Search

We have been studying Lynx, an X-ray Observatory with factors of 10 to 1000 greater imaging and spectroscopic capabilities than any other existing or planned facility. We present a Design Reference Mission (DRM) driven by the need to solve fundamental problems in three broad areas of astrophysics. The Lynx Observatory will provide discovery space for all of astrophysics, and also address questions which will only be revealed as our knowledge increases. Studies supported by the Advanced Concepts Office at MSFC for the observatory design and operations take advantage of the highly successful architecture of the Chandra Observatory. A light-weight mirror with 30 times the Chandra effective area, and modern microcalorimeter and CMOS based X-ray imagers will exploit the 0.5 arcsec imaging capability. Operating at Sun/Earth L2, we expect 85% to 90% of the time to be spent acquiring data from celestial targets. Designed for a five year baseline mission, there are no expected impediments to achieving a 20 year goal. This paper presents technical details of the Observatory and highlights of the mission operations.

Adjustable X-ray optics is the technology under study by SAO and PSU for the realization of the proposed X-ray telescope Lynx. The technology is based on thin films of lead-zirconate-titanate (PZT) deposited on the back of thermally formed thin substrates, and represents a potential solution to the challenging trade-off between high-surface quality and low mass, that limits the performance of current generation of X-ray telescopes. The technology enables the correction of mirror fabrication figure, mounting induced distortions, and on-orbit correction for variations in the mirror thermal environment. We describe the current state of development, presenting updated test data, anticipation of performances and expectations.

The combination of the hot slumping and the Ion Beam Figuring (IBF) technologies can be a very competitive solution for the realization of x-ray optics with excellent imaging capabilities and high throughput. While very thin mirrors segments can be realized by slumping with residual figure errors below few hundreds of nanometres, a non-contact and deterministic process (dependent on dwell time), like IBF, is a very effective post facto correction, as it avoids all the problems due to the handling and the supporting system. In the last years, the two processes were proven compatible with very thin sheet of Eagle XG glasses (0.4 mm thickness). Nevertheless, the fast convergence of the process is a key factor to limit the cost of the mirror plate production. A deeper characterization of removal function stability showed that its repeatability between each run has to be improved for a real enhancement of the process convergence factor. A new algorithm based on de-convolution has been implemented and tested, with important advantages in terms of calculation speed, minimum material removal and optimization possibilities. By analysing the metrological data of test slumped glasses, we showed how the IBF is effective in the correction of figure errors on scales above 8 - 10 mm. An overall figuring time of few hours is required with surface error around 100 nm rms. Thanks to the thickness measurement data, which are performed in transmission mode with an interferometric set-up, we demonstrated that it is possible to disentangle the effective amount of the material removed and the deformations introduced during the process.

The proposed Lynx telescope is an X-ray observatory with Chandra-like angular resolution and about 30 times larger effective area. The technology under development at SAO is based on the deposition of piezoelectric material on the back of glass substrates, used to correct longer wavelength figure errors. This requires a large number (about 8000) of figured segments with sufficient quality to be in the range of correctibility of the actuators. Thermal forming of thin glass offers a convenient approach, being based on intrinsically smooth surfaces (which doesn’t require polishing or machining), available in large quantity and at a low cost from flat display industry. Being a replica technique, this approach is particularly convenient both for development and for the realization of modular/segmented telescopes. In this paper we review the current status and the most recent advances in the thermal forming activities at SAO, and the perspectives for the employment of these substrates for the adjustable X-Ray optics.

The high-quality surface characteristics, both in terms of figure error and of micro-roughness, required on the mirrors of a high angular resolution x-ray telescope are challenging, but in principle well suited with a deterministic and non-contact process like the ion beam figuring. This process has been recently proven to be compatible even with very thin (thickness around 0.4mm) sheet of glasses (like D263 and Eagle). In the last decade, these types of glass have been investigated as substrates for hot slumping, with residual figure errors of hundreds of nanometres. In this view, the mirrors segments fabrication could be envisaged as a simple two phases process: a first replica step based on hot slumping (direct/indirect) followed by an ion beam figuring which can be considered as a post-fabrication correction method. The first ion beam figuring trials, realized on flat samples, showed that the micro-roughness is not damaged but a deeper analysis is necessary to characterize and eventually control/compensate the glass shape variations. In this paper, we present the advancements in the process definition, both on flat and slumped glass samples.

