Search

The recent discovery of high-temperature, high-pressure superconductors, such as hydrides and nickelates, has opened exciting avenues in studying high-temperature superconductivity. The primary superconducting properties of these materials are well characterized by measuring various electrical and magnetic properties, despite the challenges posed by the high-pressure environment. Experimental microscopic insight into the pairing mechanism of these superconductors is even more challenging, due to the lack of direct probes of the superconducting gap structures at high pressure conditions. Here, we have developed a planar tunnel junction technique for diamond anvil cells and present ground-breaking tunneling spectroscopy measurements at megabar pressures. We determined the superconducting gap of elemental sulfur at 160 GPa, a key constituent of the high-temperature superconductor H_{3}S. High quality tunneling spectra indicate that β-Po phase sulfur is a type II superconductor with a single s-wave gap with a gap value 2Δ(0)=5.6  meV. This technique is compatible with superconducting compounds synthesized in diamond anvil cells and provides insight into the pairing mechanism in novel superconductors under high-pressure conditions.

The robust evidence and reproducibility of high-temperature superconductivity in hydrogen-rich materials under challenging experimental conditions of megabar pressures is presented., (© The Author(s) 2024. Published by Oxford University Press on behalf of China Science Publishing & Media Ltd.)

The recent progress in generating static pressures up to terapascal values opens opportunities for studying novel materials with unusual properties, such as metallization of hydrogen and high-temperature superconductivity. However, an evaluation of pressure above ~0.3 terapascal is a challenge. We report a universal high-pressure scale up to ~0.5 terapascal, which is based on the shift of the Raman edge of stressed diamond anvils correlated with the equation of state of Au and does not require an additional pressure sensor. According to the new scale, the pressure values are substantially lower by 20% at ~0.5 terapascal compared to the extrapolation of the existing scales. We compare the available data of H 2 at the highest static pressures. We show that the onset of the proposed metallization of molecular hydrogen reported by different groups is consistent when corrected with the new scale and can be compared with various theoretical predictions., (© 2023. The Author(s).)

In the last few years, the superconducting transition temperature, T c , of hydrogen-rich compounds has increased dramatically, and is now approaching room temperature. However, the pressures at which these materials are stable exceed one million atmospheres and limit the number of available experimental studies. Superconductivity in hydrides has been primarily explored by electrical transport measurements, whereas magnetic properties, one of the most important characteristic of a superconductor, have not been satisfactory defined. Here, we develop SQUID magnetometry under extreme high-pressure conditions and report characteristic superconducting parameters for Im-3m-H 3 S and Fm-3m-LaH 10 -the representative members of two families of high-temperature superconducting hydrides. We determine a lower critical field H c1 of ∼0.82 T and ∼0.55 T, and a London penetration depth λ L of ∼20 nm and ∼30 nm in H 3 S and LaH 10 , respectively. The small values of λ L indicate a high superfluid density in both hydrides. These compounds have the values of the Ginzburg-Landau parameter κ ∼12-20 and belong to the group of "moderate" type II superconductors, rather than being hard superconductors as would be intuitively expected from their high T c s., (© 2022. The Author(s).)

Designing materials with advanced functionalities is the main focus of contemporary solid-state physics and chemistry. Research efforts worldwide are funneled into a few high-end goals, one of the oldest, and most fascinating of which is the search for an ambient temperature superconductor (A-SC). The reason is clear: superconductivity at ambient conditions implies being able to handle, measure and access a single, coherent, macroscopic quantum mechanical state without the limitations associated with cryogenics and pressurization. This would not only open exciting avenues for fundamental research, but also pave the road for a wide range of technological applications, affecting strategic areas such as energy conservation and climate change. In this roadmap we have collected contributions from many of the main actors working on superconductivity, and asked them to share their personal viewpoint on the field. The hope is that this article will serve not only as an instantaneous picture of the status of research, but also as a true roadmap defining the main long-term theoretical and experimental challenges that lie ahead. Interestingly, although the current research in superconductor design is dominated by conventional (phonon-mediated) superconductors, there seems to be a widespread consensus that achieving A-SC may require different pairing mechanisms. In memoriam, to Neil Ashcroft, who inspired us all. , (Creative Commons Attribution license.)

