Search

Fluorescent brightening agents are widely used in various industries to enhance the appearance of materials. In order to describe the colour of a fluorescent surface, accurate measurements of fluorescence emission are needed. In this work, measurements of goniometrically resolved bispectral luminescent radiance factors are presented with improved uncertainties. In addition, a method for goniometrically determining the spectral quantum efficiencies of the fluorescent process is presented and validated. The advantage of goniometric measurements is that they avoid the need to assume a specific angular emission profile of the fluorescent sample. [ABSTRACT FROM AUTHOR]

To determine the bidirectional transmittance distribution function (BTDF) of diffusely transmitting materials, two new primary facilities have been developed at the Physikalisch-Technische Bundesanstalt (PTB) and Aalto University (Aalto). A detailed description of both facilities and the different approaches used are presented in this paper. The performance of both facilities is compared by determining the BTDF of two different diffuser types in both in-plane and out-of-plane bidirectional geometries at four different wavelengths in the visible spectral range. Due to delayed completion of PTB's primary facility, the measured BTDF values are compared between Aalto's primary facility and another PTB setup, whose measurement scales are successfully transferred to PTB's primary facility by an internal comparison. A thorough analysis of the measurement uncertainty is presented, leading to a combined k = 1 standard uncertainty of 0.8%-1.2% for PTB's primary facility and 1.3%-1.7% for Aalto's primary facility. The BTDF results obtained agree well within their expanded k = 2 uncertainty. This indirect bilateral comparison shows that Aalto's and PTB's new facilities are suited as primary reference setups for the determination of the BTDF. These studies also reveal action points to improved measurement capabilities and for a reduction of the measurement uncertainty, depending on the type of diffuser under test., (© 2023 Author(s). All article content, except where otherwise noted, is licensed under a Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).)

We performed a systematic study involving simulation and experimental techniques to develop induced-junction silicon photodetectors passivated with thermally grown SiO 2 and plasma-enhanced chemical vapor deposited (PECVD) SiN x thin films that show a record high quantum efficiency. We investigated PECVD SiN x passivation and optimized the film deposition conditions to minimize the recombination losses at the silicon-dielectric interface as well as optical losses. Depositions with varied process parameters were carried out on test samples, followed by measurements of minority carrier lifetime, fixed charge density, and optical absorbance and reflectance. Subsequently, the surface recombination velocity, which is the limiting factor for internal quantum deficiency (IQD), was obtained for different film depositions via 2D simulations where the measured effective lifetime, fixed charge density, and substrate parameters were used as input. The quantum deficiency of induced-junction photodiodes that would be fabricated with a surface passivation of given characteristics was then estimated using improved 3D simulation models. A batch of induced-junction photodiodes was fabricated based on the passivation optimizations performed on test samples and predictions of simulations. Photodiodes passivated with PECVD SiN x film as well as with a stack of thermally grown SiO 2 and PECVD SiN x films were fabricated. The photodiodes were assembled as light-trap detector with 7-reflections and their efficiency was tested with respect to a reference Predictable Quantum Efficient Detector (PQED) of known external quantum deficiency. The preliminary measurement results show that PQEDs based on our improved photodiodes passivated with stack of SiO 2 /SiN x have negligible quantum deficiencies with IQDs down to 1 ppm within 30 ppm measurement uncertainty.

A high-sensitivity light-emitting diode (LED)-based photoacoustic NO 2 sensor is demonstrated. Sensitive photoacoustic gas sensors based on incoherent light sources are typically limited by background noise and drifts due to a strong signal generated by light absorbed at the photoacoustic cell walls. Here, we reach a sub-ppb detection limit and excellent stability using cantilever-enhanced photoacoustic detection and perform a two-channel relative measurement. A white-light LED is used as a light source, and the spectrum is divided into two wavelength channels with a dichroic filter. The photoacoustic signals generated by the two wavelength channels are measured simultaneously and used to solve the NO 2 concentration. The background signal is highly correlated between the two channels, and its variations are suppressed in the relative measurement. A noise level below 1 ppb is reached with an averaging time of 70 s. This is, to the best of our knowledge, the first time a sub-ppb detection limit is demonstrated with an LED-based photoacoustic NO 2 sensor. As LEDs are available at a wide selection of emission wavelengths, the results show great potential for development of cost-effective and sensitive detectors for a variety of other trace gasses as well.

Array spectroradiometers are attractive alternatives to scanning spectroradiometers in solar ultraviolet measurements. However, the measurement of solar spectral irradiance imposes stringent requirements for the linearity of the instruments. In this article, two array spectroradiometers were characterized for nonlinearity. Significant nonlinearities, in excess of 10%, as a function of analog-to-digital converter counts were discovered. Additional nonlinearities as a function of integration time were observed at very long integration times. No clear residual nonlinearity as a function of spectral irradiance was witnessed despite the characterization spanning four orders of magnitude of spectral irradiance. The characterizations were carried out with three measurement setups that are briefly compared.

A comparison between the absolute gonioreflectometric scales at the Helsinki University of Technology (TKK) and the Physikalisch-Technische Bundesanstalt (PTB) has been accomplished. Six different reflection standards were measured for their 0:45 spectral radiance factor between 250 and 1650 nm in 10 nm intervals. Also, the 0:d reflectance factor between 400 and 1600 nm in 100 nm intervals was determined from goniometric reflectance measurements over polar angles with subsequent integration within the hemisphere above the sample. Goniometric comparisons covering such an extensive wavelength range and also several different sample materials are rarely implemented. For all but one sample, the difference between the results obtained at the TKK and the PTB was, with the exception of a couple of measurement points, within the expanded uncertainty (k = 2) of the comparison at least up to a wavelength of 1400 nm. All differences between the measurement results can be understood, except for one translucent sample in the visible wavelength range. The effect of sample translucency was found to be significant in the NIR wavelength region. Also, a general tendency of an increase of the TKK values relative to the PTB values in the UV region was observed. Possible causes for this phenomenon are discussed.

A goniofluorometer has been built that is capable of measuring in various viewing angles ranging from 10 degrees to 90 degrees . The incident angle can be varied from 0 degrees to 8 degrees . The goniofluorometer can measure bispectral luminescent radiance factors in the wavelength range of 250-800 nm. To our knowledge, there are no other reported results of similar devices capable of spectral measurements in various measurement geometries.

The optical parameters of a SiO2 thin-film coating determined from the spectral reflectance and transmittance measurements at various incidence angles, including the normal incidence and the Brewster's angle, are compared in this paper. The high-accuracy measurements were carried out through visible-near-infrared spectral regions by using our purpose-built instruments. The optical parameters obtained from the reflectance and the transmittance data are consistent over the angles of incidence and agree within 0.2%. The effect of important systematic factors in the oblique-incidence spectrophotometric measurements is also discussed.

Gonioreflectometric determination of reflectance factors that involves hemispherical collection of reflected flux, which is an alternative to integrating sphere-based methods, is discussed. A detailed description of a gonioreflectometer built at the Helsinki University of Technology is presented. The instrument is used to establish an absolute scale of total diffuse reflectance factors throughout the spectral range 360-830 nm. The hemispherical reflectance factors are obtained through integration of the gonioreflectometric measurement results. The reflectance factors of white high-quality artifacts can be determined with a combined standard uncertainty of 0.20%. Results of test measurements were found to be in agreement with values traceable to other absolute scales based on integrating-sphere methods.