Piezoelectric adjustable optics are being developed for high throughput, high resolution, low mass Xray mirror assemblies. These optics require robust piezoelectric thin films and reproducible lithographic patterning on curved glass substrates. This work details the cleaning of Corning Eagle XG glass substrates for thin shell X-ray mirrors by a three stage acid and solvent cleaning procedure before a 0.02 μm Ti adhesion layer and a 0.1 μm Pt bottom electrode layer was deposited using DC magnetron sputtering. Piezoelectric Pb(Zr0.52Ti0.48)0.99Nb0.01O3 thin films with a thickness of 1.5 μm were then deposited by radio frequency magnetron sputtering in three 0.5 µm layers with intermittent annealing steps in a rapid thermal annealing furnace at 650°C for 60 seconds. Defects observed in the piezoelectric thin films were linked to residue remaining on the glass after cleaning. 112 piezoelectric cells and 100 μm wide conductive Pt traces were patterned using bilayer photolithography. The photoresist layers were deposited using spin coating at 2000 and 4000 RPM to achieve uniform 1 μm thick layers, resulting in reproducibly resolved features with limiting resolutions of approximately >25 μm. The resulting mirror pieces achieved a 100% yield, with average relative permittivity of 1270, dielectric loss 0.047, coercive field 30 kV/cm and remanent polarization of 20 μC/cm2 . While the defects observed in the films appeared to have not influence on the electrical properties, additional cleaning steps using DI water were proposed to further reduce their presence.

Thin x-ray optics with high angular resolution (≤ 0.5 arcsec) over a wide field of view enable the study of a number of astrophysically important topics and feature prominently in Lynx, a next-generation x-ray observatory concept currently under NASA study. In an effort to address this technology need, piezoelectrically adjustable, thin mirror segments capable of figure correction after mounting and on-orbit are under development. We report on the fabrication and characterization of an adjustable cylindrical slumped glass optic. This optic has realized 100% piezoelectric cell yield and employs lithographically patterned traces and anisotropic conductive film connections to address the piezoelectric cells. In addition, the measured responses of the piezoelectric cells are found to be in good agreement with finite-element analysis models. While the optic as manufactured is outside the range of absolute figure correction, simulated corrections using the measured responses of the piezoelectric cells are found to improve 5 to 10 arcsec mirrors to 1 to 3 arcsec [half-power diameter (HPD), single reflection at 1 keV]. Moreover, a measured relative figure change which would correct the figure of a representative slumped glass piece from 6.7 to 1.2 arcsec HPD is empirically demonstrated. We employ finite-element analysis-modeled influence functions to understand the current frequency limitations of the correction algorithm employed and identify a path toward achieving subarcsecond corrections.

Lynx, one of the four strategic mission concepts under study for the 2020 Astrophysics Decadal Survey, provides leaps in capability over previous and planned x-ray missions and provides synergistic observations in the 2030s to a multitude of space- and ground-based observatories across all wavelengths. Lynx provides orders of magnitude improvement in sensitivity, on-axis subarcsecond imaging with arcsecond angular resolution over a large field of view, and high-resolution spectroscopy for point-like and extended sources in the 0.2- to 10-keV range. The Lynx architecture enables a broad range of unique and compelling science to be carried out mainly through a General Observer Program. This program is envisioned to include detecting the very first seed black holes, revealing the high-energy drivers of galaxy formation and evolution, and characterizing the mechanisms that govern stellar evolution and stellar ecosystems. The Lynx optics and science instruments are carefully designed to optimize the science capability and, when combined, form an exciting architecture that utilizes relatively mature technologies for a cost that is compatible with the projected NASA Astrophysics budget.