The possibility of high, room-temperature superconductivity was predicted for metallic hydrogen in the 1960s. However, metallization and superconductivity of hydrogen are yet to be unambiguously demonstrated and may require pressures as high as 5 million atmospheres. Rare earth based "superhydrides", such as LaH 10 , can be considered as a close approximation of metallic hydrogen even though they form at moderately lower pressures. In superhydrides the predominance of H-H metallic bonds and high superconducting transition temperatures bear the hallmarks of metallic hydrogen. Still, experimental studies revealing the key factors controlling their superconductivity are scarce. Here, we report the pressure and magnetic field dependence of the superconducting order observed in LaH 10 . We determine that the high-symmetry high-temperature superconducting Fm-3m phase of LaH 10 can be stabilized at substantially lower pressures than previously thought. We find a remarkable correlation between superconductivity and a structural instability indicating that lattice vibrations, responsible for the monoclinic structural distortions in LaH 10 , strongly affect the superconducting coupling., (© 2021. The Author(s).)

The discovery of superconducting H 3 S with a critical temperature T c ∼200 K opened a door to room temperature superconductivity and stimulated further extensive studies of hydrogen-rich compounds stabilized by high pressure. Here, we report a comprehensive study of the yttrium-hydrogen system with the highest predicted T c s among binary compounds and discuss the contradictions between different theoretical calculations and experimental data. We synthesized yttrium hydrides with the compositions of YH 3 , YH 4 , YH 6 and YH 9 in a diamond anvil cell and studied their crystal structures, electrical and magnetic transport properties, and isotopic effects. We found superconductivity in the Im-3m YH 6 and P6 3 /mmc YH 9 phases with maximal T c s of ∼220 K at 183 GPa and ∼243 K at 201 GPa, respectively. Fm-3m YH 10 with the highest predicted T c  > 300 K was not observed in our experiments, and instead, YH 9 was found to be the hydrogen-richest yttrium hydride in the studied pressure and temperature range up to record 410 GPa and 2250 K., (© 2021. The Author(s).)

The discovery of superconductivity above 250 K at high pressure in LaH 10 and the prediction of overcoming the room temperature threshold for superconductivity in YH 10 urge for a better understanding of hydrogen interaction mechanisms with the heavy atom sublattice in metal hydrides under high pressure at the atomic scale. Here we use locally sensitive X-ray absorption fine structure spectroscopy (XAFS) to get insight into the nature of phase transitions and the rearrangements of local electronic and crystal structure in archetypal metal hydride YH 3 under pressure up to 180 GPa. The combination of the experimental methods allowed us to implement a multiscale length study of YH 3 : XAFS (short-range), Raman scattering (medium-range) and XRD (long-range). XANES data evidence a strong effect of hydrogen on the density of 4d yttrium states that increases with pressure and EXAFS data evidence a strong anharmonicity, manifested as yttrium atom vibrations in a double-well potential.

The discovery of superconductivity in H 3 S at 203 K marked an advance towards room-temperature superconductivity and demonstrated the potential of H-dominated compounds to possess a high critical temperature (T c ). There have been numerous reports of the H-S system over the last five years, but important questions remain unanswered. It is crucial to verify whether the T c was determined correctly for samples prepared from compressed H 2 S, since they are inevitably contaminated with H-depleted byproducts. Here, we prepare stoichiometric H 3 S by direct in situ synthesis from elemental S and excess H 2 . The Im 3 ‾ m phase of D 3 S samples exhibits a T c significantly higher than previously reported values (ca. 150 K), reaching a maximum T c of 166 K at 157 GPa. Furthermore, we confirm that the sharp decrease in T c below 150 GPa is accompanied by continuous rhombohedral structural distortions and demonstrate that the Cccm phase is non-metallic, with molecular H 2 units in the crystal structure., (© 2020 The Authors. Published by Wiley-VCH GmbH.)

