Search

Background/objectives: Lifitegrast is an effective treatment for dry eye disease, reducing inflammation and improving the ocular surface condition. Owing to its high sensitivity to oxidation and hydrolysis, formulation studies are required to maintain the physicochemical stability of lifitegrast. This study aimed to overcome the instability of lifitegrast by developing a more stable eyedrop formulation by using citric acid and tromethamine to prevent the degradation of lifitegrast., Methods: Based on the Design of Experiment (DoE) approach, formulations were prepared at various concentrations of two stabilizers, citric acid and tromethamine. The stabilizers were carefully controlled to reduce the generation of degradation products. The eyedrops were stored under accelerated test conditions, and parameters such as appearance, pH, drug content, and impurities were evaluated., Results: The results showed that all critical quality attributes (CQAs) including appearance, pH, drug content, and impurities were maintained at stable levels under accelerated conditions, meeting established criteria. In addition, it was suggested that citric acid provided protection against oxidative stress, while tromethamine prevented hydrolysis caused by pH fluctuations., Conclusions: Consequently, it was concluded that the developed lifitegrast-containing eyedrop formulation exhibited improved physicochemical stability, validated through statistical analyses. These findings contribute to the development of stable eyedrops and provide a foundation for commercial production and clinical applications.

In this study, an amorphous solid dispersion containing the poorly water-soluble drug, bisacodyl, was prepared by hot-melt extrusion to enhance its therapeutic efficacy. First, the miscibility and interaction between the drug and polymer were investigated as pre-formulation strategies using various analytical approaches to obtain information for selecting a suitable polymer. Based on the calculation of the Hansen solubility parameter and the identification of the single glass transition temperature (Tg), the miscibility between bisacodyl and all the investigated polymers was confirmed. Additionally, the drug-polymer molecular interaction was identified based on the comprehensive results of dynamic vapor sorption (DVS), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, and a comparison of the predicted and experimental values of Tg. In particular, the hydroxypropyl methylcellulose (HPMC)-based solid dispersions, which exhibited large deviation between the calculated and experimental values of Tg and superior physical stability after DVS experiments, were selected as the most appropriate solubilized bisacodyl formulations due to the excellent inhibitory effects on precipitation based on the results of the non-sink dissolution test. Furthermore, it was shown that the enteric-coated tablets containing HPMC-bisacodyl at a 1:4 ratio ( w / w ) had significantly improved in vivo therapeutic laxative efficacy compared to preparations containing un-solubilized raw bisacodyl in constipation-induced rabbits. Therefore, it was concluded that the pre-formulation strategy, using several analyses and approaches, was successfully applied in this study to investigate the miscibility and interaction of drug-polymer systems, hence resulting in the manufacture of favorable solid dispersions with favorable in vitro and in vivo performances using hot-melt extrusion processes.

Nanoplastics (NPs) exposure to humans can occur through various routes, including the food chain, drinking water, skin contact, and respiration. NPs are plastics with a diameter of less than 100 nm and have the potential to accumulate in tissues, leading to toxic effects. This study aimed to investigate the neurotoxicity of polystyrene NPs on neural progenitor cells (NPCs) and hippocampal neurogenesis in a rodent model. Toxicity screening of polystyrene NPs based on their charge revealed that cationic amine-modified polystyrene (PS-NH 3 + ) exhibited cytotoxicity, while anionic carboxylate-modified polystyrene (PS-COO - ) and neutral NPs (PS) did not. NPCs treated with PS-NH 3 + showed a significant reduction in growth rate due to G1 cell cycle arrest. PS-NH 3 + increased the expression of cell cycle arrest markers p21 and p27, while decreasing cyclin D expression in NPCs. Interestingly, PS-NH 3 + accumulated in mitochondria, leading to mitochondrial dysfunction and energy depletion, which caused G1 cell cycle arrest. Prolonged exposure to PS-NH 3 + in C17.2 NPCs increased the expression of p16 and senescence-associated secretory phenotype factors, indicating cellular senescence. In vivo studies using C57BL/6 mice demonstrated impaired hippocampal neurogenesis and memory retention after 10 days of PS-NH 3 + administration. This study suggests that NPs could deplete neural stem cell pools in the brain by mitochondrial dysfunction, thereby adversely affecting hippocampal neurogenesis and neurocognitive functions., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2023 Elsevier Inc. All rights reserved.)

Detecting and identifying the origins of foodborne pathogen outbreaks is a challenging. The Next-Generation Sequencing (NGS) panel method offers a potential solution by enabling efficient screening and identification of various bacteria in one reaction. In this study, new NGS panel primer sets that target 18 specific virulence factor genes from six target pathogens ( Bacillus cereus , Yersinia enterocolitica , Staphylococcus aureus , Vibrio cholerae , Vibrio parahaemolyticus , and Vibrio vulnificus ) were developed and optimized. The primer sets were validated for specificity and selectivity through singleplex PCR, confirming the expected amplicon size. Crosscheck and multiplex PCR showed no interference in the primer set or pathogenic DNA mixture. The NGS panel analysis of spiked water samples detected all 18 target genes in a single reaction, with pathogen concentrations ranging from 10 8 to 10 5 colony-forming units (CFUs) per target pathogen. Notably, the total sequence read counts from the virulence factor genes showed a positive association with the CFUs per target pathogen. However, the method exhibited relatively low sensitivity and occasional false positive results at low pathogen concentrations of 10 5 CFUs. To validate the detection and identification results, two sets of quantitative real-time PCR (qPCR) analyses were independently performed on the same spiked water samples, yielding almost the same efficiency and specificity compared to the NGS panel analysis. Comparative statistical analysis and Spearman correlation analysis further supported the similarity of the results by showing a negative association between the NGS panel sequence read counts and qPCR cycle threshold (Ct) values. To enhance NGS panel analysis for better detection, optimization of primer sets and real-time NGS sequencing technology are essential. Nonetheless, this study provides valuable insights into applying NGS panel analysis for multiple foodborne pathogen detection, emphasizing its potential in ensuring food safety., Competing Interests: E-SH, BK, IC, JC, and JP were employed by Sanigen Co., Ltd. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2023 Park, Kwon, Ha, Kang, Choi, Kwak, Choi, Lee, Kim, Kim, Park and Lee.)

