Search

Imbalanced joint load distribution across the tibiofemoral surface is a risk factor for osteoarthritic changes to this joint. Lateral wedge insoles, with and without arch support, are a form of biomechanical intervention that can redistribute tibiofemoral joint load, as estimated by external measures of knee load. The objective of this study was to examine the effect of these insoles on the internal joint contact characteristics of osteoarthritic knees during weightbearing. Fifteen adults with tibiofemoral osteoarthritis underwent magnetic resonance imaging of the affected knee, while standing under 3 insole conditions: flat control, lateral wedge alone, and lateral wedge with arch support. Images were processed, and the surface area and centroid location of joint contact were quantified separately for the medial and lateral tibiofemoral compartments. Medial contact surface area was increased with the 2 lateral wedge conditions compared with the control (P ≤.012). A more anterior contact centroid was observed in the medial compartment in the lateral wedge with arch support compared with the lateral wedge alone (P =.009). Significant changes in lateral compartment joint contact outcomes were not observed. These findings represent early insights into how loading at the tibiofemoral interface may be altered by lateral wedge insoles as a potential intervention for knee osteoarthritis. [ABSTRACT FROM AUTHOR]

The article provides readers with a detailed overview of the AutoMedPrint technology, its advantages and opportunities, based on a number of studies and case examples. The AutoMedPrint system represents a significant advancement in the field of orthopedics, offering a comprehensive solution for the automated design and rapid production of personalized orthopedic and prosthetic devices through 3D printing technology. This paper details the system’s capabilities and methodologies behind it, which include the design and manufacturing of various devices such as wrist hand orthoses (WHO) and ankle foot orthoses (AFO), among others. These devices are crafted using data obtained from precise anthropometric measurements, allowing for high customization to meet individual patient needs. The AutoMedPrint system enhances the quality of life for patients by providing devices that are not only functional and cost-effective but also rapidly produced, ensuring timely intervention. Case studies demonstrate the system’s effectiveness in practical scenarios, highlighting its potential to revolutionize orthopedic care by integrating new materials and technologies that adapt to changing medical and patient requirements. The discussion extends to the lifecycle of the produced devices, emphasizing sustainability and continuous improvement, ensuring the system’s relevance and efficacy in modern medical practice. [ABSTRACT FROM AUTHOR]

Aims: The World Health Organization points out that, by 2030, two billion people will need at least one assistive product. 3D printing can be used to meet the demands when dispensing these products. Purpose: This review aims to map the use of 3D printing in the manufacture of orthoses and prostheses for people with physical disability at rehabilitation centers. Methods: Publications that deal with the use of 3D printing for the manufacture of orthoses and prostheses were used, preferably studies from 2012 to 2022. Results: The majority of studies, 56.25%, were quantitative and 46.25% were evaluative research. None of the studies were characterized as developed at rehabilitation centers. 75% of them had the participation of people with physical disability. The use of 3D printing was, for the most part, for the development of assistive technologies for the upper limbs at 56.25%, while 31.25% were for the lower limbs. Conclusion: The assistive products developed were orthoses and prostheses for the wrist, hands, fingers, upper limbs, writing devices, sockets, knees, and feet. Although there were positive results in their performance, some limitations related to strength, stiffness, and resistance were observed. [ABSTRACT FROM AUTHOR]

Background: Running is a widely practiced sport worldwide associated with a host of benefits on cardiovascular, metabolic, musculoskeletal, and mental health, but often leads to musculoskeletal overuse injuries. The prescription of a foot orthosis (FO) is common to manage musculoskeletal impairments during physical activity or functional tasks. Although FOs are frequently prescribed by clinicians for symptomatic populations of runners, the existing literature supporting the prescription of FOs in runners has predominantly focused on either uninjured individuals or a mix of uninjured and symptomatic populations. Thus, the effects of FOs on the treatment and/or prevention of overuse running injuries need to be investigated to guide future research and assist clinicians in their decision-making process. Main body: This scoping review aimed to evaluate the immediate and long-term effects of FOs on lower limb biomechanics, neuromuscular parameters, and pain and disability in symptomatic runners, and to identify factors that may influence the effects of FOs. Five databases (CINAHL, SPORTDiscus, MEDLINE, Embase, and Web of Science) were searched, resulting in 2536 studies. A total of 30 studies, published between 1992 and 2023 (730 symptomatic runners), were included following the removal of duplicates and the screening process. Wearing FOs while running is related to an immediate and a long-term decrease in pain and symptoms of overuse running injuries. Also, wearing FOs while running decreases eversion at the foot/ankle complex, leads to a more lateral plantar pressure at the heel and forefoot, and may change running motor control strategies. Finally, the effectiveness of FOs is influenced by its added features. Conclusions: This study provides recommendations for future research such as the need for standardized methods in describing FOs, considering participant characteristics such as foot morphology, and comparing different types of FOs. Also, this scoping review provides valuable insights for guiding the prescription and design of FOs, and suggests that integrating FOs into a comprehensive treatment plan may yield better results than standalone first-line treatments. Nonetheless, this scoping review highlights the need for future research to explore the optimal integration of FOs into injury-specific treatment plans. Key Points: Foot orthoses may redistribute loads onto non-injured structures, thereby resulting in an immediate decrease in pain and potentially contributing to the treatment of injuries. A rearfoot medial wedge decreases rearfoot and/or calcaneal eversion motion and moments in injured runners. A foot orthosis integrated into a comprehensive treatment plan may yield better results compared to standalone first-line treatments. The use of sham/flat insoles as a control/blinding condition is crucial in evaluating the effect of a foot orthosis. [ABSTRACT FROM AUTHOR]

Purpose: To determine whether postoperative neck pain in the first 4 weeks following multi-level posterior cervical fusion (PCF) with orthosis is equivalent to multi-level PCF without orthosis. Methods: Patients were randomly assigned in a 1:1 ratio to postoperative orthosis (CO) for 6 weeks or no orthosis (NO). Randomization was stratified by indication (traumatic vs. degenerative), and preoperative opioid use. A model of longitudinal regression for repeated measures was used. The two-sided 95% confidence interval (CI) was used to test equivalence. If the CI lay between the pre-determined margin of equivalence (−2.0 to + 2.0 pain score) the two groups were considered equivalent. A multiple imputation procedure was used to replace missing data. Results: Thirty-one patients were enrolled in each group. At baseline, the CO group had more neck pain (5.3 vs. 3.2, p = 0.013). The Four week post-operative neck pain intensity score was 4.6 ± 0.3 for the CO group vs. 4.9 ± 0.3 for the NO group. The 95% confidence interval (−1.2 to 0.6) was within the pre-determined equivalence margin. Neck Disability Index, quality-of-life scores, and arm pain were similar. Eleven patients in the CO group and 12 patients in the NO group had an adverse event. The CO group had reduced range of motion at 6 weeks. Conclusion: Pain scores over the first 4 weeks after surgery were equivalent for patients undergoing multi-level PCF treated with or without a cervical orthosis. Our findings do not support the routine use of a postoperative cervical orthosis for postoperative pain control. Clinical Trials Registration Number NCT04308122, April 22, 2020. [ABSTRACT FROM AUTHOR]

The first metatarsophalangeal joint (MTPJ) and the first ray are crucial in walking, particularly during propulsion. Limitation in this joint's sagittal plane motion, known as hallux limitus, can cause compensatory movements in other joints. Some studies assessed the impact of various foot orthoses designs on the foot biomechanics; however, a comprehensive understanding is lacking. This study compared the effects of two custom-made foot orthoses (CFOs) on the foot joint kinematics and kinetics in patients with structural hallux limitus (SHL). In this quasi-experimental study, 24 patients with hallux limitus were assessed in three conditions: (i) barefoot, (ii) shod with a cut-out custom foot orthosis (cut-out CFO), and (iii) shod with an anterior forefoot-stabilized element custom foot orthosis (AFSE CFO), fitted into a minimalist neoprene shoe. Multi-segment foot kinematics and kinetics were assessed during the stance phase of the gait. A decrease in ankle and midfoot inversion, as well as in ankle plantarflexion, was found in both orthotic conditions. Regarding the first MTPJ, a greater dorsiflexion was observed with the patient being barefoot compared to both of the conditions under study. From the current finding, it should be concluded that neither of the custom foot orthoses produced the predefined functional effects. [ABSTRACT FROM AUTHOR]