The discovery of superconductivity at 260 K in hydrogen-rich compounds like LaH 10 re-invigorated the quest for room temperature superconductivity. Here, we report the temperature dependence of the upper critical fields μ 0 H c2 (T) of superconducting H 3 S under a record-high combination of applied pressures up to 160 GPa and fields up to 65 T. We find that H c2 (T) displays a linear dependence on temperature over an extended range as found in multigap or in strongly-coupled superconductors, thus deviating from conventional Werthamer, Helfand, and Hohenberg (WHH) formalism. The best fit of H c2 (T) to the WHH formalism yields negligible values for the Maki parameter α and the spin-orbit scattering constant λ SO . However, H c2 (T) is well-described by a model based on strong coupling superconductivity with a coupling constant λ ~ 2. We conclude that H 3 S behaves as a strong-coupled orbital-limited superconductor over the entire range of temperatures and fields used for our measurements.

With the discovery 1 of superconductivity at 203 kelvin in H 3 S, attention returned to conventional superconductors with properties that can be described by the Bardeen-Cooper-Schrieffer and the Migdal-Eliashberg theories. Although these theories predict the possibility of room-temperature superconductivity in metals that have certain favourable properties-such as lattice vibrations at high frequencies-they are not sufficient to guide the design or predict the properties of new superconducting materials. First-principles calculations based on density functional theory have enabled such predictions, and have suggested a new family of superconducting hydrides that possess a clathrate-like structure in which the host atom (calcium, yttrium, lanthanum) is at the centre of a cage formed by hydrogen atoms 2-4 . For LaH 10 and YH 10 , the onset of superconductivity is predicted to occur at critical temperatures between 240 and 320 kelvin at megabar pressures 3-6 . Here we report superconductivity with a critical temperature of around 250 kelvin within the [Formula: see text] structure of LaH 10 at a pressure of about 170 gigapascals. This is, to our knowledge, the highest critical temperature that has been confirmed so far in a superconducting material. Superconductivity was evidenced by the observation of zero resistance, an isotope effect, and a decrease in critical temperature under an external magnetic field, which suggested an upper critical magnetic field of about 136 tesla at zero temperature. The increase of around 50 kelvin compared with the previous highest critical temperature 1 is an encouraging step towards the goal of achieving room-temperature superconductivity in the near future.

The discovery of a superconducting phase in sulfur hydride under high pressure with a critical temperature above 200 K has provided fresh impetus to the search for superconductors at ever higher temperatures. Although this systems displays all the hallmarks of superconductivity, the mechanism through which it arises remains to be determined. Here we provide a first optical spectroscopy study of this superconductor. Experimental results for the optical reflectivity of H 3 S, under hydrostatic pressure of 150 GPa, for several temperatures and over the range 60 to 600 meV of photon energies, are compared with theoretical calculations based on Eliashberg theory. Two significant features stand out: some remarkably strong infrared active phonons at around 160 meV, and a band with a depressed reflectance in the superconducting state in the region from 450 meV to 600 meV. In this energy range H3S becomes more reflecting with increasing temperature, a change that is traced to superconductivity originating from the electron-phonon interaction. The shape, magnitude, and energy dependence of this band at 150 K agrees with our calculations. This provides strong evidence of a conventional mechanism. However, the unusually strong optical phonon suggests a contribution of electronic degrees of freedom., Competing Interests: Competing financial interests The authors declare no competing financial interests.

A superconducting critical temperature above 200 K has recently been discovered in H 2 S (or D 2 S) under high hydrostatic pressure1, 2. These measurements were interpreted in terms of a decomposition of these materials into elemental sulfur and a hydrogen-rich hydride that is responsible for the superconductivity, although direct experimental evidence for this mechanism has so far been lacking. Here we report the crystal structure of the superconducting phase of hydrogen sulfide (and deuterium sulfide) in the normal and superconducting states obtained by means of synchrotron X-ray diffraction measurements, combined with electrical resistance measurements at both room and low temperatures. We find that the superconducting phase is mostly in good agreement with theoretically predicted body-centered cubic (bcc) structure for H 3 S (Ref.3). The presence of elemental sulfur is also manifest in the X-ray diffraction patterns, thus proving the decomposition mechanism of H 2 S to H 3 S + S under pressure4-6., Competing Interests: Competing financial interests The authors declare that they have no competing financial interests.

