Search

This paper examines how differences in motivation in terms of use and non-use values affect the choice of animal welfare improvement practices. The application is focused on Swedish dairy farmers’ preferences for different flooring systems’ attributes. Using multiple indicators and multiple causes and hybrid latent class models, the findings demonstrate that dairy farmers who favour flooring solutions that enhance farm animal welfare are motivated by a complex set of both use values relating to internal and external pressures and non-use values linked to animal freedom, ethical codes of farmers and building business-to-customer relationships. The findings imply that measures to stimulate more uptake of animal welfare improvement practices can be better targeted by using insights into motivational constructs of farmers and by adopting policy communication that captures the whole breadth of use and non-use motivational constructs held by farmers.

In this paper, we examine preferences for flooring properties that enhance animal welfare in dairy cattle barns among a sample of Swedish dairy farmers. The findings reveal that respondents differ in their choice of flooring properties that improve farm animal welfare. The findings also show that they consider low-slip risk and the softness of floors to be the most important properties. Findings from a latent variable model revealed that floor packaging and installation, workability and animal welfare are important factors that explain the respondents’ preferences for different types of floors. The findings demonstrate that dairy farmers who prefer soft, low-slip and less abrasive floors are influenced by the way the floors are incorporated and installed into the building design, the ease with which other tasks can be performed after installing the flooring and the welfare that the specific flooring provides for the animals. The findings contribute relevant insights that are needed for the promotion and adoption of farm management practices that improve animal welfare.

Claw health, an important dairy cow welfare parameter, may be affected by early-life foot/leg stresses. To investigate this, groups of pregnant heifers were allocated to deep straw bedding (Soft) or cubicles (Hard), both with scraped concrete feeding alleys. After the grazing season, they were re-housed in cubicle systems, half on slatted concrete (Hard) and half on slatted rubber (Soft) alleys. Claw measurements, contact area and pressure distribution claw/flooring, claw disorders and leg lesions were recorded at the start and end of each housing season. Locomotion and leg lesions were also scored monthly after calving. Prevalence of sole haemorrhages was higher among pregnant heifers in cubicles than in deep straw. After calving, first-calvers on Hard floors had higher odds for lameness (OR = 3.6, P &lt, 0.01), sole haemorrhages/ulcers (OR = 2.2, 0.05), white-line haemorrhages (OR = 2.8, 0.01) and leg lesions (OR = 2.6, 0.02) than those on Soft floors. Lowest prevalence and severity of sole and white-line haemorrhages (non-significant) in first-calvers was found in those on Soft floors and reared on Hard floors and the highest prevalence and severity on those on Hard floors reared on Soft floors. Soft flooring after calving is of most importance for healthy feet and legs.

This study assessed the slip resistance of different types of solid flooring in cattle housing using a range of technical tests and gait analysis. Dynamic and static coefficient of friction, skid resistance, and abrasiveness were tested on concrete flooring with a smooth finish, a grooved pattern, or a tamped pattern, acid-resistant mastic asphalt, soft rubber mats, and a worn slatted concrete floor. Coefficients of friction and skid resistance were tested under clean and slurry-soiled conditions. Linear kinematic variables were assessed in 40 cows with trackway measurements after the cows passed over the floors in a straight walk. All gait variables were assessed as deviations from those obtained on the slatted concrete floor, which was used as a baseline. The coefficient of friction tests divided the floors into 3 categories: concrete flooring, which had a low coefficient of friction (0.29-0.41); mastic asphalt flooring, which had medium values (0.38-0.45); and rubber mats, which had high values (0.49-0.57). The highest abrasion (g/10 m) was on the asphalt flooring (4.48), and the concrete flooring with a tamped pattern had significantly higher abrasiveness (2.77) than the other concrete floors (1.26-1.60). Lowest values on the skid-resistance tests (dry/wet) were for smooth concrete (79/35) and mastic asphalt (65/47), especially with a slurry layer on the surface. Gait analysis mainly differentiated floors with higher friction and abrasion by longer strides and better tracking. Step asymmetry was lower on floors with high skid-resistance values. The most secure cow gait, in almost every aspect, was observed on soft rubber mats. Relationships between gait variables and physical floor characteristics ranged from average to weak (partial correlations 0.54-0.16). Thus, none of the physical characteristics alone was informative enough to characterize slip resistance. With reference to gait analysis, the abrasiveness of the hard surfaces was more informative than the coefficient of friction, but the effect of pattern was better detected by skid-resistance measurements. Consequently, several physical characteristics are needed to objectively describe the slip resistance of cattle floors. Soft rubber mats gave better tracking than hard, solid floors, even with a grooved surface or a tamped pattern.

