Search

An ammonium picket porphyrin that targets bacterial membranes has been prepared and shown to bind to phosphatidylglycerol (PG), a bacterial lipid, when the lipid was in solution, contained within synthetic membrane vesicles, or when in Gram-negative and Gram-positive bacterial membranes. The multifunctional receptor was designed to interact with both the phosphate anion portion and neutral glycerol portion of the lipid headgroup. The receptor's affinity and selectivity for binding to surfactant vesicles or lipid vesicles that contain PG within their membranes was directly measured using fluorescence correlation spectroscopy (FCS). FCS demonstrated that the picket porphyrin's binding pocket was complementary for the lipid headgroup, since simple Coulombic interactions alone did not induce binding. (1)H NMR and isothermal titration calorimetry (ITC) were used to determine the receptor's binding stoichiometry, receptor-lipid complex structure, binding constant, and associated thermodynamic properties of complexation in solution. The lipid-receptor binding motif in solution was shown to mirror the binding motif of membrane-bound PG and receptor. Cell lysis assays with E. coli (Gram-negative) and Bacillus thuringiensis (Gram-positive) probed with UV/Visible spectrophotometry indicated that the receptor was able to penetrate either bacterial cell wall and to bind to the bacterial inner membrane.

Theory predicts that folding free energy landscapes are intrinsically malleable and as such are expected to respond to perturbations in topographically complex ways. Structural changes upon perturbation have been observed experimentally for unfolded ensembles, folding transition states, and fast downhill folding proteins. However, the native state of proteins that fold in a two-state fashion is conventionally assumed to be structurally invariant during unfolding. Here we investigate how the native and unfolded states of the chicken α-spectrin SH3 domain (a well characterized slow two-state folder) change in response to chemical denaturants and/or temperature. We can resolve the individual properties of the two end-states across the chemical unfolding transition employing single-molecule fluorescence spectroscopy (SM-FRET) and across the thermal unfolding transition by NMR because SH3 folds-unfolds in the slow chemical exchange regime. Our results demonstrate that α-spectrin SH3 unfolds in a canonical way in the sense that it converts between the native state and an unfolded ensemble that expands in response to chemical denaturants. However, as conditions become increasingly destabilizing, the native state also expands gradually, and a large fraction of its native intramolecular hydrogen bonds break up. This gradual disordering of the native state takes place in times shorter than the 100 μs resolution of our SM-FRET experiments. α-Spectrin SH3 thus showcases the extreme plasticity of folding landscapes, which extends to the native state of slow two-state proteins. Our results point to the idea that folding mechanisms under physiological conditions might be quite different from those obtained by linear extrapolation from denaturing conditions. Furthermore, they highlight a pressing need for re-evaluating the conventional procedures for analyzing and interpreting folding experiments, which may be based on too-simplistic assumptions.

The E. coli Lac repressor (LacI) tetramer binds simultaneously to a promoter-proximal DNA binding site (operator) and an auxiliary operator, resulting in a DNA loop, which increases repression efficiency. Induction of the lac operon by allolactose reduces the affinity of LacI for DNA, but induction does not completely prevent looping in vivo. Our previous work on the conformations of LacI loops used a hyperstable model DNA construct, 9C14, that contains a sequence directed bend flanked by operators. Single-molecule fluorescence resonance energy transfer (SM-FRET) on a dual fluorophore-labeled LacI-9C14 loop showed that it adopts a single, stable, high-FRET V-shaped LacI conformation. Ligand-induced changes in loop geometry can affect loop stability, and the current work assesses loop population distributions for LacI-9C14 complexes containing the synthetic inducer IPTG. SM-FRET confirms that the high-FRET LacI-9C14 loop is only partially destabilized by saturating IPTG. LacI titration experiments and FRET fluctuation analysis suggest that the addition of IPTG induces loop conformational dynamics and re-equilibration between loop population distributions that include a mixture of looped states that do not exhibit high-efficiency FRET. The results show that repression by looping even at saturating IPTG should be considered in models for regulation of the operon. We propose that persistent DNA loops near the operator function biologically to accelerate rerepression upon exhaustion of inducer.

