Search

Changes in mass and viscoelasticity of chitin layers in fungal cell walls during chitinase attack are vital for understanding bacterial invasion of and human defense against fungi. In this work, regenerated chitin (RChitin) thin films mimicked the fungal chitin layers and facilitated studies of degradation by family 18 chitinases from Trichoderma viride ( T. viride ) and family 19 chitinases from Streptomyces griseus ( S. griseus ) that possessed chitin-binding domains (CBDs) that were absent in the family 18 chitinases. Degradation was monitored via a quartz crystal microbalance with dissipation monitoring (QCM-D) in real time at various pH and temperatures. Compared to substrates of colloidal chitin or dissolved chitin derivatives and analogues, the degradation of RChitin films was deeply affected by chitinase adsorption. While the family 18 chitinases had greater solution activity on chitin oligosaccharides, the family 19 chitinases exhibited greater surface activity on RChitin films, illustrating the importance of CBDs for insoluble substrates.

Polymeric micelles coexist in solution with unassembled chains (unimers). We have investigated the influence of glass transition temperature ( T g ) (i.e., chain mobility) of the micelle core-forming blocks on micelle-unimer coexistence. We synthesized a series of seven PEG- b -P( n BA- ran-t BA) amphiphilic block copolymers (PEG = poly(ethylene glycol), n BA = n -butyl acrylate, t BA = tert -butyl acrylate) with similar molecular weights (12 kg/mol). Varying the n BA/ t BA molar ratio enabled broad modulation of core block T g with no significant change in core hydrophobicity or micelle size. NMR diffusometry revealed increasing unimer populations from 0% to 54% of total polymer concentration upon decreasing core block T g from 25 to -46 °C. Additionally, unimer population at fixed polymer composition (and thus core T g ) increased with temperature. This study demonstrates the strong influence of core-forming block mobility on polymer self-assembly, providing information toward designing drug delivery systems and suggesting the need for new dynamical theory., Competing Interests: The authors declare no competing financial interest.

Non-enzymatic degradation of wood via a chelator-mediated Fenton (CMF) system is the primary method for initial attack in brown rot fungal decomposition of wood, the most common type of fungal degradation of terrestrial carbon biomass on the planet. In this study, the degradation of thin films of cellulose and chitin by a CMF system was investigated and compared to enzymatic hydrolysis. The kinetics of the rapid cellulose and chitin deconstruction and the morphologies of the degraded cellulose and chitin surfaces were studied by quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM), respectively. The QCM-D results quantitatively indicated that ~90 wt% of the regenerated cellulose or chitin was capable of being deconstructed by CMF action alone. While enzymatic degradation was consistent with stripping of layers from the surface of the cellulose or chitin films, the CMF process exhibited a pronounced two stage process with a rapid initial depolymerization throughout the films. The initial degradation rates for both model surfaces by the CMF system were faster than enzyme action. This research suggests that the CMF process should be applicable for the deconstruction of a wide variety of polysaccharides over Fenton chemistry alone., Competing Interests: Declaration of competing interest There are no conflicts of interest to declare., (Copyright © 2020. Published by Elsevier B.V.)

The interaction between cellulose and hemicelluloses is of fundamental importance for understanding the molecular architecture of plant cell walls. Adsorption of xyloglucan (XG) onto regenerated cellulose (RC), sulfated cellulose nanocrystal (s-CNC), and desulfated cellulose nanocrystal (d-CNC) films was studied by quartz crystal microbalance with dissipation monitoring, surface plasmon resonance, and atomic force microscopy. The amount of XG adsorbed onto different cellulose substrates increased in the order RC < s-CNC < d-CNC. The adsorption of XG onto RC films was independent of film thickness ( d ), whereas XG adsorption was weakly dependent on d for s-CNC films and strongly dependent on d for d-CNC films. However, approximately the same amount of XG adsorbed onto "monolayer-thin" films of RC, s-CNC, and d-CNC. These results suggest that the morphology and surface charge of the cellulose substrate played a limited role in XG adsorption and highlight the importance of film thickness of cellulose nanocrystalline films to XG adsorption., Competing Interests: The authors declare no competing financial interest.

Surface-associated microbial communities, known as biofilms, pose significant challenges in clinical and industrial settings. Micro-/nanoscale substratum surface features have been shown to disrupt firm adhesion of planktonic microbes to surfaces, thereby interfering with the earliest stage of biofilm formation. However, the role of geometry and size of surface features in microbial retention is not completely understood. In this study, we developed a biophysical model that describes the changes in the total free energy (adhesion energy and stretching energy) of an adherent Candida albicans cell on nanofiber-coated surfaces as a function of the geometry (i.e., diameter) and configuration (i.e., interfiber spacing) of the surface features (i.e., nanofibers). We then introduced a new nondimensional parameter, Π, to represent the ratio of cell rigidity to cell-substratum interfacial energy. We show that the total free energy is a strong function of topographical feature size at higher Π and lower spacing values. To confirm our biophysical model predictions, we performed 24 h dynamic retention assays and quantified cell attachment number density on surfaces coated with highly ordered polystyrene nanofibers. We show that the total free energy of a single adherent cell on a patterned surface is a key determinant of microbial retention on that surface. The cell attachment density trend closely correlates with the predictions based on the adherent single-cell total energy. The nanofiber coating design (1.2 μm diameter, 2 μm spacing) that maximized the total energy of the adherent cell resulted in the lowest microbial retention. We further demonstrate the utility of our biophysical model by showing close correlation between the computed single-cell total free energy and biofilm nucleation on fiber-coated urinary and central venous catheters of different materials. This biophysical model could offer a powerful new paradigm in ab initio design of patterned surfaces for controlled biofilm growth for medical applications and beyond.

Residual lignin in pretreated biomass impedes enzymatic hydrolysis. Nonionic surfactants are known to enhance the enzymatic hydrolysis of lignocellulosic biomass but their mechanisms of action are incompletely understood. This study investigates the effect of a nonionic surfactant, Tween 80, on the adsorption of cellulases onto model lignin substrates. Lignin substrates were prepared by spin coating of flat substrates with three different types of lignin: organosolv lignin, kraft lignin, and milled wood lignin. The functional group distributions in the lignins were quantitatively analyzed by 31 P NMR spectroscopy. The surface energies and surface roughnesses of the substrates were determined by contact angle measurements and atomic force microscopy, respectively. Tween 80 and cellulase adsorption onto the lignin substrates was analyzed with a quartz crystal microbalance with dissipation monitoring. Tween 80 adsorbed rapidly and primarily (≥85%) via dispersion interactions onto the lignin substrates and effected solubilization of lignin molecules, most notably with organosolv lignin, having the largest dispersive surface energy component and smallest molar mass. Cellulase adsorption onto the lignin substrates was mostly irreversible and had both a rapid and a gradual adsorption stage. Rapid cellulase adsorption was primarily (≥64%) mediated by dispersion interactions. The subsequent gradual mass increase is postulated to involve swelling of the lignin substrates. Adsorbed Tween 80 rendered lignin surfaces more hydrophilic by increasing their polar surface energy component and reduced both the extent of rapid cellulase adsorption as well as the rate of the subsequent gradual mass increase. The effect of Tween 80 on the rate and extent of the gradual mass increase depended strongly on the chemical properties of the lignin.