Piezoelectric adjustable x-ray optics use magnetron sputtered thin film coatings on both sides of a thin curved glass substrate. To produce an optic suitable for a mission requiring high-angular resolution like “Lynx,” the integrated stresses (stress×thickness) of films on both sides of the optic must be approximately equal. Thus, understanding how sputtered film thickness distributions change for convex and concave curved substrates is necessary. To address this, thickness distributions of piezoelectric Pb0.995(Zr0.52Ti0.48)0.99Nb0.01O3 films are studied on flat, convex, and concave cylindrical substrates with a 220-mm radius of curvature. A mathematical model of the film thickness distribution is derived based on the geometric properties of the sputter tool and the substrate, and film thicknesses deposited with a commercially available sputtering tool are measured with spectroscopic ellipsometry. Experiment and modeled results for flat and convex curved substrates demonstrate good agreement, with average relative thickness distribution difference of 0.19% and −0.10% respectively, and a higher average difference of 1.4% for concave substrates. The calculated relative thickness distributions are applied to the convex and concave sides of a finite-element analysis (FEA) model of an adjustable x-ray optic prototype. The FEA model shows that, left uncorrected, the relative film thickness variation will yield an optic with an optical performance of 2.6 arc sec half power diameter (HPD) at 1 keV. However, the mirror figure can be corrected to diffraction-limited performance (0.3 arc sec HPD) using the piezoelectric adjusters, suggesting that the tolerances for applying a balanced integrated stress on both sides of a mirror are alleviated for adjustable x-ray optics as compared to traditional static x-ray mirrors. Furthermore, the piezoelectric adjusters will also allow changes in mirror figure over the telescope lifetime due to drift in the stress states of the x-ray surfaces to be corrected on orbit.

In order to advance significantly scientific objectives, future x-ray astronomy missions will likely call for x-ray telescopes with large aperture areas (≍ 3 m2) and fine angular resolution (≍ 12). Achieving such performance is programmatically and technologically challenging due to the mass and envelope constraints of space-borne telescopes and to the need for densely nested grazing-incidence optics. Such an x-ray telescope will require precision fabrication, alignment, mounting, and assembly of large areas (≍ 600 m2) of lightweight (≍ 2 kg/m2 areal density) high-quality mirrors, at an acceptable cost (≍ 1 M$/m2 of mirror surface area). This paper reviews relevant programmatic and technological issues, as well as possible approaches for addressing these issues-including direct fabrication of monocrystalline silicon mirrors, active (in-space adjustable) figure correction of replicated mirrors, static post-fabrication correction using ion implantation, differential erosion or deposition, and coating-stress manipulation of thin substrates....

Lynx, a next generation X-ray observatory concept currently under study, requires lightweight, high spatial resolution X-ray mirrors. Here we detail the development and fabrication of one of the candidate technologies for Lynx, piezoelectric adjustable X-ray optics. These X-ray mirrors are thin glass shell mirrors with Cr/Ir X-ray reflective coatings on the mirror side and piezoelectric thin film actuators on the actuator side. Magnetron sputtering was used to deposit metal electrodes and metal-oxide piezoelectric layers. The piezoelectric (Pb0.995(Zr0.52Ti0.48)0.99Nb0.01O3) was divided into 112 independent piezoelectric actuators, with 100% yield achieved. We discuss the fabrication procedure, residual thermal stresses and tuning of the Cr/Ir coating stress for the purposes of stress balancing.

Diffusion tensor magnetic resonance imaging (DTI) provides data concerning water diffusion in the spinal cord, from which white matter tracts may be inferred, and connectivity between spinal cord segments may be determined. We evaluated this potential application by imaging spinal cords from normal adult rats and rats that received cervical lateral funiculotomies, disrupting the rubrospinal tract (RST). Vitrogen and fibroblasts were transplanted into the surgical lesion at time of injury in order to fill the cavity. At 10 weeks, animals were sacrificed; the spinal cords were dissected out and then imaged in a 9.4-Tesla magnet. DTI tractography demonstrated the disruption of the rubrospinal tract axons while indicating which axon tracts were preserved. Additionally, DTI imaging could identify the orientation of glial processes in the gray matter adjacent to the site of injury. In the injured animals, reactive astrocytes in adjacent gray matter appeared to orient themselves perpendicular to white matter tracts. In summary, DTI identified not only white matter disruption following injury, but could distinguish the orientation of the accompanying glial scar.