These days, bacterial detection methods have some limitations in sensitivity, specificity, and multiple detection. To overcome these, novel detection and identification method is necessary to be developed. Recently, NGS panel method has been suggested to screen, detect, and even identify specific foodborne pathogens in one reaction. In this study, new NGS panel primer sets were developed to target 13 specific virulence factor genes from five types of pathogenic Escherichia coli , Listeria monocytogenes , and Salmonella enterica serovar Typhimurium, respectively. Evaluation of the primer sets using singleplex PCR, crosscheck PCR and multiplex PCR revealed high specificity and selectivity without interference of primers or genomic DNAs. Subsequent NGS panel analysis with six artificially contaminated food samples using those primer sets showed that all target genes were multi-detected in one reaction at 10 8 -10 5 CFU of target strains. However, a few false-positive results were shown at 10 6 -10 5 CFU. To validate this NGS panel analysis, three sets of qPCR analyses were independently performed with the same contaminated food samples, showing the similar specificity and selectivity for detection and identification. While this NGS panel still has some issues for detection and identification of specific foodborne pathogens, it has much more advantages, especially multiple detection and identification in one reaction, and it could be improved by further optimized NGS panel primer sets and even by application of a new real-time NGS sequencing technology. Therefore, this study suggests the efficiency and usability of NGS panel for rapid determination of origin strain in various foodborne outbreaks in one reaction.

This study aimed to develop an improved sustained-release (SR) PLGA microsphere of exenatide using supercritical fluid extraction of emulsions (SFEE). As a translational research, we investigated the effect of various process parameters on the fabrication of exenatide-loaded PLGA microspheres by SFEE (ELPM_SFEE) using the Box-Behnken design (BBD), a design of experiment approach. Further, ELPM obtained under optimized conditions and satisfying all the response criteria were compared with PLGA microspheres prepared using the conventional solvent evaporation (ELPM_SE) method through various solid-state characterizations and in vitro and in vivo evaluations. The four process parameters selected as independent variables were pressure ( X 1 ), temperature ( X 2 ), stirring rate ( X 3 ), and flow ratio ( X 4 ). The effects of these independent variables on five responses, namely the particle size, its distribution (SPAN value), encapsulation efficiency (EE), initial drug burst release (IBR), and residual organic solvent, were evaluated using BBD. Based on the experimental results, a desirable range of combinations of various variables in the SFEE process was determined by graphical optimization. Solid-state characterization and in vitro evaluation revealed that ELPM_SFEE improved properties, including a smaller particle size and SPAN value, higher EE, lower IBR, and lower residual solvent. Furthermore, the pharmacokinetic and pharmacodynamic study results indicated better in vivo efficacy with desirable SR properties, including a reduction in blood glucose levels, weight gain, and food intake, for ELPM_SFEE than those generated using SE. Therefore, the potential drawback of conventional technologies such as the SE for the preparation of injectable SR PLGA microspheres could be improved by optimizing the SFEE process., Competing Interests: The authors declare no conflicts of interest., (© 2023 The Authors. Bioengineering & Translational Medicine published by Wiley Periodicals LLC on behalf of American Institute of Chemical Engineers.)

The emergence of enabling technologies for the analysis of circulating tumor cells has been shedding new lights into cancer management in the recent years. However, majority of the technologies developed suffer from excessive cost, time-consuming workflows, and reliance on specialized equipment and operators. Herein, we propose a simple workflow for the isolation and characterization of single circulating tumor cells using microfluidic devices. The entire process can be operated by a laboratory technician without relying on any microfluidic expertise and can be completed within few hours of sample collection., (© 2023. The Author(s), under exclusive license to Springer Science+Business Media, LLC, part of Springer Nature.)

Liver cancer is the sixth common cancer and forth cause of cancer-related death worldwide. Based on usually advanced stages of hepatocellular carcinoma (HCC) at the time of diagnosis, therapeutic options are limited and, in many cases, not effective, and typically result in the tumor recurrence with a poor prognosis. Radioimmunotherapy (RIT) offers a selective internal radiation therapy approach using beta or alpha emitting radionuclides conjugated with tumor-specific monoclonal antibodies (mAbs), or specific selective peptides. When compared to chemotherapy or radiotherapy, radiolabeled mAbs against cancer-associated antigens could provide a high therapeutic and exclusive radiation dose for cancerous cells while decreasing the exposure-induced side effects to healthy tissues. The recent advances in cancer immunotherapy, such as blockade of immune-checkpoint inhibitors (ICIs), has changed the landscape of cancer therapy, and the efficacy of different classes of immunotherapy has been tested in many clinical trials. Taking into account the use of ICIs in the liver tumor microenvironment, combined therapies with different approaches may enhance the outcome in the future clinical studies. With the development of novel immunotherapy treatment options in the recent years, there has been a great deal of information about combining the diverse treatment modalities to boost the effectiveness of immunomodulatory drugs. In this opinion review, we will discuss the recent advancements in RIT. The current status of immunotherapy and internal radiotherapy will be updated, and we will propose novel approaches for the combination of both techniques. Potential target antigens for radioimmunotherapy in Hepatocellular carcinoma (HCC). HCC radioimmunotherapy target antigens are the most specific and commonly accessible antigens on the surface of HCC cells. CTLA-4 ligand and receptor, TAMs, PD-1/PD-L, TIM-3, specific IEXs/TEXs, ROBO1, and cluster of differentiation antigens CD105, CD147 could all be used in HCC radioimmunotherapy. Abbreviations: TAMs, tumor-associated macrophages; CTLA-4, cytotoxic T-lymphocyte associated antigen-4; PD-1, Programmed cell death protein 1; PD-L, programmed death-ligand1; TIM-3, T-cell immunoglobulin (Ig) and mucin-domain containing protein-3; IEXs, immune cell-derived exosomes; TEXs, tumor-derived exosomes., (© 2022. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Muscle mass decreases with aging, while the C-C motif chemokine ligand 2 (CCL2) increases with aging; in this context, CCL2 can be considered a potential aging-promoting factor. Thus, CCL2 knockout mice are expected to exhibit anti-aging effects including protection against loss of muscle mass. However, instead, muscle amount and recovery of damaged muscles are decreased in CCL2 knockout mice. Therefore, we hypothesized that increasing CCL2 in the elderly might be related to compensation for loss of muscle mass. To confirm the relationship between muscle and CCL2, we sought to establish the role of CCL2 in C2C12 cells and Human Skeletal Muscle Myoblast (HSMM) cells. The myotube (MT) fusion index increased with CCL2 compared to 5day CCL2 vehicle only (27.0 % increase, P<0.05) in immunocytochemistry staining (ICC) data. CCL2 also restored MTs atrophy caused by dexamethasone (21.8 % increase, P<0.0001). p-mTOR/mTOR and p-AKT/total AKT increased with CCL2 compared to CCL2 vehicle only (18.3 and 30.5% increase respectively, P<0.05) and decreased with CCR2-siRNA compared to CCL2 (38.9 % (P<0.05) and 56.7% (P<0.005) reduction respectively). In conclusion, CCL2 positively affects myogenesis by CCR2 via AKT-mTOR signaling pathways. CCL2 might have potential as a therapeutic target for low muscle mass and muscle recovery.