Conventional free radical polymerization and post-alkylation of 4-diphenylphosphino styrene (DPPS) generate a new class of high-molecular-weight phosphonium-containing homopolymers with tunable thermal, viscoelastic, and wetting properties. Post-alkylation and subsequent anion exchange provide an effective method for tuning Tg values and thermal stability as a function of alkyl chain length and counteranion selection (X(-) , BF4 (-) , TfO(-) , and Tf2 N(-) ). Rheological characterization facilitates the generation of time-temperature-superposition (TTS) pseudomaster curves and subsequent analysis of frequency sweeps at various temperatures reveals two relaxation modes corresponding to long-range segmental motion and the onset of viscous flow. Contact angle measurements reveal the influence of counteranion selection on wetting properties, revealing increased contact angles for homopolymers containing nucleophilic counteranions. These investigations provide fundamental insight into phosphonium-containing polymers, aiming to guide future research and applications involving electro-active polymeric devices., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Cationic derivatives of cellulose and other polysaccharides are attractive targets for biomedical applications due to their propensity for electrostatically binding with anionic biomolecules, such as nucleic acids and certain proteins. To date, however, relatively few practical synthetic methods have been described for their preparation. Herein, we report a useful and efficient strategy for cationic cellulose ester salt preparation by the reaction of 6-bromo-6-deoxycellulose acetate with pyridine or 1-methylimidazole. Dimethyl sulfoxide solvent favored this displacement reaction to produce cationic cellulose acetate derivatives, resulting in high degrees of substitution (DS) exclusively at the C-6 position. These cationic cellulose derivatives bearing substantial, permanent positive charge exhibit surprising thermal stability, dissolve readily in water, and bind strongly with a hydrophilic and anionic surface, supporting their potential for a variety of applications such as permeation enhancement, mucoadhesion, and gene or drug delivery. Expanding upon this chemistry, we reacted a 6-imidazolyl-6-deoxycellulose derivative with 1,3-propane sultone to demonstrate the potential for further elaboration to regioselectively substituted zwitterionic cellulose derivatives.

Hair-derived keratin biomaterials composed mostly of reduced keratin proteins (kerateines) have demonstrated their utility as carriers of biologics and drugs for tissue engineering. Electrostatic forces between negatively-charged keratins and biologic macromolecules allow for effective drug retention; attraction to positively-charged growth factors like bone morphogenetic protein 2 (BMP-2) has been used as a strategy for osteoinduction. In this study, the intermolecular surface and bulk interaction properties of kerateines were investigated. Thiol-rich kerateines were chemisorbed onto gold substrates to form an irreversible 2-nm rigid layer for surface plasmon resonance analysis. Kerateine-to-kerateine cohesion was observed in pH-neutral water with an equilibrium dissociation constant (KD) of 1.8 × 10(-4) M, indicating that non-coulombic attractive forces (i.e. hydrophobic and van der Waals) were at work. The association of BMP-2 to kerateine was found to be greater (KD = 1.1 × 10(-7) M), within the range of specific binding. Addition of salts (phosphate-buffered saline; PBS) shortened the Debye length or the electrostatic field influence which weakened the kerateine-BMP-2 binding (KD = 3.2 × 10(-5) M). BMP-2 in bulk kerateine gels provided a limited release in PBS (~ 10% dissociation in 4 weeks), suggesting that electrostatic intermolecular attraction was significant to retain BMP-2 within the keratin matrix. Complete dissociation between kerateine and BMP-2 occurred when the PBS pH was lowered (to 4.5), below the keratin isoelectric point of 5.3. This phenomenon can be attributed to the protonation of keratin at a lower pH, leading to positive-positive repulsion. Therefore, the dynamics of kerateine-BMP-2 binding is highly dependent on pH and salt concentration, as well as on BMP-2 solubility at different pH and molarity. The study findings may contribute to our understanding of the release kinetics of drugs from keratin biomaterials and allow for the development of better, more clinically relevant BMP-2-conjugated systems for bone repair and regeneration.

Chemical incompatibility and relatively weak interaction between lignocellulosic fibers and synthetic polymers have made studies of wood fiber-thermoplastic composite more challenging. In this study, adsorption of 2-hydroxypropyltrimethylammonium xylans onto rod-like cellulose nanocrystals are investigated by zeta-potential measurements, and polarized and depolarized dynamic light scattering as a factor for better understanding of lignocellulosic fibers and cellulose nanocrystals. Zeta-potential measurements show xylan derivative adsorption onto cellulose nanocrystals. Decay time distributions of the ternary system and binary system from dynamic light scattering show that aggregates exist in the binary system and they disappear in the ternary system. At low 2-hydroxypropyltrimethylammonium xylan concentrations relative to that of cellulose nanocrystal, xylan derivatives adsorbed onto some of the cellulose nanocrystal. Hence, more xylan derivatives adsorbed onto cellulose nanocrystal increased with increasing xylan derivative concentration. Also, the concentration dependence of the ratio of the rotational diffusion coefficient to the translational diffusion coefficient revealed a strong adsorptive interaction between xylan derivatives and the cellulose nanocrystals., (Copyright © 2014 Elsevier Inc. All rights reserved.)

(1,3)(1,4)-β-D-Glucan (mixed-linkage glucan or MLG), a characteristic hemicellulose in primary cell walls of grasses, was investigated to determine both its role in cell walls and its interaction with cellulose and other cell wall polysaccharides in vitro. Binding isotherms showed that MLG adsorption onto microcrystalline cellulose is slow, irreversible, and temperature-dependent. Measurements using quartz crystal microbalance with dissipation monitoring showed that MLG adsorbed irreversibly onto amorphous regenerated cellulose, forming a thick hydrogel. Oligosaccharide profiling using endo-(1,3)(1,4)-β-glucanase indicated that there was no difference in the frequency and distribution of (1,3) and (1,4) links in bound and unbound MLG. The binding of MLG to cellulose was reduced if the cellulose samples were first treated with certain cell wall polysaccharides, such as xyloglucan and glucuronoarabinoxylan. The tethering function of MLG in cell walls was tested by applying endo-(1,3)(1,4)-β-glucanase to wall samples in a constant force extensometer. Cell wall extension was not induced, which indicates that enzyme-accessible MLG does not tether cellulose fibrils into a load-bearing network.