Weight and pressure distribution on the claw were studied in Swedish Holsteins housed in different flooring systems. A total of 127 cows housed in different sections of the experimental barn were used. Each section had different flooring in the walking and standing areas. There were rubber mats or abrasive mastic asphalt flooring on the alleys or a low-abrasive slatted concrete floor. Some sections had feed-stalls equipped with rubber mats; other sections did not. The vertical ground reaction force, contact area, and average contact pressure were determined on the left hind foot using the I-Scan system and analyzed with the F-scan system. These determinations were made in each of the following 3 zones of the claw: bulb, wall, and sole. Most of the weight on claws exposed to concrete floors was carried by the bulb (37.4 +/- 3.5 and 18.3 +/- 2.9% of weight exerted on the foot in the lateral and medial claw, respectively) and the wall zone (20.0 +/- 2.6 and 13.4 +/- 2.4% on lateral and medial claw, respectively). The weight and pressure distribution in cows kept on sections with rubber covered alleys but passing daily over the asphalt floor on their way to the milking parlor did not differ in any zones, except for lateral bulbs, compared with those exposed to slatted concrete alone. Still, the weight bearing of the sole zone in cows kept on rubber mats without access to asphalt was less than that of cows kept on concrete slatted floors (5.1 +/- 0.7 vs. 12.7 +/- 1.1% and 1.1 +/- 0.5 vs. 8.7 +/- 0.7% in lateral and medial claws, respectively). In cows kept on asphalt flooring without feed-stalls, most weight was exerted to the sole zone (36.2 +/- 2.9 and 22.2 +/- 1.8% in lateral and medial claws, respectively). Feed-stalls in combination with asphalt flooring yielded a decreased total contact area (30.1 +/- 1.2 cm(2)) compared with asphalt floors without feed-stalls (35.7 +/- 1.2 cm(2)). The largest total contact area was obtained on the asphalt floor without feed-stalls, resulting in a lower contact pressure (39.8 +/- 2.3 N/cm(2)) than in claws exposed to concrete (66.0 +/- 2.7 N/ cm(2)) or rubber mats (56.7 +/- 1.7 N/cm(2)). In conclusion, housing with abrasive floors resulted in claws with increased contact area at the sole surface and therefore, decreased contact pressure, but reduced the weight-bearing role of the strongest part of the claw capsule, the claw wall.

Concrete is the most commonly used alley flooring in confined dairy herds because of its qualities of construction and ease of cleaning. Nevertheless, the hardness, abrasiveness, and slipperiness of concrete floors have adverse effects on animal well-being and health, and yielding rubber flooring is becoming popular as a way of improving the flooring conditions on walkways. The aim of this study was to investigate preferences of dairy cows for rubber compared with concrete flooring under the conditions of a commercial dairy farm. The study was conducted in an organic dairy herd with free-stall housing. Floor preference was tested on groups of standing cows in a 120-m2 holding pen before milking, and 1 yr later on a 12- x 3-m walkway. The holding pen and the walkway were divided lengthwise into 2 identical sections. Two types of solid rubber mats (soft and extra soft) were tested against solid concrete in the holding pen. Slatted and solid rubber mats were tested against slatted concrete in the walkway. Each floor type was tested over 4 d on the left side and 4 d on the right side of the holding pen and the walkway, respectively. Concrete flooring on both sides of the sections was tested as a control before the testing of different section materials. All observations of the distribution of cows in the sections were made from video recordings captured in association with the afternoon milking. The number of cows on each section was recorded approximately every 7 min in the holding pen, and continuously on the walkway. A significantly higher proportion of cows stood on the side with the soft and extra soft rubber mats (65.1 +/- 2.7 and 69.3 +/- 2.6%, respectively, mean +/- SEM) compared with the control distribution when only the solid concrete was available (50.9 +/- 3.9%). A significantly higher proportion of nonlame cows walked exclusively on the side with the slatted (64.5 +/- 5.4%, d 4) or solid rubber mats (68.2 +/- 5.1%, d 4) compared with controls (28.9 +/- 4.3%). Lame cows within a group of walking cows did not show a higher preference for soft flooring as distinct as nonlame cows (52.7 +/- 6.9 and 59.4 +/- 6.2% for the solid and slatted rubber mats, respectively, at d 4 vs. 40.3 +/- 6.2% for control), presumably because of competition with other, higher ranked cows. It was concluded that the majority of cows preferred to walk and stand on soft rubber rather than on concrete flooring.