Following spinal cord injury, diffusion MRI (DWI) has been shown to detect injury and functionally significant neuroprotection following treatment that otherwise would go undetected with conventional MRI. The underlying histologic correlates to directional apparent diffusion coefficients (ADC) obtained with DWI have not been determined, however, and we address this issue by directly correlating ADC values with corresponding axon morphometry in the normal rat cervical spinal cord. ADC values transverse (perpendicular) and longitudinal (parallel) to axons both correlate with axon counts, however each directional ADC reflects distinct histologic parameters. DWI may therefore be capable of providing specific histologic data regarding the integrity of white matter.

BACKGROUND Spontaneous and complete regression of intracranial arteriovenous malformations (AVMs) is a rare occurrence, with only 59 angiographically proven cases reported in the English literature. We present three new cases and perform a literature review to determine possible mechanisms underlying this unusual phenomenon. METHODS Three patients with angiographically proven AVMs demonstrated complete obliteration of the AVM on follow-up angiography. Two patients had MRIs performed at the time of follow-up angiography. RESULTS A literature review of all reported cases shows that the vast majority (88%) of spontaneously closing AVMs had a single draining vein as did our three cases. In addition, hemodynamic alterations of intracranial (IC) blood flow, including intracranial hemorrhage, were seen in a majority (79%) of patients, including two of our three cases. MRI was performed in two of our three cases and showed a thrombosed-draining vein in both. CONCLUSIONS Complete spontaneous regression of intracranial AVMs is a rare occurrence. The phenomenon seems to require the interaction of hemodynamic changes in compromising or closing the limited, usually single, venous drainage pathway from the AVM. Hemorrhage may contribute to the effect by further compromising flow though the lesion, or it may merely be a phenomenon associated with the effects of venous hypertension on the AVM nidus.

The use of thrombolytic agents in the setting of established cerebral infarction is limited by concerns for hemorrhagic transformation. Novel thrombolytic approaches, which have received minimal consideration, may be associated with lower risks of hemorrhage. We illustrate vertebrobasilar thrombolysis with intravenous tirofiban, a selective platelet glycoprotein IIb/IIIa receptor antagonist, and discuss the potential thrombolytic properties of this class of antithrombotics.

P osttraumatic syringomyelia, or progressive posttraumatic cystic myelopathy, is a complication of spinal cord injury that affects as many as 3.2% of spinal cord patients overall but as many as 8% of patients suffering from complete quadriplegia [11. Time of onset after injusy ranges from 2 months to 30 years, and the most common mitial complaint is pain [1-3]. Other symptoms indude sensoty loss, motor weakness, increased or decreased spasticity, autonomic dysreflexia, hyperhidrosis (above level of injury), sphincter loss or sexual dysfunction, Homer’s syndrome, respiratory insufficiency, and death [3]. The sen5OI3P dysfunction is classically described as dista.l loss of pain and temperature sensation with preservation of proprioceptive sensation and light touch [1, 3, 4].

Human recombinant activated factor-VII (rFVIIa) has been used successfully in the treatment of spontaneous intracerebral hemorrhage. In addition, there is increasing interest in its use to treat uncontrolled bleeding of other origins, including trauma. The aim of this study was to evaluate the safety and potential effectiveness of rFVIIa to mitigate bleeding using a clinically relevant model of traumatic brain injury (TBI) in the pig. A double injury model was chosen consisting of (1) an expanding cerebral contusion induced by the application of negative pressure to the exposed cortical surface and (2) a rapid rotational acceleration of the head to induce diffuse axonal injury (DAI). Injuries were performed on 10 anesthetized pigs. Five minutes after injury, 720 μg/kg rFVIIa (n = 5) or vehicle control (n = 5) was administered intravenously. Magnetic resonance imaging (MRI) studies were performed within 30 min and at 3 days post-TBI to determine the temporal expansion of the cerebral contusion. Euthanasia and histopathologic analysis were performed at day 3. This included observations for hippocampal neuronal degeneration, axonal pathology and microclot formation. The expansion of contusion volume over the 3 days post-injury period was reduced significantly in animals treated with rFVIIa compared to vehicle controls. Surprisingly, immunohistochemical analysis demonstrated that the number of dead/dying hippocampal neurons and axonal pathology was reduced substantially by rFVIIa treatment compared to vehicle. In addition, there was no difference in the extent of microthrombi between groups. rFVIIa treatment after TBI in the pig reduced expansion of hemorrhagic cerebral contusion volume without exacerbating the severity of microclot formation. Finally, rFVIIa treatment provided a surprising neuroprotective effect by reducing hippocampal neuron degeneration as well as the extent of DAI.

