Search

Five high entropy carbide ceramics, (Hf0.2,Nb0.2,Ta0.2,Ti0.2,Zr0.2)C, (Cr0.2,Hf0.2,Ta0.2,Ti0.2,Zr0.2)C, (Hf0.2,Mo0.2,Ta0.2,Ti0.2,Zr0.2)C, (Hf0.2,Ta0.2,Ti0.2,W0.2,Zr0.2)C, and (Hf0.2,Mo0.2,Ti0.2,W0.2,Zr0.2)C, were synthesized by carbothermal reduction of oxides and direct current sintering. The five high entropy carbide ceramics were determined to be nominally phase-pure with relative densities of more than 98.9% and mean grain sizes of less than 5 μm. Average Vickers hardness values ranged from 19.2 ± 0.4 GPa for (Hf0.2,Nb0.2,Ta0.2,Ti0.2,Zr0.2)C at a load of 2 kgf to 43.5 ± 0.4 GPa for (Hf0.2,Mo0.2,Ti0.2,W0.2,Zr0.2)C at a load of 0.05 kgf. Hardness generally increased with increasing the valence electron concentration and strain as measured by the Williamson–Hall analysis. However, neither correlation was conclusive enough to be a clear indicator of hardness. Instead, it was determined that a combination of effects that includes the valence electron concentration, lattice strain, and grain size all contribute to the hardness of high entropy carbide ceramics. [ABSTRACT FROM AUTHOR]

Magnesium aluminate has the spinel structure along with good mechanical, chemical, and thermal properties. Magnesium aluminate has a wide range of applications including refractory ceramics, optically transparent ceramic windows, and armors. Its low dielectric permeability and low loss tangent enable its applications for integrated electronic devices, as well. In this paper, MgO and Al2O3 powders were mixed in a one-to-one molar ratio and calcined at temperatures ranging from 1500 to 1800oC to produce phase pure spinel. Thereafter, pellets were crushed and treated in a planetary ball mill for 60 min to obtain a fine powder. All powders were examined for phase composition, crystal structure, and morphology. The obtained results showed that by increasing the temperature, samples with higher density were synthesized. Milling for 1 h led to formation of larger particles, but finer powders after milling. XRPD and Raman spectroscopy showed disorder in the crystal structure after milling.

Thermal and electrical properties were investigated for five nominally phase‐pure high entropy carbide ceramics. The compositions (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)C, (Cr0.2Hf0.2Ta0.2Ti0.2Zr0.2)C, (Hf0.2Mo0.2Ta0.2Ti0.2Zr0.2)C, (Hf0.2Ta0.2Ti0.2W0.2Zr0.2)C, and (Hf0.2Mo0.2Ti0.2W0.2Zr0.2)C were synthesized by carbothermal reduction of oxides. The thermal diffusivity and heat capacity were measured from room temperature to 1800°C. The room temperature thermal conductivity ranged from 5.1 W/mK for (Hf0.2Mo0.2Ti0.2W0.2Zr0.2)C to 9.0 W/mK for (Cr0.2Hf0.2Ta0.2Ti0.2Zr0.2)C. The thermal conductivity increased over the temperature range with maximum conductivities of 19.6 W/mK measured for (Hf0.2Mo0.2Ta0.2Ti0.2Zr0.2)C to 29.7 W/mK for (Cr0.2Hf0.2Ta0.2Ti0.2Zr0.2)C at 1800°C. The electron contribution to thermal conductivity calculated from measured electrical resistivity varied from 41% to 52% of the total thermal conductivity. The tungsten and molybdenum containing compositions had higher phonon contributions while the niobium and chromium containing compositions had nearly equal electron and phonon contributions to thermal conductivity. [ABSTRACT FROM AUTHOR]

Oxidation behavior of additively manufactured ZrB2–SiC in air and in CO2 is reported in the temperature range of 700–1000 °C. Observed scale morphologies in air and in CO2 were similar, featuring an outer borosilicate layer and an inner porous zirconia layer containing partially oxidized silicon carbide particles and remnant borosilicate products. Oxide scale thicknesses and parabolic scaling constants in air were approximately twice those observed in CO2 across all studied temperatures. Activation energies for oxidation of 140 ± 20 kJ/mol in air and 110 ± 20 kJ/mol in CO2 were determined, indicating similar diffusion processes that appear to be rate-limiting. The formation of protective scales across wide temperature ranges both in air and in CO2 makes additively manufactured ZrB2–SiC an attractive candidate for high-temperature industrial process applications featuring varied oxidants such as heat exchangers. [ABSTRACT FROM AUTHOR]

Super‐hard (Hf,Mo,Ti,V,W)B2 was synthesized by boro‐carbothermal reduction and densified by spark plasma sintering. This composition was produced for the first time as a single‐phase ceramic in the present research. The optimized ceramic had a single hexagonal AlB2‐type crystalline phase with a grain size of 3.8 µm and homogeneous distribution of the constituent metals. The Vickers hardness exhibited the indentation size effect, increasing from 27 GPa at a load of 9.8 N to as high as 66 GPa at a load of 0.49 N. This is the highest hardness reported to date for high entropy boride ceramics. [ABSTRACT FROM AUTHOR]

Under the sponsorship of the U.S. National Science Foundation, a workshop on emerging research opportunities in ceramic and glass science was held in September 2016. Reported here are proceedings of the workshop. The report details eight challenges identified through workshop discussions: Ceramic processing: Programmable design and assembly; The defect genome: Understanding, characterizing, and predicting defects across time and length scales; Functionalizing defects for unprecedented properties; Ceramic flatlands: Defining structure-property relations in free-standing, supported, and confined two-dimensional ceramics; Ceramics in the extreme: Discovery and design strategies; Ceramics in the extreme: Behavior of multimaterial systems; Understanding and exploiting glasses and melts under extreme conditions; and Rational design of functional glasses guided by predictive modeling. It is anticipated that these challenges, once met, will promote basic understanding and ultimately enable advancements within multiple sectors, including energy, environment, manufacturing, security, and health care.

To date, the thermal and electrical properties of three‐phase ceramics containing a boride phase, silicon carbide, and boron carbide have not been studied in detail. Further, the effect of the source of the boride powder has also not been investigated. This study produced three‐phase ceramics containing titanium diboride, silicon carbide, and boron carbide using three different TiB2 sources: commercial powder, TiB2 synthesized by boro/carbothermal reduction, or (Ti,Cr)B2 synthesized by boro/carbothermal reduction to address the effect of the TiB2 source. Ceramics containing synthesized TiB2 or (Ti,Cr)B2 reached >99% relative density, while the ceramic produced from commercial powder reached ∼93% relative density. The addition of Cr reduced both the thermal and electrical conductivities, but had little effect on the Vickers hardness. The (Ti,Cr)B2–SiC–B4C ceramic had a thermal conductivity of ∼33 W/m K, an electrical conductivity of ∼105 S/m, and a hardness of ∼61 GPa at 0.49 N. The highest hardness of ∼66 GPa at a load of 0.49 N was for the TiB2–SiC–B4C ceramic made with synthesized TiB2 powder. [ABSTRACT FROM AUTHOR]