High-temperature superconductivity remains a focus of experimental and theoretical research. Hydrogen sulfide (H2S) has been reported to be superconducting at high pressures and with a high transition temperature. We report on the direct observation of the expulsion of the magnetic field in H2S compressed to 153 gigapascals. A thin (119)Sn film placed inside the H2S sample was used as a sensor of the magnetic field. The magnetic field on the (119)Sn sensor was monitored by nuclear resonance scattering of synchrotron radiation. Our results demonstrate that an external static magnetic field of about 0.7 tesla is expelled from the volume of (119)Sn foil as a result of the shielding by the H2S sample at temperatures between 4.7 K and approximately 140 K, revealing a superconducting state of H2S., (Copyright © 2016, American Association for the Advancement of Science.)

A superconductor is a material that can conduct electricity without resistance below a superconducting transition temperature, Tc. The highest Tc that has been achieved to date is in the copper oxide system: 133 kelvin at ambient pressure and 164 kelvin at high pressures. As the nature of superconductivity in these materials is still not fully understood (they are not conventional superconductors), the prospects for achieving still higher transition temperatures by this route are not clear. In contrast, the Bardeen-Cooper-Schrieffer theory of conventional superconductivity gives a guide for achieving high Tc with no theoretical upper bound--all that is needed is a favourable combination of high-frequency phonons, strong electron-phonon coupling, and a high density of states. These conditions can in principle be fulfilled for metallic hydrogen and covalent compounds dominated by hydrogen, as hydrogen atoms provide the necessary high-frequency phonon modes as well as the strong electron-phonon coupling. Numerous calculations support this idea and have predicted transition temperatures in the range 50-235 kelvin for many hydrides, but only a moderate Tc of 17 kelvin has been observed experimentally. Here we investigate sulfur hydride, where a Tc of 80 kelvin has been predicted. We find that this system transforms to a metal at a pressure of approximately 90 gigapascals. On cooling, we see signatures of superconductivity: a sharp drop of the resistivity to zero and a decrease of the transition temperature with magnetic field, with magnetic susceptibility measurements confirming a Tc of 203 kelvin. Moreover, a pronounced isotope shift of Tc in sulfur deuteride is suggestive of an electron-phonon mechanism of superconductivity that is consistent with the Bardeen-Cooper-Schrieffer scenario. We argue that the phase responsible for high-Tc superconductivity in this system is likely to be H3S, formed from H2S by decomposition under pressure. These findings raise hope for the prospects for achieving room-temperature superconductivity in other hydrogen-based materials.

We found that nitrogen and hydrogen directly react at room temperature and pressures of ~35 GPa forming chains of single-bonded nitrogen atom with the rest of the bonds terminated with hydrogen atoms - as identified by IR absorption, Raman, X-ray diffraction experiments and theoretical calculations. At releasing pressures below ~10 GPa, the product transforms into hydrazine. Our findings might open a way for the practical synthesis of these extremely high energetic materials as the formation of nitrogen-hydrogen compounds is favorable already at pressures above 2 GPa according to the calculations.

High-pressure behavior of nitrogen trifluoride (NF3) was investigated by Raman and IR spectroscopy at pressures up to 55 GPa and room temperature, as well as by periodic calculations up to 100 GPa. Experimentally, we find three solid-solid phase transitions at 9, 18, and 39.5 GPa. Vibrational spectroscopy indicates that in all observed phases NF3 remains in the molecular form, in contrast to the behavior of compressed ammonia. This finding is confirmed by density functional theory calculations, which also indicate that the phase transitions of compressed NF3 are governed by the interplay between lone‑pair interactions and efficient molecule packing. Although nitrogen trifluoride is molecular in the whole pressure range studied, we show that it can be photodissociated by mid-IR laser radiation. This finding paves the way for the use of NF3 as an oxidizing and fluorinating agent in high-pressure reactions.