A one-state downhill protein folding process is barrierless at all conditions, resulting in gradual melting of native structure that permits resolving folding mechanisms step-by-step at atomic resolution. Experimental studies of one-state downhill folding have typically focused on the thermal denaturation of proteins that fold near the speed limit (ca. 10(6) s(-1)) at their unfolding temperature, thus being several orders of magnitude too fast for current single-molecule methods, such as single-molecule FRET. An important open question is whether one-state downhill folding kinetics can be slowed down to make them accessible to single-molecule approaches without turning the protein into a conventional activated folder. Here we address this question on the small helical protein BBL, a paradigm of one-state downhill thermal (un)folding. We decreased 200-fold the BBL folding-unfolding rate by combining chemical denaturation and low temperature, and carried out free-diffusion single-molecule FRET experiments with 50-μs resolution and maximal photoprotection using a recently developed Trolox-cysteamine cocktail. These experiments revealed a single conformational ensemble at all denaturing conditions. The chemical unfolding of BBL was then manifested by the gradual change of this unique ensemble, which shifts from high to low FRET efficiency and becomes broader at increasing denaturant. Furthermore, using detailed quantitative analysis, we could rule out the possibility that the BBL single-molecule data are produced by partly overlapping folded and unfolded peaks. Thus, our results demonstrate the one-state downhill folding regime at the single-molecule level and highlight that this folding scenario is not necessarily associated with ultrafast kinetics.

In this report the correlation between the solution photoluminescence (PL) quantum yield and the fluorescence emission of individual semiconductor quantum dots (QDs) is investigated. This is done by taking advantage of previously reported enhancement in the macroscopic quantum yield of water-soluble QDs capped with dihydrolipoic acid (DHLA) when self-assembled with polyhistidine-appended proteins, and by using fluorescence coincidence analysis (FCA) to detect the presence of "bright" and "dark" single QDs in solution. This allows for changes in the fraction of the two QD species to be tracked as the PL yield of the solution is progressively altered. The results clearly indicate that in a dispersion of luminescent nanocrystals, "bright" (intermittently emitting) single QDs coexist with "permanently dark" (non-emitting) QDs. Furthermore, the increase in the fraction of emitting QDs accompanies the increase in the PL quantum yield of the solution. These findings support the idea that a dispersion of QDs consists of two optically distinct populations of nanocrystals--one is "bright" while the other is "dark;" and that the relative fraction of these two populations defines the overall PL yield., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Time resolution of current single-molecule fluorescence techniques is limited to milliseconds because of dye blinking and bleaching. Here we introduce a photoprotection strategy that affords microsecond resolution by combining efficient triplet quenching by oxygen and Trolox with minimized bleaching via the oxygen radical scavenger cysteamine. Using this approach we resolved the single-molecule microsecond conformational fluctuations of two proteins: the two-state folder α-spectrin SH3 domain and the ultrafast downhill folder BBL.

Colloidal solutions of surfactants that form micelles or vesicles are useful for solubilizing and stabilizing hydrophobic molecules that are otherwise sparingly soluble in aqueous solutions. In this paper we investigate the use of micelles and vesicles prepared from ionic surfactants for solubilizing and stabilizing curcumin, a medicinal natural product that undergoes alkaline hydrolysis in water. We identify spectroscopic signatures to evaluate curcumin partitioning and deprotonation in surfactant mixtures containing micelles or vesicles. These spectroscopic signatures allow us to monitor the interaction of curcumin with charged surfactants over a wide range of pH values. Titration data are presented to show the pH dependence of curcumin interactions with negatively and positively charged micelles and vesicles. In solutions of cationic micelles or positively charged vesicles, strong interaction between the Cur(-1) phenoxide ion and the positively charged surfactants results in a change in the acidity of the phenolic hydrogen and a lowering of the apparent lowest pK(a) value for curcumin. In the microenvironments formed by anionic micelles or negatively charged bilayers, our data indicates that curcumin partitions as the Cur(0) species, which is stabilized by interactions with the respective surfactant aggregates, and this leads to an increase in the apparent pK(a) values. Our results may explain some of the discrepancies within the literature with respect to reported pK(a) values and the acidity of the enolic versus phenolic protons. Hydrolysis rates, quantum yields, and molar absorption coefficients are reported for curcumin in a variety of solutions.

