Search

Laser plasma accelerators (LPAs) enable the generation of intense and short proton bunches on a micrometre scale, thus offering new experimental capabilities to research fields such as ultra-high dose rate radiobiology or material analysis. Being spectrally broadband, laser-accelerated proton bunches allow for tailored volumetric dose deposition in a sample via single bunches to excite or probe specific sample properties. The rising number of such experiments indicates a need for diagnostics providing spatially resolved characterization of dose distributions with volumes of approximately 1 cm ${}^3$ for single proton bunches to allow for fast online feedback. Here we present the scintillator-based miniSCIDOM detector for online single-bunch tomographic reconstruction of dose distributions in volumes of up to approximately 1 cm ${}^3$ . The detector achieves a spatial resolution below 500 $\unicode{x3bc}$ m and a sensitivity of 100 mGy. The detector performance is tested at a proton therapy cyclotron and an LPA proton source. The experiments’ primary focus is the characterization of the scintillator’s ionization quenching behaviour.

Laser–plasma accelerated (LPA) proton bunches are now applied for research fields ranging from ultra-high-dose-rate radiobiology to material science. Yet, the capabilities to characterize the spectrally and angularly broad LPA bunches lag behind the rapidly evolving applications. The OCTOPOD translates the angularly resolved spectral characterization of LPA proton bunches into the spatially resolved detection of the volumetric dose distribution deposited in a liquid scintillator. Up to 24 multi-pinhole arrays record projections of the scintillation light distribution and allow for tomographic reconstruction of the volumetric dose deposition pattern, from which proton spectra may be retrieved. Applying the OCTOPOD at a cyclotron, we show the reliable retrieval of various spatial dose deposition patterns and detector sensitivity over a broad dose range. Moreover, the OCTOPOD was installed at an LPA proton source, providing real-time data on proton acceleration performance and attesting the system optimal performance in the harsh laser–plasma environment.

Abstract We report on experimental investigations of proton acceleration from solid foils irradiated with PW-class laser-pulses, where highest proton cut-off energies were achieved for temporal pulse parameters that varied significantly from those of an ideally Fourier transform limited (FTL) pulse. Controlled spectral phase modulation of the driver laser by means of an acousto-optic programmable dispersive filter enabled us to manipulate the temporal shape of the last picoseconds around the main pulse and to study the effect on proton acceleration from thin foil targets. The results show that applying positive third order dispersion values to short pulses is favourable for proton acceleration and can lead to maximum energies of 70 MeV in target normal direction at 18 J laser energy for thin plastic foils, significantly enhancing the maximum energy compared to ideally compressed FTL pulses. The paper further proves the robustness and applicability of this enhancement effect for the use of different target materials and thicknesses as well as laser energy and temporal intensity contrast settings. We demonstrate that application relevant proton beam quality was reliably achieved over many months of operation with appropriate control of spectral phase and temporal contrast conditions using a state-of-the-art high-repetition rate PW laser system.

In this article, we report on the latest investigations and achievements in proton beam shaping with our laser-driven ion beamline at GSI Helmholtzzentrum für Schwerionenforschung GmbH. This beamline was realized within the framework of the Laser Ion Generation, Handling, and Transport (LIGHT) collaboration to study the combination of laser-driven ion beams with conventional accelerator components. At its current state, the ions are accelerated by the high-power laser PHELIX via target normal sheath acceleration, and two pulsed high-magnetic solenoids are used for energy selection, transport, and transverse focusing. In between the two solenoids, there is a rf cavity that gives the LIGHT beamline the capability to longitudinally manipulate and temporally compress ion bunches to sub-nanosecond durations. To get optimal results, the rf cavity has to be synchronized with the PHELIX laser and therefore a reliable measurement of the temporal ion beam profile is necessary. In the past, these measurements showed unexpected correlations between the temporal beam profile and the phase as well as the electric field strength of the cavity. In this article, we present a numerical simulation of the beam transport through the LIGHT beamline which explains this behavior by a beam filamentation. We also report on our latest experimental campaigns, in which we combined transverse and longitudinal focusing for the first time. This led to proton bunches with a peak intensity of (3.28±0.24)×10^{8} protons/(ns mm^{2}) at a central energy of (7.72±0.14) MeV. The intensity refers to a circle with a diameter of (1.38±0.02) mm that encloses 50% of the protons in the focal spot at the end of the beamline. The temporal bunch width at this position was (742±40) ps (FWHM).