Previous research exploring the effects of tactile feedback in standing balance protocols may have generated results that misrepresent the modulatory capabilities of cutaneous afference on generating motor output responses. The neurosensory mechanism of textured foot orthoses to maximize the activation of cutaneous mechanoreceptors is through repetitive foot sole skin indentation. Thus, the purpose of this experimental protocol was to investigate muscular activity amplitude changes during the stance phase of gait, specifically when walking on level ground and when stepping onto a raised wedge, and while wearing textured foot orthoses compared to orthoses without texture. Twenty-one healthy young adults were fit to a standardized neutral running shoe and completed five level and wedged walking trials wearing both orthoses. Kinematic, kinetic and electromyography (EMG) data were recorded from eight lower limb muscles. The results of this study revealed EMG suppression of lower leg musculature during stance when walking in textured foot orthoses, and this was most pronounced when lower leg musculature is typically most active. The addition of texture in foot orthoses design, spanning the entire length of the foot sole, appears to be a clear mechanism to modulate neurosensory feedback with intent to suppress EMG of shank musculature during gait. [ABSTRACT FROM AUTHOR]

An Ankle-foot orthosis (AFO) is a structure that spans from the lower leg to the foot and controls ankle joint movement. It prevents or assists the human body's lower leg and foot in replicating a normal human gait. The purpose of AFO is to achieve a stable gait by controlling the musculoskeletal system adequately. The mechanical features of AFO stiffness will play an essential role in helping gait, if this stiffness is not matching to the patient's conditions, gait will decrease and knee joint motion will be compromised. In general, trimline cut were introduced in the AFO medial and lateral side to control the stiffness of orthosis. However, this will result in stress concentration in the ankle region and lead to failure of AFO. In this study first evaluate the effects of trimline cut in AFOs using finite element analysis with three geometrical shapes like circle, elliptical and slot were introduced on the dorsal side. The stress concentration and stiffness of AFOs in the ankle region were computed. The stiffness of the basic model and trimline cut AFO model were compared and found elliptical trimline cut model is optimum one. The experimental analysis was performed using 3D Printed AFOs and calculated stiffness. It was observed that finite element analysis results, stress concentration of trimline cut models were reduced maximum of 2 % with basic model (without trimline cut)., whereas, in the experimental study of 3D-Printed AFO of trimline cut model, stiffness were reduced around 16 % compared with basic models. This study clearly indicates that, geometrical shapes trimline cut influencing on stiffness of AFOs. It will give the insight's for orthosis designers to make custom design of AFOs in particularly foot drop conditions to optimized the stiffness of orthosis. [ABSTRACT FROM AUTHOR]

The purpose of this quasiexperimental study was to test the effects of wearing the NewGait rehabilitative device on walking abilities in individuals with foot drop. The study involved 16 participants with foot drops caused by stroke (11 participants), multiple sclerosis (one participant), and peripheral neuropathies (four individuals). During a single testing session, participants walked 12 m at their self‐selected speed in four experimental conditions: walking without any orthotic device; walking while wearing a regular plastic posterior leaf ankle foot orthosis (AFO); walking with the NewGait device assisting ankle dorsiflexion only; and walking with the NewGait device assisting the hip, knee, and ankle joint motions. Body motions during walking were recorded using a 3D system for motion analysis and analyzed with a set of spatiotemporal and kinematic parameters and a gait decomposition index. The gait decomposition index indicated sagittal interjoint coordination in the three joint pairs (hip–knee, knee–ankle, and hip–ankle) of the paretic (foot drop) leg during walking and was validated in a previous study. Overall, wearing all three orthotic devices improved the gait velocity, ankle dorsiflexion, and foot clearance compared to gait trials in which no assistive devices were used. However, wearing the AFO significantly restricted the plantarflexion range of motion and decreased interjoint coordination as measured by joint decomposition. In contrast, the NewGait device altered the ankle plantarflexion motions but also increased coordinated movement (reduced the decomposition) in most lower‐extremity joint pairs and conditions. Therefore, the NewGait rehabilitative device can be considered superior to a regular AFO in correcting gait deviations caused by foot drop. [ABSTRACT FROM AUTHOR]

Introduction Recovering from neuromuscular injuries or conditions can be a challenging journey that involves complex surgeries and extensive physical rehabilitation. During this process, individuals often rely on orthotic devices to support and enable movement of the affected limb. However, users have criticized current commercially available powered orthotic devices for their bulky and heavy design. To address these limitations, we developed a novel powered myoelectric elbow orthosis. Materials and Methods The orthosis incorporates 3 mechanisms: a solenoid brake, a Bowden cable-powered constant torque elbow mechanism, and an extension limiter. The device controller and battery are in a backpack to reduce the weight on the affected arm. We performed extensive calculations and testing to ensure that the orthosis could withstand at least 15 Nm of elbow torque. We developed a custom software effectively control the orthosis, enhancing its usability and functionality. A certified orthotist fitted a subject who had undergone a gracilis free functioning muscle transfer surgery with the device. We studied the subject under Mayo clinic IRB no. 20-006849 and obtained objective measurements to assess the orthosis's impact on upper extremity functionality during daily activities. Results The results are promising since the orthosis significantly improved elbow flexion range of motion by 40° and reduced compensatory movements at the shoulder (humerothoracic joint) by 50°. Additionally, the subject was able to perform tasks which were not possible before, such as carrying a basket with weights, highlighting the enhanced functionality provided by the orthosis. Conclusion In brief, by addressing the limitations of existing devices, this novel powered myoelectric elbow orthosis offers individuals with neuromuscular injuries/conditions improved quality of life. Further research will expand the patient population and control mechanisms. [ABSTRACT FROM AUTHOR]

The advancement in depth-sensor technology increased the potential for the clinical use of markerless three-dimensional motion analysis (3DMA); however, the accurate quantification of depth-sensor-based 3DMA on gait characteristics deviating from normal patterns is unclear. This study investigated the concurrent validity of the measurements of compensatory movements measured by depth-sensor-based 3DMA compared to those measured by marker-based 3DMA. We induced swing-phase compensatory movements due to insufficient toe clearance by restricting unilateral ankle and knee joint movements in healthy individuals. Thirty-two healthy young adults (nineteen males, aged 20.4   ±   2.0 years, height 164.4   ±   9.8 cm, weight 60.0   ±   9.3 kg [average ± standard deviation]) walked the 6 m walkway in slow speed, very slow speed, and knee–ankle–foot orthosis (KAFO; participants wore KAFOs on the right leg) conditions. Gait kinematics were measured with marker-based and depth-sensor-based 3DMA systems. The intraclass correlation coefficient (ICC3,1) was used to measure the relative agreement between depth-sensor-based and marker-based 3DMA and demonstrated good or moderate validity for swing-phase compensatory movement measurement. Additionally, the ICC2,1 measured absolute agreement between the systems and showed lower validity than the ICC3,1. The measurement errors for contralateral vaulting, trunk lateral flexion, hip hiking, swing-side hip abduction, and circumduction between instruments were 0.01 m, 1.30°, 1.99°, 2.37°, and 1.53°, respectively. Depth-sensor-based 3DMA is useful for determining swing-phase compensatory movements, although the possibility of missing a slight measurement error of 1–2° must be considered. [ABSTRACT FROM AUTHOR]

Introduction: Midfoot osteoarthritis (OA) is a painful and disabling condition. Arch contouring foot orthoses have been recommended for midfoot OA, yet there is no high‐quality evidence from randomised controlled trials to support their use. This clinical trial aims to evaluate the efficacy of arch contouring foot orthoses for midfoot OA. Methods: This will be a parallel‐group randomised controlled superiority trial. One‐hundred and forty community‐dwelling people with painful midfoot OA will be randomised to receive either arch contouring foot orthoses or flat sham inserts. Outcome measures will be obtained at baseline, 4, 8 and 12 weeks; the primary endpoint for assessing efficacy being 12 weeks. The primary outcome measure will be average midfoot pain whilst walking over the last 7 days on an 11‐point numerical rating scale. Secondary outcome measures include function (walking/standing subscale of the Manchester–Oxford Foot Questionnaire), participants' perception of overall treatment effect (self‐reported global rating of change on a 15‐point Likert scale), physical activity (Incidental and Planned Exercise Questionnaire), general health‐related quality of life (Short Form‐12 Version® 2.0), use of co‐interventions and adverse events. Discussion: This trial will evaluate the efficacy of arch contouring foot orthoses for relieving pain and improving function, physical activity and health‐related quality of life in people with midfoot OA. The findings will provide high‐quality evidence as to whether arch contouring foot orthoses are efficacious and will help to inform clinical guidelines about the use of foot orthoses for midfoot OA. Trial registration: Australian and New Zealand Clinical Trial Registry (ACTRN12623000953639). [ABSTRACT FROM AUTHOR]

