Search

The Coronagraphic Debris Exoplanet Exploring Payload (CDEEP) is a Small-Sat mission concept for high contrast imaging of circumstellar disks. CDEEP is designed to observe disks in scattered light at visible wavelengths at a raw contrast level of 10^-7 per resolution element (10^-8 with post processing). This exceptional sensitivity will allow the imaging of transport dominated debris disks, quantifying the albedo, composition, and morphology of these low-surface brightness disks. CDEEP combines an off-axis telescope, microelectromechanical systems (MEMS) deformable mirror, and a vector vortex coronagraph (VVC). This system will require rigorous testing and characterization in a space environment. We report on the CDEEP mission concept, and the status of the vacuum-compatible CDEEP prototype testbed currently under development at the University of Arizona, including design development and the results of simulations to estimate performance., 17 pages, 12 figures, Published in proceedings of SPIE Astronomical Telescopes + Instrumentation 2020

The Large Binocular Telescope Interferometer (LBTI) combines the light from the two 8.4 m primary mirrors of the LBT for interferometry and adaptive optics (AO) imaging. With two high performance, state-of-the-art AO systems and adaptive secondary mirrors, a cryogenic instrument, and an edge-to-edge baseline of 23 m, the LBTI is a unique instrument for sensitive, high-angular resolution and high-contrast thermal infrared observations. After the successful completion of the NASA-funded HOSTS nulling interferometry survey for exozodiacal dust, our team is now completing the commissioning and extending the capabilities of other observing modes, namely Fizeau imaging interferometry, spectro-interferometry, integral field spectroscopy, non-redundant aperture masking, and coronagraphy for general astronomical observations. In this paper we briefly review the design of the LBTI, summarize the results and performance of HOSTS, and describe the LBTI’s wider current and future capabilities.

PHASECam is the fringe tracker for the Large Binocular Telescope Interferometer (LBTI). It is a near-infrared camera which is used to measure both tip/tilt and fringe phase variations between the two adaptive optics (AO) corrected apertures of the Large Binocular Telescope (LBT). Tip/tilt and phase sensing are currently performed in the $H$ (1.65 $\mu$m) and $K$ (2.2 $\mu$m) bands at 1 kHz, but only the $K$-band phase telemetry is used to send corrections to the system in order to maintain fringe coherence and visibility. However, due to the cyclic nature of the fringe phase, only the phase, modulo 360 deg, can be measured. PHASECam's phase unwrapping algorithm, which attempts to mitigate this issue, occasionally fails in the case of fast, large phase variations or low signal-to-noise ratio. This can cause a fringe jump, in which case the OPD correction will be incorrect by a wavelength. This can currently be manually corrected by the operator. However, as the LBTI commissions further modes which require robust, active phase control and for which fringe jumps are harder to detect, including multi-axial (Fizeau) interferometry and dual-aperture non-redundant aperture masking interferometry, a more reliable and automated solution is desired. We present a multi-wavelength method of fringe jump capture and correction which involves direct comparison between the $K$-band and $H$-band phase telemetry. We demonstrate the method utilizing archival PHASECam telemetry, showing it provides a robust, reliable way of detecting fringe jumps which can potentially recover a significant fraction of the data lost to them., Comment: 22 pages, 11 figures, accepted for publication by JATIS

Gender equity remains a major issue facing the field of planetary science, and there is broad interest in addressing gender disparities within space science and related disciplines. Many studies of these topics have been performed by professional planetary scientists who are relatively unfamiliar with research in fields such as gender studies and sociology. As a result, they adopt a normative view of gender as a binary choice of 'male' or 'female,' leaving planetary scientists whose genders do not fit within that model out of such research entirely. Reductive frameworks of gender and an overemphasis on quantification as an indicator of gendered phenomena are harmful to people of marginalized genders, especially those who live at the intersections of multiple axes of marginalization such as race, disability, and socioeconomic status. In order for the planetary science community to best serve its marginalized members as we move into the next decade, a new paradigm must be established. This paper aims to address the future of gender equity in planetary science by recommending better survey practices and institutional policies based on a more profound approach to gender., Comment: 7 pages, 0 figures, State of the Profession white paper for the Planetary Science and Astrobiology Decadal Survey 2023-2032. Co-signers list can be found here: https://drive.google.com/file/d/1Pe8J0fNmMoZyMojT6IUNy1X1T6SIGent/view. arXiv admin note: substantial text overlap with arXiv:1907.04893

Photoactive materials hold great promise for a variety of applications. We present a finite element model of light-controlled flexible magnetic composite structure composed of 33.3% Chromium dioxide (CrO2) and 66.7% Polydimethylsiloxane (PDMS) by weight. The structure has a dimension of 8 mm x 2 mm x 100 um and has been previously experimentally studied. Due to the low Curie temperature, the structure acts as an actuator, shows significant deflection under the external magnetic field and relaxation due to laser heating. Thermal and magnetic deflection analysis has been performed using the FEM model. The simulation results show a maximum structural deflection of 6.08 mm (76% of the length of the structure) when subjected to 30 mT magnetic flux density and 160 mW laser power at 303 K (room temperature). We will present the results of the simulation model and comparison to experimental data reproducing the previously observed motion of the (CrO2+PDMS). This model will enable future fracture and fatigue analysis as well as extension to new photoactive geometries., Comment: 12 pages, 10 figures, published in Proceedings Volume 11477, Molecular and Nano Machines III; 1147704 (2020), Event: SPIE Organic Photonics + Electronics, 2020, Online Only

