Search

Questo testo si rivolge a chiunque sia interessato ad approfondire la riflessione sulla chimica vista nella sua accezione più ampia e profonda: espressione culturale e sistema di pensiero sul mondo materiale. Nato dalla collaborazione tra esperti di diversi campi disciplinari e professionali (docenti e ricercatori in didattica chimica, pedagogia, epistemologia, didattica generale e insegnanti della scuola secondaria di secondo grado) per presentare e analizzare gli aspetti fondamentali della disciplina chimica e del suo insegnamento, ha l’obiettivo di promuovere una didattica mirata all’apprendimento significativo. Si propone pertanto come strumento al servizio di chi si avvicina all’insegnamento della chimica attraverso i nuovi percorsi di formazione per insegnanti, ma anche di chi desidera rivedere, in un’ottica diversa, gli insegnamenti già in atto nei diversi gradi di formazione, dalla primaria all’università.

The main goal of this research was to develop a mathematical model for a co-current spray drying-assisted encapsulation of natural extracts from grape pomace and citrus fruit peels, aiming to predict both structural features and the retention of their bioactive constituents. Model validation was performed using a laboratory scale spray dryer, analyzing the product in terms of moisture content, solids and total phenolic compounds recovery yields. The comparison between experimental and simulated results revealed that the model properly described the system. A slight effect of air inlet temperature was observed on the phenolic content of produced particles. For this reason, a kinetic law, which allows predicting the degradation of phenols was proposed and validated. These results highlighted the potential of spray-drying technology to efficiently encapsulate high-added value compounds with good preservation of their bioactive compounds, offering the possibility to decrease food waste issues while improving industry economic benefits.

Plant proteins are attracting much interest as an ingredient in the food sector due to their functional properties. These products are, in fact, widely studied to improve the quality of food products and to develop new types of bio packaging. This paper aims to study and investigate the potential of adding vegetable proteins (specifically soybean and sunflower) to improve the physicochemical stability of hazelnut pastes which are widely used in the food sector as a product itself or as an ingredient for many products, such as pastry, confectionery, and ice cream. To investigate the effect of protein incorporation, hazelnut paste samples were stored under temperature accelerated conditions to simulate at least 10 months of shelf-life under normal storage conditions, and periodically analyzed for water activity, lipid oxidation, tocopherols content and oil separation. The study showed promising results for both added proteins, especially in terms of the physical stabilization of the product.

Since fresh meat is often subject to several degradation reactions that decrease its safety and quality until it is considered unacceptable, the release of bioactive compounds into meat products may be a good option to slow down oxidation and extend its shelf-life by a few days. Therefore, this study aimed to test the application on fresh pork burgers of a PLA-PHB film coated with two different coating formulations (methylcellulose, MC and chitosan, CT), both containing a commercial olive leaf extract OL, to evaluate their effect on meat quality preservation. Samples were tested at 0, 2, 5, 7, 9, 12, and 14 days after packing for microbial, chemical, and sensory evaluations. Except for the chitosan-only formulation, all tested formulations (MC, MC+OL and CT+OL) adhered well to the PLA-PHB base without the use of specific treatments. Meat packed with the different coatings maintained a slightly brighter red colour than the control samples and, as a result, deteriorated more slowly. In the evaluation of lipid oxidation, the CT+OL coating showed lower mean values of mg MDA/kg meat, which were significantly different from the other samples, especially on the 7th and 9th day of storage. Moreover, the CT+OL coating showed a slight slowdown in Enterobacteriaceae growth, revealing promising results in maintaining the meat quality longer.

Frailty is an aging related condition, which has been defined as a state of enhanced vulnerability to stressors, leading to a limited capacity to meet homeostatic demands. Cognitive impairment is also frequent in older people, often accompanying frailty. Age is the main independent risk factor for both frailty and cognitive impairment, and compelling evidence suggests that similar age-associated mechanisms could underlie both clinical conditions. Accordingly, it has been suggested that frailty and cognitive impairment share common pathways, and some authors proposed “cognitive frailty” as a single complex phenotype. Nevertheless, so far, no clear common underlying pathways have been discovered for both conditions. microRNAs (miRNAs) have emerged as key fine-tuning regulators in most physiological processes, as well as pathological conditions. Importantly, miRNAs have been proposed as both peripheral biomarkers and potential molecular factors involved in physiological and pathological aging. In this review, we discuss the evidence linking changes of selected miRNAs expression with frailty and cognitive impairment. Overall, miR-92a-5p and miR-532-5p, as well as other miRNAs implicated in pathological aging, should be investigated as potential biomarkers (and putative molecular effectors) of cognitive frailty.