Introduction: Foot pain can be a significant burden for patients. Custom foot orthoses (CFOs) have been a mainstay in podiatry treatment for foot pain management and improving foot function. However, little is known about podiatrists' experience of prescribing CFOs or patient experience of using foot orthoses (FOs), including CFOs, for foot pain. Methods: A focus group (FG) discussion with three FOs users (Female = 2 and Male = 1) was conducted in November 2022 within a private podiatry practice. This group represented non‐experts from the general local population of individuals with existing or previous foot pain who have personally experienced using either over‐the‐counter FOs or CFOs. An online FG discussion with five musculoskeletal (MSK) specialist podiatrists (Female = 2 and Male = 3) was also conducted in December 2022. This group represented podiatrists with specialist knowledge in foot biomechanics and clinical experience in CFO provision. The FG discussions were recorded and lasted 49 and 57 min respectively. Transcribed data was manually coded, and a thematic analysis was undertaken to identify patterns within the collected data. Results: The participants in the patient FG detailed mixed experiences of the prescription process and CFOs received, with reports of limited involvement/input in their prescription, the need for frequent adjustments and high costs. The impact on footwear choices, replicability and transferability of CFOs into different types of shoes and technologies to aid design were also highlighted. In the podiatrist FG, lack of confidence in design and manufacture processes, prescription form language, relationship and communication building with manufacturers, variability in the CFOs issued and the need for better student education in CFO provision emerged as key themes. Conclusion: Patients and podiatrists shared similar views on CFO provision, namely poor communication with manufacturers leading to dissatisfaction with the CFOs prescribed causing negative impacts on patient experiences. Podiatrists called for greater education at registration level to increase new graduate podiatrist knowledge in CFO design and manufacture and better collaboration with manufacturing companies. [ABSTRACT FROM AUTHOR]

Individuals with myelomeningocele (MMC) present with neurological and orthopaedic deficiencies, requiring orthoses during walking. Orthoses for counteracting dorsiflexion may restrict activities such as rising from a chair. How are sit-to-stand (STS) movements performed with ankle joint-restricted ankle-foot orthoses (AFO) and knee-ankle-foot orthoses with a free-articulated knee joint (KAFO-F)? Twenty-eight adults with MMC, mean age 25.5 years (standard deviation: 3.5 years), were divided into an AnkleFree group (no orthosis or a foot orthosis) and an AnkleRestrict group (AFOs or KAFO-Fs). Study participants performed the five times STS test (5STS) while their movements were simultaneously captured with a three-dimensional motion system. Centre of mass (CoM) trajectories and joint kinematics were analysed using statistical parametric mapping. The AnkleRestrict group performed the STS slower than the AnkleFree group, median 8.8 s (min, max: 6.9, 14.61 s) vs 15.0 s (min, max: 7.5, 32.2 s) (p = 0.002), displayed reduced ankle dorsiflexion (mean difference: 6°, p = 0.044) (74–81 % of the STS cycle), reduced knee extension (mean difference: 14°, p = 0.002) (17–41 % of the STS cycle), larger anterior pelvic tilt angle (average difference: 11°, p = 0.024) (12–24 % of the STS cycle), and larger trunk flexion angle (on average 4°, p = 0.029) (6–15 % of the STS cycle). The differences between the AnkleFree and AnkleRestrict groups in performing the STS seem consistent with the participants functional ambulation: community ambulation in the AnkleFree group, and household and nonfunctional ambulation with less hip muscle strength in the majority of the AnkleRestrict group. No differences in the 5STS CoM trajectories or the kinematics were found with respect to the AFO and KAFO-Fs groups. Because orthoses are constructed to enable walking, the environment needs to be adjusted for activities in daily living such as the STS movement. • Orthoses for walking require restricted ankle dorsiflexion in individuals with MMC. • A blocked ankle hampers forward movement altering sit-to-stand (STS) movements. • The effort required to perform STS in everyday activities should be acknowledged. • The findings highlight the importance of adjusting the environment with external support. [ABSTRACT FROM AUTHOR]

Exercises strengthening foot muscles and customized arch support insoles are recommended for improving foot posture in flexible flatfoot. However, it is not known what the effects of exercises and insoles on plantar force distribution obtained during walking at different speeds. Also, randomized controlled trials comparing the effects of exercises and insoles are limited. What are the effects of foot exercises, customized arch support insoles, and exercises plus insoles on foot posture, plantar force distribution, and balance in people with flexible flatfoot? Do exercises, insoles, and exercises plus insoles affect outcome measures differently? Forty-five people with flexible flatfoot were randomly divided into three groups and 40 of those completed the study. The exercise group performed tibialis posterior strengthening and short foot exercises three days a week for six weeks. The insole group used their customized arch support insoles for six weeks. The exercise plus insole group received both interventions for six weeks. The assessments were performed three times: before the interventions and at the 6th and 12th weeks. Outcome measures were (1) foot posture, (2) plantar force distribution in the following conditions: static standing, barefoot walking at different speeds, and walking immediately after the heel-rise test, and (3) balance. Foot posture improved in all groups, but insole was less effective than exercise and exercise plus insole (p<0.05). Plantar force variables obtained during standing and walking changed in all groups (p<0.05). The superiority of the interventions differed according to the plantar regions and walking speed conditions (p<0.05). Static balance improved in all groups, but limits of stability improved in the exercise plus insole and exercise groups (p<0.05). The superiority of the interventions differed according to the assessed parameter. The management of flexible flatfoot should be tailored based on the assessment results of each individual. • Exercises and exercises plus insoles were more effective than insoles for posture. • Exercises and exercises plus insoles improved dynamic balance, but insoles did not. • Exercises plus insoles can be used to provide plantar force lateralization. • Insoles can be used to decrease loading on the midfoot. [ABSTRACT FROM AUTHOR]

The effects of foot orthoses on lower limb biomechanics during walking have been studied extensively. However, the lack of knowledge regarding the effects of various foot orthoses models for the same population complicates model selection in clinical practice and research. Additionally, there is a critical need to enhance our ability to predict the outcomes of foot orthoses using clinical tests, such as the supination resistance test. What are the effects of two commonly prescribed types of FO (thin-flexible and medially wedged) on lower limb biomechanics during gait? Is there a correlation on these effects with the results of the supination resistance test? Twenty-three participants with flat feet were enrolled in this cross-sectional descriptive study. Participants underwent walking trials under three conditions: shod, thin-flexible FOs and medially wedged FOs. Midfoot, ankle, knee and hip angles, moments were calculated. Repeated measure ANOVAs were employed for within-group comparison across conditions. Correlations between the effects of FOs on foot and ankle angles/moments and supination resistance were determined using regression analyses using a statistical parametric mapping approach. Thin-flexible and medially wedged FOs reduced midfoot dorsiflexion angles and ankle inversion moments. Medially wedged FOs also decreased midfoot and ankle abduction angles, midfoot plantarflexion moments compared to thin-flexible FOs and shoes. Moderate to good correlations between the supination resistance test and the medially wedged FOs were observed for the frontal and transverse ankle angles and moments. Medially wedged FOs are more effective in modifying lower limb biomechanics during walking compared to thin-flexible FOs. Greater supination resistance was associated with more pronounced effects for medially wedged FOs on foot and ankle biomechanics. These findings hold promise for refining orthotic prescription strategies, potentially offering advantages to individuals with musculoskeletal disorders. • Medially wedged foot orthoses generated the greater biomechanical effects. • Foot orthoses primarily impacted the distal segments of the lower limb. • Moderate correlations were observed between SRT and the biomechanical effects. • The supination resistance test will help in the foot orthoses selection process. [ABSTRACT FROM AUTHOR]

The aim of this review was to evaluate the efficiency of using ankle foot orthosis (AFO) on the loads applied on the knee joint in the subjects with knee osteoarthritis (OA) based on available literature. A search was done in some data bases including Medline, PubMed, Cochrane central register of controlled trial (CCTR), Embase, and ISI web of knowledge. The key words selected by national library of medicine were selected in this study. Those included Ankle foot orthosis (AFO) in combination with knee osteoarthritis (OA). Based on the aforementioned key words, 25 papers were selected. Based on abstracts and titles, 9 papers were finalized. AFO reduces knee adduction moment, which is more than lateral wedge. Moreover, AFO is more comfortable than other interventions. Although use of AFO reduces knee adduction moment, its effect on pain and functional performance is still controversial. [ABSTRACT FROM AUTHOR]

An editorial is presented that focuses on advancements in technology-assisted rehabilitation, highlighting the growing need for effective rehabilitation solutions due to the increasing prevalence of disabilities and chronic diseases worldwide. It discusses the development and application of assistive technologies, such as prosthetics, orthoses, and wearable sensors, which aim to improve the quality of life for individuals with motor impairments.