Silver iodide (AgI-V) is an archetypical ionic compound for studying the formation mechanism of a superionic state. Previous studies have proven that superionic AgI with high ionic conductivity greater than 0.1 Ω(-1)cm(-1) could only be obtained at high temperatures. We show in this paper that high pressure could also induce the superionic state in AgI even at ambient temperature. Using electrochemical impedance spectroscopy, we investigated Ag(+) ions diffusing in rock-salt structured AgI-III and KOH-type AgI-V under high pressures and directly observed the superionic state in AgI-V. The diffusion coefficient of AgI-V is ∼3.4 × 10(-4)-8.6 × 10(-4) cm(2)/s in the investigated pressure range of 12-17 GPa, comparable with those of superionic α-AgI and AgI-III'. By analyzing the half infinite length Warburg diffusion process, two parameters α and β, which closely relate to the disordered state of Ag(+) ions, have been determined and it was suggested that Ag(+) ions in AgI-V become disordered. The ionic conductivity of AgI-V is three orders of magnitude higher than that of AgI-III, and has reached around 0.1 Ω(-1)cm(-1). Evidence for all three, the diffusion coefficient, α and β, and conductivity have proven that AgI-V is a superionic conductor at ambient temperature.

Molecular hydrogen is expected to exhibit metallic properties under megabar pressures. This metal is predicted to be superconducting with a very high critical temperature, T(c), of 200-400 K, and it may acquire a new quantum state as a metallic superfluid and a superconducting superfluid. It may potentially be recovered metastably at ambient pressures. However, experiments carried out at low temperatures, T<100 K, showed that at record pressures of 300 GPa, hydrogen remains in the molecular insulating state. Here we report on the transformation of normal molecular hydrogen at room temperature (295 K) to a conductive and metallic state. At 200 GPa the Raman frequency of the molecular vibron strongly decreased and the spectral width increased, evidencing a strong interaction between molecules. Deuterium behaved similarly. Above 220 GPa, hydrogen became opaque and electrically conductive. At 260-270 GPa, hydrogen transformed into a metal as the conductance of hydrogen sharply increased and changed little on further pressurizing up to 300 GPa or cooling to at least 30 K; and the sample reflected light well. The metallic phase transformed back at 295 K into molecular hydrogen at 200 GPa. This significant hysteresis indicates that the transformation of molecular hydrogen into a metal is accompanied by a first-order structural transition presumably into a monatomic liquid state. Our findings open an avenue for detailed and comprehensive studies of metallic hydrogen.

Hydrazoic acid (HN(3))--potentially explosive, highly toxic, and very hygroscopic--is the simplest covalent azide and contains 97.7 wt % nitrogen. Although its molecular structure was established decades ago, its crystal structure has now been solved by X-ray diffraction for the first time. Molecules of HN(3) are connected to each other by hydrogen bonds in nearly planar layers parallel to (001) with stacking sequence A, B, ... The layer distance, at 2.950(1) Å, is shorter than that in 2H-graphite [3.355(2) Å]. The hydrogen bonds N-H···N are of great interest, since the azido group consists of three homonuclear atoms with identical electronegativity, but different formal charges. These hydrogen bonds are bifurcated into moderate ones with ≈2.0 Å and into weak ones with ≈2.6 Å. The moderate ones build up tetramers (HN(3))(4) in a nearly planar net of eight-membered rings. To the best of our knowledge, such a network of tetramers of a simple molecule is unique., (© 2011 American Chemical Society)

The discovery of new high-temperature superconductors based on FeAs has led to a new 'gold rush' in high-T(C) superconductivity. All of the new superconductors share the same common structural motif of FeAs layers and reach T(C) values up to 55 K (ref. 2). Recently, superconductivity has been reported in FeSe (ref. 3), which has the same iron pnictide layer structure, but without separating layers. Here, we report the magnetic and electronic phase diagram of beta-Fe(1.01)Se as a function of temperature and pressure. The superconducting transition temperature increases from 8.5 to 36.7 K under an applied pressure of 8.9 GPa. It then decreases at higher pressures. A marked change in volume is observed at the same time as T(C) rises, owing to a collapse of the separation between the Fe(2)Se(2) layers. No static magnetic ordering is observed for the whole p-T phase diagram. We also report that at higher pressures (starting around 7 GPa and completed at 38 GPa), Fe(1.01)Se transforms to a hexagonal NiAs-type structure and exhibits non-magnetic behaviour.