Elucidating the interactions between crystalline chitin and various biomacromolecules is of fundamental importance for designing and fabricating chitin-based biomaterials. This work highlights a simple method to prepare ultrathin films of chitin nanocrystals (chitin NC) by spincoating chitin NCs from a colloidal suspension onto a gold surface modified by an amine-terminated self-assembled monolayer. Atomic force microscopy confirmed that chitin NC films are reasonably smooth and homogeneous, and quartz crystal microbalance with dissipation monitoring (QCM-D) solvent exchange experiments demonstrated that chitin NC films have twice as much water as amorphous regenerated chitin (RChitin) films of similar thickness. QCM-D data also showed that chitinase-catalyzed hydrolysis of chitin NC films was much slower than that of RChitin films. Chitinase not only degraded, but also caused the swelling of the chitin nanocrystals. BSA adsorption studies demonstrated that chitin NC films have high protein loading capacity, and thus show potential applications for enzyme immobilization., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

This work highlights a real-time and label-free method to monitor the dehydrogenative polymerization of monolignols initiated by horseradish peroxidase (HRP) physically immobilized on surfaces using a quartz crystal microbalance with dissipation monitoring (QCM-D). The dehydrogenative polymer (DHP) films are expected to provide good model substrates for studying ligninolytic enzymes. The HRP was adsorbed onto gold or silica surfaces or onto and within porous desulfated nanocrystalline cellulose films from an aqueous solution. Surface-immobilized HRP retained its activity and selectivity for monolignols as coniferyl and p-coumaryl alcohol underwent dehydrogenative polymerization in the presence of hydrogen peroxide, whereas sinapyl alcohol polymerization required the addition of a nucleophile. The morphologies of the DHP layers on the surfaces were investigated via atomic force microscopy (AFM). Data from QCM-D and AFM showed that the surface-immobilized HRP-initiated dehydrogenative polymerization of monolignols was greatly affected by the support surface, monolignol concentration, hydrogen peroxide concentration, and temperature.

Chitinases are widely distributed in nature and have wide-ranging pharmaceutical and biotechnological applications. This work highlights a real-time and label-free method to assay Chitinase activity via a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). The chitin substrate was prepared by spincoating a trimethylsilyl chitin solution onto a silica substrate, followed by regeneration to amorphous chitin (RChi). The QCM-D and AFM results clearly showed that the hydrolysis rate of RChi films increased as Chitinase (from Streptomyces griseus) concentrations increased, and the optimal temperature and pH for Chitinase activity were around 37 °C and 6-8, respectively. The Chitinase showed greater activity on chitin substrates, having a high degree of acetylation, than on chitosan substrates, having a low degree of acetylation.

The jasmonate family of phytohormones plays central roles in plant development and stress acclimation. However, the architecture of their signaling circuits remains largely unknown. Here we describe a jasmonate family binding protein, cyclophilin 20-3 (CYP20-3), which regulates stress-responsive cellular redox homeostasis. (+)-12-Oxo-phytodienoic acid (OPDA) binding promotes CYP20-3 to form a complex with serine acetyltransferase 1, which triggers the formation of a hetero-oligomeric cysteine synthase complex with O-acetylserine(thiol)lyase B in chloroplasts. The cysteine synthase complex formation then activates sulfur assimilation that leads to increased levels of thiol metabolites and the buildup of cellular reduction potential. The enhanced redox capacity in turn coordinates the expression of a subset of OPDA-responsive genes. Thus, we conclude that CYP20-3 is a key effector protein that links OPDA signaling to amino acid biosynthesis and cellular redox homeostasis in stress responses.

Pretreatment of lignocellulosic biomass with sulfuric acid may leave sulfate groups on its surface that may hinder its biochemical conversion. This study investigates the effects of sulfate groups on cellulase adsorption onto cellulose substrates and the enzymatic hydrolysis of these substrates. Substrates with different sulfate group densities were prepared from H2SO4- and HCl-hydrolyzed and partially and fully desulfated cellulose nanocrystals. Adsorption onto and hydrolysis of the substrates was analyzed by quartz crystal microbalance with dissipation monitoring (QCM-D). The surface roughness of the substrates, measured by atomic force microscopy, increased with decreasing sulfate group density, but their surface accessibilities, measured by QCM-D H2O/D2O exchange experiments, were similar. The adsorption of cellulose binding domains onto sulfated substrates decreased with increasing sulfate group density, but the adsorption of cellulases increased. The rate of hydrolysis of sulfated substrates decreased with increasing sulfate group density. The results indicated an inhibitory effect of sulfate groups on the enzymatic hydrolysis of cellulose, possibly due to nonproductive binding of the cellulases onto the substrates through electrostatic interactions instead of their cellulose binding domains.

We demonstrate that increasing the hydrophobic environment around the charge center of a polyelectrolyte (PE) not only decreases the water content of an adsorbed PE layer but can even dewater up to ~50% of an initially hydrated substrate. The results of this work are expected to yield new stratagies to dewater PE systems and have potential applications in mineral recovery, paper manufacturing, and biomedical materials. Adsorption of a series of cationically derivatized dextran polyelectrolytes onto sulfated nanocrystalline cellulose (SNC) has been studied using quartz crystal microbalance with dissipation monitoring (QCM-D) and surface plasmon resonance (SPR). Synthesized samples of (N,N-dimethylamino)ethyldextran (DMAE-Dex), (N,N-diethylamino)ethyldextran (DEAE-Dex), and (N,N-diisopropylamino)ethyldextran (DIAE-Dex) had degrees of substitution (DS) ranging from 0.05 to 0.82. DMAE-Dex, DEAE-Dex, and DIAE-Dex all showed decreasing adsorption onto SNC and decreasing water content of the adsorbed film with increasing DS. Additionally, DEAE-Dex and DIAE-Dex films adsorbed onto SNC contained less water than DMAE-Dex films with the same DS. Interestingly, QCM-D results for high DS DIAE-Dex adsorbed onto SNC revealed mass loss, whereas SPR results clearly showed DIAE-Dex adsorbed. These observations were consistent with dehydration of the SNC substrate. This study indicates that the water content of the substrate could be tailored by controlling the DS and hydrophobic character of the adsorbed polyelectrolytes.

A study of the interaction of four endoglucanases with amorphous cellulose films by neutron reflectometry (NR) and quartz crystal microbalance with dissipation monitoring (QCM-D) is reported. The endoglucanases include a mesophilic fungal endoglucanase (Cel45A from H. insolens), a processive endoglucanase from a marine bacterium (Cel5H from S. degradans ), and two from thermophilic bacteria (Cel9A from A. acidocaldarius and Cel5A from T. maritima ). The use of amorphous cellulose is motivated by the promise of ionic liquid pretreatment as a second generation technology that disrupts the native crystalline structure of cellulose. The endoglucanases displayed highly diverse behavior. Cel45A and Cel5H, which possess carbohydrate-binding modules (CBMs), penetrated and digested within the bulk of the films to a far greater extent than Cel9A and Cel5A, which lack CBMs. While both Cel45A and Cel5H were active within the bulk of the films, striking differences were observed. With Cel45A, substantial film expansion and interfacial broadening were observed, whereas for Cel5H the film thickness decreased with little interfacial broadening. These results are consistent with Cel45A digesting within the interior of cellulose chains as a classic endoglucanase, and Cel5H digesting predominantly at chain ends consistent with its designation as a processive endoglucanase.