Peripheral blood mononuclear cells (PBMCs) derived from a healthy 40-year-old female were successfully transformed into induced pluripotent stem cells (iPSCs) by using the integration-free CytoTune-iPS Sendai Reprogramming method. The resulting iPSCs line exhibits a normal karyotype, expresses stemness markers and displays the differentiation capacity into the three germ layers. This human iPSCs line can be used as healthy control in disease modelling studies.

Novel and complementary experimental models are required for investigating the molecular mechanisms underlying the resistance to the available therapies of patients with major depression (Treatment-Resistant Depression, TRD) that occurs in at least one third of patients and need to be deeply investigated. Here, we have established a patient-specific disease model for TRD by reprogramming peripheral blood mononuclear cells (PBMCs) from two TRD patients into induced pluripotent stem cells (iPSCs), using non-integrating Sendai virus. These lines show the typical morphology of pluripotent cells, express pluripotency markers and displayed in vitro differentiation potential toward cells of the three embryonic germ layers.

Aims: The emerging role of coronary computed tomography angiography (CCTA) as a non-invasive tool for atherosclerosis evaluation is supported by data reporting a good correlation between CCTA and intravascular ultrasound (IVUS) for plaque volume quantification. Aim of the present study was to evaluate whether a last generation CT-scanner may improve coronary plaque volume assessment using IVUS as standard-of-reference. Methods and results: From a registry of 1915 consecutive, all-comers, patients who underwent a clinically indicated IVUS evaluation we enrolled 59 patients who underwent CCTA with a 64-slice CT (Group 1) and 59 patients who underwent CCTA with whole-heart coverage CT scanner (Group 2). Patients who underwent CCTA with unfavourable heart rhythm were not excluded from the analysis. Image quality (4-point Likert scale) focused on plaque analysis was evaluated. Plaque volume quantification by CCTA was compared to IVUS. No difference in clinical characteristics was found between Group 1 and Group 2. Plaque volume quantification by CCTA was considered not feasible in 11 plaques of Group 1 and in 4 plaques of Group 2 (P = 0.09). Higher correlation for plaque volume quantification by CCTA vs. IVUS was demonstrated in Group 2 when compared with Group 1 (r = 0.9888 vs. 0.9499; P < 0.0001). The Bland-Altman analysis showed plaque volume overestimation by CCTA of 11.9 mm3 in Group 1 and 4 mm2 in Group 2 (P < 0.001). Effective radiation dose of CCTA was significantly lower in Group 2 vs. Group 1 (2.7 ± 0.9 vs. 8.1 ± 3.6 mSv, respectively; P < 0.001). Conclusions: CCTA using a new scanner generation showed to be an accurate non-invasive tool to assess and quantify coronary plaque volume.

Aims: Coronary CT angiography (CCTA) is an accurate non-invasive tool for the evaluation of coronary artery bypass graft (CABG). However, inability to sustain a long breath-hold, high heart rate (HR) and atrial fibrillation may affect image quality. Moreover, radiation exposure is still a matter of some concern. A scanner combining 0.23-mm spatial resolution, new iterative reconstruction and fast gantry rotation time has been recently introduced in the clinical field. The aims of our study were to evaluate interpretability, radiation exposure and diagnostic accuracy of CCTA performed with the latest generation of cardiac-CT scanners compared to invasive coronary angiography (ICA) in the assessment of bypass grafts, and non-grafted and post-anastomotic native coronary arteries. Methods and results: We prospectively enrolled 300 patients undergoing clinically indicated CCTA with a 16-cm z-axis coverage, 256-detector rows, and 0.28-sec gantry rotation time scanner. Coronary artery and graft interpretability, image quality and effective dose (ED) were assessed in all patients and diagnostic accuracy was evaluated in a subgroup of 100 patients who underwent ICA. Mean HR during the scan was 69.6 ± 10.8. Sinus rhythm was present in 118 patients with HR < 75 bpm and in 112 patients with HR ≥ 75 bpm, while 70 patients had atrial fibrillation. CABG interpretability was 100%. Compared to ICA, CCTA was able to correctly detecting occlusions or significant stenoses of all CABG segments. Overall interpretability of native coronary segments was 95.6%. Sensitivity, specificity, positive predictive value, negative predictive value and accuracy of coronary arteries were 98.3%, 97.4%, 93.1%, 99.3% and 96.5%, respectively. The diagnostic accuracy in a patient based analysis was 95.2%. Mean ED was 3.14 ± 1.7 mSv. Conclusions: The novel whole-heart coverage CT scanner allows to evaluating CABG and native coronary arteries with excellent interpretability and low radiation exposure even