Introduction: The C-Brace microprocessor stance and swing control orthosis was designed to overcome safety and functional limitations of traditional knee-ankle-foot orthoses (KAFOs) for individuals with lower limb paresis. However, a systematic comparison to established KAFO types has not been performed in a bigger sample. Methods: International multicenter, randomized, controlled, cross-over clinical trial. Legacy KAFO users at risk of falling were randomized to KAFO/C-Brace or C-Brace/KAFO use for three months with each orthosis. Primary outcome was balance assessed with the Berg Balance Scale (BBS). Secondary outcomes were falls, mobility, function, and quality of life. Results: Intention-to-treat analysis with 102 participants. With the C-Brace, the BBS improved by 3.3 ± 6.3 points (p < 0.0001). Significantly fewer participants presented BBS scores <40 indicative of increased fall risk (16 vs. 36, p = 0.018). Mean falls reduced from 4.0 ± 16.8 to 1.1 ± 3.3 (p = 0.002). Outcomes for function, mobility, and quality of life showed significant improvements with the C-Brace. Discussion: The improvements in fall risk and mobility can be attributed to the stumble recovery and controlled knee flexion during weight bearing of the C-Brace and have a positive impact on the quality of life of users. Conclusion: The C-Brace represents an option for KAFO users with increased fall risk and reduced mobility. IMPLICATIONS FOR REHABILITATION: When prescribing traditional knee-ankle-foot orthoses (KAFOs), their known limitations, such as limited function and mobility, and the requirement to walk with compensatory mechanisms, especially on non-level terrains, should be considered. For patients with compromised balance and increased risk of falling when using a traditional KAFO, a microprocessor stance and swing control orthosis (MP-SSCO) may be considered as an orthotic option to reduce their fall risk. For patients with mobility restrictions using a traditional KAFO, a MP-SSCO may be considered to improve function, mobility, reintegration into normal living, and quality of life. [ABSTRACT FROM AUTHOR]

Individuals with neuromuscular pathologies are often prescribed an ankle-foot orthosis (AFO) to improve their gait mechanics by decreasing pathological movements of the ankle and lower limb. AFOs can resist or assist excessive or absent muscular forces that lead to tripping, instability, and slow inefficient gait. However, selecting the appropriate AFO with mechanical characteristics, which limit pathological ankle motion in certain phases of the gait cycle while facilitating effective ankle movement during other phases, requires careful clinical decision-making. The aim of this study is to propose an explicit methodology for the adjustment of multi-function articulated AFOs in clinical settings. A secondary aim is to outline the evidence supporting this methodology and to identify gaps in the literature as potential areas for future research. An emerging class of AFO, the multi-function articulated AFO, offers features that permit more comprehensive, iterative, and reversible adjustments of AFO ankle alignment and resistance to ankle motion. However, no standard method exists for the application and optimization of these therapeutic devices in the clinical setting. Here we propose an evidence-guided methodology applicable to the adjustment of multi-function articulated AFOs in the clinical setting. Characteristic load-deflection curves are given to illustrate the idealized yet complex resistance-angle behavior of multi-function articulated AFOs. Research is cited to demonstrate how these mechanical characteristics can help mitigate specific pathologic ankle and knee kinematics and kinetics. Evidence is presented to support the effects of systematic adjustment of high resistance, alignable, articulated AFOs to address many typical pathomechanical patterns observed in individuals with neuromuscular disorders. The published evidence supporting most decision points of the algorithm is presented with identified gaps in the evidence. In addition, two hypothetical case examples are given to illustrate the application of the method in optimizing multi-function articulated AFOs for treating specific gait pathomechanics. This method is proposed as an evidence-guided systematic approach for the adjustment of multi-function articulated AFOs. It utilizes observed gait deviations mapped to specific changes in AFO alignment and resistance settings as a clinical tool in orthotic treatment for individuals with complex neuromuscular gait disorders. [ABSTRACT FROM AUTHOR]

Background: Clubfoot management according to the Ponseti method, including 4–5 years of bilateral foot abduction bracing to prevent relapse, is widely accepted as gold standard. Adherence to bracing is often low, despite non-adherence being associated with poor outcomes. Objectives: This systematic scoping review aimed to identify and synthesize factors associated with brace adherence and non-adherence in the Ponseti method, to identify strategies shown to improve adherence, and to provide a clinically meaningful synthesis of available evidence. Methods: This scoping review utilized systematic search and formal guidance on conduct and reporting. Medline, SCOPUS, Informit, EmCare, CINAHL, and PEDro databases were searched for peer-reviewed primary research reporting factors associated with brace adherence or non-adherence during Ponseti management. Factors were identified, then grouped using inductive then deductive methods and reported in a narrative synthesis. Results: A total of 413 studies were identified and 42 were included in the review: 31 quantitative and 11 qualitative, generally of low quality. Meta-analysis was not feasible. Factors associated with non-adherence were identified more often than with adherence, and findings for both were inconsistent. Fifty-three factors were investigated, with conflicting findings common. No studies evaluating strategies to improve brace adherence were identified. Conclusions: Available evidence does not indicate that any one factor or set of factors is consistently associated with adherence or non-adherence to bracing in Ponseti clubfoot management, and so clinically meaningful factors are proposed. Adequately powered longitudinal studies of adherence to bracing are required. Mixed methods approaches would help to inform and evaluate strategies to improve adherence, particularly those routinely recommended in clinical practice. [ABSTRACT FROM AUTHOR]

People with Charcot-Marie-Tooth (CMT) disease often undergo foot and ankle surgery, as foot deformities are common and cause a degree of functional limitations impairing quality of life. Surgical approaches are variable and there are no evidence-based guidelines. A multidisciplinary approach involving neurology, physical therapy and orthopaedic surgery is ideal to provide guidance on when to refer for surgical opinion and when to intervene. This review outlines the range of foot deformities associated with CMT, their clinical assessment, and their conservative and surgical and postoperative management. [ABSTRACT FROM AUTHOR]

En bloc resection is required for treatment of intermediate-grade talar tumors with extraosseous extension (Enneking stage 3) and malignant talar tumors without intra-articular invasion (Enneking stages IA and IIA). After resection, reconstruction options include tibiocalcaneal fusion, frozen autograft, and talar prosthesis; however, a talar prosthesis is preferable because it preserves ankle range of motion, does not cause leg length discrepancy, and is associated with good long-term outcomes. To the best of our knowledge, en bloc resection and reconstruction of a malignant talar tumor has not been previously reported in detail. We report a detailed surgical technique for en bloc resection of a malignant talar bone tumor using combined anterior and lateral approaches followed by reconstruction using a talar prosthesis. [ABSTRACT FROM AUTHOR]

Purpose: Symptomatic flexible pes planus (SFPP) can cause pain and discomfort when walking or engaging in sportive activities in children and adolescents. SFPP can be treated conservatively with foot orthoses, such as the University of California Berkeley Laboratory (UCBL) foot orthosis, which can improve foot function and reduce pain. Kinesio Tape (KT) has also been used as an adjunct to foot orthoses in the treatment of pes planus. This study aims to compare the effectiveness of the UCBL foot orthosis with and without KT in the treatment of SFPP among amateur juvenile and adolescent athletes. Methods: Fifty patients with SFPP were included in the study. In 27 patients UCBL foot orthosis with KT (group 1) was used whereas in 23 UCBL (group 2) was preferred only. The patients were evaluated with AOFAS and radiological measurements. Results: The mean follow-up period was 28.6 ± 4.3(26) months. At the final follow-up AOFAS of group 1 was significantly higher than group 2. In group 2, 12 patients (%52,17) had pressure sores that caused superficial dermabrasion. Lateral TFMAs and talocalcaneal angle in group 1 was significantly better than group 2. Conclusions: This study attempted to determine if using KT with the UCBL foot orthosis was beneficial to the treatment of SFPP compared to simply wearing the orthosis. Our results suggest that KT is effective in reducing pronation and improving the AOFAS score. The use of UCBL with KT seems to be preferable in children and adolescents with SFPP since it is associated with a lower rate of complication, a higher degree of patient compliance and faster improvement in the radiological and clinical findings, compared to the use of the UCBL orthosis alone. [ABSTRACT FROM AUTHOR]