Mixtures of oppositely charged surfactants, commonly called catanionic mixtures, are one of the most interesting and promising areas of colloidal chemistry. In this paper we review our previous work and report new results on electrostatic adsorption of organic solutes and DNA to the exterior surfaces of catanionic, unilamellar vesicles which form spontaneously in mixtures of sodium dodecylbenzenesulfonate (SDBS) and cetyltrimethylammonium tosylate (CTAT). Our group, along with others, has shown that organic ions and polyelectrolytes will bind to the exterior surface of oppositely charged catanionic vesicles through interactions with unpaired ionic surfactants present in the vesicle bilayer. The electrostatic sequestration of organic ions with catanionic vesicles is extremely efficient with excellent long-term stability and can be used to perform separations on mixtures of charged organic solutes. Using regular solution theory extended to vesicle-forming surfactant mixtures, we can understand how the composition of the bilayer changes with surfactant dilution, and we study this effect using fluorescence correlation spectroscopy (FCS). We employ FCS to make sensitive measurements of bilayer adsorption and compare the adsorption of a small molecular probe with that of a single-stranded, dye-labeled DNA molecule. From these FCS studies, adsorption isotherms can be obtained that report on the relative binding strengths of the two systems. The results show that DNA binds much more strongly to the exterior surface of positively charged catanionic vesicles, and can even stabilize vesicles at very low surfactant concentrations near the critical aggregation concentration (cac).

This article reports on the synthesis, characterization, and binding studies of surface-functionalized, negatively charged catanionic vesicles. These studies demonstrate that the distribution of glycoconjugates in the membrane leaflet can be controlled by small alterations of the chemical structure of the conjugate. The ability to control the glycoconjugate concentration in the membrane provides a method to explore the relationship between ligand separation distance and multivalent lectin binding at the bilayer interface. The binding results using the O-linked glucosyl conjugate were consistent with a simple model in which binding kinetics are governed by the density of noninteracting glucose ligands, whereas the N-linked glycoconjugate exhibited binding kinetics consistent with interacting or clustering conjugates. From the noninteracting ligand model, an effective binding site separation of the sugar sites for concanavalin A of 3.6-4.3 nm was determined and a critical ligand density above which binding kinetics are zeroth order with respect to the amount of glycoconjugate present at the bilayer was observed. We also report cryo-transmission electron microscopy (cryo-TEM) images of conjugated vesicles showing morphological changes (multilayering) upon aggregation of unilamellar vesicles with concanavalin A.

Colloidal quantum dots (QDs) have a large fraction of their atoms arrayed on their surfaces and are capped with bifunctional ligands, which make their photoluminescence highly sensitive to potential charge transfer to or from the surrounding environment. In this report, we used peptides as bridges between CdSe-ZnS QDs and metal complexes to promote charge transfer between the metal complexes and QDs. We found that quenching of the QD emission is highly dependent on the relative position of the oxidation levels of QDs and metal complex used; it also traces the number of metal complexes brought in close proximity of the nanocrystal surface. In addition, partial bleaching of the absorption was measured for the QD-metal complex assemblies. These proximity driven interactions were further used to construct sensing assemblies to detect proteolytic enzyme activity.

