Search

PURPOSE To investigate the feasibility of navigation with three-dimensional (3D) rotational radiographic data for transpedicular percutaneous needle introduction and to compare navigation with 3D rotational radiographic data with conventional fluoroscopic guidance. MATERIALS AND METHODS A navigation system was coupled to a 3D rotational radiographic imaging system. In a cadaver study, 60 biopsy needles were introduced into vertebral bodies with fluoroscopic guidance or navigation with 3D rotational radiographic data by two interventionalists with different levels of experience in percutaneous procedures. Radiation exposure, fluoroscopy and introduction times, and needle position were evaluated and compared. RESULTS For 3D rotational radiographic navigation, the needle position was equivalent for both interventionalists (7 mm). For fluoroscopic guidance, the interventionalist with less experience in percutaneous procedures had significantly more pedicle cortex violations than the other interventionalist (eight vs one). Radiation exposure measured at the operators' hand was lower for 3D rotational radiography–guided needle introductions. Radiation exposure measured at the body wall of the cadaver was equivalent between modalities (9 mGy). CONCLUSIONS Navigation with 3D rotational radiographic image data is feasible for transpedicular percutaneous needle introduction and has two advantages compared with fluoroscopic guidance: it poses less strict requirements on the expertise of the interventionalist, and it reduces radiation exposure to the interventionalist.

Study design The position of a needle tip displayed on a navigation system after transpedicular introduction into a vertebral body is compared with the real position of the needle tip when using a direct navigation coupling between a three-dimensional rotational X-ray (3DRX) system and a navigation system. Objectives To assess whether the needle tip position displayed by the navigation system corresponds to the real needle position and to quantitatively determine needle navigation accuracy in a clinically relevant setting. Summary of background data Image-guided navigation has reportedly increased the accuracy and safety of pedicle screw insertion and decreased complication rates. In former studies, the result of image-guided navigation was mainly compared qualitatively with the result of conventional fluoroscopy-guided procedures. Previously, a direct navigation coupling between a 3DRX system and a standard navigation system was introduced that bypasses the need for explicit patient-to-image registration necessary for image-guided orthopedic surgery. In a phantom experiment, the reported accuracy of navigation with the coupling to a 3DRX system was approximately 1 mm. However, in a clinical setting, additional errors can be introduced. Methods Twenty-three needles were placed transpedicularly into vertebral bodies of embalmed human trunks using 3DRX-guided navigation. The navigated needle tip positions were compared with the real needle tip positions manually extracted from 3DRX volumes acquired after completion of the introduction. Results The average distance between the navigated needle tip and the real position of the needle tip extracted from a postprocedure 3DRX volume was 2.5 +/- 1.5 mm. Conclusions Accuracy of 3DRX-guided navigation is 2.5 +/- 1.5 mm in a clinically relevant setting, which is less than the accuracy determined in phantom experiments.

Recently, three-dimensional (3D) rotational x-ray imaging has been combined with navigation technology, enabling direct 3D navigation for minimally invasive image guided interventions. In this study, phantom experiments are used to determine the accuracy of such a navigation set-up for a mobile C-arm with propeller motion. After calibration of the C-arm system, the accuracy is evaluated by pinpointing divots on a special-purpose phantom with known geometry. This evaluation is performed both with and without C-arm motion in between calibration and registration for navigation. The variation caused by each of the individual transformations in the calibration and registration process is also studied. The feasibility of direct navigation on 3D rotational x-ray images for functional endoscopic sinus surgery has been evaluated in a cadaver navigation experiment. Navigation accuracy was approximately 1.0 mm, which is sufficient for functional endoscopic sinus surgery. C-arm motion in between calibration and registration slightly degraded the registration accuracy by approximately 0.3 mm. Standard deviations of each of the transformations were in the range 0.15-0.31 mm. In the cadaver experiment, the navigation images were considered in good correspondence with the endoscopic images by an experienced ENT surgeon. Availability of 3D localization information provided by the navigation system was considered valuable by the ENT surgeon.