Chitin is the second most abundant biopolymer and insight into its natural synthesis, enzymatic degradation, and chemical interactions with other biopolymers is important for bioengineering with this renewable resource. This work is the first report of smooth, homogeneous, ultrathin chitin films, opening the door to surface studies of binding interactions, adsorption kinetics, and enzymatic degradation. The chitin films were formed by spincoating trimethylsilyl chitin onto gold or silica substrates, followed by regeneration to a chitin film. Infrared and X-ray photoelectron spectroscopy, X-ray diffraction, ellipsometry, and atomic force microscopy were used to confirm the formation of smooth, homogeneous, and amorphous chitin thin films. Quartz crystal microbalance with dissipation monitoring (QCM-D) solvent exchange experiments showed these films swelled with 49% water by mass. The utility of these chitin films as biosensors was evident from QCM-D and surface plasmon resonance studies that revealed the adsorption of a bovine serum albumin monolayer.

Model cellulose surfaces have attracted increasing attention for studying interactions with cell wall matrix polymers and as substrates for enzymatic degradation studies. Quartz crystal microbalance with dissipation monitoring (QCM-D) solvent exchange studies showed that the water content of regenerated cellulose (RC) films was proportional to the film thickness (d) and was consistent with about five water molecules per anhydroglucose unit. Sulfated nanocrystalline cellulose (SNC) and desulfated nanocrystalline cellulose (DNC) films had comparable water contents and contained about five times more water than RC films. A cellulase mixture served as a probe for studies of substrate accessibility and degradation. Cellulase adsorption onto RC films was independent of d, whereas degradation times increased with d. However, adsorption onto SNC and DNC films increased with d, whereas cellulase degradation times for DNC films were independent of studied d. Enhanced access to guest molecules for SNC and DNC films revealed they are more porous than RC films.

Adsorption of anionic polyelectrolytes, sodium salts of carboxymethyl celluloses (CMCs) with different degrees of substitution (DS = 0.9 and 1.2), from aqueous electrolyte solutions onto regenerated cellulose surfaces was studied using quartz crystal microbalance with dissipation monitoring (QCM-D) and surface plasmon resonance (SPR) experiments. The influence of both calcium chloride (CaCl(2)) and sodium chloride (NaCl) on CMC adsorption was examined. The QCM-D results demonstrated that CaCl(2) (divalent cation) caused significantly greater CMC adsorption onto regenerated cellulose surfaces than NaCl (monovalent cation) at the same ionic strength. The CMC layers adsorbed onto regenerated cellulose surfaces from CaCl(2) solutions exhibited greater stability upon exposure to flowing water than layers adsorbed from NaCl solutions. Both QCM-D and SPR results showed that CMC adsorption onto regenerated cellulose surfaces from CaCl(2) solutions increased with increasing CaCl(2) concentration up to the solubility limit (10 mM). Voigt-based viscoelastic modeling of the QCM-D data indicated that the CMC layers adsorbed onto regenerated cellulose surfaces had shear viscosities of η(f) ≈ 10(-3) N·s·m(-2) and elastic shear moduli of μ(f) ≈ 10(5) N·m(-2). Furthermore, the combination of SPR spectroscopy and QCM-D showed that the CMC layers contained 90-95% water. Adsorption isotherms for CMCs in CaCl(2) solutions were also obtained from QCM-D and were fit by Freundlich isotherms. This study demonstrated that CMC adsorption from CaCl(2) solutions is useful for the modification of cellulose surfaces.

Improving the efficiency of enzymatic hydrolysis of cellulose is one of the key technological hurdles to reduce the cost of producing ethanol and other transportation fuels from lignocellulosic material. A better understanding of how soluble enzymes interact with insoluble cellulose will aid in the design of more efficient enzyme systems. We report a study involving neutron reflectometry (NR) and quartz crystal microbalance with dissipation monitoring (QCM-D) of the interaction of a fungal enzyme extract ( T. viride ) and an endoglucanse from A. niger with amorphous cellulose films. The use of amorphous cellulose is motivated by that the fact that several biomass pretreatments currently under investigation disrupt the native crystalline structure of cellulose and increase the amorphous content. NR reveals the profile of water through the film at nanometer resolution and is highly sensitive to interfacial roughness, whereas QCM-D provides changes in mass and film stiffness. NR can be performed using either H(2)O- or D(2)O-based aqueous reservoirs. NR measurement of swelling of a cellulose film in D(2)O and in H(2)O revealed that D/H exchange on the cellulose chains must be taken into account when a D(2)O-based reservoir is used. The results also show that cellulose films swell slightly more in D(2)O than in H(2)O. Regarding enzymatic digestion, at 20 °C in H(2)O buffer the T. viride cocktail rapidly digested the entire film, initially roughening the surface, followed by penetration and activity throughout the bulk of the film. In contrast, over the same time period, the endoglucanase was active mainly at the surface of the film and did not increase the surface roughness.

