Search

One of the most common congenital anomalies of the head and neck region is a cleft lip and palate. This retrospective case-control research aimed to compare the maxillary sinus volumes in individuals with bilateral cleft lip and palate (BCLP) to a non-cleft control group. The study comprised 72 participants, including 36 patients with BCLP and 36 gender and age-matched control subjects. All topographies were obtained utilizing Cone Beam Computed Tomography (CBCT) for diagnostic purposes, and 3D Dolphin software was utilized for sinus segmentation. Volumetric measurements were taken in cubic millimeters. No significant differences were found between the sex and age distributions of both groups. Additionally, there was no statistically significant difference observed between the BCLP group and the control group on the right and left sides ( p > 0.05). However, the mean maxillary sinus volumes of BCLP patients (8014.26 ± 2841.03 mm 3 ) were significantly lower than those of the healthy control group (11,085.21 ± 3146.12 mm 3 ) ( p < 0.05). The findings of this study suggest that clinicians should be aware of the lower maxillary sinus volumes in BCLP patients when planning surgical interventions. The utilization of CBCT and sinus segmentation allowed for precise measurement of maxillary sinus volumes, contributing to the existing literature on anatomical variations in BCLP patients., Competing Interests: The authors declare no conflict of interest., (©2024 The Author(s). Published by MRE Press.)

Objective: The objectives of this study were to quantitatively measure temporomandibular joint (TMJ) disk stiffness in adolescents with bruxism using shear wave elastography (SWE) and to examine the relationship between elastography values, patient age, and duration of bruxism., Study Design: This prospective study evaluated 120 TMJ disks of 60 adolescents (30 patients with bruxism and 30 controls). The stiffness of the anterior, intermediate, and posterior parts of the disk was measured. The patient and control groups' respective quantitative SWE values of elasticity (kilopascals [kPa]) and velocity (meters/second [m/s]) were compared., Results: The elasticity and velocity values of the anterior and intermediate parts were significantly higher in the patients than in the controls (P ≤ .013), with no significant difference in the size of the joint space (P = .886). A receiver operating characteristic analysis resulted in sensitivity for the anterior part of 0.80 for kPa and 0.83 for m/s, with specificity of 0.57 (kPa) and 0.60 (m/s). For the intermediate part, the sensitivity was 0.80 for kPa and 0.86 for m/s, with specificity of 0.64 (kPa) and 0.57 (m/s). No correlations were found between the SWE values and patient age (P ≥ .098) or duration of bruxism (P ≥ .134)., Conclusions: SWE may be useful in the evaluation of TMJ disk stiffness in patients with bruxism., (Copyright © 2022 Elsevier Inc. All rights reserved.)

Objectives: To evaluate the efficiency of injectable platelet-rich fibrin (i-PRF) in accelerating canine tooth movement and to examine levels of the matrix metalloproteinase-8 (MMP-8), interleukin-1β (IL-1β), receptor activator of nuclear factor kappa-light-chain-enhancer of activated B cells ligand (RANKL), and osteoprotegerin (OPG) in the gingival crevicular fluid during orthodontic treatment., Materials and Methods: Twenty patients (mean age = 21.4 ± 2.9 years) with Class II Division 1 malocclusion were included in a split-mouth study. The treatment plan for all patients was extraction of maxillary first premolars followed by canine distalization with closed-coil springs using 150 g of force on each side. The study group received i-PRF two times, with a 2-week interval, on one side of the maxilla. The contralateral side served as the control and did not receive i-PRF. Maxillary canine tooth movement was measured at five time points (T1-T5) on each side. Also, the activity of inflammatory cytokines was evaluated at three time points in the gingival crevicular fluid samples., Results: There was a significant difference in canine tooth movement between the two groups (P < .001). i-PRF significantly increased the rate of tooth movement, and stimulation in the levels of inflammatory cytokines supported this result (P < .001). The levels of cytokines changed in both groups between T1 and T2. The IL-1β, MMP8, and RANKL values were significantly increased in the study group compared with the control group, while the OPG values were significantly decreased., Conclusions: i-PRF-facilitated orthodontics is an effective and safe treatment modality to accelerate tooth movement, and this method can help shorten orthodontic treatment duration., (© 2021 by The EH Angle Education and Research Foundation, Inc.)

