Search

Additive manufacturing methods give the opportunity to produce interesting, new structures with a more complicated topology than would be possible using traditional methods. Using the selective laser sintering method, a disk with a high roughness and porous structure was produced. Studies of material surface were performed on microscopic devices. An in vitro experiment was performed on the manufactured disk using mice fibroblastic cells. The designed shape enabled the growth of the cell culture in the disc pores and ensured impermeability of the disc base. On the basis of the average viability of 79%, which is close to reference well (80%), preliminary results confirmed that the manufactured structures create sufficiently comfortable conditions for the cell cultures without the need to design their internal topography. Controlling the production parameters of SLS printing allows obtaining the structures characterized by spatial and surface porosity without designing inner geometry of the structure. Polyamide 2200 (PA2200) powder with a laser beam, offers new possibilities for producing surfaces used in the tissue engineering, bioreactors, and microfluidics devices. [ABSTRACT FROM AUTHOR]

This work attempts to assess the influence of process parameters on the change of mechanical properties and the degree of crystallinity of polylactide (PLA). PLA is a biodegradable material that has been widely used in various areas—from packaging, through medicine, to 3D printing, where it is used to produce prototypes. The method of processing is important, because the technological process and its parameters have a significant impact on the quality of the finished product. Their appropriate selection depends on quality and mechanical properties. The process parameters have an impact on the structure of PLA, specifically on the share of the crystalline phase, which is also important from the point of view of the functional properties of the finished product. This work assessed the impact of the technological parameters of the injection process on the final properties of the obtained samples. The obtained results of static tensile strength, hardness and differential scanning calorimetry (DSC) analysis confirm that changing these parameters affects the material properties. [ABSTRACT FROM AUTHOR]

Introducing fillers into polymeric materials is one of the methods of modifying the properties or reducing the costs of polymeric materials. Thanks to their use, it is possible to obtain new materials with interesting mechanical and chemical properties. Some features are often improved among the new materials obtained, while others deteriorate. In this work, an attempt was made to obtain a polymer composite based on PLA filled with cork flour in amounts of 5%, 10%, 15%, 20% and 30% by weight. The processing and sample preparation process using injection molding technology was assessed and the basic mechanical properties were assessed. The research shows that it is possible to obtain PLA products with a cork filler without the mixing process on an extruder, but only by using an injection molding machine and appropriately selecting the parameters of the technological process. Tests of mechanical properties showed deterioration of parameters, but not to such an extent that the obtained composites were disqualified from use in products that are not subject to heavy mechanical loads. The undoubted advantage of the obtained materials is maintaining their so-called "green" character and thus the ability to biodegrade. [ABSTRACT FROM AUTHOR]

Copyright of Polish Technical Review is the property of Wydawnictwo SIGMA-NOT and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)