Homologous dicarboxyl dendritic amphiphiles-RCONHC(CH(3))(CH(2)CH(2)COOH)(2), 4(n); and ROCONHC(CH(3))(CH(2)CH(2)COOH)(2), 5(n), where R=n-C(n)H(2)(n)(+1) and n=13-22 carbon atoms-were synthesized. Critical micelle concentrations (CMCs) in aqueous triethanolamine solutions and at pH 7.4 were measured along with hemolytic activity (effective concentrations, EC(10)) in phosphate-buffered saline (PBS). LogCMC showed a linear dependence on chain length (n); the longest chain in each series had the lowest CMC-in triethanolamine: 4(21), 180μM and 5(22), 74μM and at pH 7.4: 4(21), 78μM and 5(22), 33μM. These two series, 4(n) and 5(n), and three series of homologous tricarboxyl dendritic amphiphiles-RCONHC(CH(2)CH(2)COOH)(3), 1(n); ROCONHC(CH(2)CH(2)COOH)(3), 2(n); RNHCONHC(CH(2)CH(2)COOH)(3), 3(n), where R=n-C(n)H(2)(n)(+1) and n=13-22 carbon atoms-were tested for growth inhibition of Staphylococcus aureus strain ATCC 6358 and methicillin-resistant S. aureus (MRSA) strain ATCC 43330 by microdilution in 0.1-strength brain heart infusion broth (BHIB). Amphiphiles 4(19), 4(21), 5(18), and 5(20) showed the strongest antibacterial activity (2.2-3.4μg/mL) against S. aureus (vancomycin, MIC=0.25μg/mL). These four plus 1(21), 2(20), 2(22), and 3(20) exhibited the strongest antibacterial activity (1.7-6.8μg/mL) against MRSA (vancomycin, MIC=0.25μg/mL). The MICs of these amphiphiles against six clinical MRSA were similar to those against the ATCC strain. In PBS, EC(10)s of the most active homologues ranged from 7 to 18μg/mL and 18 to 220μg/mL for di- and tricarboxyl dendritic amphiphiles, respectively. To assess the potential safety of using dendritic amphiphiles as drugs, measurements of micellar and hemolytic properties were conducted in the same medium (full-strength BHIB) that was used for antibacterial activity. The CMCs (9-36μg/mL, ∼18-72μM) of ten amphiphiles were measured by microdilution (log2 progression) with dye-covered beads. The EC(10)s were similar to those in PBS. The MICs of most amphiphiles (14-72μg/mL) and vancomycin (1.1-2.2μg/mL) against both S. aureus and MRSA increased significantly compared to the MICs measured in 0.1-strength BHIB. The one exception, 5(18), had an MIC against S. aureus of 1.1μg/mL compared to vancomycin (2.2μg/mL). With CMC (9-18μg/mL) and EC(10) (16μg/mL) values higher than the MIC, 5(18) was discovered as a lead for further development., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Cellulose nanocrystals (CNCs) prepared by H(2)SO(4) hydrolysis have sulfate groups on their surface, which have negative implications for some CNC applications. In this study, two desulfation methods were evaluated, and the properties of desulfated CNCs were compared to those of unsulfated CNCs, prepared by HCl hydrolysis. H(2)SO(4)-hydrolyzed CNCs from softwood sulfite pulp were subjected to either a mild acid hydrolytic desulfation or a solvolytic desulfation in dimethyl sulfoxide via the pyridinium salt. Removal of the sulfate groups was confirmed by conductometric titration and X-ray photoelectron spectroscopy. The effect of the desulfation procedure on the lateral crystallite dimensions was analyzed by X-ray diffraction. The extent of particle aggregation in the samples was assessed by atomic force microscopy and dynamic light scattering. The acid hydrolytic method achieved only partial desulfation and produced gradually decreasing sulfate contents upon successive repetition. The solvolytic method achieved nearly complete desulfation in a single step. The desulfated CNCs showed similar particle aggregation as the HCl-hydrolyzed CNCs, but the extent of aggregation was slightly less.

Surface plasmon resonance studies showed pullulan cinnamates (PCs) with varying degrees of substitution (DS) adsorbed onto regenerated cellulose surfaces from aqueous solutions below their critical aggregation concentrations. Results on cellulose were compared to PC adsorption onto hydrophilic and hydrophobic self-assembled thiol monolayers (SAMs) on gold to probe how different interactions affected PC adsorption. PC adsorbed onto methyl-terminated SAMs (SAM-CH(3)) > cellulose > hydroxyl-terminated SAMs (SAM-OH) for high DS and increased with DS for each surface. Data for PC adsorption onto cellulose and SAM-OH surfaces were effectively fit by Langmuir isotherms; however, Freundlich isotherms were required to fit PC adsorption isotherms for SAM-CH(3) surfaces. Atomic force microscopy images from the solid/liquid interfaces revealed PC coatings were uniform with surface roughnesses <2 nm for all surfaces. This study revealed hydrogen bonding alone could not explain PC adsorption onto cellulose and hydrophobic modification of water-soluble polysaccharides was a facile strategy for their conversion into surface modifying agents.

Trisilanol polyhedral oligomeric silsesquioxane (POSS) derivatives have recently been reported as a new class of amphiphilic molecules that form stable Langmuir monolayers at the air/water interface and exhibit interesting phase transitions and aggregation behavior. In this letter, surface light scattering (SLS) has been used to probe the dilational viscoelastic behavior of trisilanolisobutyl-POSS in the monolayer regime of its surface pressure-area per molecule isotherm at 22.5 degrees C. Results showed that the static dilational elastic modulus is in excellent agreement with the dynamic dilational elastic modulus in the monolayer regime over the limited wavevector range of 404.3-512.6 cm(-1). The films possessed a moderate maximum dynamic dilational elastic modulus (approximately 50 mN.m(-1)) prior to film collapse. Moreover, the films exhibited small surface viscosities such that the films are almost purely elastic over the frequency range studied throughout the monolayer regime.

A new magnetic resonance imaging (MRI) contrast agent based on the trimetallic nitride templated (TNT) metallofullerene Gd(3)N@C(80) was synthesized by a facile method in high yield. The observed longitudinal and transverse relaxivities r(1) and r(2) for water hydrogens in the presence of the water-soluble gadofullerene 2 Gd(3)N@C(80)(OH)(approximately 26)(CH(2)CH(2)COOM)(approximately 16) (M = Na or H) are 207 and 282 mM(-1) s(-1) (per C(80) cage) at 2.4 T, respectively; these values are 50 times larger than those of Gd(3+) poly(aminocarboxylate) complexes, such as commercial Omniscan and Magnevist. This high (1)H relaxivity for this new hydroxylated and carboxylated gadofullerene derivative provides high signal enhancement at significantly lower Gd concentration as demonstrated by in vitro and in vivo MRI studies. Dynamic light scattering data reveal a unimodal size distribution with an average hydrodynamic radius of ca. 78 nm in pure water (pH = 7), which is significantly different from other hydroxylated or carboxylated fullerene and metallofullerene derivatives reported to date. Agarose gel infusion results indicate that the gadofullerene 2 displayed diffusion properties different from those of commercial Omniscan and those of PEG5000 modified Gd(3)N@C(80). The reactive carboxyl functionality present on this highly efficient contrast agent may also serve as a precursor for biomarker tissue-targeting purposes.

The self-assembly of thiophene-containing dextran and cyclodextrin derivatives on gold surfaces was investigated. Morphological studies (AFM) and the elemental characterization (XPS) of the surfaces show that the carbohydrate derivatives form either aggregates or uniform films depending on the structure and the solvent used. The real coverage of the surface, and hence the amount of unmodified free gold, was examined by a "titration" of the surface with a carboxyl-terminated SAM (11-mercaptoundecanoic acid, MUA) and with Mn-12, a manganese oxocluster. Each carboxyl group reacts with one acetate ligand of the manganese cluster, with each Mn-12 cluster capable of binding multiple MUAs, leading to defined manganese-functionalized surfaces. The weight percentage of manganese and consequently the coverage area of the carboxyl-terminated SAM is examined by XPS.