Objective: To investigate the efficiency of platelet-rich fibrin (PRF) injection on maxillary incisor retraction rate., Materials and Methods: The study included 40 patients (23 women and 17 men; mean age; 20.7 ± 1.45) with Class II Division 1 malocclusion. The treatment plan for all patients was extraction of the maxillary first premolars and canine distalization, followed by retraction of the maxillary incisors. Patients were randomly divided into two groups. The study group received injectable platelet-rich fibrin (i-PRF) two times with an interval of 2 weeks; the control group did not receive i-PRF. In both groups, the measurements were bilaterally assessed as the distances between the lateral and canine teeth on the plaster models at five time points. The rate of incisor movement was evaluated by Student's t-test, analysis of variance, and Tukey honestly significant difference tests. Statistical significance was set as P < .05., Results: The average movements of incisors were significantly higher in the study group than the control group at all time points (P < .05). According to the within-group comparison, none of the measurements showed any significant differences between the right and left sides in both groups at all time points (P > .05). While the movement of incisors was significantly higher in the study group in the week following the PRF injection compared to the other weeks (P < .05), there were no significant differences in the control group at all-time points (P > .05)., Conclusions: Applying i-PRF significantly increased the rate of maxillary incisor retraction at all time intervals. Platelet-rich fibrin injection can be an effective method for shortening treatment duration., (© 2021 by The EH Angle Education and Research Foundation, Inc.)

Objective: We compared the effect of lingual-based triangular flap with buccal-based triangular flap on postoperative complications in impacted third molar surgery., Material and Methods: Thirty patients aged between 18 and 36 (mean age 19.65±2.14) were included. They all had bilateral impacted third molars. We used buccal-based triangular flap on a randomly selected side (Group 1) and lingual-based triangular flap on the other side (Group 2). We evaluated pain during 7 days after the surgery; swelling and trismus on postoperative 2., 7. and 14. days; wound dehiscence and alveolar osteitis incidence on postoperative 7. and 14. days., Results: Pain was significantly higher in Group 2 during 7 days postoperatively (P<.05). Trismus and swelling were also more prominent in Group 2 on postoperative days 2 and 7. In Group 2, the duration of the surgery in was longer than Group 1 (P<.05). In Group 1, 17 patients (56.7%) had wound dehiscence and 6 patients (20%) in Group 2 (P<.05). No alveolar osteitis developed in either groups., Conclusion: The buccal-based triangular flap seems better with regard to postoperative pain, swelling and trismus. On the other hand, the lingual-based triangular flap had a lesser incidence for wound dehiscence., (Copyright © 2019 Elsevier Masson SAS. All rights reserved.)

Objective: To evaluate pharyngeal airway and maxillary sinus volumes following symmetric rapid maxillary expansion (RME) and asymmetric rapid maxillary expansion (ARME) treatment using cone-beam computed tomography (CBCT)., Materials and Methods: The study consisted of 60 patients presenting to the orthodontics clinic with an indication that they required symmetric or asymmetric rapid maxillary expansion treatment. Individuals were included if they were aged 12-15 years and had symmetric (RME group; 14 girls, 16 boys) or asymmetric (ARME group; 16 girls, 14 boys) maxillary deficiency. Maxillary sinus volume (mm3) and pharyngeal airway volume (upper, lower, and total; mm3) were evaluated using CBCT records. The parameters were compared before treatment (T1) and after 3 months in retention (T2)., Results: All measurements at T2 were increased significantly compared with T1 in the RME group (P < .05). In the ARME group, changes in the lower pharyngeal airway and the nonaffected maxillary sinus volumes (non-affected side of maxillary sinus volumes) were not significant; however, the other measurements increased significantly from T1 to T2 (P < .05). Intergroup comparisons revealed that total pharyngeal airway volume and total maxillary sinus volume changes were significantly greater in the RME group., Conclusions: Pharyngeal airway and maxillary sinus volumes increased with both RME and ARME treatment. Both were found to be effective for treating transverse maxillary deficiency., (© 2020 by The EH Angle Education and Research Foundation, Inc.)