Purpose: Congenital accessory navicular bone (ANB) is a common variant in the foot and is prone to cause several clinical symptoms. Wearing custom-made foot orthosis is considered a desirable option; however, there is limited evidence of its effectiveness. This study aims to report the mid-term effect of foot orthosis for symptomatic pediatric ANBs. Methods: School-age children with symptomatic ANBs combined with flexible flatfoot in the authors' institute were recruited and got custom-made foot orthosis treatment. They were followed up over 4 years. The general characteristics of these children were collected before treatment, including age, gender, and body mass index (BMI). The indicators of foot symptoms, including frequency and location of pain, visual analogue scale (VAS), arch index (AI), and hind foot valgus angle (HVA), were measured during pretreatment and at the last follow-up. Results: Twenty-seven children were recruited for this study. After 4 years of custom-made foot orthosis treatment, significant improvements showed in pain frequency, VAS, AI, and HVA (P < 0.001). Type II ANBs showed a higher pain index pretreatment (P < 0.001) and reduced after treatment (P < 0.001). Conclusion: Mid-term effect of custom-made foot orthosis is inspiring in clinical symptoms of pediatric congenital ANBs combined with flexible flatfoot and may be an optional nonoperative treatment. [ABSTRACT FROM AUTHOR]

Background: Footwear, orthoses, and insoles have been shown to influence balance in older adults; however, it remains unclear which features, singular or in combination, are considered optimal. The aim of this scoping review was to identify and synthesise the current evidence regarding how footwear, orthoses, and insoles influence balance in older adults. Four electronic databases (MEDLINE, CINAHL, Embase, and AMED) were searched from inception to October 2023. Key terms such as "shoe*," "orthoses," "postural balance" and "older people" were employed in the search strategy. Studies meeting the following criteria were included: (i) participants had a minimum age ≥60 years, and were free of any neurological, musculoskeletal, and cardiovascular diseases; (ii) an active intervention consisting of footwear, foot orthoses, or insoles was evaluated; and (iii) at least one objective outcome measure of balance was reported. Summary: A total of 56 studies from 17 different countries were included. Three study designs were utilised (cross-sectional study, n = 44; randomised parallel group, n = 6; cohort study n = 6). The duration of studies varied considerably, with 41 studies evaluating immediate effects, 14 evaluating effects from 3 days to 12 weeks, and 1 study having a duration of 6 months. Seventeen different interventions were evaluated, including/consisting of textured insoles (n = 12), heel elevation (n = 8), non-specific standardised footwear and changes in sole thickness or hardness (n = 7 each), sole geometry or rocker soles, contoured or custom insoles and high collar height (n = 6 each), insole thickness or hardness and vibrating insoles (n = 5 each), outsole tread (n = 4), minimalist footwear and slippers (n = 3 each), balance-enhancing shoes, footwear fit, socks, and ankle-foot orthoses (n = 2 each), and eversion insoles, heel cups, and unstable footwear (n = 1 each). Twenty-three different outcomes were assessed, and postural sway was the most common (n = 20), followed by temporo-spatial gait parameters (n = 17). There was uncertainty regarding intervention effectiveness. Overall, features such as secure fixation, a textured insole, a medium-to-hard density midsole and a higher ankle collar, in isolation, were able to positively impact balance. Conversely, footwear with an elevated heel height and the use of socks and slippers impaired balance. Key Messages: There is a substantial body of literature exploring the effects of footwear, orthoses, and insoles on balance in older adults. However, considerable uncertainty exists regarding the efficacy of these interventions due to variability in methodological approaches. Further high-quality research is necessary to determine whether a singular intervention or a combination of interventions is most effective for enhancing balance in older adults. [ABSTRACT FROM AUTHOR]

Introduction: Nearly, a quarter of older adults suffer from frequent foot pain, impacting their quality of life. While proper footwear can alleviate this, design issues often hinder regular use. This study evaluated novel therapeutic footwear, designed for aesthetics and custom fit, to reduce foot pain. We hypothesized that older adults would experience less foot pain and favor the new footwear over their own. Methods: This 12-week crossover randomized controlled trial evaluated the effectiveness of OrthoFeet therapeutic footwear on reducing foot pain in older adults (n = 50, age = 65 ± 5, 18% male) with moderate to severe pain. Participants were assigned to either the AB or BA sequence. In AB, they wore OrthoFeet shoes for 6 weeks and then their own shoes for another 6 weeks; BA followed the reverse order. Pain and function were measured using the Foot Function Index. Acceptability was assessed through a technology acceptance model (TAM) questionnaire. Data collected at baseline, six, and 12 weeks were analyzed using t tests, χ2 tests, and generalized linear model. Results: Compared to participants' own shoes, OrthoFeet shoes significantly reduced foot pain and disability. Notable improvements were observed in "foot pain at its worst," "foot pain at the end of the day," "overall pain score," and "overall Foot Function Index score," all showing statistically significant reductions (p < 0.050). Participants reported high adherence to wearing the OrthoFeet shoes, averaging 8 h per day and 5.8 days per week. TAM scores favored OrthoFeet shoes over participants' own shoes in terms of ease of use, perceived benefit, and intention to recommend. Significant differences were noted in components representing perceived joint pain relief (p < 0.001, χ2 = 21.228) and the intention of use as determined by the likelihood of recommending the shoes to a friend with a similar condition (p < 0.001, χ2 = 29.465). Additionally, a majority of participants valued the appearance of the shoes, with 66% prioritizing shoe appearance and 96% finding the study shoes more stylish than their previous ones. Conclusion: This study underscores the significance of design and custom fit in promoting continuous wear for effective foot pain reduction in older adults. More research is needed on the intervention's long-term impacts. [ABSTRACT FROM AUTHOR]

Rheumatoid arthritis causes progressive joint destruction in the long term, causing a deterioration of the foot and ankle. A clinical practice guideline has been created with the main objective of providing recommendations in the field of podiatry for the conservative management of rheumatoid arthritis. Thus, healthcare professionals involved in foot care of adults with rheumatoid arthritis will be able to follow practical recommendations. A clinical practice guideline was created including a group of experts (podiatrists, rheumatologists, nurses, an orthopaedic surgeon, a physiotherapist, an occupational therapist and patient with rheumatoid arthritis). Methodological experts using GRADE were tasked with systematically reviewing the available scientific evidence and developing the information which serves as a basis for the expert group to make recommendations. Key findings include the efficacy of chiropody in alleviating hyperkeratotic lesions and improving short-term pain and functionality. Notably, custom and standardized foot orthoses demonstrated significant benefits in reducing foot pain, enhancing physical function, and improving life quality. Therapeutic footwear was identified as crucial for pain reduction and mobility improvement, emphasizing the necessity for custom-made options tailored to individual patient needs. Surgical interventions were recommended for cases which were non-responsive to conservative treatments, aimed at preserving foot functionality and reducing pain. Moreover, self-care strategies and education were underscored as essential components for promoting patient independence and health maintenance. A series of recommendations have been created which will help professionals and patients to manage podiatric pathologies derived from rheumatoid arthritis. [ABSTRACT FROM AUTHOR]

Injuries involving ankle stability and range of motion are among the most frequent in athletes and in the general population. In response, this study aimed to assess the immediate effects of toe separators on dynamic stability and ankle range of motion in healthy young individuals. Among the 68 eligible participants, 50 healthy and active subjects completed all trials. The impact of the intervention was evaluated using the Weight Bearing Lunge Test and Y-Test. The control condition performed the tests without toe separators, while the experimental condition performed the tests with toe separators. All participants performed both conditions with a wash-out period of at least 7 days between trials. Statistical analysis revealed no significant differences in dynamic balance (p > 0.05) and range of motion (p > 0.05) between the two conditions. Additionally, no asymmetries were detected between the lower limbs in both tests (p > 0.05). The results of this pilot study indicate that using toe separators does not have an immediate effect on ankle range of motion and dynamic balance in young, healthy individuals. Future research should consider evaluating intervention programs of longer duration and exploring different populations. [ABSTRACT FROM AUTHOR]

Copyright of Rehabilitation / Rehabilitacija is the property of University Rehabilitation Institute, Republic of Slovenia and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

This presents an innovative approach to treat diabetic foot ulcers (DFU) by leveraging Internet of Things (IoT) technology. Through a comprehensive data analysis system, DFU progress can be monitored in real time, allowing for timely intervention and improved healing outcomes. The system uses IoT devices to capture images of ulcers, identify the stage of the disease, and provide important insights into the severity of the ulcer. These images are displayed on an LCD screen and sent over the IoT network for analysis. Additionally, the system sends email notifications to healthcare providers to keep them updated on the patient's status and allow them to quickly adjust treatment plans. This continuous monitoring allows healthcare professionals to intervene quickly when needed, improving patient care and reducing strain on healthcare resources. This IoT-based approach represents a significant advance in DFU management, providing personalized treatment plans based on real-time data analysis and enabling better outcomes for patients with diabetic foot ulcers. [ABSTRACT FROM AUTHOR]

