Search

Functional electrical stimulation (FES) aims to improve the gait pattern in cases of weak foot dorsiflexion (foot lifter weakness) and, therefore, increase the liveability of people suffering from chronic diseases of the central nervous system, e.g., multiple sclerosis. One important component of FES is the detection of the knee angle in order to enable the situational triggering of dorsiflexion in the right gait phase by electrical impulses. This paper presents an alternative approach to sensors for motion capture in the form of weft-knitted strain sensors. The use of textile-based strain sensors instead of conventional strain gauges offers the major advantage of direct integration during the knitting process and therefore a very discreet integration into garments. This in turn contributes to the fact that the FES system can be implemented in the form of functional leggings that are suitable for inconspicuous daily use without disturbing the wearer unnecessarily. Different designs of the weft-knitted strain sensor and the influence on its measurement behavior were investigated. The designs differed in terms of the integration direction of the sensor (wale- or course-wise) and the width of the sensor (number of loops) in a weft-knitted textile structure.

Recently, there has been remarkable progress in the development of smart textiles, especially knitted strain sensors, to achieve reliable sensor signals. Stable and reliable electro-mechanical properties of sensors are essential for using textile-based sensors in medical applications. However, the challenges associated with significant hysteresis and low gauge factor (GF) values remain for using strain sensors for motion capture. To evaluate these issues, a comprehensive investigation of the cyclic electro-mechanical properties of weft-knitted strain sensors was conducted in the present study to develop a drift-free elastic strain sensor with a robust sensor signal for motion capture for medical devices. Several variables are considered in the study, including the variation of the basic knit pattern, the incorporation of the electrically conductive yarn, and the size of the strain sensor. The effectiveness and feasibility of the developed knitted strain sensors are demonstrated through an experimental evaluation, by determining the gauge factor, its nonlinearity, hysteresis, and drift. The developed knitted piezoresistive strain sensors have a GF of 2.4, a calculated drift of 50%, 12.5% hysteresis, and 0.3% nonlinearity in parts.

Lots of damaged fiber-reinforced plastic (FRP) components are replaced by new components instead of repairing. Furthermore, only very labor-intensive repair methods are available on the market to fully restore the integrity of the structure. This requires a high level of experience or, alternatively, very cost-intensive technology, such as the use of computer tomography and robotics. The high costs and CO2 emissions caused by the manufacture of FRP components then bear no relation to their service life. The research project IGF-21985 BR “FRP-Repair” aims to solve the named challenges. Using semiconductor oxide catalysts, the matrix can be locally depolymerized by ultraviolet (UV) radiation, and thus removed from the damaged area of the FRP component. Subsequently, the damaged fibers in this area can be detached. By using customized textile repair patches and local thermoset reinfiltration, the repair area is restored. With this process, the fiber structure can be repaired locally with new fibers on the textile level. The repair is similar to the original production of a fiber composite in an infusion process. No additional adhesive material is used. As a result, repaired FRP structures with restored mechanics and a near-original surface can be realized. This article provides an insight into the actual steps of the development of the FRP component repair process using dry textile patches. The empirical investigation of overlapped rovings and UD material showed the expected results. Residual fracture forces of up to 86% could be achieved. The most interesting approach on the roving level was splicing the overlapping fibers. The free ends of the fibers of the patch and part are mechanically bonded. This bond at the textile level is further strengthened by infusion with matrix.

Abstract The models for textile structures based on the Finite Element Method (FEM) are diverse. In general, they can be divided into three groups based on their length scale: macro‐, meso‐, and micro‐scale models. The macro‐scale models are the simplest approach and require the least computational cost. On the contrary, the micro‐scale models are the most realistic and complex, thus involving extremely high computational costs. The meso‐scale models stand in the middle with sufficient representation degree at a reasonable computational cost. Every group of models has its own advantageous application field. For the forming process of 3D preforms, macro‐scale models have been widely used. As computational costs drop over time, meso‐scale models become more and more favorable. Hence, research efforts increasingly focus on meso‐scale models. In this paper, the modeling methods of FEM meso‐scale models for plain woven fabric made of glass roving and biaxial reinforced weft‐knitted fabric made of carbon fiber/polyamide 6.6 hybrid yarns are introduced. The experimental tests are used to characterize the mechanical properties of the yarns and fabrics. Different modeling methods for the geometries of each type of fabric are described. The mechanical behavior of the models is calibrated and validated with the help of a series of test simulations. Examples for the usage of the introduced models are presented.

Functional electrical stimulation (FES) aims to improve the gait pattern in case of foot drop of people suffering chronic diseases, e.g., multiple sclerosis. The fibular nerve can be stimulated by electrical impulses sent through electrodes on the skin, which leads to the contraction of the corresponding muscles. One major disadvantage of commercial FES devices is their bulky design. The paper presents an alternative approach of weft-knitted strain sensors that are directly integrated into the knee area of a functional legging suitable for daily use. To initiate electrical impulses for FES at the right time, the textile strain sensors are used as soft triggers.

Carbon fibres (CF) are used in CF reinforced plastic (CFRP) components. However, waste from CF yarn trim, CFRP and the end of life (EOL) CFRP structures will cause a recycling challenge in the next decades because of strict environmental regulations. Currently, recycling is carried out almost entirely by the use of pyrolysis to regain CF as a valuable resource. This high temperature process is energy consuming, and the resulting fibres are brittle. Hence, they are not suitable for processing of textiles into yarns or new reinforcement structures. To enable grave to cradle processing, a new approach based on a solvolysis recovery of CF and subsequent yarn spinning to obtain hybrid yarns suitable for textile processing, especially by weft knitting, was the focus of the international research project IGF/CORNET 256EBR. For the first time, it was possible to process hybrid yarns made of rCF on a weft knitting machine to produce biaxial reinforced structures to form CFRP from recycled carbon fibres. Therefore, various modifications were done on the textile machinery. In this way, it was possible to process the rCF and to get out a reproducible textile structure for the production of 3D recycled CFRP (rCFRP) parts.