Objectives: To investigate the treatment efficacy and follow-up stability of the asymmetric Forsus appliance by evaluating longitudinal changes in dental arch asymmetry on digital dental models from 21 patients., Materials and Methods: Maxillary and mandibular reference lines were used for measurements of intra-arch asymmetry at pretreatment (T1), posttreatment (T2), and 4.2 years after treatment (T3). Maxillary and mandibular measurements were performed relative to the dental midline and anterior reference line on digital dental models. To determine the amount of asymmetry between the Class I and Class II sides of a given arch, all maxillary and mandibular parameters were measured on each side of the model separately. Repeated-measures analysis of variance/paired sample t -tests were performed to evaluate dental arch asymmetries at the P < .05 level., Results: The alveolar transverse dimensions of the posterior segment of both arches were increased during treatment ( P < .05) and remained stable during the retention period. Class II subdivision malocclusion was caused by distal positioning of the mandibular canine, premolars, and first molar on the Class II side ( P < .05). Asymmetry was resolved by treatment with asymmetric Forsus appliances. The resolved asymmetry remained stable over the long term. There were no significant differences between T2 and T3 ( P > .05)., Conclusions: The asymmetric Forsus appliance can be used to treat dental arch asymmetry in patients with Class II subdivision malocclusions.

Aim: In this study the authors aimed to evaluate craniofacial morphology and facial soft tissue thickness of the patients with cleft lip and palate.(CLP), and to compare the results with a sex and age-matched noncleft healthy control group., Methods: Craniofacial and soft tissue thickness measurements of 20 patients with unilateral cleft lip palate (UCLP) and 20 patients with bilateral cleft lip palate (BCLP) were compared with 20 noncleft control subjects. Angles between Sella-Nasion-A point, Sella-Nasion-B point, Nasion-A and Nasion-B line, Sella-Nasion line and Gonion-Gnation line, and linear (glabella, rhinion, subnasale, labrale superius, stomion, labrale inferius, labiomentale, pogonion, and gnathion) measurements were assessed on lateral cephalometric radiographs. Group differences were evaluated with 1-way analysis of variance and post hoc Tukey test., Results: Unilateral cleft lip palate and BCLP groups demonstrated lower values of skeletal measurements than control group except for Sella-Nasion line and Gonion-Gnation line value (P < 0.01). Maxillary incisors were retruded in BCLP group compared with the other groups (P < 0.001). Thickness of the rhinion, subnasale, and stomion demonstrated no significant difference between UCLP and BCLP groups (P > 0.05). Thickness of rhinion and stomion was found significantly higher in both groups, and thickness of the subnasale was found significantly lower than the healthy group (P < 0.05)., Conclusion: Findings of the study suggested that patients with CLP showed differences on craniofacial morphology and facial soft tissue thickness. Before planning orthodontic treatment and esthetic surgeries, soft tissue thickness should be taken into consideration in addition to skeletal measurements in CLP patients.

Background: The aim of this study was to investigate the experiences of Turkish mothers in teething period and the factors affecting teething., Methods: This study was performed by filling in questionnaire forms with a face-to-face interview technique with the mothers of 792 patients presenting to the outpatient clinics of pediatrics of Fatih (Turgut Ozal) University Faculty of Medicine between 1 April and 31 July 2012., Results: This study was conducted in a total of 792 children (mean age: 24.2±7.9, range 12-42 months; 430 males). Of the study population, 6.1% had a family history of premature teething, 9.7% had a family history of delayed teething, 98% had been breastfed, 91.9% had used vitamin D, 67.6% had used iron supplements, and 3.9% had fluorine use. The first teething was at 7.8±2.5 months and the first teeth to appear was the anterior lower incisor (58.7%). The symptoms the patients had during teething were irritability (64.9%), fever (64.1%), increased mastication (61.6%), increased salivation (58.2%), and diarrhea (45.6%). The rate of admission to a physician with these complaints was 19.6%. The factors affecting the teething time were a family history of premature or delayed teething and birth with natal tooth, and male gender., Conclusions: In this study we found that nutritional or local factors were not effective on teething time. Teething period was characterized by nonspecific symptoms including irritability, subfebrile fever, increased mastication and salivation, and diarrhea. Linear regression analysis revealed that male gender and a family history of premature teething were the factors responsible from a shortening in teething time.