To examine the relation between low-contrast letter acuity, an emerging visual outcome for multiple sclerosis (MS) clinical trials, and brain MRI abnormalities in an MS cohort.T2 lesion volume and brain parenchymal fraction were determined for whole brain and within visual pathway regions of interest. Magnetization transfer ratio histograms were examined. Vision testing was performed binocularly using low-contrast letter acuity (2.5%, 1.25% contrast) and high-contrast visual acuity (VA). Linear regression, accounting for age and disease duration, was used to assess the relation between vision and MRI measures.Patients (n = 45) were aged 44 +/- 11 years, with disease duration of 5 years (range1 to 21), Expanded Disability Status Scale score of 2.0 (0 to 6.0), and binocular Snellen acuity of 20/16 (20/12.5 to 20/25). The average T2 lesion volume was 18.5 mm(3). Patients with lower (worse) low-contrast letter acuity and high-contrast VA scores had greater T2 lesion volumes in whole brain (2.5% contrast: p = 0.004; 1.25%: p = 0.002; VA: p = 0.04), Area 17 white matter (2.5%: p0.001; 1.25%: p = 0.02; VA: p = 0.01), and optic radiations (2.5%: p = 0.001; 1.25%: p = 0.02; VA: p = 0.007). Within whole brain, a 3-mm(3) increase in lesion volume corresponded, on average, to a 1-line worsening of low-contrast acuity, whereas 1-line worsening of high-contrast acuity corresponded to a 5.5-mm(3) increase.Low-contrast letter acuity scores correlate well with brain MRI lesion burden in multiple sclerosis (MS), supporting validity for this vision test as a candidate for clinical trials. Disease in the postgeniculate white matter is a likely contributor to visual dysfunction in MS that may be independent of acute optic neuritis history.

Purpose To determine whether differences in specific spinal cord white matter (WM) tracts can be detected with in vivo DTI. Materials and Methods In vivo DTI was performed on six rats at the lower thoracic region using a 4.7T magnet. Axial diffusion images were obtained with diffusion gradients applied in six independent directions, with low and high b-values equal to 0 and 692 seconds/mm2, respectively. Regions of interest (ROIs) were selected corresponding to the major spinal cord tracts, including the dorsal cortical spinal tract (dCST), fasciculus gracilis (FG), rubrospinal tract (RST), vestibulospinal tract (VST), and reticulospinal tract (ReST). Results ANOVA demonstrated overall differences between tracts for all of the DTI parameters, including fractional anisotropy (FA), trace diffusion (Tr), longitudinal diffusivity (EL = λ1), and transverse diffusivity (ET = (λ2 + λ3)/2). Similarly to previous ex vivo analyses, the spinal cord tract with the largest and most widely spaced axons (VST) had the largest EL and ET. Conclusion The principal diffusivities appear to reflect axon morphologic differences between the WM tracts that are not as well appreciated with FA and Tr. J. Magn. Reson. Imaging 2006. © 2006 Wiley-Liss, Inc.

Background Bilateral aortic origins of the vertebral arteries are a rare anatomic variant, with fewer than 20 cases reported in the literature. This particular variant has only been reported twice. Case Description A 35-year-old woman presented to the emergency department after trauma to the head and a witnessed convulsion. Subsequent workup included MRI/MRA, which resulted in identification of the anomaly. Conclusion The clinical importance of aortic arch anomalies lies in that it may be a source of misinterpretation, as one may conclude occlusion of the vertebral artery if the aberrant origin is not included in the MRA or CTA imaging parameters. Therefore, it is important to scan through the entire aortic arch to just below the level of the ligamentum arteriosum when performing these noninvasive modalities. In addition, vertebral arteries arising from the aortic arch have an increased risk of dissection.