Background: For children with Osteogenesis Imperfecta (OI), a rare genetic bone disease, walking can be difficult to carry out due to a combination of bone fragility and deformity, muscle weakness, joint hypermobility, and pain. Bisphosphonate treatment has facilitated more children being able to walk, but for many, foot and ankle hypermobility is a limiting factor. Current evidence on foot orthoses in children with OI is sparse. This study aimed to evaluate gait characteristics in children with OI walking barefoot as compared to walking with foot orthoses. Methods: Twenty-three children with OI and hypermobility (mean age 8.3 ± 3.0 years) were included in this cross-sectional study. Children conducted three-dimensional gait analysis barefoot, and with foot orthoses and appropriate foot wear (stable yet light-weight), respectively. Walking speed, step length, lower limb kinematics and kinetics were collected. Differences in gait characteristics between test conditions were evaluated using paired sample t-tests. Results: When walking with foot orthoses, the external foot progression angle was reduced, peak ankle dorsiflexion angle increased, and peak plantarflexion moment increased as compared to barefoot. No difference was found in walking speed between test conditions, however, children with OI walked with longer steps with foot orthoses as compared to barefoot. Conclusion: The observed gait alterations suggest that foot orthoses, aiming to support the foot and ankle joint, contributed to reduced overall foot rotation as measured by external foot progression, increased peak plantarflexion moment, and increased step length. In a wider perspective, the ability to walk provides the opportunity to be physically active, and thereby increase skeletal loading and prevent fractures, thus, foot orthoses may be an important treatment option to consider in children with OI. Level of evidence: III. [ABSTRACT FROM AUTHOR]

The exercises of plantar foot muscles may have beneficial effects on the performance of the lower extremity muscles. The aim of this study was to compare two methods of foot muscle strengthening: direct short foot muscle exercises and indirect activation through training in minimalist footwear in regard to influence on lactate threshold velocity in long-distance runners. 55 recreational runners aged 21–45 years took part in that study. They were randomly divided into 2 groups: Group 1 (n = 25) with short foot muscle exercises, and Group 2 (n = 30) with training in minimalist shoes. The progressive running test was performed to determine heart rate (HR) and running velocity corresponding to lactate threshold (VLT). Two-way ANOVA was used to determine the significance of the differences regarding the evaluated variables. After the 8-week training program, higher values of VLT were observed in both groups. This change was significant only in Group 1 (p < 0.05). In Group 2, the higher value was noted but the changes were non-significant. Strengthening of the short foot muscles may improve lactate threshold velocity which is connected with running performance. Considering the obtained results, it is worth contemplating the implementation of these methods in the training of long-distance runners. [ABSTRACT FROM AUTHOR]

Background: Falling is highly prevalent among older adults and has serious impact. Age-induced mobility impairments, such as gait modifications, are strongly associated with increased fall risk. Among fall prevention interventions, those including exercises are most effective. However, there is an urgent need to further improve these kinds of interventions. Strengthening the plantar intrinsic foot muscles might benefit mobility in older adults, which may contribute to the reduction of fall risk. The aim of this paper is to provide a protocol to investigate the effect of a plantar intrinsic foot muscle strengthening training versus no training on gait and intrinsic foot muscle function in older adults who are involved in a functional exercise program. Methods: For this assessor-blinded RCT, older adults (> 65 years) are recruited who are involved in a group-based functional exercise program. Eligibility criteria include: being able to ambulate 10 m barefoot without using a walking aid and reporting to have either fear of falling or experienced a fall in the previous 12 months or have difficulties with mobility, gait, or balance in daily life. Participants are randomly assigned to an intervention and a control group. The intervention group follows a 12-week plantar intrinsic foot muscle strengthening training. The training consists of isolated and functional foot exercises to be performed 5 times a week, each session lasting approximately 20 min. The training is supervised once a week and the intensity gradually increases based on the participant's progression. Both groups keep a diary to report physical activities, fall incidents and movement related discomfort. The control condition is limited to keeping this diary. Data are collected at baseline and post-intervention. The trial outcomes are the between group differences in the mean change from baseline in maximum gait speed (primary outcome measure), capacity and strength of the plantar intrinsic foot muscles, foot and ankle biomechanics during gait, and various other fall risk-related variables. ANCOVA's are used to analyze the trial outcomes. Discussion: The results of this RCT will offer recommendations, related to plantar intrinsic foot muscle strengthening, to existing fall preventive exercise programs. Trial registration: The trial is registered in the United States National Library of Medicine through ClinicalTrials.gov (NCT05531136, 07/26/2022). [ABSTRACT FROM AUTHOR]

Introduction: A concern expressed by the clinical community is that the constraint of motion provided by an ankle foot orthosis (AFO) may lead the user to become dependent on its stiffness, leading to learned non-use. To examine this, we hypothesized that using an experimental AFO-footwear combination (exAFO-FC) that constrains ankle motion during walking would result in reduced soleus and tibialis anterior EMG compared to free (exAFOFC) and control (no AFO, footwear only) conditions. Method: A total of 14 healthy subjects walked at their preferred speed (1.34 ± 0.09 m·s-1) for 15min, in three conditions, namely, control, free, and stop. Results: During the stance phase of walking in the stop condition, ipsilateral soleus integrated EMG (iEMG) declined linearly, culminating in a 32.1% reduction compared to the control condition in the final 5 min interval of the protocol. In contrast, ipsilateral tibialis anterior iEMG declined in a variable fashion culminating in an 11.2% reduction compared to control in the final 5 min interval. During the swing phase, the tibialis anterior iEMG increased by 6.6% compared to the control condition during the final 5 min interval. The contralateral soleus and tibialis anterior exhibited increased iEMG in the stop condition. Discussion: An AFO-FC functions as a biomechanical motion control device that influences the neural control system and alters the output of muscles experiencing constraints of motion. [ABSTRACT FROM AUTHOR]

Introduction: Many military service members and civilians suffer from lower extremity trauma. Despite recent advancements in lower limb bracing technology, it remains unclear whether these newer advanced braces offer improved comfort and functionality compared to conventional options. The IDEO (Intrepid Dynamic Exoskeletal Orthosis), a type of "advanced" orthosis was developed to assist in maintaining high functional performance in patients who have experienced high-energy lower extremity trauma and underwent limb salvage surgeries. Methods: A cross-sector multi-site initiative was completed to study the efficacy of advanced ankle foot orthoses (AFO) for lower limb trauma and injury compared to a conventional AFO. Following fitting, training, and accommodation, the subjects were assessed in each AFO system for mobility, self-reported function, safety and pain, and preference. Results: They preferred the advanced over the conventional AFO and the mobility and exertion perception improved with the advanced AFO with no difference in pain or overall health status scores. Discussion: Thus, an advanced AFO is an option for trauma affecting the lower limb. Long-term studies are required to better understand the accommodation and learning process of using an advanced AFO. [ABSTRACT FROM AUTHOR]

The aim of this study was to shed light on a crucial issue through a comprehensive evaluation of the cost-effectiveness and cost-utility of a cutting-edge web-based foot–ankle therapeutic exercise program (SOPeD) designed for treating modifiable risk factors for ulcer prevention in individuals with diabetes-related peripheral neuropathy (DPN). In this randomized controlled trial, 62 participants diagnosed with DPN were assigned to the SOPeD software or received usual care for diabetic foot. Primary outcomes were DPN symptoms and severity, foot pain and function, and quality-adjusted life years (QALYs). Between-group comparisons provided 95% confidence intervals. The study also calculated incremental cost-effectiveness and cost-utility ratios (ICERs), analyzed direct costs from a healthcare perspective, and performed a sensitivity analysis to assess uncertainty. The web-based intervention effectively reduced foot pain, improved foot function and showed favorable cost-effectiveness, with ICERs ranging from (USD) $5.37–$148.71 per improvement in different outcomes. There is a high likelihood of cost-effectiveness for improving DPN symptoms and severity, foot pain, and function, even when the minimum willingness-to-pay threshold was set at $1000.00 USD. However, the intervention did not prove to be cost-effective in terms of QALYs. This study reveals SOPeD's effectiveness in reducing foot pain, improving foot function, and demonstrating cost-effectiveness in enhancing functional and clinical outcomes. SOPeD stands as a potential game-changer for modifiable risk factors for ulcers, with our findings indicating a feasible and balanced integration into public health systems. Further studies and considerations are vital for informed decisions to stakeholders and the successful implementation of this preventive program on a larger scale. Trial Registration: ClinicalTrials.gov, NCT04011267. Registered on 8 July 2019. [ABSTRACT FROM AUTHOR]