BACKGROUND: Cardiac magnetic resonance (CMR) is the standard of reference for myocardial fibrosis detection by late gadolinium enhancement. Cardiac computed tomography (CCT) is emerging as a promising alternative. The Evidence for a comPrehensive evaLUation of left ventRicle dysfnctIon By a whole-heart coverage cardiac compUted tomography Scanner study will assess the feasibility and diagnostic accuracy of a comprehensive functional and anatomical cardiac evaluation with CCT as compared with CMR and invasive coronary angiography as standard of reference. METHODS: Consecutive patients with a newly diagnosed left ventricle (LV) dysfunction (left ventricular ejection fraction <50%) and a clinical indication to CMR will be screened. Exclusion criteria will be contraindications to contrast agents and impaired renal function. CCT will be performed per protocol within 10 days from CMR. A total of 100 patients will be enrolled within 24 months. We will evaluate with CCT volume and ejection fraction of the LV and right ventricle, presence, extent and pattern of delayed enhancement and cardiac venous system. Moreover, presence and degree of coronary stenoses will be evaluated among patients undergoing invasive coronary angiography in the 6 months following CCT. RESULTS: The primary study endpoints will be: first, to assess the diagnostic performance of CCT vs. CMR to detect the delayed enhancement in a territory-based and patient-based analysis; second, to assess the agreement between CCT and CMR in the discrimination between ischemic vs. nonischemic delayed enhancement patters in a territory-based analysis; third, to assess the correlation between CCT and CMR for LV and right ventricle end-diastolic and end-systolic volumes and ejection fraction measurements. CONCLUSION: The Evidence for a comPrehensive evaLUation of left ventRicle dysfnctIon By a whole-heart coverage cardiac compUted tomography Scanner study will assess the diagnostic performance of CCT using the latest

The effect of autohydrolysis (AH) temperature (165 °C, 195 °C, 225 °C) on the structure, purity, and recovery yield of the cellulose residue isolated after additional alkaline and bleaching steps from wheat straw, was investigated. The processes were quantified for mass yields in the different steps and for antioxidants and sugars release during AH. AH at 195 °C allowed for the highest cellulose residue yield (83.5%) with purity (∼70%) and structure similar to the other residues. FTIR and XRD analyses showed straw cellulose (SC) with a type II polymorphism and crystallinity index increasing with AH temperature. SC obtained at the end of the entire fractionation process (SC-195 °C) starting from AH residue-195 °C was tested as a reinforcing agent in different percentage (0, 2 and 5% by weight) in poly(butylene adipate-co-terephthalate) (PBAT) films. The Young’s modulus of the films increased by ∼17% with 5 wt% cellulose, while tensile strength and elongation at break decreased.

The effect of autohydrolysis (AH) temperature (165 °C, 195 °C, 225 °C) on the structure, purity, and recovery yield of the cellulose residue isolated after additional alkaline and bleaching steps from wheat straw, was investigated. The processes were quantified for mass yields in the different steps and for antioxidants and sugars release during AH. AH at 195 °C allowed for the highest cellulose residue yield (83.5%) with purity (∼70%) and structure similar to the other residues. FTIR and XRD analyses showed straw cellulose (SC) with a type II polymorphism and crystallinity index increasing with AH temperature. SC obtained at the end of the entire fractionation process (SC-195 °C) starting from AH residue-195 °C was tested as a reinforcing agent in different percentage (0, 2 and 5% by weight) in poly(butylene adipate-co-terephthalate) (PBAT) films. The Young's modulus of the films increased by ∼17% with 5 wt% cellulose, while tensile strength and elongation at break decreased.