Three series of homologous dendritic amphiphiles--RCONHC(CH(2)CH(2)COOH)(3), 1(n); ROCONHC(CH(2)CH(2)COOH)(3), 2(n); RNHCONHC(CH(2)CH(2)COOH)(3), 3(n), where R = n-C(n)H(2n+1) and n = 13-22 carbon atoms--were assayed for their potential to serve as antimicrobial components in a topical vaginal formulation. Comparing epithelial cytotoxicities to the ability of these homologues to inhibit HIV, Neisseria gonorrhoeae, and Candida albicans provided a measure of their prophylactic/therapeutic potential. Measurements of the ability to inhibit Lactobacillus plantarum, a beneficial bacterium in the vagina, and critical micelle concentrations (CMCs), an indicator of the potential detergency of these amphiphiles, provided additional assessments of safety. Several amphiphiles from each homologous series had modest anti-HIV activity (EC(50) = 110-130 microM). Amphiphile 2(18) had the best anti-Neisseria activity (MIC =65 microM), while 1(19) and 1(21) had MICs against C. albicans of 16 and 7.7 microM, respectively. Two measures of safety showed promise as all compounds had relatively low cytotoxic activity (EC(50) = 210-940 microM) against epithelial cells and low activity against L. plantarum, 1(n), 2(n), and 3(n) had MICs490, 1300, and 940 microM, respectively. CMCs measured in aqueous triethanolamine and in aqueous potassium hydroxide showed linear dependences on chain length. As expected, the longest chain in each series had the lowest CMC-in triethanolamine: 1(21), 1500 microM; 2(22), 320 microM; 3(22), 340 microM, and in potassium hydroxide: 1(21), 130 microM; 3(22), 40 microM. The CMC in triethanolamine adjusted to pH 7.4 was 400 microM for 1(21) and 3900 microM for 3(16). The promising antifungal activity, low activity against L. plantarum, relatively high CMCs, and modest epithelial cytotoxicity in addition to their anti-Neisseria properties warrant further design studies with dendritic amphiphiles to improve their safety indices to produce suitable candidates for antimicrobial vaginal products.

Phase separation in thin film blends of poly(tert-butyl acrylate) (PtBA) and a polyhedral oligomeric silsesquioxane (POSS), trisilanolphenyl-POSS (TPP), is studied as functions of annealing temperature and time, using reflected light optical microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy. The results demonstrate that the PtBA/TPP blend system confined to thin films ( approximately 90 nm) exhibits lower critical solution temperature (LCST) behavior with a critical temperature of approximately 70 degrees C and a critical composition of 60 wt % PtBA with insignificant dewetting at the phase boundary. Off-critical spinodal behavior is observed for 58 and 62 wt % PtBA blend films. Phase separation by nucleation and growth is observed for all compositions outside the window between 58 and 62 wt % PtBA. The temporal evolution of spinodal decomposition in 60 wt % PtBA blend films is explored at annealing temperatures of 75, 85, 95, and 105 degrees C. The morphological evolution in 60 wt % PtBA blend films is similar for all experimental temperatures (75, 85, 95, and 105 degrees C) with the expected shorter time scales for phase evolution at higher annealing temperatures. Fast Fourier transforms of optical micrographs reveal that these blend films immediately undergo phase separation by spinodal decomposition during temperature jump experiments. Power law scaling for the characteristic wavevector with time (q approximately t(n) with n approximately -1/4 to -1/3) for domain growth during the early stages of phase separation yields to domain pinning at the later stages for 60 wt % PtBA blend films annealed at 75, 85, and 95 degrees C. In contrast, domain growth is pinned over the entire experimental time scale for 60 wt % PtBA blend films annealed at 105 degrees C.

Morphological evolution in dewetting thin film bilayers of polystyrene (PS) and a polyhedral oligomeric silsesquioxane (POSS), trisilanolphenyl-POSS (TPP), was studied as a function of annealing temperature and annealing time. The results demonstrate unique dewetting morphologies in PS/TPP bilayers at elevated temperatures that are significantly different from those typically observed in dewetting polymer/polymer bilayers. During temperature ramp studies by optical microscopy (OM) in the reflection mode, PS/TPP bilayers form cracks with a weak optical contrast at approximately 130 degrees C. The crack formation is attributed to tensile stresses within the upper TPP layer. The weak optical contrast of the cracks observed in the bilayers for annealing temperatures below approximately 160 degrees C is consistent with the cracking and dewetting of only the upper TPP layer from the underlying PS layer. The optical contrast of the morphological features is significantly enhanced at annealing temperatures of >160 degrees C. This observation suggests dewetting of both the upper TPP and the lower PS layers that results in the exposure of the silicon substrate. Upon annealing the PS/TPP bilayers at 200 degrees C in a temperature jump experiment, the upper TPP layer undergoes instantaneous cracking as observed by OM. These cracks in the upper TPP layer serve as nucleation sites for rapid dewetting and aggregation of the TPP layer, as revealed by OM and atomic force microscopy (AFM). X-ray photoelectron spectroscopy (XPS) results indicated that dewetting of the lower PS layer ensued for annealing times >5 min and progressed up to 90 min. For annealing times >90 min, OM, AFM, and XPS results revealed complete dewetting of both the layers with the formation of TPP encapsulated PS droplets.

Newkome-type, 1-->3 C-branched dendrons make an excellent headgroup for amphiphiles with ultralong, saturated, linear alkyl chains. Synthesis of a homologous series of five such amphiphiles from 14 to 22 carbons-RNHCONHC(CH2CH2CO2H)3, R = n-CnH2n+1, n = 14, 16, 18, 20, 22-proceeds readily. These amphiphiles are soluble in aqueous solutions of triethanolamine. Surface-tension measurements on this homologous series reveal an unusually gradual decrease in log critical micelle concentration (CMC) as the chain length increases. In fact, the tetradecyl homologue does not appear to form micelles. Further, measurements of minimal inhibitory concentration (MIC) by broth microdilution against Mycobacterium smegmatis as a function of the initial cell density provide a direct measure of the intrinsic activity (MIC0) of each homologue. The hexadecyl homologue is the most active at inhibiting growth with an MIC0 equal to 3.5 x 10-5 M, which is 100-fold below the CMC.

Poly(epsilon-caprolactone) (PCL) samples with number average molar masses (Mn) ranging from 3.5 to 36 kg.mol-1 exhibit molar mass dependent nucleation and growth of crystals, crystal morphologies, and melting properties at a temperature of 22.5 degrees C in Langmuir films at the air/water (A/W) interface. At surface area per monomer, A, greater than approximately 0.37 nm2.monomer-1, surface pressure, Pi, and surface elasticity exhibit molar mass independent behavior that is consistent with a semidilute PCL monolayer. In this regime, the scaling exponent indicates that the A/W interface is a good solvent for the liquid-expanded PCL monolayers. Pi-A isotherms show molar mass dependent behavior in the vicinity of the collapse transition, i.e., the supersaturated monolayer state, corresponding to the onset of the nucleation of crystals. Molar mass dependent morphological features for PCL crystals and their subsequent crystal melting are studied by in situ Brewster angle microscopy during hysteresis experiments. The competition between lower segmental mobility and a greater degree of undercooling with increasing molar mass produces a maximum average growth rate at intermediate molar mass. This behavior is analogous to spherulitic growth in bulk PCL melts. The plateau regions in the expansion isotherms represent the melting process, where the polymer chains continuously return to the monolayer state. The magnitude of Pi for the plateau during expansion decreases with increasing molar mass, indicating that the melting process is strongly molar mass dependent.