Colorectal cancer (CRC) is the second leading cause of cancer death worldwide that is attributed to gradual long-term accumulation of both genetic and epigenetic changes. To reduce the mortality rate of CRC and to improve treatment efficacy, it will be important to develop accurate noninvasive diagnostic tests for screening, acute and personalized diagnosis. Epigenetic changes such as DNA methylation play an important role in the development and progression of CRC. Over the last decade, a panel of DNA methylation markers has been reported showing a high accuracy and reproducibility in various semi-invasive or noninvasive biosamples. Research to obtain comprehensive panels of markers allowing a highly sensitive and differentiating diagnosis of CRC is ongoing. Moreover, the epigenetic alterations for cancer therapy, as a precision medicine strategy will increase their therapeutic potential over time. Here, we discuss the current state of DNA methylation-based biomarkers and their impact on CRC diagnosis. We emphasize the need to further identify and stratify methylation-biomarkers and to develop robust and effective detection methods that are applicable for a routine clinical setting of CRC diagnostics particularly at the early stage of the disease., (© 2022 The Authors. International Journal of Cancer published by John Wiley & Sons Ltd on behalf of UICC.)

Background: A growing number of hepatocellular carcinoma (HCC), and recurrence frequency recently have drawn researchers' attention to alternative approaches. The concept of differentiation therapies (DT) relies on inducing differentiation in HCC cells in order to inhibit recurrence and metastasis. Hepatocyte nuclear factor 4 alpha (HNF4 α ) is the key hepatogenesis transcription factor and its upregulation may decrease the invasiveness of cancerous cells by suppressing epithelial-mesenchymal transition (EMT). This study aimed to evaluate the effect of conjugated linoleic acid (CLA) treatment, natural ligand of HNF4 α , on the proliferation, migration, and invasion capacities of HCC cells in vitro. Materials and Method. Sk-Hep-1 and Hep-3B cells were treated with different doses of CLA or BIM5078 [1-(2'-chloro-5'-nitrobenzenesulfonyl)-2-methylbenzimidazole], an HNF4 α antagonist. The expression levels of HNF4a and EMT related genes were evaluated and associated to hepatocytic functionalities, migration, and colony formation capacities, as well as to viability and proliferation rate of HCC cells., Results: In both HCC lines, CLA treatment induced HNF4α expression in parallel to significantly decreased EMT marker levels, migration, colony formation capacity, and proliferation rate, whereas BIM5078 treatment resulted in the opposite effects. Moreover, CLA supplementation also upregulated ALB, ZO1, and HNF4 α proteins as well as glycogen storage capacity in the treated HCC cells., Conclusion: CLA treatment can induce a remarkable hepatocytic differentiation in HCC cells and attenuates cancerous features. This could be as a result of HNF4a induction and EMT inhibition., Competing Interests: The authors declare no conflict of interest., (Copyright © 2022 Zohre Miri-Lavasani et al.)

This study was aimed to develop a fixed dose combination (FDC) tablet containing a low dose of evogliptin tartrate (6.87 mg) for immediate release combined with a high dose (1000 mg) of sustained-release (SR) metformin HCl appropriate for once daily dosing the treatment of type 2 diabetes. To prepare the FDC tablets, an active coating was used in this study, whereby evogliptin tartrate film was layered on a matrix core tablet containing metformin HCl. To overcome the problem caused by a low-dose drug in combination with a relatively large matrix tablet containing high-dose drug, it was also aimed to confirm the formulation and coating operation for satisfactory content uniformity, and to describe the chemical stability during storage of the amorphous active coating layer formulation in relation to molecular mobility. Furthermore, the in vitro release and in vivo pharmacokinetic profiles of metformin HCl and evogliptin tartrate in the FDC active coating tablet were compared to those of the commercially marketed reference drugs, Diabex XR® (Daewoong, Seoul, Korea) containing metformin HCl and Suganon® (Donga ST, Seoul, Korea) containing evogliptin tartrate. In conclusion, the newly developed FDC active coating tablet in this study was confirmed to be bioequivalent to the reference marketed products in beagle dogs, with satisfactory content uniformity and stability., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Competing Interests: None disclosed.

In this study, supercritical fluid-assisted spray-drying (SA-SD) was applied to achieve the micronization of fenofibrate particles possessing surface-active additives, such as d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS), sucrose mono palmitate (Sucroester 15), and polyoxyethylene 52 stearate (Myrj 52), to improve the pharmacokinetic and pharmacodynamic properties of fenofibrate. For comparison, the same formulation was prepared using a spray-drying (SD) process, and then both methods were compared. The SA-SD process resulted in a significantly smaller mean particle size (approximately 2 μm) compared to that of unprocessed fenofibrate (approximately 20 μm) and SD-processed particles (approximately 40 μm). There was no significant difference in the effect on the particle size reduction among the selected surface-active additives. The microcomposite particles prepared with surface-active additives using SA-SD exhibited remarkable enhancement in their dissolution rate due to the synergistic effect of comparably moderate wettability improvement and significant particle size reduction. In contrast, the SD samples with the surface-active additives exhibited a decrease in dissolution rate compared to that of the unprocessed fenofibrate due to the absence of particle size reduction, although wettability was greatly improved. The results of zeta potential and XPS analyses indicated that the surface-active additive coverage on the surface layer of the SD-processed particles with a better wettability was higher than that of the SA-SD-processed composite particles. Additionally, after rapid depletion of hydrophilic additives that were excessively distributed on the surfaces of SD-processed particles, the creation of a surface layer rich in poorly water-soluble fenofibrate resulted in a decrease in the dissolution rate. In contrast, the surface-active molecules were dispersed homogeneously throughout the particle matrix in the SA-SD-processed microparticles. Furthermore, improved pharmacokinetic and pharmacodynamic characteristics were observed for the SA-SD-processed fenofibrate microparticles compared to those for the SD-processed fenofibrate particles. Therefore, the SA-SD process incorporating surface-active additives can efficiently micronize poorly water-soluble drugs and optimize their physicochemical and biopharmaceutical characteristics.