Rationale and Objectives: To evaluate image quality, coronary interpretability and radiation exposure of coronary CT angiography (CCTA)performed in patients with atrial fibrillation (AF)with the latest scanner generation, comparing two different technical approaches. A new scanner that combines a 0.23 mm spatial resolution, a new generation of iterative reconstruction, fast gantry rotation time and the intracycle motion-correction algorithm to improve the temporal resolution was recently introduced in the clinical field. Materials and Methods: We enrolled 105 consecutive patients with chronic AF who performed CCTA with a whole-heart coverage high-definition CT scanner (16-cm z-axis coverage with 256 detector rows, 0.28 s gantry rotation time). Five of them were excluded for impaired renal function. Patients were randomized between a double acquisition protocol (50 patients, group 1)or a single acquisition protocol (50 patients, group 2). The image quality, coronary segment interpretability and effective dose (ED)of CCTA were assessed. Results: The mean HR during the scan was 85.6±21 bpm in group 1 vs. 83.7±23 bpm in Group 2, respectively (p < ns). In group 2, overall image quality was high and comparable with that of group 1 (Likert scale =3.2 ± 1.4 vs. 3.3 ± 1.2, p = ns, in group 1 and 2, respectively). Coronary interpretability was high and similar between the two groups (97.5% and 97.1% in group 1 and 2, p = ns, respectively). Mean ED was significantly higher in group 1 than in group 2 (5.3 ± 1.8 mSv vs. 2.7 ± 0.7 mSv, p < 0.001). Conclusion: The novel whole-heart coverage CT scanner allows to perform CCTA with a single-acquisition protocol with high image quality and low radiation exposure in AF patients.

Aims: To evaluate image quality, interpretability, diagnostic accuracy and radiation exposure of coronary CT angiography (CCTA) performed with a new scanner equipped with 0.23-mm spatial resolution, new generation iterative reconstruction, 0.28-second gantry rotation time and intra-cycle motion-correction algorithm in consecutive patients with coronary stents, including those with high heart rate (HR) and atrial fibrillation (AF). Materials and methods: We enrolled 100 consecutive patients (85 males, mean age 65 ± 10 years) with previous coronary stent implantation scheduled for clinically indicated non-emergent invasive coronary angiography (ICA). Image quality, coronary interpretability and diagnostic accuracy vs. ICA were evaluated and the effective dose (ED) was recorded. Results: Mean HR during the scan was 67 ± 13 bpm. Twenty-six patients had >65 bpm HR during scanning and 13 patients had AF. Overall, image quality was high (Likert = 3.2 ± 0.9). Stent interpretability was 95.8% (184/192 stents). Among 192 stented segments, CCTA correctly identified 22 out of 24 with >50% in-stent restenosis (ISR) (sensitivity 92%). In a stent-based analysis, specificity, positive and negative predictive values and diagnostic accuracy for ISR detection were 91%, 99%, 60% and 91%, respectively. In a patient-based analysis, CCTA diagnostic accuracy was 85%. Overall, mean ED of CCTA was 2.4 ± 1.2 mSv. Conclusions: A whole-organ CT scanner was able to evaluate coronary stents with good diagnostic performance and low radiation exposure, also in presence of unfavorable HR and heart rhythm. Translational aspect: The present study is the first to evaluate the CCTA capability of detecting in-stent restenosis in consecutive patients, including those with high HR and AF, using a recent scanner generation that combines improved spatial and temporal resolution with wide coverage. Using the whole-organ high-definition CT scanner we obtained high quality images of coronary stents with g

Converging clinical and preclinical evidence demonstrates that depressive phenotypes are associated with synaptic dysfunction and dendritic simplification in cortico-limbic glutamatergic areas. On the other hand, the rapid antidepressant effect of acute ketamine is consistently reported to occur together with the rescue of dendritic atrophy and reduction of spine number induced by chronic stress in the hippocampus and prefrontal cortex of animal models of depression. Nevertheless, the molecular mechanisms underlying these morphological alterations remain largely unknown. Here, we found that miR-9-5p levels were selectively reduced in the hippocampus of rats vulnerable to Chronic Mild Stress (CMS), while acute subanesthetic ketamine restored its levels to basal condition in just 24h; miR-9-5p expression inversely correlated with the anhedonic phenotype. A decrease of miR-9-5p was reproduced in an in vitro model of stress, based on primary hippocampal neurons incubated with the stress hormone corticosterone. In both CMS animals and primary neurons, decreased miR-9-5p levels were associated with dendritic simplification, while treatment with ketamine completely rescued the changes. In vitro modulation of miR-9-5p expression showed a direct role of miR-9-5p in regulating dendritic length and spine density in mature primary hippocampal neurons. Among the putative target genes tested, Rest and Sirt1 were validated as biological targets in primary neuronal cultures. Moreover, in line with miR-9-5p changes, REST protein expression levels were remarkably increased in both CMS vulnerable animals and corticosterone-treated neurons, while ketamine completely abolished this alteration. Finally, the shortening of dendritic length in corticosterone-treated neurons was shown to be partly rescued by miR-9-5p overexpression and dependent on REST protein expression. Overall, our data unveiled the functional role of miR-9-5p in the remodeling of dendritic arbor induced by stress/cortic