Poly(epsilon-caprolactone)/polystyrene (PCL/PS) blends, where nonamphiphilic PS is glassy in the bulk state at the experimental temperature of 22.5 degrees C, are immiscible as Langmuir films at the air/water (A/W) interface. Surface pressure-area per monomer isotherm analyses indicate that the surface concentration of amphiphilic PCL is the only factor influencing the surface pressure below the collapse transition. For PS-rich blends, Brewster angle microscopy (BAM) studies at the A/W interface and atomic force microscopy studies on Langmuir-Schaefer films reveal that PS nanoparticle aggregates formed at very low surface pressures can form networks upon further compression. The morphologies seen in PS-rich blends (networklike rings) are consistent with a recent study of a nonamphiphilic polyhedral oligomeric silsesquioxane (POSS), octaisobutyl-POSS, blended with amphiphilic poly(dimethylsiloxane), suggesting that the nonamphiphilic PS aggregates at the A/W interface produce domains with dipole densities that differ from that of pure PCL. In all composition regimes, the amphiphilic PCL phase tends to spread and form a continuous surface layer at the A/W interface, while simultaneously improving the dispersion of nonamphiphilic PS domains. During film expansion, BAM images show a gradual change in the surface morphology from highly continuous networklike structures (PS-rich blends) to broken ringlike structures (intermediate composition) to small discontinuous aggregates (PCL-rich blends). This study provides valuable information on the morphological evolution of semicrystalline PCL-based polymer blends confined in a "two-dimensional" geometry at the A/W interface and fundamental insight into the influence of microstructure (domain size, phase-separated structures, crystalline morphology, etc.) on the interfacial properties of blends as Langmuir films.

The surface morphology of dewetting poly(tert-butyl acrylate) (PtBA) and trisilanolphenyl-POSS (TPP) bilayers has been studied as a function of time at 95 degrees C. For short annealing times, only the upper nanoparticle (TPP) layer dewets from the underlying PtBA layer. The number and lateral dimensions of the holes in the upper TPP layer increase with increasing annealing times, forming interconnected rim structures. At later annealing times, scattered holes that reach down into the PtBA layer are observed among the interconnected rim structures. Fractal nanofiller (TPP)-rich aggregates are found at the bottom of the scattered holes.

Atomic force microscopy, reflection absorption infrared spectroscopy, and X-ray reflectivity studies reveal that poly(L-lactic acid) molecules in Langmuir-Blodgett (LB) films exist as 10(3) helices over nearly the entire length of the polymer chain. This feature gives rise to LB films with highly ordered nanoscale smectic liquid crystalline-like surface patterns with low surface roughness and lamellar spacings that scale with molar mass. These studies provide a new approach for controlling surface morphology with a biodegradable polymer commonly used for drug delivery and tissue engineering.

Surface pressure-induced crystallization of poly(epsilon-caprolactone) (PCL) from a metastable region of the surface pressure-area per monomer (Pi-A) isotherm in Langmuir monolayers at the air/water (A/W) interface has been captured in real time by Brewster angle microscopy (BAM). Morphological features of PCL crystals grown in Langmuir films during the compression process exhibit four fully developed faces and two distorted faces. During expansion of the crystallized film, polymer chains slowly detach from the crystalline domains and diffuse back into the monolayer as the crystals "melt". Typical diffusion-controlled morphologies are revealed by BAM during the melting process as the secondary dendrites melt away faster, that is, at a higher surface pressure than the principal axes. Electron diffraction on Langmuir-Schaefer films suggests that the lamellar crystals are oriented with the polymer chain axes perpendicular to the substrate surface, while atomic force microscopy reveals a crystal thickness of approximately 7.6 nm.

Surface pressure-area per monomer (pi-A) isotherms show that poly(L-lactic acid) (PLLA) Langmuir monolayers exhibit a liquid expanded-to-condensed (LE/LC) phase transition at low surface pressure. Brewster angle microscopy images show circular domains where the LC phase is surrounded by the LE phase during phase coexistence. Morphology studies via atomic force microscopy show that well-ordered patterns are only observed for Langmuir-Blodgett films prepared in the LC phase, while no ordered features are observed in the LE phase. The morphological differences confirm that during the LE/LC phase transition PLLA molecules form well-ordered structures at the air/water interface. Analysis by the two-dimensional Clausius-Clapeyron equation is used to predict the critical parameters (X(c)). Both critical parameters, the critical temperature (T(c)) and the critical pressure (pi(c)), increase with increasing number average molar mass (M(n)) as X(c) = X(c,infinity) - KM(n)(-1), where X(c,infinity) is the value of the critical parameter at infinite molar mass and K is a constant. For PLLA T(c,infinity) = 36.2 +/- 0.3 degrees C and pi(c,infinity) = 4.53 +/- 0.06 mN x m(-1). This study provides a model polymer system for examining critical behavior in two dimensions.

The room-temperature uptake and reactivity of gas-phase methyl dichlorophosphate (MDCP) and trichlorophosphate (TCP) within trisilanolphenyl-polyhedral oligomeric silsesquioxane (POSS) Langmuir-Blodgett films are investigated. The halogenated phosphate molecules are found to readily diffuse into and react with the hybrid inorganic-organic silicon-oxide films under ambient conditions. Reflection absorption infrared spectroscopy (RAIRS), X-ray photoelectron spectroscopy (XPS), and fast atom bombardment-mass spectrometry (FAB-MS) measurements suggest that the chlorophosphates undergo hydrolysis with the silanol groups of the POSS LB-film. Substitution and elimination reactions appear to cap the corner of the POSS molecules, leaving a surface-bound phosphoryl group and a resulting structure that is highly stable at elevated temperatures.

Trisilanolphenyl polyhedral oligomeric silsesquioxane (POSS) molecules are used to create well-ordered Langmuir-Blodgett films containing silanol groups that interact strongly with dimethyl methylphosphonate (DMMP), a commonly used simulant for the chemical warfare agent sarin. The interaction of DMMP within multilayer POSS films is studied by uptake coefficient and temperature-programmed desorption (TPD) measurements, as well as reflection-absorption infrared spectroscopy (RAIRS). Results indicate a low uptake probability; however, in a DMMP-saturated atmosphere, the organophosphonate molecules are capable of diffusing into and adsorbing within the films. TPD and RAIRS measurements reveal no evidence of DMMP decomposition within the film. Rather, DMMP is found to desorb molecularly with a desorption energy of 122 kJ/mol. RAIRS reveals that strong hydrogen-bonding interactions between the phosphoryl groups of the organophosphonate molecules and the silanol groups of the POSS molecules are responsible for the high sorption energy of the system.