Micro-/nanoparticle formulations containing drugs with or without various biocompatible excipients are widely used in the pharmaceutical field to improve the physicochemical and clinical properties of the final drug product. Among the various micro-/nanoparticle production technologies, emulsion-based particle formation is the most widely used because of its unique advantages such as uniform generation of spherical small particles and higher encapsulation efficiency (EE). For this emulsion-based micro-/nanoparticle technology, one of the most important factors is the extraction efficiency associated with the fast removal of the organic solvent. In consideration of this, a technology called supercritical fluid extraction of emulsions (SFEE) that uses the unique mass transfer mechanism and solvent power of a supercritical fluid (SCF) has been proposed to overcome the shortcomings of several conventional technologies such as solvent evaporation, extraction, and spray drying. This review article presents the main aspects of SFEE technology for the preparation of micro-/nanoparticles by focusing on its pharmaceutical applications, which have been organized and classified according to several types of drug delivery systems and active pharmaceutical ingredients. It was definitely confirmed that SFEE can be applied in a variety of drugs from water-soluble to poorly water-soluble. In addition, it has advantages such as low organic solvent residual, high EE, desirable release control, better particle size control, and agglomeration prevention through efficient and fast solvent removal compared to conventional micro-/nanoparticle technologies. Therefore, this review will be a good resource for determining the applicability of SFEE to obtain better pharmaceutical quality when researchers in related fields want to select a suitable manufacturing process for preparing desired micro-/nanoparticle drug delivery systems containing their active material.

The aim of this study was to assess the effects of pirfenidone (PFD) on promoting epithelial-mesenchymal-transition (EMT) and stemness features in breast carcinoma cells through targeting cancer-associated-fibroblasts (CAFs). Using The Cancer Genome Atlas (TCGA) database, we analyzed the association between stromal index, EMT, and stemness-related genes across 1084 breast cancer patients, identifying positive correlation between YAP1, EMT, and stemness genes in samples with a high-stromal index. We monitored carcinoma cell invasion and spheroid formation co-cultured with CAFs in a 3D microfluidic device, followed by exposing carcinoma cells, spheroids, and CAFs with PFD. We depicted a positive association between the high-stromal index and the expression of EMT and stemness genes. High YAP1 expression in samples correlated with more advanced EMT status and stromal index. Additionally, we found that CAFs promoted spheroid formation and induced the expression of YAP1, VIM, and CD44 in spheroids. Treatment with PFD reduced carcinoma cell migration and decreased the expression of these genes at the protein level. The cytokine profiling showed significant depletion of various EMT- and stemness-regulated cytokines, particularly IL8, CCL17, and TNF-beta. These data highlight the potential application of PFD on inhibiting EMT and stemness in carcinoma cells through the targeting of critical cytokines.

The purpose of this study was to evaluate the effects of cyclodextrins (CyDs) to stabilize exnatide in the microencapsulation medium and influence on the pharmaceutical properties of exenatide loaded PLGA microsphere. Three CyDs interacted differently with exenatide by investigation using ultraviolet, fluorescence and circular dichroism spectroscopy. The binding affinities of CyDs to the hydrophobic tryptophan residues of exenatide increased in following order: α-CyD < β-CyD < γ-CyD. It was consistent with orders of W/O interface stabilizing and anti-adsorption effects. However, the stabilizing effect of β-CyD on liquid-state and freeze-drying of exenatide was greater than that of γ-CyD. The negative values of ΔH 0 , ΔS 0 , and ΔG 0 indicated that the exenatide-CyDs complex formation was a favorable exothermic and spontaneous processes that increased the order in the complex with structural rigidity. Furthermore, it was also shown that β-CyD improved encapsulation efficiency, in vitro extended release, and in vivo pharmacokinetic and pharmacodynamic properties of prepared PLGA microspheres., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

A fixed dose combination (FDC) bilayer tablet, consisting of high-dose metformin HCl in a sustained release layer and low-dose evogliptin tartrate in an immediate release layer, was developed based on a quality by design (QbD) approach. To implement QbD approach, the bilayer tableting process parameters judged as high risk through risk analysis were optimized by a central composite face-centered design as a design of experiment (DOE) methodology. Using DOE, the optimized conditions of the tableting process for drug products that satisfy the established quality target product profiles were obtained. The content uniformity of low-dose evogliptin tartrate in the optimized bilayer tablet prepared on a large scale was confirmed by at-line transmittance Raman spectroscopy as a process analytical technology. In addition, the in vitro drug release and in vivo pharmacokinetic studies showed that metformin HCl and evogliptin tartrate in the bilayer tablet is bioequivalent to those of the respective reference drugs. Furthermore, the physicochemical stability of the optimized bilayer tablet during storage under long-term and accelerated conditions was also confirmed. Therefore, it can be concluded that the QbD approach is an effective way to develop a new FDC bilayer tablet that is easy to scale up for successful commercialization., (Copyright © 2021 Elsevier B.V. All rights reserved.)