We report on our latest transverse focusing results of subnanosecond proton bunches achieved with a laser-driven multi-MeV ion beamline. In the frame of the LIGHT collaboration, a target normal sheath acceleration (TNSA) source based 6 m long beamline was installed. In the past years, the laser-driven proton beam was transported and shaped by this beamline. The particle beam is collimated with a pulsed high-field solenoid and rotated in longitudinal phase space with a radio-frequency cavity which leads to an energy compression with an energy spread of (2.7±1.7)% (ΔE/E_{0} at FWHM) or a time compression to the subnanosecond regime. Highest peak intensities in the subnanosecond regime open up an interesting field for several applications, e.g., proton imaging, as injectors in conventional accelerators or precise stopping power measurements in a plasma. We report on achieving highest peak intensities using an installed second solenoid as a final focusing system in our beamline to achieve small focal spot sizes. We measured a focal spot size of 1.1×1.2 mm leading to 5.8×10^{19} protons per s cm^{2} at a central energy bin of (9.55±0.25) MeV, which can be combined with a bunch duration below 500 ps at FWHM.

The spatial distribution of protons accelerated from submicron-thick plastic foil targets using multi-terawatt, frequency-doubled laser pulses with ultra-high temporal contrast has been investigated experimentally. A very stable, ring-like beam profile of the accelerated protons, oriented around the target’s normal direction has been observed. The ring’s opening angle has been found to decrease with increasing foil thicknesses. Two-dimensional particle-in-cell simulations reproduce our results indicating that the ring is formed during the expansion of the proton density distribution into the vacuum as described by the mechanism of target-normal sheath acceleration. Here—in addition to the longitudinal electric fields responsible for the forward acceleration of the protons—a lateral charge separation leads to transverse field components accelerating the protons in the lateral direction. [ABSTRACT FROM AUTHOR]

For laser-driven ion acceleration from thin foils (∼10 μm–100 nm) in the target normal sheath acceleration regime, the hydro-carbon contaminant layer at the target surface generally serves as the ion source and hence determines the accelerated ion species, i.e. mainly protons, carbon and oxygen ions. The specific characteristics of the source layer—thickness and relevant lateral extent—as well as its manipulation have both been investigated since the first experiments on laser-driven ion acceleration using a variety of techniques from direct source imaging to knife-edge or mesh imaging. In this publication, we present an experimental study in which laser ablation in two fluence regimes (low: F ∼ 0.6 J cm−2, high: F ∼ 4 J cm−2) was applied to characterize and manipulate the hydro-carbon source layer. The high-fluence ablation in combination with a timed laser pulse for particle acceleration allowed for an estimation of the relevant source layer thickness for proton acceleration. Moreover, from these data and independently from the low-fluence regime, the lateral extent of the ion source layer became accessible. [ABSTRACT FROM AUTHOR]

Blast-wave-driven hydrodynamic instabilities are studied in the presence of a background B-field through experiments and simulations in the high-energy-density (HED) physics regime. In experiments conducted at the Laboratoire pour l’utilisation des lasers intenses (LULI), a laser-driven shock-tube platform was used to generate a hydrodynamically unstable interface with a prescribed sinusoidal surface perturbation, and short-pulse x-ray radiography was used to characterize the instability growth with and without a 10-T B-field. The LULI experiments were modeled in FLASH using resistive and ideal magnetohydrodynamics (MHD), and comparing the experiments and simulations suggests that the Spitzer model implemented in FLASH is necessary and sufficient for modeling these planar systems. These results suggest insufficient amplification of the seed B-field, due to resistive diffusion, to alter the hydrodynamic behavior. Although the ideal-MHD simulations did not represent the experiments accurately, they suggest that similar HED systems with dynamic plasma-β (=2μ0ρv2/B2) values of less than ∼100 can reduce the growth of blast-wave-driven Rayleigh–Taylor instabilities. These findings validate the resistive-MHD FLASH modeling that is being used to design future experiments for studying B-field effects in HED plasmas.