The Large Binocular Telescope Interferometer (LBTI) has the longest baseline in the world, 22.7 m, for performing astronomical interferometry in Fizeau mode, which involves beam combination in a focal plane and preserves a wide field-of-view. LBTI can operate in this mode at wavelengths of 1.2 to 5 and 8 to 12 {\mu}m, making it a unique platform for carrying out high-resolution imaging of circumstellar disks, evolved stars, solar system objects, and possibly searches for planets, in the thermal infrared. Over the past five years, LBTI has carried out a considerable number of interferometric observations by combining the beams near a pupil plane to carry out nulling interferometry. This mode is useful for measuring small luminosity level offsets, such as those of exozodiacal dust disks. The Fizeau mode, by contrast, is more useful for generating an image of the target because it has more (u, v) (Fourier) plane coverage. However, the Fizeau mode is still in an ongoing process of commissioning. Sensitive Fizeau observations require active phase control, increased automation, and the removal of non-common-path aberrations (NCPA) between the science and phase beams. This increased level of control will increase the fringe contrast, enable longer integrations, and reduce time overheads. We are in the process of writing a correction loop to remove NCPA, and have carried out tests on old and synthetic data. We have also carried out on-sky Fizeau engineering tests in fall 2018 and spring 2019. In this article, we share lessons learned and strategies developed as a result of these tests., Comment: To appear in SPIE Proceedings vol. 11117, Techniques and Instrumentation for Detection of Exoplanets IX

PHASECam is the Large Binocular Telescope Interferometer's (LBTI) phase sensor, a near-infrared camera which is used to measure tip/tilt and phase variations between the two AO-corrected apertures of the Large Binocular Telescope (LBT). Tip/tilt and phase sensing are currently performed in the H (1.65 $\mu$m) and K (2.2 $\mu$m) bands at 1 kHz, and the K band phase telemetry is used to send tip/tilt and Optical Path Difference (OPD) corrections to the system. However, phase variations outside the range [-$\pi$, $\pi$] are not sensed, and thus are not fully corrected during closed-loop operation. PHASECam's phase unwrapping algorithm, which attempts to mitigate this issue, still occasionally fails in the case of fast, large phase variations. This can cause a fringe jump, in which case the unwrapped phase will be incorrect by a wavelength or more. This can currently be manually corrected by the observer, but this is inefficient. A more reliable and automated solution is desired, especially as the LBTI begins to commission further modes which require robust, active phase control, including controlled multi-axial (Fizeau) interferometry and dual-aperture non-redundant aperture masking interferometry. We present a multi-wavelength method of fringe jump capture and correction which involves direct comparison between the K band and currently unused H band phase telemetry., Comment: 17 pages, 10 figures

The Large Binocular Telescope Interferometer (LBTI) can perform Fizeau interferometry in the focal plane, which accesses spatial information out to the LBT's full 22.7-m edge-to-edge baseline. This mode has previously been used to obtain science data, but has been limited to observations where the optical path difference (OPD) between the two beams is not controlled, resulting in unstable fringes on the science detectors. To maximize the science return, we are endeavoring to stabilize the OPD and tip-tilt variations and make the LBTI Fizeau mode optimized and routine. Here we outline the optical configuration of LBTI's Fizeau mode and our strategy for commissioning this observing mode., Comment: 15 pages, 7 figures, to appear in the Proceedings of the SPIE (SPIE Astronomical Telescopes + Instrumentation 2018; Optical and Infrared Interferometry and Imaging VI)

We investigate turbulent gas motions in spiral galaxies and their importance to star formation in far outer disks, where the column density is typically far below the critical value for spontaneous gravitational collapse. Following the methods of Burkhart et al. (2010) on the Small Magellanic Cloud, we use the third and fourth statistical moments, as indicators of structures caused by turbulence, to examine the neutral hydrogen (HI) column density of a sample of spiral galaxies selected from The HI Nearby Galaxy Survey (THINGS, Walter et al. 2008). We apply the statistical moments in three different methods- the galaxy as a whole, divided into a function of radii and then into grids. We create individual grid maps of kurtosis for each galaxy. To investigate the relation between these moments and star formation, we compare these maps with their far-ultraviolet images taken by the Galaxy Evolution Explorer (GALEX) satellite. We find that the moments are largely uniform across the galaxies, in which the variation does not appear to trace any star forming regions. This may, however, be due to the spatial resolution of our analysis, which could potentially limit the scale of turbulent motions that we are sensitive to greater than ~700 pc. From comparison between the moments themselves, we find that the gas motions in our sampled galaxies are largely supersonic. This analysis also shows that Burkhart et al. (2010)'s methods may be applied not just to dwarf galaxies but also to normal spiral galaxies., 15 pages, 5 figures, accepted in Astronomy Journal

We present probability density functions and higher order (skewness and kurtosis) analyses of the galaxy-wide and spatially-resolved HI column density distributions in the LITTLE THINGS sample of dwarf irregular galaxies. This analysis follows that of Burkhart et al. (2010) for the Small Magellanic Cloud. About 60% of our sample have galaxy-wide values of kurtosis that are similar to that found for the Small Magellanic Cloud, with a range up to much higher values, and kurtosis increases with integrated star formation rate. Kurtosis and skewness were calculated for radial annuli and for a grid of 32 pixel X 32 pixel kernels across each galaxy. For most galaxies, kurtosis correlates with skewness. For about half of the galaxies, there is a trend of increasing kurtosis with radius. The range of kurtosis and skewness values is modeled by small variations in the Mach number close to the sonic limit and by conversion of HI to molecules at high column density. The maximum HI column densities decrease with increasing radius in a way that suggests molecules are forming in the weak field limit, where H_2 formation balances photodissociation in optically thin gas at the edges of clouds., Comment: AJ, in press