Study Design. Magnetic resonance (MR) and three-dimensional rotational x-ray (3DRX) images of cadaveric spinal segments were registered using a conventional point-based technique and a noninvasive technique called maximization of mutual information (MMI). Objectives. To assess the feasibility and accuracy of MMI-based registration in comparison with point-based registration as a new noninvasive image-to-patient registration technique for use in minimally invasive image-guided spine surgery. Summary of Background Data. in image-guided orthopedic surgery, correspondence between before surgery acquired images and the patient is required. Currently, this necessitates an invasive registration step, in which anatomic landmarks on the bone surface have to be physically touched by a pointer. To overcome this invasive procedure, we propose using a calibrated 3DRX system, a modality that can visualize high contrast objects intraoperatively and that provides a direct correspondence between the image data and the patient. A noninvasive voxel-based technique is used to register the intraoperative 3DRX image to a before surgery acquired MR image. Methods. Cadaveric thoracic and lumbar spine segments were implanted with markers, which were used as landmarks. The accuracy of the landmark-based registration was compared with MMI-based registration using the residual errors on the marker positions. Results. The errors made using the point-based registration technique were compared with the errors made with MMI. The results show a statistically significant lower. error (P < 0.01) for the proposed MMI method. Conclusions. Noninvasive MMI registration of intraoperative 3DRX images to preoperative MR images is more accurate than point-based registration in cadaveric spine segments. It is therefore a promising technique for replacing the invasive landmark-based registration that is currently used in image-guided spine surgery.

✓Three-dimensional rotational angiography is capable of exquisite visualization of cerebral blood vessels and their pathophysiology. Unfortunately, images obtained using this modality typically show a small region of interest without exterior landmarks to allow patient-to-image registration, precluding their use for neuronavigation purposes. The aim of this study was to find an alternative technique to enable 3D rotational angiography–guided vascular neurosurgery. Three-dimensional rotational angiograms were obtained in an angiographic suite with direct navigation capabilities. After image acquisition, a navigated pointer was used to touch fiducial positions on the patient's head. These positions were located outside the image volume but could nevertheless be transformed into image coordinates and stored in the navigation system. Prior to surgery, the data set was transferred to the navigation system in the operating room, and the same fiducial positions were touched again to complete the patient-to-image registration. This technique was tested on a Perspex phantom representing the cerebral vascular tree and on two patients with an intracranial aneurysm. In both the phantom and patients, the neuronavigation system provided 3D images representing the vascular tree in its correct orientation, that is, the orientation seen by the neurosurgeon through the microscope. In one patient, tissue shift was clearly observed without significant changes in the orientation of the structures. Results in this study demonstrate the feasibility of using 3D rotational angiography data sets for neuronavigation purposes. Determining the benefit of this type of navigation should be the subject of future studies.

A new method for MR to X-ray registration is presented. Based on training data, consisting of registered multispectral MR and CT data, a function is defined that maps multispectral MR data to CT-like data. For new subjects for which multispectral MR data have been acquired, the mapping function is used to generate a corresponding CT-like dataset. The CT-like image is subsequently used for registration to X-ray data, using gradient-based registration. Preliminary experiments indicate that MR to X-ray registration using this method is more accurate and has a larger capture range than gradient-based registration applied directly to MR data.

In a human cadaveric burst fracture model with and without longitudinal ligament damage, the amount of anterior and posterior bone displacement (ABD, PBD) during balloon vertebroplasty after pedicle-screw instrumentation was investigated quantitatively.To investigate, in a burst fracture model with and without longitudinal ligament damage, the amount of ABD, PBD, and cement leakage at various phases during balloon vertebroplasty in combination with pedicle-screw instrumentation.The role of intact longitudinal ligaments in traumatic spine fractures, for prevention of bone retropulsion and subsequent reduction, has been discussed in several studies but is still up for debate. In a recent human cadaveric burst fracture study, inflatable bone tamps and calcium phosphate cement were used for the augmentation of the anterior column after pedicle-screw instrumentation. The additional balloon vertebroplasty procedure was found to be feasible and safe, but no data pertaining to unwarranted bone displacement or cement leakage during the procedure are available for burst fractures with damaged longitudinal ligaments.Ten thoracic and 10 lumbar burst fractures, with rotation or flexion components, were created, and balloon vertebroplasty with calcium phosphate cement was performed after pedicle-screw instrumentation. Volumetric datasets (using the 3-dimensional (3D) rotational x-ray imaging technique) of the fractures were obtained during the following phases: intact, fractured, after reduction and stabilization with pedicle-screws, after inflation of the balloons, after deflation and removal of the balloons, and after injection of the cement. The amount of ABD and PBD was measured on reconstructed sagittal images and recorded together with the presence of extracorporal cement leakage. The continuity of the longitudinal ligaments was assessed after anatomic dissection.During the balloon vertebroplasty procedure, a significant (P0.05) increase of ABD (at both thoracic and lumbar level) and PBD (thoracic level) occurred after inflation of the balloons. After deflation and subsequent injection of the cement, however, the ABD and PBD returned to the preinflation levels. The absolute amount of ABD and PBD (1 mm) during inflation was considered of little clinical importance. No differences in ABD or PBD were observed for specimens with or without continuity of the corresponding longitudinal ligament, irrespective of the level, at any of the phases during the experiment (P0.5 in all cases). A small amount of cement leakage was observed in the psoas compartment of one specimen with intact longitudinal ligaments.It is suggested that balloon vertebroplasty after pedicle-screw instrumentation may safely be used, in terms of bone displacement and cement leakage, in fracture types where damage to longitudinal ligaments is to be expected.