We studied lithium azide (LiN(3)) by x-ray diffraction and Raman spectroscopy at hydrostatic compression up to pressures above 60 GPa at room temperature. The results of x-ray diffraction analyses reveal the stability of the ambient-pressure C 2/m crystal structure up to the highest pressure. The pressure dependence of librational modes provides evidence for an order-disorder transition at low pressures (below 3 GPa), similar to the transition observed previously at low temperatures. The observed structure stability indicates that this transition is not associated with structural changes. The phase stability of LiN(3) is in contrast to that of sodium azide (which is isostructural at ambient pressure), for which a set of phase transitions has been reported at pressures below 50 GPa.

The metallization of hydrogen directly would require pressure in excess of 400 gigapascals (GPa), out of the reach of present experimental techniques. The dense group IVa hydrides attract considerable attention because hydrogen in these compounds is chemically precompressed and a metallic state is expected to be achievable at experimentally accessible pressures. We report the transformation of insulating molecular silane to a metal at 50 GPa, becoming superconducting at a transition temperature of Tc = 17 kelvin at 96 and 120 GPa. The metallic phase has a hexagonal close-packed structure with a high density of atomic hydrogen, creating a three-dimensional conducting network. These experimental findings support the idea of modeling metallic hydrogen with hydrogen-rich alloy.

Two structural transitions in covalent aluminum hydride AlH3 were characterized at high pressure. A metallic phase stable above 100 GPa is found to have a remarkably simple cubic structure with shortest first-neighbor H-H distances ever measured except in H2 molecule. Although the high-pressure phase is predicted to be superconductive, this was not observed experimentally down to 4 K over the pressure range 120-164 GPa. The results indicate that the superconducting behavior may be more complex than anticipated.

An indenter-type high-pressure cell has been developed for electric and magnetic measurements in low-temperature and high-magnetic-field environments. The maximum pressure achieved at low temperatures is more than 4.5 GPa, which is higher than that of a conventional piston-cylinder cell. The typical sample space at maximum pressure is 1.6 mm in diameter and approximately 0.7 mm in depth, and magnetic measurements such as ac-susceptibility and nuclear magnetic resonance can be performed using a miniature coil. All the components of the indenter cell are made of nonmagnetic materials that have enough thermal conductivity for low-temperature experiments using a 3He/4He dilution refrigerator. Another indenter-type cell designed for a commercial superconducting quantum interference device magnetometer is also reported.

The transformation of molecular nitrogen to a single-bonded atomic nitrogen is of significant interest from a fundamental stand point and because it is the most energetic non-nuclear material predicted. We performed an x-ray diffraction of nitrogen at pressures up to 170 GPa. At 60 GPa, we found a transition from the rhombohedral (R3c) epsilon-N(2) phase to the zeta-N(2) phase, which we identified as orthorhombic with space group P222(1) and with four molecules per unit cell. This transition is accompanied by increasing intramolecular and decreasing intermolecular distances. The major transformation of this diatomic phase into the single-bonded (polymeric) phase, recently determined to have the cubic gauche structure (cg-N), proceeds as a first-order transition with a volume change of 22%., ((c) 2004 American Institute of Physics.)

Nitrogen usually consists of molecules where two atoms are strongly triple-bonded. Here, we report on an allotropic form of nitrogen where all atoms are connected with single covalent bonds, similar to carbon atoms in diamond. The compound was synthesized directly from molecular nitrogen at temperatures above 2,000 K and pressures above 110 GPa using a laser-heated diamond cell. From X-ray and Raman scattering we have identified this as the long-sought-after polymeric nitrogen with the theoretically predicted cubic gauche structure (cg-N). This cubic phase has not been observed previously in any element. The phase is a stiff substance with bulk modulus >or=300 GPa, characteristic of strong covalent solids. The polymeric nitrogen is metastable, and contrasts with previously reported amorphous non-molecular nitrogen, which is most likely a mixture of small clusters of non-molecular phases. The cg-N represents a new class of single-bonded nitrogen materials with unique properties such as energy capacity: more than five times that of the most powerfully energetic materials.

