Search

Background Adult spinal deformity surgery requires use of long thoracolumbar instrumentation, which is associated with risk of postoperative proximal junctional kyphosis (PJK). Tethering has been used in spinal surgery but not around the spinous process (SP) in the context of preventing PJK. Methods Researchers applied a nondestructive hybrid loading protocol to 7 T8–L2 cadaveric specimens in flexion-extension, lateral bending, and axial rotation (AR). A rigid construct (pedicle screws and rods) and 1- and 2-level SP constructs were tested, as was a hand-tie technique. SP tethering (SPT) constructs use clamps on both sides of the SP; SPT helix constructs use 1 clamp and wrap around the SP. Results All tether constructs showed greater motion at the instrumented level and less motion at adjacent levels compared to rigid constructs. In AR, 1- and 2-level SPT constructs restricted first instrumented level motion to a greater extent when compared with other tether constructs (P ≤ .05). Passing the band through the T10 SP did not produce significant biomechanical differences compared to passing it through the T9–T10 interspinous ligament (P > .05). Hand-tied constructs demonstrated more motion compared to tensioned constructs (P > .05). Intradiscal pressure results corroborated motion data. Conclusions SPT at the proximal end of a rigid construct produced more favorable biomechanical outcomes at instrumented and adjacent levels than were seen with a completely rigid construct. Clinical research is needed to determine whether these methods reduce the risk of PJK among patients. Level of Evidence 3. Clinical Relevance This work sheds light on the biomechanical stability of proximal tethering constructs in an effort to enhance the surgeon9s ability to reduce rates of proximal junctional kyphosis and failure in thoracolumbar spinal fusion surgery.

Ballistic helmets that defeat the threat can still cause head injuries by striking the head with its backface deformation (BFD). In this study the relationship between kinetic energy (KE), helmet backface response and skull fracture severity in protected post-mortem human subjects (PMHS) and swine was explored. Each surrogate was instrumented with force sensors attached to the skull, fitted with a ballistic helmet and shot. Computed tomography (CT) scans of the post-shot helmet deformation were used to quantify the static BFD depth. When investigating the different fracture severity groups, there were no significant differences in the static BFD depths between severity groups, but KE and BFD velocities were able to distinguish between fracture severity groups. The KE of the incoming round was related to the static BFD depth and BFD velocity, where each increased with increasing KE. This study demonstrates that dynamic metrics of the helmet’s backface response are better predictors of injury than the metrics that are currently used.

Study design Survey of spine surgeons and biomechanical comparison of screw pullout forces. Objective To investigate what may be a suboptimal practice regularly occurring in spine surgery. Summary of background data In order for a tap to function in its intended manner, the pitch of the tap should be the same as the pitch of the screw. Undertapping has been shown to increase the pullout force of pedicle screws compared with line-to-line tapping. However, given the way current commercial lumbar pedicle screw systems are designed, undertapping may result in a tap being used that has a different pitch from that of the screw (incongruent pitch). Methods A survey asked participants questions to estimate the proportion of cases each participant performed in the prior year using various hole preparation techniques. Participant responses were interpreted in the context of manufacturing specifications of specific instrumentation systems. Screw pullout forces were compared between undertapping with incongruent pitch and undertapping with congruent pitch using 0.16 g/cm polyurethane foam block and 6.5-mm screws. Results Of the 3679 cases in which participants reported tapping, participants reported line-to-line tapping in 209 cases (5%), undertapping with incongruent pitch in 1156 cases (32%), and undertapping with congruent pitch in 2314 cases (63%). The mean pullout force for undertapping with incongruent pitch was 56 N (8%) less than the mean pullout force for undertapping with congruent pitch. This is equivalent to 13 lb. Conclusion This study estimates that for about 1 out of every 3 surgical cases with tapping of lumbar pedicle screws in the United States, hole preparation is being performed by undertapping with incongruent pitch. This study also shows that undertapping with incongruent pitch results in a decrease in pullout force by 8% compared with undertapping with congruent pitch. Steps should be taken to correct this suboptimal practice. Level of evidence 3.

A cohort of adult acquired flatfoot deformity rigid-body models was developed to investigate the effects of isolated tendon transfer with successive levels of medializing calcaneal osteotomy (MCO). Following IRB approval, six diagnosed flatfoot sufferers were subjected to magnetic resonance imaging (MRI) and their scans used to derive patient-specific models. Single-leg stance was modeled, constrained solely through physiologic joint contact, passive soft-tissue tension, extrinsic muscle force, body weight, and without assumptions of idealized mechanical joints. Surgical effect was quantified using simulated mediolateral (ML) and anteroposterior (AP) X-rays, pedobarography, soft-tissue strains, and joint contact force. Radiographic changes varied across states with the largest average improvements for the tendon transfer (TT) + 10 mm MCO state evidenced through ML and AP talo-1st metatarsal angles. Interestingly, 12 of 14 measures showed increased deformity following TT-only, though all increases disappeared with inclusion of MCO. Plantar force distributions showed medial forefoot offloading concomitant with increases laterally such that the most corrected state had 9.0% greater lateral load. Predicted alterations in spring, deltoid, and plantar fascia soft-tissue strain agreed with prior cadaveric and computational works suggesting decreased strain medially with successive surgical repair. Finally, joint contact force demonstrated consistent medial offloading concomitant with variable increases laterally. Rigid-body modeling thus offers novel advantages for the investigation of foot/ankle biomechanics not easily measured in vivo.