AbstractPurposeMethodsResultsConclusions\nIMPLICATIONS FOR REHABILITATIONWearable robotic devices are currently being developed to improve upper limb function for individuals with hemiparesis after stroke. Incorporating the views of clinicians during the development of new technologies can help ensure that end products meet clinical needs and can be adopted for patient care.In this cross-sectional mixed-methods study, an anonymous online survey was used to gather clinicians’ perceptions of a wearable robotic hand orthosis for post-stroke hemiparesis. Participants were asked about their clinical experience and provided feedback on the prototype device after viewing a video.154 participants completed the survey. Only 18.8% had previous experience with robotic technology. The majority of participants (64.9%) reported that they would use the device for both rehabilitative and assistive purposes. Participants perceived that the device could be used in supervised clinical settings with all phases of stroke. Participants also indicated a need for insurance coverage and quick setup time.Engaging clinicians early in the design process can help guide the development of wearable robotic devices. Both rehabilitative and assistive functions are valued by clinicians and should be considered during device development. Future research is needed to understand a broader set of stakeholders’ perspectives on utility and design.Clinicians valued both assistive and rehabilitative uses of a wearable robotic hand orthosis designed for individuals with hemiparesis after stroke.Wearable robotic hand devices should have the capacity to engage in functional, real-world activities for both assistive and rehabilitative purposes.Pragmatic factors, such as set-up and training time, must be balanced with device complexity to enable implementation in clinical settings.Stakeholders, such as clinicians, play an important role in identifying design priorities for wearable robotic devices to ensure these devices can meet the needs of end-users.Clinicians valued both assistive and rehabilitative uses of a wearable robotic hand orthosis designed for individuals with hemiparesis after stroke.Wearable robotic hand devices should have the capacity to engage in functional, real-world activities for both assistive and rehabilitative purposes.Pragmatic factors, such as set-up and training time, must be balanced with device complexity to enable implementation in clinical settings.Stakeholders, such as clinicians, play an important role in identifying design priorities for wearable robotic devices to ensure these devices can meet the needs of end-users. [ABSTRACT FROM AUTHOR]

Objective: The aim of the study is to evaluate the effect of minimally invasive ultrasound-guided fascial release and a foot orthoses with first metatarsal head cutout on the biomechanics of the medial longitudinal arch of the foot in cadaveric specimens. Design: A cross-sectional study was designed (20 body donors). Anthropometric measurements of the foot, foot posture index, and the windlass test and force were measured in different conditions: unloaded, loaded position, with foot orthoses, after a 25% plantar fascia release and after a 50% release. Results: For the anthropometric measurements of the foot, differences were found in foot length (P = 0.009), arch height (P < 0.001), and midfoot width (P = 0.019) when comparing the unloaded versus foot orthoses condition. When foot orthoses were compared with 25% plantar fascial release, differences were found in foot length (P = 0.014) and arch height (P < 0.001). In the comparison with 50% plantar fascial release, differences were found in the arch height (P < 0.001). A significant interaction between foot orthoses condition and grades was found in the arch height during the windlass test (P = 0.021). Conclusions: The results indicate that the presence of foot orthoses leads to a significant increase in arch height compared with other conditions. Furthermore, when plantar fascia release is performed, the arch does not exhibit any signs of collapse. [ABSTRACT FROM AUTHOR]

Smart shoes have ushered in a new era of personalised health monitoring and assistive technologies. Smart shoes leverage technologies such as Bluetooth for data collection and wireless transmission, and incorporate features such as GPS tracking, obstacle detection, and fitness tracking. As the 2010s unfolded, the smart shoe landscape diversified and advanced rapidly, driven by sensor technology enhancements and smartphones' ubiquity. Shoes have begun incorporating accelerometers, gyroscopes, and pressure sensors, significantly improving the accuracy of data collection and enabling functionalities such as gait analysis. The healthcare sector has recognised the potential of smart shoes, leading to innovations such as shoes designed to monitor diabetic foot ulcers, track rehabilitation progress, and detect falls among older people, thus expanding their application beyond fitness into medical monitoring. This article provides an overview of the current state of smart shoe technology, highlighting the integration of advanced sensors for health monitoring, energy harvesting, assistive features for the visually impaired, and deep learning for data analysis. This study discusses the potential of smart footwear in medical applications, particularly for patients with diabetes, and the ongoing research in this field. Current footwear challenges are also discussed, including complex construction, poor fit, comfort, and high cost. [ABSTRACT FROM AUTHOR]

The use of custom-made foot orthoses has been associated with numerous benefits, such as decreased impact accelerations. However, it is not known whether this effect could be due to better customisation. The present study analysed the effects of the first generation of a microwavable prefabricated self-customised foot orthosis vs. a prefabricated standard one on impact accelerations throughout a prolonged run. Thirty runners performed two tests of 30-min running on a treadmill, each one with an orthosis condition. Impact acceleration variables of tibia and head were recorded every 5 min. Microwavable self-customised foot orthosis increased the following variables in the first instants compared to the prefabricated standard one: tibial peak (min1: 6.5 (1.8) vs. 6.0 (1.7) g, P =.009, min5: 6.6 (1.7) vs. 6.2 (1.7) g, P =.035), tibial magnitude (min1: 8.3 (2.6) vs. 7.7 (2.4) g, P =.030, min5: 8.5 (2.6) vs. 7.9 (2.5) g, P =.026) and shock attenuation (min1: 61.4 (16.8) vs. 56.3 (16.3)%, P =.014, min5: 62.0 (15.5) vs. 57.2 (15.3)%, P =.040), and tibial rate throughout the entire run (504.3 (229.7) vs. 422.7 (212.9) g/s, P =.006). However, it was more stable throughout 30-min running (P <.05). These results show that the shape customisation entailed by the thermoformable material does not provide impact acceleration improvements. [ABSTRACT FROM AUTHOR]

Introduction: The biomechanical factors influencing metatarsalgia etiology have been well documented; however, patient characteristics of individuals suffering from this condition and the effectiveness of foot orthosis therapy remain unknown. Objectives: The objectives of this study were 1) to characterize the metatarsalgia profile of patients seeking treatment in a footwear and orthotic clinic, and 2) to explore the association between comfort and pain in patients with metatarsalgia who were treated with foot orthosis intervention. Study Design: This study is a retrospective chart review. Methods: Metatarsalgia assessment and follow-up data (case group n = 2137) were extracted from a research database (control group n = 82,822) from patients visiting a private foot care clinic. A clinical assessment was performed by a Canadian-certified pedorthist, and footwear recommendations and bilateral custom foot orthoses were provided to all patients. Feet were casted using a three-dimensional volumetric laser scanner. Orthoses (80% of cases) were manufactured from a direct mill polypropylene shell; additional rearfoot, forefoot postings, and/or metatarsal support was added according to the patient’s personalized treatment plan. Results: Eighty-one percent (81%) of metatarsalgia patients reported symptom improvement following custom orthoses treatment. The average pain reduction from the orthotic intervention was 58.55%. The average self-reported comfort scores were 7.7 ± 2.2/10 at follow-up. Compared with our control group, patients with metatarsalgia were more frequently self-identified as females, over 51 years of age, and the condition was observed in a higher prevalence of high cavus feet. Conclusions: Our results suggest that a pes cavus foot posture is a biomechanical risk factor to the development of metatarsalgia. Custom foot orthoses that are manufactured according to a patient’s personalized treatment plan are an effective conservative treatment option for pain reduction in patients suffering from metatarsalgia. [ABSTRACT FROM AUTHOR]

Introduction: Plantar orthoses are widely used in the prevention and treatment of foot and lower-limb disorders. Plantar orthoses can generally be classified as prefabricated devices; however, many prefabricated devices can be customized. Customized orthotic insoles are usually prescribed with the goal of improving foot function. However, evidence that customized orthoses modify foot function in a predictable and dose-responsive manner is limited, and there is currently no consensus on how orthoses should be prescribed. Consequently, a high variability in orthotic prescriptions by physicians is observed. The aim of this study is to propose an orthotic insole prescription form (INSPECTOR) that is clear, easy, and replicable by all professionals involved. Methods: All known clinical assessments and tests with high sensitivity and specificity indices, positive and negative predictive value, positive likelihood ratio, and negative likelihood ratio were included in the form. Result: The result of this study is a form that guides the clinician step by step toward an appropriate and correct foot prescription. Conclusions: INSPECTOR has several potential advantages; it is a step-by-step guide for the physician, starting with basic tasks such as anamnesis, functional prognosis, and prescription of the foot orthosis, and ending with the choice of the target area for the foot orthosis and the material to be used. The module lists scientifically validated and internationally recognized tests, making it understandable by professionals in all countries. Finally, it can reduce the differences between prescribed and finished orthopedic insoles, thus avoiding wasting money or material on reconstruction or construction [ABSTRACT FROM AUTHOR]