Adaptive structures based on fiber-rubber composites with integrated Shape Memory Alloys are promising candidates for active deformation tasks in the fields of soft robotics and human-machine interactions. Solid-body hinges improve the deformation behavior of such composite structures. Textile technology enables the user to develop reinforcement fabrics with tailored properties suited for hinged actuation mechanisms. In this work, flat knitting technology is used to create biaxially reinforced, multilayer knitted fabrics with hinge areas and integrated Shape Memory Alloy wires. The hinge areas are achieved by dividing the structures into sections and varying the configuration and number of reinforcement fibers from section to section. The fabrics are then infused with silicone, producing a fiber-rubber composite specimen. An existing simulation model is enhanced to account for the hinges present within the specimen. The active deformation behavior of the resulting structures is then tested experimentally, showing large deformations of the hinged specimens. Finally, the simulation results are compared to the experimental results, showing deformations deviating from the experiments due to the developmental stage of the specimens. Future work will benefit from the findings by improving the deformation behavior of the specimens and enabling further development for first applications.

Fiber-reinforced rubber composites with integrated shape memory alloy (SMA) actuator wires present a promising approach for the creation of soft and highly elastic structures with adaptive functionalities for usage in aerospace, robotic, or biomedical applications. In this work, the flat-knitting technology is used to develop glass-fiber-reinforced fabrics with tailored properties designed for active bending deformations. During the knitting process, the SMA wires are integrated into the textile and positioned with respect to their actuation task. Then, the fabrics are infiltrated with liquid silicone, thus creating actively deformable composites. For dimensioning such structures, a comprehensive understanding of the interactions of all components is required. Therefore, a simulation model is developed that captures the properties of the rubber matrix, fiber reinforcement, and the SMA actuators and that is capable of simulating the active bending deformations of the specimens. After model calibration with experimental four-point-bending data, the SMA-driven bending deformation is simulated. The model is validated with activation experiments of the actively deformable specimens. The simulation results show good agreement with the experimental tests, thus enabling further investigations into the deformation mechanisms of actively deformable fiber-reinforced rubbers.

Today, numerous carbon fiber (CF) reinforced plastic (CFRP) components are in continuous usage under harsh environmental conditions. New components often replace damaged structural parts in safety-critical applications. In addition to this, there is also no effective repair method to initially restore the mechanics of these structures using dry fiber material. The high costs of CFRP components are not in proportion to their lifetime. The research project IGF-19946 BR “CFRP-Repair” addresses this specific challenge. By using an oxide semiconductor that is activated by ultraviolet (UV) irradiation, the thermoset matrix can be depolymerized and thus locally removed from the damaged CFRP component. Afterward, the harmed fibers can be physically removed from the laminate in this certain area. A load-adjusted tailored fiber reinforcement patch is subsequently applied and consolidated by local thermoset re-infiltrating. Using this procedure, the structure can be locally repaired with new CF. As a result, repaired CFRP structures can be obtained with reduced mechanics and an approximately original surface. This article gives an insight into the developed repair procedure of CFRP components in an innovative and more efficient way than the state-of-the-art.

The present study proposed a novel process for the matrix decomposition of carbon-fiber-reinforced plastics (CFRPs). For this purpose, the influence of ultraviolet (UV) radiation paired with semiconductors on CFRP was analyzed. Then, suitable process parameters for superficial and in-depth matrix decomposition in CFRP were evaluated. The epoxy resin was decomposed most effectively without damaging the embedded carbon fiber by using a UV light-emitting diode (LED) spotlight (395 nm, Semray 4103 by Heraeus Noblelight) at a power level of 66% compared to the maximum power of the spotlight. Using a distance of 10 mm and a treatment duration of only 35–40 s achieved a depth of two layers with an area of 750 mm2, which is suitable for technological CFRP repair procedures. In addition to the characterization of the process, the treated CFRP samples were analyzed based on several analytical methods, namely, light microscopy (LM), scanning electron microscopy (SEM), and atomic force microscopy (AFM). Subsequently, the prepared carbon fibers (CFs) were tested using filament tensiometry, single filament tensile tests, and thermogravimetric measurements. All analyses showed the power level of 66% to be superior to the use of 96% power. The gentle (“fiber friendly”) matrix destruction reduced the damage to the surface of the fibers and maintained their properties, such as maximum elongation and maximum tensile strength, at the level of the reference materials.

Function-integrative textiles bear the potential for a variety of applications in the medical field. Recent clinical investigations suggest that the application of a function-integrative fabric could have a positive impact on currently applied diagnostic procedures of a specific type of tumour. In this context, the fabric should enable local warming of a patient’s upper extremity as well as blood flow measurement. Existing solutions comprise a warming system but lack a measuring apparatus for blood flow determination. With regard to the quality of results of current diagnostic procedures, the local warming of the patients’ upper extremity and the simultaneous determination of the blood flow plateau are crucial. In the present paper, the development process of a function-integrative sleeve is introduced. Besides the development of an adaptable sleeve-design, the manufacturing process of an integrated warming system was also addressed. Furthermore, the identification of crucial physiological effects, using a Laser Doppler Perfusion Monitor, is introduced. During testing of the function-integrative sleeve, modulation of the desired physiological effects was observed. The results support the initial assumptions and dictate further investigations on increasing user-friendliness and cost-efficiency during adjusting and determining the physiological effects in the course of tumour diagnosis.