Search

Abstract Objective Acute acromioclavicular (AC) joint dislocation is a common orthopedic injury that can significantly impair shoulder function and reduce quality of life. Effective treatment methods are essential to restore function and alleviate pain. To investigate the short-term clinical efficacy of the minimally invasive closed-loop double endobutton fixation assisted by orthopaedic surgery robot positioning system (TiRobot) in the treatment of AC joint dislocation, and to evaluate its feasibility and safety. Methods The clinical data of 19 patients with AC joint dislocation who underwent treatment with closed-loop double Endobutton fixation assisted by TiRobot between May 2020 and December 2022 were retrospectively analyzed. Visual Analog Scale (VAS) pain scores, the Constant Murley Score (CMS), and shoulder abduction range of motion were assessed and compared preoperatively and at the last follow-up. Computed tomography (CT) parameters of the acromioclavicular joint, including acromioclavicular distance (ACD), the distance between the upper and lower Endobutton (DED), the horizontal distance between the anterior edge of the distal clavicle and the anterior edge of the acromion (DACC), the diameter of the clavicular tunnel (DCT), and coracoid tunnel diameter (DC), were compared at 2 days, and 1 month after surgery, as well as at the last follow-up, along with the evaluation of intraoperative and postoperative complications. Results The postoperative VAS, CMS, and shoulder-abduction range of motion were significantly improved compared with the preoperative (all, P0.05). Comparisons of DCT and DC revealed statistically significant differences between the last follow-up and 1 month after surgery (P0.05). There were no complications such as infection or vascular or neurological damage, no cases of rostral or clavicle fractures, loss of reduction, heterotopic ossification, shoulder stiffness, and no loosening or breaking of internal fixations. Conclusion Closed-loop double endobutton internal fixation assisted by TiRobot is an ideal method for the treatment of acute acromioclavicular (AC) joint dislocation. This method has the advantages of relatively simple operation, more accurate localization of bone tunnel during operation, less surgical trauma, and good recovery of shoulder function.

Objective: Acute acromioclavicular (AC) joint dislocation is a common orthopedic injury that can significantly impair shoulder function and reduce quality of life. Effective treatment methods are essential to restore function and alleviate pain. To investigate the short-term clinical efficacy of the minimally invasive closed-loop double endobutton fixation assisted by orthopaedic surgery robot positioning system (TiRobot) in the treatment of AC joint dislocation, and to evaluate its feasibility and safety. Methods: The clinical data of 19 patients with AC joint dislocation who underwent treatment with closed-loop double Endobutton fixation assisted by TiRobot between May 2020 and December 2022 were retrospectively analyzed. Visual Analog Scale (VAS) pain scores, the Constant Murley Score (CMS), and shoulder abduction range of motion were assessed and compared preoperatively and at the last follow-up. Computed tomography (CT) parameters of the acromioclavicular joint, including acromioclavicular distance (ACD), the distance between the upper and lower Endobutton (DED), the horizontal distance between the anterior edge of the distal clavicle and the anterior edge of the acromion (DACC), the diameter of the clavicular tunnel (DCT), and coracoid tunnel diameter (DC), were compared at 2 days, and 1 month after surgery, as well as at the last follow-up, along with the evaluation of intraoperative and postoperative complications. Results: The postoperative VAS, CMS, and shoulder-abduction range of motion were significantly improved compared with the preoperative (all, P<0.05). The statistical analysis showed no significant difference in the CT image parameters of the acromioclavicular joint at 2 days and 1 month after surgery(all, P>0.05). Comparisons of DCT and DC revealed statistically significant differences between the last follow-up and 1 month after surgery (P<0.05), and no statistically significant difference was found in ACD, DED, and DACC(all, P>0.05). There were no complications such as infection or vascular or neurological damage, no cases of rostral or clavicle fractures, loss of reduction, heterotopic ossification, shoulder stiffness, and no loosening or breaking of internal fixations. Conclusion: Closed-loop double endobutton internal fixation assisted by TiRobot is an ideal method for the treatment of acute acromioclavicular (AC) joint dislocation. This method has the advantages of relatively simple operation, more accurate localization of bone tunnel during operation, less surgical trauma, and good recovery of shoulder function. [ABSTRACT FROM AUTHOR]