An adenomatoid odontogenic tumor is an uncommon asymptomatic lesion that is often misdiagnosed as a dentigerous cyst. It originates from the odontogenic epithelium. Enucleation and curettage is the usual treatment of choice. Marsupialization may be attempted instead of extraction of the impacted tooth, since it provides an opportunity for tooth eruption. This case report is the first to report on the eruption of an impacted canine in an adenomatoid odontogenic tumor treated with combined orthodontics and marsupialization. The impacted canine erupted uneventfully, with no evidence of recurrence 3 years after the treatment., (Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

Objective: The aim of this study was to compare the effects of different pulse modes of Er:YAG laser on shear bond strength (SBS) of orthodontic brackets bonded with self-etching primers (SEP) and phosphoric acid etching., Materials and Methods: A total of 120 human mandibular third molars were randomly assigned to 3 groups of 40 specimens depending on the bonding procedure to be used. The groups were divided into two subgroups according to the pulse mode of the erbium-doped yttrium aluminum garnet (Er:YAG) laser irradiation as medium-short pulse (MSP) mode and quantum-square pulse (QSP) mode at 120 mJ, 10 Hz, 1.2 W. In each subgroup, the mesio- or distobuccal tooth surfaces were randomly assigned as experimental or control sides. After surface preparation with different modes of Er:YAG laser on experimental side, whole buccal tooth surfaces were treated with phosphoric acid etching or two different SEPs. Then metallic brackets were bonded with Transbond XT (3 M Unitek, Monrovia, CA, USA) or Kurasper F (Kuraray, Okayama, Japan). SBS values and the amount of adhesive remaining on the tooth after debonding were assessed. One-way analysis of variance (ANOVA) was used to evaluate the changes in mean SBS between groups resulting from laser etching, followed by post hoc test of Tukey., Results: There were statistically significant differences between the experimental and control sides of all groups (p < 0.05)., Conclusion: Laser etching with QSP and MSP modes increases the SBS of metallic brackets and Er:YAG laser irradiation with QSP mode increases the SBS of SEPs.

Objective: The aim of this study was to evaluate the surface roughness of enamel after debonding with various types of burs., Methods: The buccal surfaces of 20 mandibular incisors for each group of bur were subjected to profilometer analysis, and three parameters of surface irregularity were recorded. After bracket debonding, adhesive remnants were removed by tungsten carbide burs in low-speed, high-speed, and stainbuster settings. The samples were evaluated at pre-treatment (on sound enamel) (T1) and post-treatment (T2) by a profilometer. The specimens were measured twice, and the mean values were recorded., Results: The results were analyzed in intra-group comparisons with paired t-tests and in inter-group comparisons with one-way ANOVA and Tukey's HSD test. All resin removal techniques significantly increased enamel surface roughness (p<0.05). According to one-way ANOVA, there were significant differences in the effect of enamel surface roughness between all methods (p<0.05). The high-speed bur caused the maximum roughness values and the stainbuster bur caused the minimum roughness values in all the parameters (Ra, Rz, and Rq)., Conclusion: The three types of burs used for finishing methods revealed significant differences in the enamel surface after debonding. However, the stainbuster bur created smoother surfaces than the other applied methods., Competing Interests: Conflict of Interest: No conflict of interest was declared by the authors.

Background and Objectives: Some of these adult patients have ceramic crowns, to which orthodontists have concerns about bonding brackets. The aim of the present study was to evaluate the effect of a Ti:Sapphire femtosecond (fs) laser (Integra-C-3.5, Quantronix, NY) on the surface roughness of two ceramic surfaces (feldspathic and IPS Empress e-Max) and to compare results with those of two other lasers (Er:YAG and Nd:YAG) and conventional techniques, i.e., sandblasting (50 µm) and hydrofluoric (HF) acid., Materials and Methods: Ceramic discs were fabricated (n = 150) and divided into two groups, each of which was then divided into five subgroups prepared with Ti:Sapphire fs, Nd:YAG, or Er:YAG lasers, sandblasting, or HF acid (n = 15). The surface roughness of the ceramic discs was evaluated using a profilometer (Mitotoyo Surf Test SJ 201 P/M; Mitutoyo Corp, Japan) before and after each surface treatment. Three traces were recorded for each specimen at three different locations in each direction, providing nine measurements per sample, which were then averaged to obtain the surface roughness value. Data were analyzed using the Wilcoxon signed-rank test (P < <0.05), two-way ANOVA, and Tukey's HSD test (P < 0.05). Additional samples were prepared for each group and evaluated using atomic force microscopy (AFM; NTEGRA Solaris, NTMDT, Russia)., Results: No significant difference was found between the feldspathic and IPS Empress e-Max ceramics. The Ti:Sapphire fs laser was associated with the highest mean roughness value. AFM images of the ceramic surfaces treated confirmed that the fs-laser-treated surfaces had the highest degree of irregularity., Conclusion: Within the limitations of this in vitro study, the Ti:Sapphire fs laser yielded the highest surface roughness and could be an alternative ceramic surface treatment to increase bond strength., (© 2015 Wiley Periodicals, Inc.)