To investigate the immediate effects of plastic ankle-foot orthosis (AFO) on locomotor performance in patients with stroke and determine how such effects might undergo alteration when distinct plantarflexor (PF) module subtypes are considered. Cross-sectional study. Two university hospitals. Fifty-two patients with stroke and 21 of those without stroke (N=73). Not applicable. Motor modules were identified through non-negative matrix factorization, and participants were classified into 3 groups: independent-normal-timing, independent-altered-timing, and merged PF modules. To assess the effects of the AFO, gait measurements reflecting locomotor performance were obtained with and without the presence of the plastic AFO for each group. The independent-altered-timing group had increased paretic propulsion, greater non-paretic step length, and faster walking speed after the administration of the plastic AFO; however, these significant changes were not observed in the independent-normal-timing and merged PF module groups. Notably, patients in the independent-normal-timing and merged PF module groups exhibited longer paretic stance times. This study suggests that the immediate effects of plastic AFO depend on the PF module subtype. These findings can potentially guide clinical decision-making regarding AFO selection for stroke rehabilitation in patients with diverse gait control characteristics. [ABSTRACT FROM AUTHOR]

The article presents analysis of mechanical properties of specimens fabricated by fused deposition modelling (FDM). The four of considered materials are the well-known 3D printing filaments i.e., polylactide (PLA), Nylon 12 (PA12), acrylonitrile butadiene styrene (ABS), polyethylene terephthalate glycol (PET-G). The other four materials considered are carbon-fiber composites not described in the literature, i.e. polylactide with carbon fiber (PLACF), Nylon 12 with carbon fiber (PA12-CF), acrylonitrile butadiene styrene with carbon fiber (ABS-CF), polyethylene terephthalate glycol with carbon fiber (PETG-CF). The paper describes how the specimens were designed, printed, subjected to static tensile tests and static bending tests, and examined using microscopy. The obtained data uses to select the optimum material for the rapid manufacturing of lower limb orthoses. Carbon composites were found to have better mechanical properties of their base material, but the fabrication of composite samples is much more time consuming, for the reason that the manufacturing process is not stable. [ABSTRACT FROM AUTHOR]

Introduction: Subtalar Arthroereisis (STA) is a surgical intervention for pediatric flexible flatfoot (PFF), primarily targeting hindfoot alignment by limiting excessive subtalar eversion. However, its effects on forefoot parameters remain underexplored. This study aims to investigate radiological changes following STA in pediatric patients. Materials and Methods: A retrospective analysis was conducted on consecutive patients treated with STA for PFF. First ray-related angles, including the Hallux Valgus Angle (HVA) and the Intermetatarsal Angle (IMA), alongside hindfoot radiological parameters such as the Meary, Calcaneal Pitch, and Costa Bartani angles, were assessed. Subgroup analysis by gender was performed, and correlations between demographic and preoperative radiological parameters were examined. Results: Forty-one patients (81 feet) with an average age of 11.6 years were included, with a mean follow-up duration of 6.4 months. No significant differences were observed in first ray-related angles pre-and postoperatively, with the mean IMA changing from 7.97° to 7.18° and the mean HV angles changing from 9.51° to 8.66°. Noteworthy improvements were seen in flat foot angles, including the Meary, Calcaneal Pitch, and Costa Bartani angles, postoperatively. The age subgroup analysis revealed similar trends in IMA and HVA changes between Group A (who underwent surgery before peak growth) and Group B (who underwent surgery after peak growth). Higher preoperative angles tended to improve, while lower preoperative IMAs and HVAs tended to worsen postoperatively, all remaining within normal ranges. Conclusion: STA showed positive radiological outcomes for PFF treatment, while negligible changes in first ray-related angles were observed. The age subgroup analysis indicated similar trends regardless of operation timing. Higher preoperative angles tended to improve, while lower preoperative angles tended to worsen postoperatively, despite all falling within non-pathological ranges. Further research is warranted to confirm this correlation. [ABSTRACT FROM AUTHOR]

The accurate perception of external environment information through the robot foot is crucial for the mobile robot to evaluate its ability to traverse terrain. Adequate foot-end contact signals can provide robust support for robot motion control and decision-making processes. The shape and uncertain rotation of the wheel-legged robot foot end represent a significant challenge to sensing the robot foot-end contact state, which current foot-end sensing schemes cannot solve. This paper presents a sensing method for the tire stress field of wheel-legged robots. A finite element analysis was conducted to study the deformation characteristics of the foot-end tire under force. Based on this analysis, a heuristic contact position estimator was designed that utilizes symmetrical deformation characteristics. Strain sensors, arranged in an array, extract the deformation information on the inner surface of the tire at a frequency of 200 Hz. The contact position estimator reduces the dimensionality of the data and fits the eigenvalues to the estimated contact position. Using support vector regression, the force estimator utilizes the estimated contact position and sensor signal to estimate the normal reaction force, designated as FZ. The sensing system is capable of detecting the contact position on the wheel circumference (with a root mean square error of 1.150°), as well as the normal force of 160 N on the Z axis (with a root mean square error of 6.04%). To validate the efficacy of the sensor detection method, a series of randomized and repeated experiments were conducted on a self-constructed test platform. This novel approach offers a promising avenue for perceiving contact states in wheel-legged robots. [ABSTRACT FROM AUTHOR]

Conventional passive ankle foot orthoses (AFOs) have not seen substantial advances or functional improvements for decades, failing to meet the demands of many stakeholders, especially the pediatric population with neurological disorders. Our objective is to develop the first comfortable and unobtrusive powered AFO for children with cerebral palsy (CP), the DE-AFO. CP is the most diagnosed neuromotor disorder in the pediatric population. The standard of care for ankle control dysfunction associated with CP, however, is an unmechanized, bulky, and uncomfortable L-shaped conventional AFO. These passive orthoses constrain the ankle's motion and often cause muscle disuse atrophy, skin damage, and adverse neural adaptations. While powered orthoses could enhance natural ankle motion, their reliance on bulky, noisy, and rigid actuators like DC motors limits their acceptability. Our innovation, the DE-AFO, emerged from insights gathered during customer discovery interviews with 185 stakeholders within the AFO ecosystem as part of the NSF I-Corps program. The DE-AFO is a biomimetic robot that employs artificial muscles made from an electro-active polymer called dielectric elastomers (DEs) to assist ankle movements in the sagittal planes. It incorporates a gait phase detection controller to synchronize the artificial muscles with natural gait cycles, mimicking the function of natural ankle muscles. This device is the first of its kind to utilize lightweight, compact, soft, and silent artificial muscles that contract longitudinally, addressing traditional actuated AFOs' limitations by enhancing the orthosis's natural feel, comfort, and acceptability. In this paper, we outline our design approach and describe the three main components of the DE-AFO: the artificial muscle technology, the finite state machine (the gait phase detection system), and its mechanical structure. To verify the feasibility of our design, we theoretically calculated if DE-AFO can provide the necessary ankle moment assistance for children with CP—aligning with moments observed in typically developing children. To this end, we calculated the ankle moment deficit in a child with CP when compared with the normative moment of seven typically developing children. Our results demonstrated that the DE-AFO can provide meaningful ankle moment assistance, providing up to 69% and 100% of the required assistive force during the pre-swing phase and swing period of gait, respectively. [ABSTRACT FROM AUTHOR]

Purpose: There is no consensus on the optimal treatment of bony mallet finger in the paediatric population due to a lack of studies in children. The Ishiguro technique is simple and less invasive, and treatment with K-wire fixation seems to provide better results for extension lag in bony mallet finger according to the literature. A retrospective cross-sectional study with long-term follow-up was performed to evaluate the functional and clinical outcomes of this method in children. Preoperative and intraoperative predictors of outcome were investigated. Methods: From June to December 2022, we evaluated 95 children who underwent extension K-wire block from 2002 to 2012. Eighty-four children were included (mean age 14.8 ± 1.68 years) for a mean long-term follow-up of 11.6 ± 2.3 (8–16) years. Clinical and radiographic features were assessed. Pain and functional outcomes were assessed using Crawford criteria, range of motion (ROM) at the distal interphalangeal joint (DIPJ), loss of extension, and VAS scale. Univariate and multivariate regressions were used to assess which variables might predict the worst outcomes at long-term follow-up. Results: Bone union and pain relief were always achieved. There were no complaints of potential growth impairment or nail deformity. 82.1% of patients showed excellent and good results. Fifteen patients had fair results. Conclusions: Although there are currently no significant differences between surgery and orthosis in adults, the Ishiguro technique is more effective in children when it comes to outcomes in the treatment of mallet fingers. A high percentage of excellent and good results were achieved, and no epiphyseal damage or nail deformity was reported. A strong and significant correlation was found between the worst outcomes and either delayed treatment time or excessive flexion angle. [ABSTRACT FROM AUTHOR]