for Pt, Pd, Rh, and Ir were 0.018, 0.052, 0.064, 0.035 ng·g−1, respectively, and the relative standard deviation was 5.18, 4.66, 1.55, and 3.17%. Additionally, the determination of Pt, Pd, Rh, and Ir in standard reference materials showed good agreement with the certified values. In summary, a reliable and efficient method is provided to determine various PGEs which is of great significance for gold-copper ore mining. [ABSTRACT FROM AUTHOR]

A three-dimensional heat transfer model is built according to the rotor structure of an asynchronous motor, and three-dimensional temperature fields of the rotor under different working conditions, such as the unloaded, rated loaded and that with broken rotor bars, are studied based on the finite element numerical method and experiments. The feasibility of inspecting the motor faults by infrared thermography is also discussed. The following conclusions can be drawn from the study: the temperature field is uniform in the circumferential direction of the rotor and the temperature changes along the axial direction of the rotor with the maximum temperature appearing at the point near the power-output end; the heat transfer in the axes of the motor is the main means of heat dissipation of the rotor; the loss of bearing has a more sensitive effect on the temperature field of the motor end cover when the motor is unloaded; therefore, under this working condition it is easier to detect the fault of the motor bearing by thermography; no obvious temperature change appears when rotor bars are broken, so this fault is out of the range that can be detected by thermography. This study is helpful for undergraduates to understand the inner temperature distribution of the asynchronous motor, and is also of great importance for engineers in the field of nondestructive inspection of motor faults. (Contains 1 table and 21 figures.)

Aiming at the problem that the lack of accurate and efficient off-topic detection model for current Automated English Scoring System in China, an unsupervised off-topic essay detection model based on hybrid semantic space was proposed. Firstly, the essay and its essay prompt are respectively represented as noun phrases by using a neural-network dependency parser. Secondly, we introduce a method to construct a hybrid semantic space. Thirdly, we propose a method to represent the noun phrases of the essay and its prompt as vectors in hybrid semantic space and calculate the similarity between the essay and its prompt by using the noun phrase vectors of them. Finally, we propose a sort method to set the off-topic threshold so that the off-topic essays can be identified efficiently. The experimental results on four datasets totaling 5000 essays show that, compared to the previous off-topic essay detection models, the proposed model can detect off-topic essays with higher accuracy, and the accuracy rate over all essay data sets reaches 89.8%.

Polylactic acid (PLA) is one of the most promising biodegradable materials, which can reduce the environmental pollution caused by food and material industry. The effect of the addition proportion of nano‐silver and different food simulant on the migration and the performance changes of film during migration were evaluated, revealing the association between the performance changes and nano‐silver migration. The results showed that nano‐silver had the largest migration amount and the fastest migration rate in 4% (v/v) acetic acid solution, followed by 50% (v/v) ethanol solution, and the lowest in isooctane solution. Performance changes were affected by the compatibility of silver nanoparticles and PLA, and the strength of the interaction between the film and acetic acid. Performances of composite film deteriorated during high proportions of nano‐silver addition and long soaking. Adding a small amount of nano‐silver to the composite was the effective method considering the balance between good performances and migration. [ABSTRACT FROM AUTHOR]

BACKGROUND: Our living environment is being increasingly polluted by petroleum‐based plastics and there is an increasing demand for biodegradable food packaging. In this study, the effect of various ultrahigh‐pressure (UHP) treatments (0, 200 and 400 MPa) on the microstructure and thermal, barrier and mechanical properties of poly(lactic acid) (PLA)/ZnO nanocomposite films was studied. RESULTS: The film‐forming solution was processed using UHP technology. The crystallinity, strength and stiffness of the composite film after UHP treatment increased. In addition, barrier property analysis showed that the UHP treatment significantly (P < 0.05) reduced the oxygen permeability and water vapor permeability (WVP) coefficient of the PLA/ZnO nanocomposite film. Furthermore, the WVP value of the film treated at 400 MPa (50 g kg−1 nano‐ZnO content) was the lowest and reduced by 47.3% compared with that of pure PLA film. The improvement in these properties might be due to the interaction between nano‐ZnO and PLA matrix promoted by UHP treatment. CONCLUSIONS: Therefore, the application of UHP technology on the film‐forming solution could improve the crystallinity and functional properties of the nanocomposite film, and has great potential in the production of food packaging films with ideal functions. © 2021 Society of Chemical Industry [ABSTRACT FROM AUTHOR]