The most widely used imaging devices in trauma spine surgery are fluoroscopy and computed tomography. Both techniques have their specific pros and cons and expose both patient and operating staff to considerable radiation during image acquisition. Three-dimensional-rotational x-ray imaging (3-DRX) is a relatively new technique in which a C-arm is moved around the patient to allow for an "acquisition run" during which multiple fluoroscopy images are obtained. The images can subsequently be processed on a workstation into a 3-D volume, which can then be manipulated in a similar way to 3-D computed tomography data. The 3-DRX technique combines the advantages of both fluoroscopy and computed tomography: fast visual feedback and high resolution multiplanar reformatted images, respectively, and could be used in an intraoperative setting. In this paper some technical aspects of 3-DRX imaging and its potential role in spinal trauma treatment are presented.

Study design A validation study was done in which reconstructed three-dimensional rotational x-ray images were quantitatively compared with corresponding anatomic sections. Objectives To assess the accuracy of reconstructed images acquired on a three-dimensional rotational x-ray imaging device. Summary of background data Minimally invasive procedures have proven quite successful as alternatives for a multitude of open treatments. An unfavorable property of this type of procedure is a lack of direct vision of the operating area. Three-dimensional rotational x-ray imaging may be able to merge the advantages of computed tomography and fluoroscopy: real-time two-dimensional projections for fast visual feedback and three-dimensional reconstructions for detailed volumetric imaging of complex anatomy. Methods Twenty traumatic thoracolumbar burst fractures were created and underwent pedicle screw instrumentation and balloon vertebroplasty. Subsequently, a three-dimensional dataset was obtained, and the midsagittal image was reconstructed. The specimens were sliced, and photographs were obtained. Multiple parameters on the reconstructed images and photographs were measured two times by two observers using a graphical method. The differences and standard deviations were calculated for the corresponding parameters and for the intraobserver data. Results The mean difference between the corresponding values ranged between -1.1 and 2.1 mm for all parameters. The standard deviation for the differences per parameter ranged between 1.2 and 3.2 mm. The intraobserver differences ranged from -0.8 to 1.4 mm, and the standard deviation varied between 0.4 and 2.4 mm. Conclusions The reconstructed midsagittal images were accurate in all measured parameters. The three-dimensional rotational x-ray technique may prove to be valuable for less invasive spine surgery.

3D Rotational X-ray (3DRX) imaging can be used to intraoperatively acquire 3D volumes depicting bone structures in the patient. Registration of 3DRX to MR images, containing soft tissue information, facilitates image guided surgery on both soft tissue and bone tissue information simultaneously. In this paper, automated noninvasive registration using maximization of mutual information is compared to conventional interactive and invasive point-based registration using the least squares fit of corresponding point sets. Both methods were evaluated on 3DRX images (with a resolution of 0.62x0.62x0.62 mm 3 ) and MRI images (with resolutions of 2x2x2 mm 3 , 1.5x1.5x1.5 mm 3 and 1x1x1 mm 3 ) of seven defrosted spinal segments implanted with six or seven markers. The markers were used for the evaluation of the registration transformations found by both point- and maximization of mutual information based registration. The root-mean-squared-error on markers that were left out during registration was calculated after transforming the marker set with the computed registration transformation. The results show that the noninvasive registration method performs significantly better (p≤0.01) for all MRI resolutions than point-based registration using four or five markers, which is the number of markers conventionally used in image guided surgery systems.