To limit the spread of the SARS-CoV-2 (COVID-19) outbreak, humans have been significantly restricted in their ability to travel and interact with others worldwide. Consequently, dermatology conferences were forced to adapt to such changes. The aim of this study is to investigate the impact of COVID-19 on international dermatology conferences. We retrospectively investigated decisions made for international dermatology conferences scheduled for 2020. Thirty-three major conferences were analyzed. Their data were obtained from their respective websites (data was accessed 2 June 2021). Among 33 conferences analyzed, 13 (39.4%) were conducted as scheduled, nine (27.3%) were canceled, eight (24.3%) were postponed to 2021 or 2022, and three (9.1%) were delayed but conducted in 2020. The number of the cancellation (44.4%) and postponement (75%) was the largest in the second quarter of the year. During the fourth quarter, most conferences were held on schedule (70%) but were run virtually. Eight out of 13 virtual conferences shortened their duration (61.5%). Most (90.9%) conferences have decided on the schedule of their meetings for 2021 or 2022 while three (9.1%) remain undecided. Twelve (40%) are planned to run virtually, eight (26.7%) have opted for a hybrid form, five (16.7%) are planned to run in-person, four (13.3%) have not decided on the format, and one (3.3%) has been canceled. Virtual and hybrid conference formats have facilitated people to share knowledge despite the travel restrictions posed by the COVID-19 pandemic. Such formats are environmentally friendly, are able to attract a large audience, and save delegates time and costs involved in attending. Therefore, virtual platforms should continue to be integrated within conferences in the post-pandemic era., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2021 Ha, Hong, Lim, Soyer and Mun.)

Epithelial-mesenchymal transition (EMT) and its reverse process, mesenchymal-epithelial transition (MET), are believed to play key roles in facilitating the metastatic cascade. Metastatic lesions often exhibit a similar epithelial-like state to that of the primary tumour, in particular, by forming carcinoma cell clusters via E-cadherin-mediated junctional complexes. However, the factors enabling mesenchymal-like micrometastatic cells to resume growth and reacquire an epithelial phenotype in the target organ microenvironment remain elusive. In this study, we developed a workflow using image-based cell profiling and machine learning to examine morphological, contextual and molecular states of individual breast carcinoma cells (MDA-MB-231). MDA-MB-231 heterogeneous response to the host organ microenvironment was modelled by substrates with controllable stiffness varying from 0.2kPa (soft tissues) to 64kPa (bone tissues). We identified 3 distinct morphological cell types (morphs) varying from compact round-shaped to flattened irregular-shaped cells with lamellipodia, predominantly populating 2-kPa and >16kPa substrates, respectively. These observations were accompanied by significant changes in E-cadherin and vimentin expression. Furthermore, we demonstrate that the bone-mimicking substrate (64kPa) induced multicellular cluster formation accompanied by E-cadherin cell surface localisation. MDA-MB-231 cells responded to different substrate stiffness by morphological adaptation, changes in proliferation rate and cytoskeleton markers, and cluster formation on bone-mimicking substrate. Our results suggest that the stiffest microenvironment can induce MET., Competing Interests: The authors have declared that no competing interests exist.

Carcinoma of Unknown Primary (CUP) is a heterogeneous and metastatic disease where the primary site of origin is undetectable. Currently, chemotherapy is the only state-of-art treatment option for CUP patients. The molecular profiling of the tumour, particularly mutation detection, offers a new treatment approach for CUP in a personalized fashion using targeted agents. We analyzed the mutation and copy number alterations profile of 1709 CUP samples deposited in the AACR Project Genomics Evidence Neoplasia Information Exchange (GENIE) cohort and explored potentially druggable mutations. We identified 52 significant mutated genes (SMGs) among CUP samples, in which 13 (25%) of SMGs were potentially targetable with either drugs are approved for the know primary tumour or undergoing clinical trials. The most variants detected were TP53 (43%), KRAS (19.90%), KMT2D (12.60%), and CDKN2A (10.30%). Additionally, using pan-cancer analysis, we found similar variants of TERT promoter in CUP and NSCLC samples, suggesting that these mutations may serve as a diagnostic marker for identifying the primary tumour in CUP. Taken together, the mutation profiling analysis of the CUP tumours may open a new way of identifying druggable targets and consequently administrating appropriate treatment in a personalized manner., (© 2021. The Author(s).)

Gastric adenocarcinoma (GAC) is the third leading cause of cancer-related death worldwide. A high mortality rate and resistance to treatment protocols due to a heterogeneous molecular pathogenesis has made discovering the key etiologic molecular alterations of the utmost importance. The remarkable role played by epigenetic modifications in repressing or activating many cancer-related genes and forming new epigenetic signatures can affect cancer initiation and progression. Hence, targeting the key epigenetic drivers could potentially attenuate cancer progression. MLLs, ARID1A and EZH2 are among the major epigenetic players that are frequently mutated in GACs. In this paper, we have proposed the existence of a network between these proteins that, together with PCAF and KDM6A, control the 3D chromatin structure and regulate the expression of tumor suppressor genes (TSGs) and oncogenes in GAC. Therefore, we suggest that manipulating the expression of EZH2, PCAF, and KDM6A or their downstream targets may reduce the cancerous phenotype in GAC., Competing Interests: Declaration of Competing Interest The authors have nothing to declare., (Copyright © 2021 The Authors. Published by Elsevier Inc. All rights reserved.)

Eperisone is an oral muscle relaxant used to treat musculoskeletal diseases, which exhibits high pharmacokinetic (PK) variability in bioequivalence studies. The aim of this study was to characterize the PKs of eperisone following its oral administration to Korean volunteers through the conduct of a noncompartmental and population analysis. A total of 360 concentration-time measurements collected on two separate occasions from 15 healthy volunteers during a bioequivalent study of eperisone 50 mg (Murex ® ) were used in the PK analysis. Noncompartmental analysis was performed using WinNonLin TM and population analysis was performed using NONMEM ® . The possible influence of thirty demographic and pathophysiological characteristics on the PKs of eperisone were explored. Based on noncompartmental analysis mean eperisone elimination half-life, apparent clearance (CL/F), and apparent volume of distribution were estimated to be 3.81 h, 39.24 × 10 3  l/h × 10 3  L, respectively. During population PK modeling a two-compartment model with first-order absorption rate constant (typical population K a  = 1.5 h -1 ) and first-order elimination (typical population CL/F and apparent volume of distribution in the central compartment [V c /F] = 30.8 × 10 3  l/h and 86.2 × 10 3  l, respectively) best described the PKs of eperisone. Interindividual variability in CL/F and V c /F were estimated to be 87.9% and 130.3%, respectively and interoccasion variability in CL/F and V c /F were estimated to be 23.8% and 30.8%, respectively. Aspartate aminotransferase level and smoking status were identified as potential covariates that may influence the CL/F of eperisone. This is the first study to develop a disposition model for eperisone and investigate the potential influence of covariate factors on it PK variability., (© 2021 John Wiley & Sons Ltd.)

