Search

This paper deals with the design of robust model-based fault detection and isolation (FDI) systems for atmospheric reentry vehicles. This work draws expertise from actions undertaken within a project at the European level, which develops a collaborative effort between the University of Bordeaux, the European Space Agency, and European Aeronautic Defence and Space Company Astrium on innovative and robust strategies for reusable launch vehicles (RLVs) autonomy. Using an H∞/H- setting, a robust residual-based scheme is developed to diagnose faults on the vehicle wing-flap actuators. This design stage is followed by an original and specific diagnosis-oriented analysis phase based on the calculation of the generalized structured singular value. The latter provides a necessary and sufficient condition for robustness and FDI fault sensitivity over the whole vehicle flight trajectory. A key feature of the proposed approach is that the coupling between the in-plane and out-of-plane vehicle motions, as well as the effects that faults could have on the guidance, navigation, and control performances, are explicitly taken into account within the design procedure. The faulty situations are selected by a prior trimmability analysis to determine those for which the remaining healthy control effectors are able to maintain the vehicle around its center of gravity. Finally, some performance indicators including detection time, required onboard computational effort, and CPU time consumption are assessed and discussed. Simulation results are based on a nonlinear benchmark of the HL-20 vehicle under realistic operational conditions during the autolanding phase. The Monte Carlo results are quite encouraging, illustrating clearly the effectiveness of the proposed technique and suggesting that this solution could be considered as a viable candidate for future RLV programs. [ABSTRACT FROM AUTHOR]

Summary: This paper deals with the development of a mixed active‐passive microvibration mitigation solution capable of attenuating the transmitted vibrations generated by reaction wheels to a satellite structure. A dedicated simulation environment, provided by the European Space Agency and Airbus Defence and Space industries, serves as a support for testing the proposed solution at satellite level. This paper covers modeling, control system design, and worst‐case analysis for a typical satellite observation mission that requires high pointing stability. Combined with a novel disturbance model for the reaction wheel perturbations, the pointing performance and stability requirements are reformulated as bounds on the worst‐case L2 system gains. Subsequently, the active microvibration controller is tuned to manage the conflicting design goals and optimize different trade‐offs between robustness and performance. Finally, robust stability margins and worst‐case performance bounds with respect to various system uncertainties, time‐varying reaction wheel spin rates, actuator saturation, and time delays are obtained using the structured singular value, integral quadratic constraints, and time‐domain nonlinear simulations. [ABSTRACT FROM AUTHOR]

This article presents and validates a general framework to build a linear dynamic Finite Element-based model of large flexible structures for integrated Control/Structure design. An extension of the Two-Input Two-Output Port (TITOP) approach is here developed. The authors had already proposed such framework for simple beam-like structures: each beam was considered as a TITOP sub-system that could be interconnected to another beam thanks to the ports. The present work studies bodies with multiple attaching points by allowing complex interconnections among several sub-structures in tree-like assembly. The TITOP approach is extended to generate NINOP (N-Input N-Output Port) models. A Matlab toolbox is developed integrating beam and bending plate elements. In particular a NINOP formulation of bending plates is proposed to solve analytic two-dimensional problems. The computation of NINOP models using the outputs of a MSC/Nastran modal analysis is also investigated in order to directly use the results provided by a commercial finite element software. The main advantage of this tool is to provide a model of a multibody system under the form of a block diagram with a minimal number of states. This model is easy to operate for preliminary design and control. An illustrative example highlights the potential of the proposed approach: the synthesis of the dynamical model of a spacecraft with two deployable and flexible solar arrays. [ABSTRACT FROM AUTHOR]

The research work presented in this paper focuses on the development of a mixed active-passive microvibration mitigation solution capable of attenuating the transmitted vibrations generated by reaction wheels to a satellite structure. A representative benchmark provided by the European Space Agency (ESA) and Airbus Defence and Space, serves as a support for testing the proposed solution. The paper also covers modeling and design issues as well as a deep analysis of the solution within the H ∞ / μ setting. Especially, an uncertainty modeling strategy is proposed to extract a Linear Fractional Transformation (LFT) model. Insight is naturally provided into various dynamical interactions between the plant elements such as bearing and isolator flexibility, gyroscopic effects, actuator dynamics and feedback-loop delays. The design of the mitigation solution is formulated into the H ∞ / μ framework leading to a robust H ∞ control strategy capable of achieving exemplary active attenuation performance across a wide range of reaction wheel speeds. A systematic analysis procedure based on the structured singular value μ is used to assess and demonstrate the robust stability and robust performance of the microvibration mitigation strategy. The proposed analysis method is also shown to be a powerful and reliable solution to identify worst-case scenarios without relying on traditional Monte Carlo campaigns. Time domain simulations based on a nonlinear high-fidelity industrial simulator are included as a validation step. [ABSTRACT FROM AUTHOR]