Following IRB approval, a cohort of 3-D rigid-body computational models was created from submillimeter MRIs of clinically diagnosed Adult Acquired Flatfoot Deformity patients and employed to investigate postoperative foot/ankle function and surgical effect during single-leg stance. Models were constrained through physiologic joint contact, passive soft-tissue tension, active muscle force, full body weight, and without idealized joints. Models were validated against patient-matched controls using clinically utilized radiographic angle and distance measures and plantar force distributions in the medial forefoot, lateral forefoot, and hindfoot. Each model further predicted changes in strain for the spring ligament, deltoid ligament, and plantar fascia, as well as joint contact loads for three midfoot joints, the talonavicular, navicular-1st cuneiform, and calcaneocuboid. Radiographic agreement ranged across measures, with average absolute deviations of

Adult acquired flatfoot deformity (AAFD) is a degenerative disease resulting in malalignment of the mid- and hindfoot secondary to posterior tibial tendon dysfunction and increasing implication of ligament pathologies. Despite the complex 3D nature of AAFD, 2D radiographs are still employed to diagnose and stage the disease. Computer modeling techniques allow for accurate 3D recreations of musculoskeletal systems for the investigation of biomechanical factors contributing to disease. Following Institutional Review Board approval, the lower limbs of six diagnosed AAFD sufferers were imaged with MRI, photographs, and X-ray. Next, a radiologist graded the MRI attenuation of eight soft-tissues implicated in AAFD. Six patient-specific rigid-body models were then created and loaded according to patient weight, graded soft-tissues, and extrinsic muscles. Model function was validated using clinically relevant kinematic measures in three planes. Agreement varied depending on the measure, with average absolute deviations of

Background context Traditional reconstruction for burst fractures involves columnar support with posterior fixation at one or two levels cephalad/caudad; however, some surgeons choose to only stabilize the vertebral column. Purpose The aim was to distinguish biomechanical differences in stability between a burst fracture stabilized through a lateral approach using corpectomy spacers of different end plate sizes with and without integrated screws and with and without posterior fixation. Study design/Setting This was an in vitro biomechanical study assessing thoracolumbar burst fracture stabilization. Methods Six human spines (T11–L3) were tested on a six-degrees-of-freedom simulator enabling unconstrained range of motion (ROM) at ±6 N·m in flexion-extension (FE), lateral bending (LB), and axial rotation (AR) after a simulated burst fracture at L1. Expandable corpectomy spacers with/without integrated screws (Fi/F; FORTIFY Integrated/FORTIFY; Globus Medical, Inc., Audubon, PA, USA) were tested with different end plate sizes (21×23 mm, 22×40–50 mm). Posterior instrumentation (PI) via bilateral pedicle screws and rods was used one level above and one level below the burst fracture. Lateral plate (LP) fixation was tested. Devices were tested in the following order: intact; Fi 21×23 ; Fi 21×23 +PI; F 21×23 +PI+LP; F 21×23 +LP; F 22×40–50 +LP; F 22×40–50 +PI+LP; Fi 22×40–50 +PI; Fi 22×40–50 . Results In FE and AR, constructs without PI showed no significant difference (p 22×40–50 +LP showed a significant increase in stability relative to intact, but no other construct without PI reached significance. In FE and LB, circumferential constructs were significantly more stable than intact. In AR, no construct showed significant differences in motion when compared with the intact condition. Conclusions Constructs without posterior fixation were the least stable of all tested constructs. Circumferential fixation provided greater stability in FE and LB than lateral fixation and intact. Axial rotation showed no significant differences in any construct compared with the intact state.