Luminescent quantum dots (QDs) were proven to be very effective fluorescence resonance energy transfer donors with an array of organic dye acceptors, and several fluorescence resonance energy transfer based biosensing assemblies utilizing QDs have been demonstrated in the past few years. Conversely, gold nanoparticles (Au-NPs) are known for their capacity to induce strong fluorescence quenching of conventional dye donors. Using a rigid variable-length polypeptide as a bifunctional biological linker, we monitor the photoluminescence quenching of CdSe-ZnS QDs by Au-NP acceptors arrayed around the QD surface, where the center-to-center separation distance was varied over a broad range of values (approximately 50-200 Angstrom). We measure the Au-NP-induced quenching rates for such QD conjugates using steady-state and time-resolved fluorescence measurements and examine the results within the context of theoretical treatments based on the Förster dipole-dipole resonance energy transfer, dipole-metal particle energy transfer, and nanosurface energy transfer. Our results indicate that nonradiative quenching of the QD emission by proximal Au-NPs is due to long-distance dipole-metal interactions that extend significantly beyond the classical Förster range, in agreement with previous studies using organic dye-Au-NP donor-acceptor pairs.

We demonstrate the unique ability of catanionic vesicles, formed by mixing single-tailed cationic and anionic surfactants, to capture ionic solutes with remarkable efficiency. In an initial study (Wang, X.; Danoff, E. J.; Sinkov, N. A.; Lee, J.-H.; Raghavan, S. R.; English, D. S. Langmuir 2006, 22, 6461) with vesicles formed from cetyl trimethylammonium tosylate (CTAT) and sodium dodecylbenzenesulfonate (SDBS), we showed that CTAT-rich (cationic) vesicles could capture the anionic solute carboxyfluorescein with high efficiency (22%) and that the solute was retained by the vesicles for very long times (t1/2 = 84 days). Here we expand on these findings by investigating the interactions of both anionic and cationic solutes, including the chemotherapeutic agent doxorubicin, with both CTAT-rich and SDBS-rich vesicles. The ability of these vesicles to capture and hold dyes is extremely efficient (>20%) when the excess charge of the vesicle bilayer is opposite that of the solute (i.e., for anionic solutes in CTAT-rich vesicles and for cationic solutes in SDBS-rich vesicles). This charge-dependent effect is strong enough to enable the use of vesicles to selectively capture and separate an oppositely charged solute from a mixture of solutes. Our results suggest that catanionic surfactant vesicles could be useful for a variety of separation and drug delivery applications because of their unique properties and long-term stability.

Self-assembly of proteins, peptides, DNA, and other biomolecules to semiconductor quantum dots (QD) is an attractive bioconjugation route that can circumvent many of the problems associated with covalent chemistry and subsequent purification. Polyhistidine sequences have been shown to facilitate self-assembly of proteins and peptides to ZnS-overcoated CdSe QDs via complexation to unoccupied coordination metal sites on the nanocrystal surface. We describe the synthesis and characterization of a thiol-reactive hexahistidine peptidic linker that can be chemically attached to thiolated-DNA oligomers and mediate their self-assembly to CdSe-ZnS core-shell QDs. The self-assembly of hexahistidine-appended DNA to QDs is probed with gel electrophoresis and fluorescence resonance energy transfer techniques, and the results confirm high-affinity conjugate formation with control over the average molar ratio of DNA assembled per QD. To demonstrate the potential of this reactive peptide linker strategy, a prototype QD-DNA-dye molecular beacon is self-assembled and tested against both specific and nonspecific target DNAs. This conjugation route is potentially versatile, as altering the reactivity of the peptide linker may allow targeting of different functional groups such as amines and facilitate self-assembly of other nanoparticle-biomolecule structures.