In this study, we designed amorphous solid dispersions based on Eudragit E/HCl (neutralized Eudragit E using hydrochloric acid) to maximize the dissolution of trans -resveratrol. Solid-state characterization of amorphous solid dispersions of trans -resveratrol was performed using powder X-ray diffraction, scanning electron microscopy, and particle size measurements. In addition, an in vitro dissolution study and an in vivo pharmacokinetic study in rats were carried out. Among the tested polymers, Eudragit E/HCl was the most effective solid dispersion for the solubilization of trans -resveratrol. Eudragit E/HCl significantly inhibited the precipitation of trans -resveratrol in a pH 1.2 dissolution medium in a dose-dependent manner. The amorphous Eudragit E/HCl solid dispersion at a trans -resveratrol/polymer ratio of 10/90 exhibited a high degree of supersaturation without trans -resveratrol precipitation for at least 48 h by the formation of Eudragit E/HCl micelles. In rats, the absolute oral bioavailability (F%) of trans -resveratrol from Eudragit E/HCl solid dispersion (10/90) was estimated to be 40%. Therefore, trans -resveratrol-loaded Eudragit E/HCl solid dispersions prepared by spray drying offer a promising formulation strategy with high oral bioavailability for developing high-quality health supplements, nutraceutical, and pharmaceutical products.

Targeted radionuclide therapy, known as molecular radiotherapy is a novel therapeutic module in cancer medicine. β-radiating radionuclides have definite impact on target cells via interference in cell cycle and particular signalings that can lead to tumor regression with minimal off-target effects on the surrounding tissues. Radionuclides play a remarkable role not only in apoptosis induction and cell cycle arrest, but also in the amelioration of other characteristics of cancer cells. Recently, application of novel β-radiating radionuclides in cancer therapy has been emerged as a promising therapeutic modality. Several investigations are ongoing to understand the underlying molecular mechanisms of β-radiating elements in cancer medicine. Based on the radiation dose, exposure time and type of the β-radiating element, different results could be achieved in cancer cells. It has been shown that β-radiating radioisotopes block cancer cell proliferation by inducing apoptosis and cell cycle arrest. However, physical characteristics of the β-radiating element (half-life, tissue penetration range, and maximum energy) and treatment protocol determine whether tumor cells undergo cell cycle arrest, apoptosis or both and to which extent. In this review, we highlighted novel therapeutic effects of β-radiating radionuclides on cancer cells, particularly apoptosis induction and cell cycle arrest., (Copyright © 2020. Published by Elsevier Ltd.)

In this study, glimepiride and l-arginine (GA) binary mixtures at various molar ratios were prepared to evaluate whether they could improve the poor water solubility and dissolution characteristics of glimepiride. It was shown that glimepiride and arginine form a eutectic mixture, a type of crystalline solid dispersions, at a 1:1 M ratio and eutectic temperature of 426.9 K using a phase diagram constructed using differential scanning calorimetry (DSC) and thermo-microscopy. The preserved characteristic powder X-ray diffraction (PXRD) patterns and infrared (IR) spectra of each material in those of GA binary mixtures confirmed the formation of eutectic mixture without molecular interaction in solid state. The formation of GA eutectic mixture (GAEM) resulted in the improvement of solubility through pH modification and the intermolecular interaction of glimepiride and l-arginine in aqueous mediums, thereby wettability and dissolution rate of glimepiride were also enhanced. The intermolecular interaction between glimepiride and l-arginine at a 1:1 stoichiometry of the complex in solution state was identified by phase solubility, stoichiometric determination, and solution state nuclear magnetic resonance (NMR) spectroscopy. Specific molecular interactions such as hydrogen bonding and hydrophobic interaction were suggested as main mechanisms of GA complexation in solution. Therefore, this study concludes that the GAEM could be an effective way to improve the solubility and dissolution rate of glimepiride., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The glimepiride/L-arginine (GA) binary systems were prepared at various molar ratios by using a supercritical antisolvent (SAS) process. For comparison, the GA system was also prepared by physical mixing (PM), melt quenching (MQ), and solvent evaporation (SE) methods. Analyses by DSC and PXRD showed that only the GA binary mixture at 1:1 M ratio prepared by the SAS process was a pure co-amorphous mixture with an excellent content uniformity. On the other hand, GA mixture prepared by PM and SE were not pure co-amorphous systems and contained crystalline eutectic mixture, and MQ method at 170 °C induced the decrease in drug content due to decomposition of glimepiride. The positive deviation of experimentally measured glass transition temperature (T g ) compared to predicted T g by the Gordon Taylor equation suggests specific molecular interactions between glimepiride and L-arginine in solid-state GA co-amorphous (GACA) mixture. The intermolecular interactions between glimepiride and L-arginine in GACA system were characterized by FT-IR and solid-state NMR analyses. Improved glimepiride dissolution rate of GACA formulation were confirmed using the solubility test, contact angle measurement, and dissolution test. Furthermore, the evaluation of pharmacodynamic hypoglycemic effect demonstrated that GACA prepared by the SAS process significantly improved the therapeutic efficacy of glimepiride., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The aim of this study was to prepare pure trans -resveratrol nanoparticles without additives (surfactants, polymers, and sugars) using a supercritical antisolvent (SAS) process with alcohol (methanol or ethanol) and dichloromethane mixtures. In addition, in order to investigate the effect of particle size on the dissolution and oral bioavailability of the trans -resveratrol, two microparticles with different sizes (1.94 μm and 18.75 μm) were prepared using two different milling processes, and compared to trans -resveratrol nanoparticles prepared by the SAS process. The solid-state properties of pure trans -resveratrol particles were characterized. By increasing the percentage of dichloromethane in the solvent mixtures, the mean particle size of trans -resveratrol was decreased, whereas its specific surface area was increased. The particle size could thus be controlled by solvent composition. Trans -resveratrol nanoparticle with a mean particle size of 0.17 μm was prepared by the SAS process using the ethanol/dichloromethane mixture at a ratio of 25/75 ( w / w ). The in vitro dissolution rate of trans -resveratrol in fasted state-simulated gastric fluid was significantly improved by the reduction of particle size, resulting in enhanced oral bioavailability in rats. The absolute bioavailability of trans -resveratrol nanoparticles was 25.2%. The maximum plasma concentration values were well correlated with the in vitro dissolution rate. These findings clearly indicate that the oral bioavailability of trans -resveratrol can be enhanced by preparing pure trans -resveratrol nanoparticles without additives (surfactants, polymers, and sugars) by the SAS process. These pure trans -resveratrol nanoparticles can be applied as an active ingredient for the development of health supplements, pharmaceutical products, and cosmetic products.