Adult acquired flatfoot deformity is a degenerative disease causing medial arch dysfunction. Surgical correction has typically involved tendon reconstruction with calcaneal osteotomy; however, the postoperative changes have not been fully characterized. The present study assessed the success of surgical correction of Stage IIb adult acquired flatfoot deformity through changes in plantar pressures and patient-generated outcome scores. With Institutional Review Board approval, 6 participants were evaluated before and after surgery using pedobarography, the Foot and Ankle Outcome Score, and the Medical Outcomes Study 36-item short-form questionnaire. The plantar pressures were recorded using a TekScan HRMat during walking and in a 1- and 2-foot stance. The resulting contour maps were segmented into 9 regions, with the peak pressure, normalized force, and arch index calculated. Surgical effects were analyzed using paired t tests. Postoperatively, the Foot and Ankle Outcome Score and Medical Outcomes Study 36-item short-form questionnaire scores increased significantly from 180 � 78 to 360 � 136 (p < .03) and 47 � 18 to 71 � 19 (p ¼ .06), respectively. During the 2-foot stance, the normalized force had increased significantly in the lateral midfoot (p < .03), although no significant differences were found in peak pressures. No significant differences were observed in the 1-foot stance. During walking, the normalized force increased significantly in the lateral midand forefoot (p < .05). The peak pressure increased significantly in the lateral forefoot (p < .01). The arch index values demonstrated no significant changes. The increased questionnaire scores indicated that surgical correction improved the self-perceived health of the participants. Lateral shifts in the peak pressure and normalized force suggest that forefoot and midfoot loading is altered postoperatively, consistent with the goal of offloading the dysfunctional arch. Thus, the present study has demonstrated that surgical treatment of adult acquired flatfoot deformity can be accurately assessed using patient-reported outcome measures and plantar pressures.

Adult Acquired Flatfoot Deformity (AAFD) is a degenerative disease characterized by chronic changes in the joint alignment of the bones of the foot leading to significant pain and dysfunction. The hallmark of this disease is the functional loss in posterior tibialis tendon (PTT) strength though mechanical degradation of passive support structures of the foot have also been implicated, namely the spring ligament, talocalcaneal interosseous ligaments, fibers of the anterior deltoid, and the long and short plantar ligaments. [1] Clinically, AAFD patients present with midfoot collapse, forefoot abduction, and valgus tilting of the hindfoot and the magnitudes of these deformities are most often graded using plane radiographs in the mediolateral (ML), oblique anteroposterior (AP) and posteroanterior (PA) views. [1–3] The objective of this study was to develop a population of patient-matched rigid-body kinematic models using a standardized methodology that can be used to predict pathologic foot function with agreement between patient and model assessed through clinically relevant radiographic joint angles.Copyright © 2013 by ASME

Adult acquired flatfoot deformity (AAFD) is a degenerative disease resulting in malalignment of the mid- and hindfoot secondary to posterior tibial tendon dysfunction and increasing implication of ligament pathologies. Despite the complex 3D nature of AAFD, 2D radiographs are still employed to diagnose and stage the disease. Computer modeling techniques allow for accurate 3D recreations of musculoskeletal systems for the investigation of biomechanical factors contributing to disease. Following Institutional Review Board approval, the lower limbs of six diagnosed AAFD sufferers were imaged with MRI, photographs, and X-ray. Next, a radiologist graded the MRI attenuation of eight soft-tissues implicated in AAFD. Six patient-specific rigid-body models were then created and loaded according to patient weight, graded soft-tissues, and extrinsic muscles. Model function was validated using clinically relevant kinematic measures in three planes. Agreement varied depending on the measure, with average absolute deviations of7° for angles and4 mm for distances. Additionally, the clinically favored AP talonavicular coverage angle, ML talo-1st metatarsal angle, and ML 1st cuneiform height showed strong correlations of R(2) = 0.63, 0.75, and 0.85, respectively. Thus, computer modeling offers a promising methodology for the non-invasive investigation of in vivo kinematic behavior in pathologic feet and, once validated, may further be used to investigate biomechanical parameters that are difficult to measure clinically.

Adult Acquired Flatfoot Deformity (AAFD) is a degenerative disease characterized by chronic changes in the joint alignment of the bones of the foot leading to significant pain and dysfunction. The early stages of the disease are thought to involve primarily the mechanical degradation of the soft-tissue support structures of the foot, namely the spring ligament, talocalcaneal interosseous ligaments, fibers of the anterior deltoid, and the long and short plantar ligaments, as well as a functional loss in posterior tibialis tendon (PTT) strength. [1] These changes manifest clinically as midfoot collapse, forefoot abduction, and valgus tilting hindfoot. [1–3] Various surgical corrections exist for Stage II AAFD to restore more normal biomechanical function to the foot. Treatment selection is most often based on clinical outcomes and surgeon preference. However, the optimal procedure(s) for an individual patient is unknown. Computer Aided Design (CAD) approaches offer advantages for evaluating foot function as well as the ability to predict pre-operatively the outcome of corrective procedures. This study developed a 3D patient specific computer model of the lower leg from a diagnosed Stage II flatfoot patient and evaluated its ability to predict foot function pre- and post-operatively through agreement with clinically relevant radiographic joint angles.Copyright © 2012 by ASME