Microelectronic devices employ electrons for signaling whereas the nervous system signals using ions and chemicals. Bridging these signaling differences would benefit applications that range from biosensing to neuroprosthetics. Here, we report the use of localized electrical signals to perform an operation common to chemical signaling in the nervous system. Specifically, we employ electrical signals to restrain vesicles reversibly. We perform this operation using the stimuli-responsive aminopolysaccharide chitosan that is able to electrodeposit onto cathode surfaces in response to localized electrical stimuli. We show that surfactant-vesicles and liposomes can be co-deposited with chitosan and are entrapped (i.e., restrained) within the deposited film's matrix. Vesicle co-deposition could be controlled spatially and temporally using microfabricated wafers with independent electrode addresses. Finally, we show that vesicles restrained within the deposited chitosan matrix can be mobilized under mildly acidic conditions (pH <6.5) that resolubilize chitosan. Potentially, the ability to restrain and mobilize chemical signals that are segregated within vesicles may allow microfluidic systems to access the rich diversity offered by chemical signaling.

We present a single particle fluorescence resonance energy transfer (spFRET) study of freely diffusing self-assembled quantum dot (QD) bioconjugate sensors, composed of CdSe-ZnS core-shell QD donors surrounded by dye-labeled protein acceptors. We first show that there is direct correlation between single particle and ensemble FRET measurements in terms of derived FRET efficiencies and donor-acceptor separation distances. We also find that, in addition to increased sensitivity, spFRET provides information about FRET efficiency distributions which can be used to resolve distinct sensor subpopulations. We use this capacity to gain information about the distribution in the valence of self-assembled QD-protein conjugates and show that this distribution follows Poisson statistics. We then apply spFRET to characterize heterogeneity in single sensor interactions with the substrate/target and show that such heterogeneity varies with the target concentration. The binding constant derived from spFRET is consistent with ensemble measurements.

We present fluorescence studies of quenching behavior in photoaddressable azobenzene-substituted derivatives of the fluorescent conjugated polymer poly(p-phenylenevinylene) (PPV). The azobenzene side chains partially quench the PPV fluorescence, and we have shown previously that the quenching efficiency is greater when the azobenzene side chains are cis than when they are trans. This effect provides a photoaddressable means of modulating the fluorescence intensity of PPV derivatives. To optimize the efficiency of photoinduced intensity modulation, it is important to understand the molecular nature of quenching by both trans- and cis-azobenzene side chains. Here we investigate the photophysical origins of quenching by the two isomers using steady-state and time-resolved fluorescence spectroscopy. We present results from the azobenzene-modified PPV derivative poly(2-methoxy-5-((10-(4-(phenylazo)phenoxy)decyl)oxy)-1,4-phenylenevinylene) (MPA-10-PPV) and two new related polymers, a copolymer lacking half of the azobenzene side chains and an analogue of MPA-10-PPV with a tert-butyl-substituted azobenzene. These studies reveal that steric interactions influence the extent of PPV emission quenching by trans-azobenzene but do not affect the efficient quenching by cis-azobenzene. The difference in dynamic quenching efficiencies between trans- and cis-azobenzene isomers is consistent with fluorescence resonance energy transfer. These results show that it is possible to control the efficiency of photoswitchable fluorescence modulation through specific structural variations designed to encourage or block quenching by trans-azobenzene. This is a promising approach to providing useful general guidelines for designing photomodulated PPV derivatives.

Vesicles formed from the cationic surfactant, cetyltrimethylammonium tosylate (CTAT) and the anionic surfactant, sodium dodecylbenzenesulfonate (SDBS), were used to sequester the anionic dye carboxyfluorescein. Carboxyfluorescein was efficiently sequestered in CTAT-rich vesicles via two mechanisms: encapsulation in the inner water pool and electrostatic adsorption to the charged bilayer. The apparent encapsulation efficiency (22%) includes both encapsulated and adsorbed fractions. Entrapment of carboxyfluorescein by SDBS-rich vesicles was not observed. Results show the permeability of the catanionic membrane is an order of magnitude lower than that of phosphatidylcholine vesicles and the loading capacity is more than 10 times greater.