Background and Objectives: With increasing demand for orthodontic treatments in adults, orthodontists continue to debate the optimal way to prepare ceramic surfaces for bonding. This study evaluated the effects of a Ti:sapphire laser on the shear bond strength (SBS) of orthodontic brackets bonded to two ceramic surfaces (feldspathic and IPS Empress e-Max) and the results were compared with those using two other lasers (Er:YAG and Nd:YAG) and 'conventional' techniques, i.e., sandblasting (50 µm) and hydrofluoric (HF) acid., Materials and Methods: In total, 150 ceramic discs were prepared and divided into two groups. In each group, the following five subgroups were prepared: Ti:sapphire laser, Nd:YAG laser, Er:YAG laser, sandblasting, and HF acid. Mandibular incisor brackets were bonded using a light-cured adhesive. The samples were stored in distilled water for 24 hours at 37°C and then thermocycled. Extra samples were prepared and examined using scanning electron microscopy (SEM). SBS testing was performed and failure modes were classified. ANOVA and Tukey's HSD tests were used to compare SBS among the five subgroups (P < 0.05)., Results: Feldspathic and IPS Empress e-Max ceramics had similar SBS values. The Ti:sapphire femtosecond laser (16.76 ± 1.37 MPa) produced the highest mean bond strength, followed by sandblasting (12.79 ± 1.42 MPa) and HF acid (11.28 ± 1.26 MPa). The Er:YAG (5.43 ± 1.21 MPa) and Nd:YAG laser (5.36 ± 1.04 MPa) groups were similar and had the lowest SBS values. More homogeneous and regular surfaces were observed in the ablation pattern with the Ti:sapphire laser than with the other treatments by SEM analysis., Conclusions: Within the limitations of this in vitro study, Ti:sapphire laser- treated surfaces had the highest SBS values. Therefore, this technique may be useful for the pretreatment of ceramic surfaces as an alternative to 'conventional' techniques., (© 2015 Wiley Periodicals, Inc.)

Introduction: The aim of this study was to investigate the presence of transient bacteremia after a piezocision procedure., Methods: The sample consisted of 30 subjects (24 women, 6 men; mean age, 19.6 ± 0.7 years; range, 18.1-22.4 years) with the American Society of Anesthesiologists' physical status I. All patients had Class I skeletal and dental relationships and had fixed orthodontic treatment with the Damon system. The piezocision surgery was performed 1 week after the placement of the orthodontic appliances in all patients. Two 20-mL venous blood samples were collected before and 30 to 60 seconds after the first microincision using an aseptic technique. The samples were inoculated into BACTEC Plus aerobic and anaerobic blood culture bottles and were assessed in the BACTEC blood culture analyzer (Becton Dickinson Diagnostic Instrument Systems, Sparks, Md). The results were analyzed statistically using the McNemar test, with P <0.05 indicating statistical significance., Results: No significant difference between the preoperative and postoperative samples was determined with respect to transient bacteremia (P = 0.250). No bacteremia was detected in the pretreatment samples, although Gemella sanguinis, Streptococcus pluranimalium, and Streptococcus mitis/oralis were detected in 3 postoperative blood samples., Conclusions: The piezocision procedure might be related to transitory bacteremia. Hence, orthodontists should consider the possibility of bacterial endocarditis in at-risk patients when piezocision is part of the treatment plan., (Copyright © 2014 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)