Search

Cathode ray tube (CRT) monitors are electronic equipment mainly made of glass, polymers and metals. These devices became obsolete because of emerging technologies such as LCD, LED and plasma; thus generating a huge stockpile of e-waste worldwide. In this CRT study, a natural leaching simulation (NBR10005) was performed to determine the toxicity of this e-waste. The standard NBR 10005 procedure was performed for 7 different monitors. The results show all samples are hazardous according to local environmental law (NBR 10004) due to lead leaching. The CRT panel is lead free, while the CRT funnel and neck have about 20% of lead oxide in their composition. Moreover, six optimum thermal lead removal procedures were performed and the NBR 10005 procedure was repeated. The results reveal that vacuum atmosphere and the addition of 5% carbon graphite as reducing agent are optimum conditions to turn the CRT into a non-hazardous waste. Three out of six parameters were capable of satisfactorily removing the lead and turning the post-procedure waste lead-leaching safe.

The disposal of CRT monitors increases each year, generating millions of tons of waste containing various types of materials. The glass present in CRT tubes displayed about 20%-25% of lead oxide. If improperly disposed of, this glass can be leached directly in nature or may cause environmental contamination, especially with lead. Because of this leaching possibility, this waste is classified as Class I solid waste, according to the NBR 10004. Thermal processing of these glass tubes was seen as an alternative to remove lead from the glass matrix. Parameters such as reaction time, percentage of reducing agent, the reaction temperature, and atmospheric environment of the system were analyzed in this work. It was concluded that it is possible to remove the lead from the glass matrix by thermal processing. The removal of 92% of the lead from the glass was obtained at 800°C, a vacuum of 1.3 kPa, with 5% carbon as a reducing agent, and 18 hours of thermal processing.

E-waste contains a variety of valuable materials, such as metals, glass, plastics and other materials . Although recycling processes are usually planned for the metal fractions because of the economical value of this fraction, non-metallic fractions are gaining more attention, since the disposal of such material in landfills, or the burning of plastics can be associated to high environmental contamination . This chapter will discuss the general recycling of material from e-wastes.