The aim of this work was to develop an amorphous orlistat-loaded mesoporus silica formulation using the melt-amorphisation by supercritical fluid (MA-SCF) and to investigate the effects of pressure and temperature on the pharmaceutical properties of the developed formulation. In addition, the effect of orlistat mass ratio to the mesoporus silica was also evaluated. The carbon dioxide was used as a supercritical fluid, and Neusilin ® UFL2 was selected as the mesoporous silica. For comparison with conventional amorphisation methods, orlistat formulations were also prepared by solvent evaporation and hot melt methods. Various pharmaceutical evaluations including differential scanning calorimetry, powder X-ray diffraction, scanning electron microscopy, specific surface area, total pore volume, and content uniformity were performed to characterise the prepared orlistat formulation. The melting point depression and the solubility of orlistat in supercritical carbon dioxide (SC-CO 2 ) were selected for the interpretation of evaluated results in relation to temperature and pressure. The total pore volume of the prepared orlistat-loaded mesoporus silica decreased with an increasing density of SC-CO 2 to about 500 g/L at a constant temperature or pressure. From these results, it was suggested that increasing the density of SC-CO 2 to about 500 g/L could result in the easier penetration of CO 2 into molten orlistat and lower viscosity, hence facilitating the introduction and loading of orlistat into the pores of Neusilin ® UFL2. However, when the density of SC-CO 2 increased to more than 500 g/L, the total pore volume increased, and this may be due to the release out of orlistat from the pores of Neusilin ® UFL2 by the increased orlistat solubility in SC-CO 2 . Interestingly, as the total pore volume decreased by the filling of the drug, the drug crystallinity decreased; hence, the dissolution rate increased. Furthermore, it was shown that the most desirable mass ratio of Neusilin ® UFL2:orlistat for the amorphisation was 1:0.8 at an optimised supercritical condition of 318 K and 10 MPa. Compared with other amorphisation methods, only the sample prepared by the MA-SCF method was in pure amorphous state with the fastest dissolution rate. Therefore, it was concluded that the amorphous orlistat-loaded mesoporus silica prepared using MA-SCF under optimised conditions was more advantageous for enhancing the dissolution rate of orlistat than other conventional amorphisation methods.

Self-emulsifying drug delivery systems (SEDDSs) are a vital strategy to enhance the bioavailability (BA) of formulations of poorly water-soluble compounds. However, these formulations have certain limitations, including in vivo drug precipitation, poor in vitro in vivo correlation due to a lack of predictive in vitro tests, issues in handling of liquid formulation, and physico-chemical instability of drug and/or vehicle components. To overcome these limitations, which restrict the potential usage of such systems, the supersaturable SEDDSs (su-SEDDSs) have gained attention based on the fact that the inclusion of precipitation inhibitors (PIs) within SEDDSs helps maintain drug supersaturation after dispersion and digestion in the gastrointestinal tract. This improves the BA of drugs and reduces the variability of exposure. In addition, the formulation of solid su-SEDDSs has helped to overcome disadvantages of liquid or capsule dosage form. This review article discusses, in detail, the current status of su-SEDDSs that overcome the limitations of conventional SEDDSs. It discusses the definition and range of su-SEDDSs, the principle mechanisms underlying precipitation inhibition and enhanced in vivo absorption, drug application cases, biorelevance in vitro digestion models, and the development of liquid su-SEDDSs to solid dosage forms. This review also describes the effects of various physiological factors and the potential interactions between PIs and lipid, lipase or lipid digested products on the in vivo performance of su-SEDDSs. In particular, several considerations relating to the properties of PIs are discussed from various perspectives., Competing Interests: The authors declare no conflict of interest.

Orlistat, an anti-obesity drug, has two critical issues-the first is its low efficacy due to low water solubility and the second is side effects such as oily spotting due to its lipase inhibition. The present study was designed to propose a solution using a formulation with mesoporous silica to simultaneously overcome two issues. Orlistat was loaded onto mesoporous silica by the supercritical melt-adsorption (SCMA) method, using carbon dioxide (CO 2 ). Various types of mesoporous silica were used as adsorbents, and the effects of the pore volume, diameter and particle size of mesoporous silica on the pharmaceutical characteristics were evaluated by various solid-state characterization methods and in vitro and in vivo studies in relation to pharmacological efficacy and the improvement of side effects. The results showed that the pore volume and diameter determine loadable drug amount inside pores and crystallinity. The dissolution was significantly influenced by crystallinity, pore diameter and particle size, and the inhibition of lipase activity was in proportion to the dissolution rate. In vivo studies revealed that the serum triglyceride (TG) concentration was significantly decreased in the group administered amorphous orlistat-loaded Neuisilin ® UFL2 with the highest in vitro dissolution rate and lipase activity inhibition in comparison to the commercial product. Furthermore, oily spotting tests in rats revealed that undigested oil was adsorbed onto mesoporous silica after orlistat was released in the gastro-intestinal tract, and it correlated with in vitro result that oil adsorption capacity was dependent on the surface area of empty mesoporous silica. Therefore, it was concluded that mesoporous silica type plays a major role in determining the pharmaceutical characteristics of orlistat formulation prepared using SCMA with CO 2 for improving the low solubility and overcoming the side effects.