Thermochemical and fractionation processes are promising ways for energy valorization and recovery of biomass and waste. An example is given by the application of a lignocellulosic fractionation process to recover both antioxidant phenolic compounds and cellulose from wheat straw, where a first hydrolysis step is carried out as a novel and green auto-hydrolysis process instead of conventional mild acid hydrolysis. Regarding this, the development of kinetic and reactor models that can represent the autohydrolysis process is crucial to exploit the potential of the agricultural residues (e.g., wheat straw). Several mathematical models were investigated, but the more suitable models for optimization purposes seem to be those based on a non-isothermal kinetic model. However, these models have several shortcomings. For instance, in the autohydrolysis process for the recovery of cellulose and lignin from by-products, the heating and cooling phases are not taken into account. Hence, from the point of view of energy optimization, closely linked also to economical optimization, this aspect becomes extremely important. Therefore, the aim of this work was to briefly present and comment, similarly to review work, the severity factor model and the kinetic model already investigated in the scientific literature in order to enable their comparison with the newly developed method in the current work in terms of different key performance indicators (e.g., cellulose recovery or sugar release). Specifically, our model includes new equations that consider both heating and cooling phases during autohydrolysis of wheat straw, as well as the isothermal step. In this way, it could be possible to use the obtained kinetic parameters not only for a specific case but also for different situations involving a wide range of operating conditions.

Background: Recent studies demonstrated a significant improvement in the diagnostic performance of coronary CT angiography (CCTA) for the evaluation of in-stent restenosis (ISR). However, coronary stent assessment is still challenging, especially because of beam-hardening artifacts due to metallic stent struts and high atherosclerotic burden of non-stented segments. Adenosine-stress myocardial perfusion assessed by CT (CTP) recently demonstrated to be a feasible and accurate tool for evaluating the functional significance of coronary stenoses in patients with suspected coronary artery disease (CAD). Yet, scarce data are available on the performance of CTP in patients with previous stent implantation. Aim of the study: We aim to assess the diagnostic performance of CCTA alone, CTP alone and CCTA plus CTP performed with a new scanner generation using quantitative invasive coronary angiography (ICA) and invasive fractional flow reserve (FFR) as standard of reference. Methods: We will enroll 300 consecutive patients with previous stent implantation, referred for non-emergent and clinically indicated invasive coronary angiography (ICA) due to suspected ISR or progression of CAD in native coronary segments. All patients will be subjected to stress myocardial CTP and a rest CCTA. The first 150 subjects will undergo static CTP scan, while the following 150 patients will undergo dynamic CTP scan. Measurement of invasive FFR will be performed during ICA when clinically indicated. Results: The primary study end points will be: 1) assessment of the diagnostic performance (diagnostic rate, sensitivity, specificity, positive predictive value, negative predictive value and diagnostic accuracy) of CCTA, CTP, combined CCTA-CTP and concordant CCTA-CTP vs. ICA as standard of reference in a territory-based and patient-based analysis; 2) assessment of sensitivity, specificity, positive predictive value, negative predictive value and diagnostic accuracy of CCTA, CTP, combined CCTA-CTP an

Food industry must guarantee food safety and seek sustainable solutions for increasing shelf life and decreasing food waste. Bio-based smart packaging is a potential option, where sustainability and real-time monitoring of food quality are combined assuring health safety and providing economic and environmental benefits. In this context, bio-based refers not only to packaging materials that are from renewable sources and biodegradable, but also to the sensor elements. The scope of this review is to explore the state-of-the-art of bio-based polymers used as food contact materials and to highlight the potential of natural compounds for sensing chemical and physical changes of the environment to monitor the food quality. Finally, different sustainability aspects of the bio-based materials are discussed.