Locomotion in 36 cows was tested on five different surfaces: solid and slatted concrete with and without 20 mm thick elastic (KEN 1 ) rubber mats and wet, compressed sand (as an example of a natural, yielding surface). The friction of the floors was measured and a trackway measurement system (measurements from footprints) was used for analysis of locomotion. The presence and severity of lameness was scored subjectively. The slatted, crude concrete floor was found to have the lowest coefficient of friction (0.31), the solid, crude concrete floor had a higher friction coefficient (0.58) and rubber mats had an intermediate friction value (0.46). In comparison with the sand surface the cows walked more slowly on the slatted, crude concrete floor, with considerably shortened strides and with the rear feet placed at greater distance behind the front ones. On the solid, crude concrete floor the cows took shorter strides and steps than on the sand surface, but the speed did not differ significantly. Elastic rubber mats on the solid as well as on the slatted concrete floor increased the length of strides and steps. In comparison with non-lame and mildly lame cows, moderately lame animals walked more slowly and had a shorter stride and step length. Analyses within each lameness degree revealed that the moderately lame cows walked with a significantly smaller step angle (which corresponds to a wider posture) on crude solid and slatted concrete in comparison with both the continuous and the slatted rubber floor. The moderately lame cows walked on the rubber mats with roughly the same step angle as on the sand surface. Comparisons of cows with different

The aim of this study was to compare the effect of different access to an exercise area on behaviour, time to lie down, claw conformation, claw lesions and milk production. The study was carried out on an organic dairy farm with 52 tied cows. The cows were randomly assigned to one of four treatments, with 13 cows in each group, and matched according to lactation number, milk production and whether or not they were de-horned. The treatments were: exercise every day (E7), exercise two days per week (E2), exercise one day per week (E1) or no exercise (NoE). Exercised cows were brought to one of two outdoor paddocks for 1 h. Observations of behaviour were made using one-zero sampling during the 1 h exercise, twice per month and treatment, during the six months of winter housing (780 min per group in total). Treatment NoE was observed in their stalls during the same time as the other treatments were exercised. The duration of the two phases of the lying down movement was recorded four times per cow. Claw traits were recorded at trimming at the beginning and the end of the six month study period. The farm measured the individual milk yield one day per month. There was an increase in the mean percentage of walking and trotting with decreasing access to exercise. Cows in the E1 and E2 treatment explored the environment more than cows in the E7 treatment. The wear of the claws during the winter was greater for the exercised cows compared to NoE and resulted in shorter claws at spring trimming. There was no difference in the duration of lying down movements for different treatments, nor a difference in milk production. These results shows that adult dairy cows used the time to walk, trot and explore the environment when given access to an outdoor paddock, and that exercise had a positive effect on the claw conformation.

The effect of different flooring surfaces in walking and standing areas on claw conformation, claw horn growth, and wear was studied in 2 experiments during 2 consecutive housing seasons in a research dairy herd of 170 cows. In experiment 1, the flooring systems tested were solid rubber mats, mastic asphalt with and without rubber-matted feed-stalls, and aged concrete slats. In experiment 2, slatted concrete flooring was compared with slatted rubber flooring. The cows were introduced to the respective flooring systems in early lactation and their claws were trimmed before the exposure period. Toe length, toe angle, sole concavity, and claw width, as well as claw growth and wear rates were recorded for lateral and medial claws of the left hind limb. Claw asymmetry calculations were based on these claw measurements and on differences in sole protrusion between lateral and medial soles. Asphalt floors caused shorter toe length and steeper toe angle. They also increased wear on rear claws (5.30 +/- 0.31 and 5.95 +/- 0.33 mm/mo for lateral and medial claw, respectively; LSM +/- SE) and horn growth rate (5.12 +/- 0.36 and 5.83 +/- 0.31 mm/mo of lateral and medial claws, respectively). Rubber mats instead of asphalt in walking areas reduced wear (1.36 +/- 0.19 and 2.02 +/- 0.20 mm/mo for lateral and medial claw, respectively) and claw growth (3.83 +/- 0.23 and 3.94 +/- 0.17 mm/mo for lateral and medial claw, respectively). Rubber-matted feed-stalls together with asphalt walkways decreased claw wear (3.29 +/- 0.31 and 4.10 +/- 0.32 mm/mo for lateral and medial claw, respectively). The concavity of claw soles was reduced on asphalt, especially in the lateral rear claws. Rubber matting in feed-stalls prevented loss of sole concavity compared with asphalt. Claw asymmetry did not differ between flooring systems. While different access to abrasive flooring affected claw conformation, there was no evidence that flooring system influenced the disproportion between lateral and medial claws.