Modifying the surfaces of magnetic nanoparticles (MNPs) by the covalent attachment of biomolecules will enable their implementation as contrast agents for magnetic resonance imaging or as media for magnetically assisted bioseparations. In this paper we report both the surface coverage and the activity of IgG antibodies on MNPs. The antibodies were immobilized on gamma-Fe2O3 nanoparticles by conventional methods using aminopropyltriethoxy silane and subsequent activation by glutaraldehyde. Novel fluorescence methods were used to provide a quantitative evaluation of this well-known approach. Our results show that surface coverage can be stoichiometrically adjusted with saturated surface coverage occurring at approximately 36% of the theoretical limit. The saturated surface coverage corresponds to 34 antibody molecules bound to an average-sized MNP (32 nm diameter). We also show that the immobilized antibodies retain approximately 50% of their binding capacity at surface-saturated levels.

The development of template-synthesized silica nanotubes has created a unique opportunity for studying confined fluids by providing nanometer-scale containers in which the inner diameter (i.d.) and surface chemistry can be systematically and independently varied. An interesting question to be answered is the following: do solvents wet nanometer-scale tubes in the same way they wet ordinary capillaries? To answer this question, we have conducted studies to explore the wettability of the hydrophobic interiors of individual nanotubes. In these studies, single nanotubes with i.d.'s of either 30 or 170 nm were investigated over a range of water/methanol mixtures. These studies provide a direct route for comparing wetting phenomena in nanotubes with conventional macroscopic theories of capillarity. Our observations reveal four important aspects of capillary wetting in the 30-170 nm regime, a size range where the application of the Young-Laplace theory has not been experimentally investigated for hydrophobic pores. They are (i) a sharp transition between wetting and nonwetting conditions induced by addition of a cosolvent, (ii) invariance of this transition between nanotubes of 30 and 170 nm pore diameter, (iii) failure of the Young-Laplace equation to accurately predict the cosolvent's (methanol) mol fraction where the transition occurs, and (iv) reversibility of the observed wetting. The first two aspects conform to conventional capillarity (Young-Laplace), but the latter two do not. These measurements were complemented with ensemble experiments. The difference between theory and experiment is likely due to reliance on macroscopic values of contact angles or to liquid-phase instability within the hydrophobic pore.

The Escherichia coli lactose repressor protein (LacI) provides a classic model for understanding protein-induced DNA looping. LacI has a C-terminal four-helix bundle tetramerization domain that may act as a flexible hinge. In previous work, several DNA constructs, each containing two lac operators bracketing a sequence-induced bend, were designed to stabilize different possible looping geometries. The resulting hyperstable LacI-DNA loops exist as both a compact "closed" form with a V-shaped repressor and also a more "open" form with an extended hinge. The "9C14" construct was of particular interest because footprinting, electrophoretic mobility shift, and ring closure experiments suggested that it forms both geometries. Previous fluorescence resonance energy transfer (FRET) measurements gave an efficiency of energy transfer (ET) of 70%, confirming the existence of a closed form. These measurements could not determine whether open form or intermediate geometries are populated or the timescale of interconversion. We have now applied single-molecule FRET to Cy3, Cy5 double-labeled LacI-DNA loops diffusing freely in solution. By using multiple excitation wavelengths and by carefully examining the behavior of the zero-ET peak during titration with LacI, we show that the LacI-9C14 loop exists exclusively in a single closed form exhibiting essentially 100% ET.