Objectives: The goal of this study was to assess the diagnostic performance of coronary computed tomography angiography (CTA) alone, adenosine-stress myocardial perfusion assessed by computed tomography (CTP) alone, and coronary CTA + CTP by using a 16-cm Z-axis coverage scanner versus invasive coronary angiography (ICA) and fractional flow reserve (FFR) as the clinical standard. Background: Diagnostic performance of coronary CTA for in-stent restenosis detection is still challenging. Recently, CTP showed additional diagnostic power over coronary CTA in patients with suspected coronary artery disease. However, few data are available on CTP performance in patients with previous stent implantation. Methods: Consecutive stable patients with previous coronary stenting referred for ICA were enrolled. All patients underwent stress myocardial CTP and rest CTP + coronary CTA. Invasive FFR was performed during ICA when clinically indicated. The diagnostic rate and diagnostic accuracy of coronary CTA, CTP, and coronary CTA + CTP were evaluated in stent-, territory-, and patient-based analyses. Results: In the 150 enrolled patients (132 men; mean age 65.1 ± 9.1 years), the CTP diagnostic rate was significantly higher than that of coronary CTA in all analyses (territory based [96.7% vs. 91.1%; p < 0.0001] and patient based [96% vs. 68%; p < 0.0001]). When ICA was used as gold standard, CTP diagnostic accuracy was significantly higher than that of coronary CTA in all analyses (territory based [92.1% vs. 85.5%, p < 0.03] and patient based [86.7% vs. 76.7%, p < 0.03]). The concordant coronary CTA + CTP assessment exhibited the highest diagnostic accuracy values versus ICA (95.8% in the territory-based analysis). The diagnostic accuracy of CTP was significantly higher than that of coronary CTA (75% vs. 30.5%; p < 0.001). The radiation exposure of coronary CTA + CTP was 4.15 ± 1.5 mSv. Conclusions: In patients with coronary stents, CTP significantly improved the diagn

The valorisation and the reuse of agricultural residue and food waste are gaining more attention in the last years as are directly related to environmental sustainability. For this reason, the aim of this study is to evaluate the influence of autohydrolysis operating conditions for a high yield recovery of sugars, soluble fiber and antioxidants from grape skins. In this work, an experimental campaign using a lab-scale batch autohydrolysis reactor is scheduled based on statistical methods to assess the influence of some process variables (like water to skins solids ratio or working temperaure) on some selected key performance indicators (KPIs), like sugars, sugar degradation products, phenolic compounds, antioxidant compounds and fiber recovery. As a comparison, different agricultural residue, like wheat straw, are considered. Entering in the details, the volume of the recovered autohydrolysis liquid fraction is measured and analyzed to calculate the release yield of both total solids and specific components, including antioxidant activity according different in vitro assays tests such as and ABTS assay. Therefore, this work presents an innovate autohydrolysis process for the valorization of waste grape skins for the production of added-value compounds through a potentially green technology.

Processing of grapes and other fruits in the wine and fruit juice industry generates huge amounts of solid residues (pomace) which, if not properly disposed of, can represent an environmental concern due to their high organic load. To avoid landfill and incineration, different alternative uses are available and commonly applied. Among these, the most common are for feeding, composting and biogas production which are, anyway, not proper valorisation strategies. On the other hand, fruit pomaces are by-products still rich in bioactive components, such as dietary fibre and phenolic/antioxidant compounds. Considering the positive health potentials of such components, together with their potential technological role (as texturing and antioxidant ingredients), fruit pomaces may then be simply dried and milled to get functional food ingredients. It is known however, that incorporation of high levels of raw fibres into food products often causes unpleasant textures and colours. Furthermore, phenolic compounds only partially occur in fruit pomace as free compounds, while they are bound to cell wall (fibre) fractions. Enzymatic hydrolysis processes could be applied as a pre-drying treatment of fruit pomace to improve the functional properties of the final powders in terms of fibre composition and antioxidants release. In this study different fruit skins separated from different pomaces (grape, apple and blackcurrant) were submitted to an enzymatic treatment before drying. Two different commercial pectinase preparations were used: One already used in the apple juice processing for the treatment of apple and blackcurrant skins, the other currently used in the winemaking process for the treatment of grape skins. Untreated and treated dried skins were analysed for structural carbohydrates, soluble and insoluble dietary fibre, free glucose and xylose, water holding capacity, water solubility and total phenolics and antioxidants release. The results were highly variable depending on

Food industry must guarantee food safety and seek sustainable solutions for increasing shelf life and decreasing food waste. Bio-based smart packaging is a potential option, where sustainability and real-time monitoring of food quality are combined assuring health safety and providing economic and environmental benefits. In this context, bio-based refers not only to packaging materials that are from renewable sources and biodegradable, but also to the sensor elements. The scope of this review is to explore the state-of-the-art of bio-based polymers used as food contact materials and to highlight the potential of natural compounds for sensing chemical and physical changes of the environment to monitor the food quality. Finally, different sustainability aspects of the bio-based materials are discussed.