BACKGROUND AND PURPOSE: Abnormal apparent diffusion coefficient (ADC) values in injured spinal cord white matter and fibroblast transplants have been shown to correspond with qualitative histologic findings of axonal loss or regeneration. We proposed that ADC values would correlate with quantitative axonal tracing in the transected rubrospinal tract (RST). METHODS: Eleven rats received right-sided lateral funiculus lesions at C3–4 (disrupting the RST) and transplantation of fibroblasts that were unmodified or modified to secrete brain-derived neurotrophic factor (BDNF). Behavioral tests measured hindlimb function at 1, 2, 4, 6, 8, 10, and 12 weeks after injury. At 12 weeks after injury, the antegrade axon tracer biotinylated dextran amine was stereotactically injected into the red nucleus to label the injured RST axons. Animals were sacrificed 2 weeks later. Diffusion-weighted MR imaging of the excised, fixed spinal cord specimens was then performed at 9.4 T. RESULTS: In white matter surrounding transplants, ADC values transverse to axons were elevated and ADC values longitudinal to axons were decreased. These ADC values were more abnormal closer to the transplant, and this correlated with decreases in numbers of labeled RST axons. ADC values in BDNF-expressing fibroblast transplants were significantly lower than those in unmodified fibroblast transplants, and these lower values correlated with decreased axonal dieback. Behaviorally, all animals showed partial recovery, but animals with BDNF-expressing fibroblast transplants had slightly improved hindlimb function compared to those with unmodified fibroblast transplants. CONCLUSION: ADC values may be able to evaluate graft function after spinal cord injury by demonstrating the degree of axonal dieback and preservation.

NMR q-space imaging is a method designed to obtain information from porous materials where diffusion-diffraction phenomena were observed from which pore size was derived. Recently, the technique has been applied to the study of biological structures as well. Although diffusive diffraction has so far not been observed in multicellular systems, displacement profiles have been used with some success as a means to estimate structure size. However, there have been no quantitative correlations of the retrieved structure sizes with histology. Clearly, the complexity of tissue architecture poses significant challenges to the interpretation of q-space data. In this work, simulations were first performed on a two-compartment model to demonstrate the effects of interference of the diffraction patterns arising from intra and extra-axonal compartments and finite boundary permeability on q-space data. Second, q-space echo attenuation was simulated on the basis of histologic images of various rat spinal cord fiber tracts and the information obtained from the displacement profiles were compared with structural parameters computed from the histologic images. The results show that calculated mean displacements and kurtosis parallel mean axon size and axonal density. Finally, spatially localized q-space measurements were carried out at the locations where simulations had previously been performed, resulting in displacement data that support those obtained by simulation. The data suggest the NMR q-space approach has potential for nondestructive analysis of the axonal architecture in the mammalian spinal cord.

We report two patients with migraine, acute visual field defects and other neurological symptoms who were found to have high T2 signal and FLAIR abnormalities on brain MRI in temporal and parieto-occipital regions. In these patients, the apparent diffusion coefficient (ADC) of their lesions was increased, distinguishing these lesions from those of ischemic stroke. Both were ultimately diagnosed with mitochondrial myopathy, encephalopathy, lactic acidosis and stroke-like episodes (MELAS). We conclude that conventional MRI when used with diffusion-weighted MR imaging may be invaluable in detecting mitochondrial-related CNS dysfunction.

Diffusion-based magnetic resonance imaging (MRI) (DWI) has been shown experimentally to detect both injury and functionally significant neuroprotection of injured spinal cord white matter that would otherwise go undetected with conventional MRI techniques. The diffusion of water in the central nervous system (CNS) is thought to be affected by both its location (intracellular or extracellular), and by diffusion barriers formed by cell membranes and myelin sheaths. There is, however, controversy concerning how to obtain, interpret, and present DWI data. Computer simulations and MR microscopy have been helpful in resolving some of these issues, as well as determining exact histologic correlates to DWI findings.

Spinal cord DWI may be useful in providing information not available with conventional MR imaging. More work, however, is required to explain what the qualitative and quantitative results actually represent. Computer simulations and detailed radiologic-histologic correlations will therefore be necessary.

Metastases to the bones of the foot from prostate carcinomas are rare and usually are associated with diffuse metastatic disease. The authors encountered a patient who presented with prostate carcinoma metastases limited to the right foot. Magnetic resonance imaging correlation in this case demonstrated normal marrow signal in the surrounding bones of the foot and increased vascularity of the foot.