Background and Objective: Dutasteride, an analog of testosterone, a 5α-reductase inhibitor is widely used in the treatment of moderate to severe symptomatic benign prostatic hyperplasia. The aim of this study was to compare the pharmacokinetic characteristics of dutasteride in beagle dogs after oral administration of a conventional soft gelatin capsule (Avodart ® ) and a novel solid-supersaturatable soft-microemulsifying drug delivery system (SMEDDS) tablet., Methods: In this comparative dissolution study, the dissolution of dutasteride was pH-independent for both formulations. Noncompartmental analysis and modeling approaches were carried out to determine the pharmacokinetic parameters of dutasteride., Results: Approximately 90% of the drug dissolved in all media within 15 min, indicating that there was little difference in the dissolution rate of the solid-supersaturatable SMEDDS tablets and that of the commercial soft gelatin capsules. Using t test analysis, no statistically significant difference was detected in the pharmacokinetic parameters of the two formulations. The test/reference geometric mean ratios were 1.087 (90% confidence intervals 0.8529-1.3854) for the area under the plasma concentration versus time curve from 0 to the last time point (48 h) with a measurable concentration and 1.094 (90% confidence intervals 0.8909-1.3454) for maximum plasma concentration. Unfortunately, the bioequivalent criterium (0.8-1.25) was not met due to the small sample size, but the results of this study suggest a possible bioequivalence of dutasteride in the two formulations., Conclusion: Based on the results of this study, the development of a tablet dosage form of dutasteride using a solid-supersaturatable SMEDDS should be considered for humans.

The aim of this study was to investigate the effects of various parameters at each control strategy in drug product degradation on the stability of pemetrexed in injectable aqueous solution. A forced degradation study confirmed that oxidation is the main mechanism responsible for the degradation of pemetrexed in aqueous solutions. As control strategies, the antioxidant levels, drug concentration, pH of the control formulation, dissolved oxygen (DO) levels in the control process, and headspace oxygen levels in the control packaging were varied, and their effects on the stability of pemetrexed were evaluated. Sodium sulfite was found to be particularly effective in preventing the color change, and N -acetylcysteine (NAC) had a significant effect in preventing chemical degradation. The sulfite and NAC were found to stabilize pemetrexed in the aqueous solution by acting as sacrificial reductants. A pH below 6 caused significant degradation. The stability of pemetrexed in the solution increased as the concentration of the drug increased from 12.5 to 50 mg/mL. In addition, the DO levels in the solution were controlled by nitrogen purging, and the oxygen levels in headspace were controlled by nitrogen headspace, which also had significant positive effects in improving the stability of the pemetrexed solution; thus, it was confirmed that molecular oxygen is involved in the rate-limiting oxidation step. Based on these results obtained by observing the effects of various control strategies, the optimal formulation of an injectable solution of pemetrexed is suggested as follows: sodium sulfite at 0.06 mg/mL, as an antioxidant for prevention of color change; NAC at 1.63 mg/mL, as an antioxidant for prevention of chemical degradation; pH range 7-8; DO levels below 1 ppm; and headspace oxygen levels below 1%. In conclusion, it can be suggested that this study, which includes well-designed control strategies, can lead to a better understanding of the complex degradation mechanism of pemetrexed; thus, it can lead to the development of an injectable solution formulation of pemetrexed, with improved stability.

The purpose of this study was to develop a resveratrol nanosuspension with enhanced oral bioavailability, based on an understanding of the formulation and process parameters of nanosuspensions and using a quality by design (QbD) approach. Particularly, the antisolvent method, which requires no solvent removal and no heating, is newly applied to prepare resveratrol nanosuspension. To ensure the quality of the resveratrol nanosuspensions, a quality target product profile (QTPP) was defined. The particle size (z-average, d90), zeta potential, and drug content parameters affecting the QTPP were selected as critical quality attributes (CQAs). The optimum composition obtained using a 3-factor, 3-level Box-Behnken design was as follows: polyvinylpyrrolidone vinyl acetate (10 mg/mL), polyvinylpyrrolidone K12 (5 mg/mL), sodium lauryl sulfate (1 mg/mL), and diethylene glycol monoethyl ether (DEGEE, 5% v / v ) at a resveratrol concentration of 5 mg/mL. The initial particle size (z-average) was 46.3 nm and the zeta potential was -38.02 mV. The robustness of the antisolvent process using the optimized composition conditions was ensured by a full factorial design. The dissolution rate of the optimized resveratrol nanosuspension was significantly greater than that of the resveratrol raw material. An in vivo pharmacokinetic study in rats showed that the area under the plasma concentration versus time curve ( AUC 0-12h ) and the maximum plasma concentration ( C max ) respectively, than those of the resveratrol raw material. Therefore, the prepara values of the resveratrol nanosuspension were approximately 1.6- and 5.7-fold higher,tion of a resveratrol nanosuspension using the QbD approach may be an effective strategy for the development of a new dosage form of resveratrol, with enhanced oral bioavailability.

The aim of this study was to investigate the effects of various stabilizers on the encapsulation efficiency and release of exenatide-loaded PLGA (poly(lactic- co -glycolic acid)) microspheres prepared by the water-in-oil-in-water (W/O/W) solvent evaporation (SE) method. It was shown that the stabilizers affected exenatide stability in aqueous solutions, at water/dichloromethane interfaces, on PLGA surfaces, or during freeze-thawing and freeze-drying procedures. Sucrose predominantly reduces instability generated during freeze-thawing and freeze-drying. Phenylalanine prevents the destabilization at the water-dichloromethane (DCM) interface through decreased adsorption. Poloxamer 188 enhances stability in aqueous solutions and prevents adsorption to PLGA. Proline and lysine decrease adsorption on PLGA surfaces. Fourier transform infra-red spectroscopy (FT-IR) was used to find the molecular interaction of additives with exenatide or PLGA. Additives used in stability assessments were then added stepwise into the inner or outer water phase of the W/O/W double emulsion, and exenatide-loaded microspheres were prepared using the solvent evaporation method. The effect of each stabilizer on the encapsulation efficiency and release behavior of microspheres correlated well with the stability assessment results, except for the negative effect of poloxamer 188. Particle size analysis using laser diffractometry, scanning electron microscopy (SEM), water vapor sorption analysis, differential scanning calorimetry (DSC), and circular dichroism (CD) spectroscopy were also employed to characterize the prepared exenatide-loaded PLGA microsphere. This study demonstrated that an adequate formulation can be obtained by the study about the effect of stabilizers on peptide stability at the preformulation step. In addition, it can help to overcome various problems that can cause the destabilization of a peptide during the microsphere-manufacturing process and sustained drug release.