Nanoscale particles offer a variety of interesting properties, and there is growing interest in their assembly into higher ordered structures. We report that the pH-responsive aminopolysaccharide chitosan can mediate the electrodeposition of model nanoparticles. Chitosan is known to electrodeposit at the cathode surface in response to a high localized pH. To demonstrate that chitosan can mediate nanoparticle deposition, we suspended fluorescently labeled latex nanoparticles (100 nm diameter spheres) in a chitosan solution (1%) and performed electrodeposition (0.05 mA/cm2 for several minutes). Results demonstrate that chitosan is required for nanoparticle electrodeposition; chitosan confers spatial selectivity to electrodeposition; and nanoparticles distribute throughout the electrodeposited chitosan film. Additionally, we observed that the deposited films reversibly swell upon rehydration. This work indicates that chitosan provides a simple means to assemble nanoparticles at addressable locations and provides further evidence that stimuli-responsive biological materials may facilitate fabrication at the microscale.

In biological systems, organic molecules exert a remarkable level of control over the nucleation and mineral phase of inorganic materials such as calcium carbonate and silica, and over the assembly of crystallites and other nanoscale building blocks into complex structures required for biological function. This ability to direct the assembly of nanoscale components into controlled and sophisticated structures has motivated intense efforts to develop assembly methods that mimic or exploit the recognition capabilities and interactions found in biological systems. Of particular value would be methods that could be applied to materials with interesting electronic or optical properties, but natural evolution has not selected for interactions between biomolecules and such materials. However, peptides with limited selectivity for binding to metal surfaces and metal oxide surfaces have been successfully selected. Here we extend this approach and show that combinatorial phage-display libraries can be used to evolve peptides that bind to a range of semiconductor surfaces with high specificity, depending on the crystallographic orientation and composition of the structurally similar materials we have used. As electronic devices contain structurally related materials in close proximity, such peptides may find use for the controlled placement and assembly of a variety of practically important materials, thus broadening the scope for 'bottom-up' fabrication approaches.

The photodynamic drug, hypericin, is studied in fetal rat neurons using fluorescence microscopy. Hypericin has an extremely high affinity for the cell membrane and is found to a smaller extent in the nucleus. Fluorescent excitation of hypericin is shown to cause irreversible damage to the cell membranes of living neurons. Fixed cells were used to make ultrafast time-resolved measurements to avoid the deleterious effects of long-term exposure to intense light and room temperatures. To our knowledge, these are the first ultrafast time-resolved measurements of the fluorescence lifetime of hypericin in a subcellular environment. Nonexponential fluorescence decay is observed in hypericin in the neurons. This nonexponential decay is discussed in terms of other examples where nonexponential decay is induced in hypericin upon its binding to biomolecules. The nonradiative processes giving rise to the nonexponential hypericin decay are attributed to excited-state electron transfer, excited-state proton transfer or both.

The light-induced antiviral activity of hypericin and hypocrellin in the presence and absence of oxygen was examined under experimental conditions where the effect of oxygen depletion could be quantified. There was a significant reduction of light-induced antiviral activity of hypericin and hypocrellin under hypoxic conditions. Interestingly, antiviral activity of hypocrellin was not observed at low oxygen levels at which hypericin retained measurable virucidal activity. This suggests that additional pathways, such as the generation of protons from excited states of hypericin, may enhance the biological activity of activated oxygen species.

Cellulose acetate electrophoresis of Chironomus utahensis hemolymph demonstrated a six-band pattern for hemoglobins. Three major and three minor bands made up the electropherogram. Slight variations from this general pattern were found in less than 10 percent of the population and may represent ontogenetic changes, genetic variation or slight changes in the electrophoretic conditions. No variations could be correlated with the age of the culture, sex, or site of collection. Cytogenetic observations of the salivary glands revealed three large and one small pair of independent polytene chromosomes. Comparisons of electrophoretic patterns of hemoglobins and chromosome banding patterns with other chironomid species will help to clarify their taxonomic and evolutionary relationships.

The number of hemoglobins found in individual mature larvae of several Chironomus species is six to nine. The consistency of this number and of the electrophoretic mobilities of these separable forms seems to indicate the synchronous production of polypeptide chains by several genetic loci.