The high-pressure behavior of nitrogen in NaN(3) was studied to 160 GPa at 120-3300 K using Raman spectroscopy, electrical conductivity, laser heating, and shear deformation methods. Nitrogen in sodium azide is in a molecularlike form; azide ions N(3-) are straight chains of three atoms linked with covalent bonds and weakly interact with each other. By application of high pressures we strongly increased interaction between ions. We found that at pressures above 19 GPa a new phase appeared, indicating a strong coupling between the azide ions. Another transformation occurs at about 50 GPa, accompanied by the appearance of new Raman peaks and a darkening of the sample. With increasing pressure, the sample becomes completely opaque above 120 GPa, and the azide molecular vibron disappears, evidencing completion of the transformation to a nonmolecular nitrogen state with amorphouslike structure which crystallizes after laser heating up to 3300 K. Laser heating and the application of shear stress accelerates the transformation and causes the transformations to occur at lower pressures. These changes can be interpreted in terms of a transformation of the azide ions to larger nitrogen clusters and then polymeric nitrogen net. The polymeric forms can be preserved on decompression in the diamond anvil cell but transform back to the starting azide and other new phases under ambient conditions., ((c) 2004 American Institute of Physics.)

Superconductivity in compressed lithium is observed by magnetic susceptibility and electrical resistivity measurements. A superconducting critical temperature (Tc) is found ranging from 9 to 16 kelvin at 23 to 80 gigapascals. The pressure dependence of Tc suggests multiple phase transitions, consistent with theoretical predictions and reported x-ray diffraction results. The observed values for Tc are much lower than those theoretically predicted, indicating that more sophisticated theoretical treatments similar to those proposed for metallic hydrogen may be required to understand superconductivity in dense phases of lithium.

Metals formed from light elements are predicted to exhibit intriguing states of electronic order. Of these materials, those containing boron are of considerable current interest because of their relatively high superconducting temperatures. We have investigated elemental boron to very high pressure using diamond anvil cell electrical conductivity techniques. We find that boron transforms from a nonmetal to a superconductor at about 160 gigapascals (GPa). The critical temperature of the transition increases from 6 kelvin (K) at 175 GPa to 11.2 K at 250 GPa, giving a positive pressure derivative of 0.05 K/GPa. Although the observed metallization pressure is compatible with the predictions of first-principles calculations, superconductivity in boron remains to be explored theoretically. The present results constitute a record pressure for both electrical conductivity studies and investigations of superconductivity in dense matter.

The triple bond of diatomic nitrogen has among the greatest binding energies of any molecule. At low temperatures and pressures, nitrogen forms a molecular crystal in which these strong bonds co-exist with weak van der Waals interactions between molecules, producing an insulator with a large band gap. As the pressure is raised on molecular crystals, intermolecular interactions increase and the molecules eventually dissociate to form monoatomic metallic solids, as was first predicted for hydrogen. Theory predicts that, in a pressure range between 50 and 94 GPa, diatomic nitrogen can be transformed into a non-molecular framework or polymeric structure with potential use as a high-energy-density material. Here we show that the non-molecular phase of nitrogen is semiconducting up to at least 240 GPa, at which pressure the energy gap has decreased to 0.4 eV. At 300 K, this transition from insulating to semiconducting behaviour starts at a pressure of approximately 140 GPa, but shifts to much higher pressure with decreasing temperature. The transition also exhibits remarkably large hysteresis with an equilibrium transition estimated to be near 100 GPa. Moreover, we have succeeded in recovering the non-molecular phase of nitrogen at ambient pressure (at temperatures below 100 K), which could be of importance for practical use.

The electrical transport properties of solid xenon were directly measured at pressures up to 155 GPa and temperatures from 300 K to 27 mK. The temperature dependence of resistance changed from semiconducting to metallic at pressures between 121 and 138 GPa, revealing direct proof of metallization of a rare-gas solid by electrical transport measurements. Anomalies in the conductivity are observed at low temperatures in the vicinity of the transition such that purely metallic behavior is observed only at 155 GPa over the entire temperature range.

Direct electrical transport measurements in a diamond anvil cell provide evidence for the metallization of cesium iodide (CsI) at a pressure of 115 gigapascals. A drop in the temperature dependence of the resistance was found at pressures above 180 gigapascals, indicating that the CsI was superconductive. The superconductivity changed under the influence of a magnetic field to a lower critical temperature and disappeared above 0.3 tesla. The highest critical temperature at which superconductivity was observed was 2 kelvin, and the critical temperature decreased with increasing pressure.