A trisilanol polyhedral oligomeric silsesquioxane (POSS), trisilanolcyclohexyl-POSS (TCyP), has recently been reported to undergo a series of phase transitions from traditional Langmuir monolayers to unique rodlike hydrophobic aggregates in multilayer films that are different from "collapsed" morphologies seen in other systems at the air/water interface. This paper focuses on the phase transitions and morphology of films varying in average thickness from monolayers to trilayers and the corresponding viscoelastic properties of trisilanolcyclohexyl-POSS molecules at the air/water interface by means of surface pressure-area per molecule (Pi-A) isotherms, Brewster angle microscopy (BAM), and interfacial stress rheometry (ISR) measurements. The morphology studies by BAM reveal that the TCyP monolayer can collapse into different 3D structures by homogeneous or heterogeneous nucleation mechanisms. For homogeneous nucleation, analysis by Vollhardt et al.'s nucleation and growth model reveals that TCyP collapse is consistent with instantaneous nucleation with hemispherical edge growth at Pi = 3.7 mN.m(-1). Both surface storage (Gs') and loss (Gs") moduli obtained by ISR reveal three different non-Newtonian flow regimes that correlate with phase transitions in the Pi-A isotherms: (A) A viscous liquidlike "monolayer"; (B) a "biphasic regime"between a liquidlike viscous monolayer and a more rigid trilayer; and (C) an elastic solidlike "trilayer". These observations provide interesting insights into collapse mechanisms and structures in Langmuir films.

Brewster angle microscopy (BAM) shows that a nonamphiphilic polyhedral oligomeric silsesquioxane (POSS) nanofiller, octaisobutyl-POSS, forms aggregates at all surface concentrations at the air/water interface. When amphiphilic poly(dimethylsiloxane) (PDMS) is blended with the octaisobutyl-POSS (>10 wt % PDMS), the degree of POSS aggregation dramatically decreases. Thermodynamic analyses and morphology studies through surface pressure-area per monomer isotherm data and BAM, respectively, exhibit three distinct composition regimes: (1) Blends with >70 wt % POSS have unstable isotherms whose shapes deviate from those of PDMS and form large rigid domains comparable to but smaller than pure, octaisobutyl-POSS films. (2) At compositions between approximately 40 and 70 wt % POSS, the isotherms' features are qualitatively similar to those of pure PDMS, and extensive nanofiller "networks" are observed by BAM. (3) For compositions < or = approximately 30 wt % POSS, the isotherms are essentially those of pure PDMS with small POSS domains dispersed in the PDMS matrix. These results provide further insight into nanofiller aggregation mechanisms and dispersion that may be present in thicker films and bulk systems.

Mixtures of a polyhedral oligomeric silsesquioxane, trisilanolisobutyl-POSS, and a polar silicone, poly(dimethyl-co-methylvinyl-co-methyl, 2-diphenyl phosphine oxide ethyl) siloxane (PDMS-PO), spread as Langmuir monolayers at the air/water interface are used to examine the surface phase behavior and aggregation of trisilanolisobutyl-POSS as a function of silicone composition. Analyses of the surface pressure-area per monomer (Pi-A) isotherms in terms of the collapse pressures and excess Gibbs free energies of mixing indicate the monolayers form slightly negative deviation mixtures. Direct observations of surface morphology with Brewster angle microscopy in the collapsed regime reveal that the governing factor for aggregation is the collapse Pi of the component with a stronger affinity for water. In trisilanolisobutyl-POSS/PDMS-PO blends, POSS aggregates as discrete domains and does not coalesce into larger aggregates or networklike structures for <80 wt % POSS, a feature that is vastly different from a previous study of POSS blended with regular poly(dimethylsiloxane).

A biomimetic approach was taken for studying the adsorption of a model copolymer (pullulan abietate, DS 0.027), representing the lignin-carbohydrate complex, to a model surface for cellulose fibers (Langmuir-Blodgett thin films of regenerated cellulose). Adsorption results were assayed using surface plasmon resonance spectroscopy (SPR) and atomic force microscopy (AFM). Rapid, spontaneous, and desorption-resistant surface modification resulted. This effort is viewed as a critical first step towards the permanent surface modification of cellulose fibers with a layer of molecules amenable to either enzymatic crosslinking for improved wood composites or thermoplastic consolidation.

A trisilanol derivative of polyhedral oligomeric silsesquioxanes (POSS), trisilanolisobutyl-POSS, has recently been reported to form stable monolayers at the air/water interface. Moreover, the trisilanolisobutyl-POSS monolayer undergoes a nonequilibrium structural transition (collapse) around a surface pressure of Rho approximately 18 mN.m(-1). This paper explores the mono- and multilayer properties of POSS molecules at the air/water interface by the Wilhelmy plate technique and Brewster angle microscopy. Surface concentrations are controlled by four mechanisms: (1) compression at a constant rate, (2) stepwise compression followed by surface pressure relaxation to an "equilibrium" value, (3) successive additions of spreading solution followed by relaxation to a stable surface pressure value, and (4) hysteresis loops to test the reversibility of the structural transitions. Results show that both an increasing compression rate and a decreasing temperature lead to an increase in the surface pressure of the structural transition, which is consistent with the formation of solidlike multilayer domains during the collapse process. For the case of compression at a constant rate, small domains initially form and later aggregate to form large solid masses. Cessation of compression allows these large solid masses to relax into equilibrium ringlike structures with a lower surface pressure, Rho approximately 13 mN.m(-1). In contrast, if the film is expanded rapidly, these large solidlike domains relax into "spaghetti" like networks with a residual surface pressure that depends on the initial amount of the solidlike collapsed phase. Finally, successive addition and stepwise compression isotherm experiments lead to different and time-dependent morphologies. Understanding these surface properties of POSS molecules affords an excellent opportunity to design and study POSS/polymer blends for coating applications where POSS molecules with rigid inorganic cores, soft organic coronae, and dimensions comparable to polymeric monolayers can serve as perfectly monodisperse nanofillers.

Insoluble films of trisilanolisobutyl-POSS and octaisobutyl-POSS at the air/water interface are investigated by means of surface pressure - area per molecule isotherm (Pi - A) and Brewster angle microscopy (BAM). Analysis of the experimental results shows the partial cage molecule, trisilanolisobutyl-POSS, is a surface-active molecule that self-assembles into uniform monolayer upon compression; but the fully condensed cage molecule, octaisobutyl-POSS, is nonamphiphilic.

Posttransfer modification of preformed Langmuir-Blodgett films of poly(tert-butyl methacrylate) and poly(tert-butyl acrylate) by gaseous hydrochloric acid yields films with layered architecture of poly(methacrylic acid) and poly(acrylic acid), respectively. X-ray reflectivity and infrared spectroscopy confirm monolayer by monolayer transfer of the source polymers and their transformation to acid multilayer assemblies with retention of low surface roughnesses. The incorporation of cross-linking groups into the system offers the possibility for further chemical modification to produce ultrathin films of model networks desirable for bioadsorption studies and as hydrophilic spacing layers for tethered membranes.