Objective Endobutton technique could provide flexible coracoclavicular (CC) stabilization for acromioclavicular joint (ACJ) dislocation and achieved good clinical outcomes. However, the difficult part of this technique was placement of the Endobutton to the coracoid base. In this study, we designed an Endobutton installation device to place the Endobutton at the coracoid base. And we examined the clinical and radiographic outcomes of patients with acute Rockwood type III ACJ dislocation repaired with Endobutton using this device. Methods We designed an Endobutton installation device to place the Endobutton at the coracoid base to achieve CC stabilization. We retrospectively reviewed 42 patients with acute Rockwood type III ACJ dislocation who underwent CC stabilization with Endobuttons placed either using this novel device (group I, n = 19) or the traditional technique (CC stabilization without using special device, group II, n = 23) from January 2015 to April 2020. The two groups were compared regarding the operative time, intraoperative blood loss, and clinical and radiologic outcomes at final follow‐up. The operation‐related complications were also evaluated. The Student's t test and the Mann–Whitney U‐test were used to compare differences in continuous variables. Differences in categorical variables were assessed with either the Pearson's chi‐squared test or Fisher's exact test. Results Forty‐two patients were clinically followed up for a minimum of 12 months. Compared with group II, group I had a significantly shorter mean operative time (56.05 ± 7.82 min vs. 65.87 ± 7.43 min, p

Objective: Endobutton technique could provide flexible coracoclavicular (CC) stabilization for acromioclavicular joint (ACJ) dislocation and achieved good clinical outcomes. However, the difficult part of this technique was placement of the Endobutton to the coracoid base. In this study, we designed an Endobutton installation device to place the Endobutton at the coracoid base. And we examined the clinical and radiographic outcomes of patients with acute Rockwood type III ACJ dislocation repaired with Endobutton using this device. Methods: We designed an Endobutton installation device to place the Endobutton at the coracoid base to achieve CC stabilization. We retrospectively reviewed 42 patients with acute Rockwood type III ACJ dislocation who underwent CC stabilization with Endobuttons placed either using this novel device (group I, n = 19) or the traditional technique (CC stabilization without using special device, group II, n = 23) from January 2015 to April 2020. The two groups were compared regarding the operative time, intraoperative blood loss, and clinical and radiologic outcomes at final follow‐up. The operation‐related complications were also evaluated. The Student's t test and the Mann–Whitney U‐test were used to compare differences in continuous variables. Differences in categorical variables were assessed with either the Pearson's chi‐squared test or Fisher's exact test. Results: Forty‐two patients were clinically followed up for a minimum of 12 months. Compared with group II, group I had a significantly shorter mean operative time (56.05 ± 7.82 min vs. 65.87 ± 7.43 min, p < 0.01) and significantly lesser mean intraoperative blood loss (67.89 ± 14.75 mL vs. 94.78 ± 25.01 mL, p < 0.01). At final follow‐up, there were no significant differences between the two groups in the visual analog scale score for pain, Oxford Shoulder Score, Disabilities of the Arm, Shoulder, and Hand score, and postoperative CC distance of the affected side. Loss of reduction occurred in four patients in group I and three patients in group II (p = 0.68); there were no other operation‐related complications in either group. Conclusions: The Endobutton installation device makes placement of the Endobutton at the coracoid base easier and achieves satisfactory clinical and radiologic outcomes without additional complications in acute Rockwood type III ACJ dislocation. [ABSTRACT FROM AUTHOR]

The Latarjet procedure is widely used to address anterior shoulder instability, especially in case of glenoid bone loss. Recently, cortical suture button fixation for coracoid transfer has been used to mitigate complications seen with screw placement. The aim of this biomechanical study was to evaluate the stability of a novel and cost-effective cow-hitch suture button technique, designed to be performed through a standard open deltopectoral approach, and compare this to a well-established double suture button technique. We randomly assigned 12 fresh frozen cadaveric shoulders to undergo the Latarjet procedure with either 4 suture button (S&N EndoButton) fixations (SB group; n = 6, age 72 ± 9.8 years) or cow-hitch suture button technique using a 1.7-mm FiberTape looped sequentially in 2 suture buttons (Arthrex Pectoralis Button) placed from anterior on the posterior glenoid (CH-SB group; n = 6, age 73 ± 9.3 years). After fixation, all shoulders underwent biomechanical testing with direct loading on the graft via a material testing system. Cyclic loading was performed for 100 cycles (10-100 N) to determine axial displacement with time; each graft was then monotonically loaded to failure. The maximum cyclic displacement was 4.3 ± 1.6 mm for the cow-hitch suture button technique and 5.0 ± 1.7 mm for the standard double suture button technique (P =.46). Ultimate load to failure and stiffness were, respectively, 190 ± 82 N and 221 ± 124 N/mm for the CH-SB technique and 172 ± 48 N and 173 ± 34 N/mm for the standard double SB technique (P =.66 and.43). The most common failure mode was suture cut-through at the anteroinferior aspect of the glenoid for both fixation groups. The cow-hitch suture button technique resulted in a similar elongation, stiffness, and failure load compared to an established double suture button technique. Therefore, this cost-effective fixation may be an alternative, eligible for open approaches, to the established double suture button techniques. [ABSTRACT FROM AUTHOR]

Background: The anterior cruciate ligament (ACL) is the primary stabilizer of the knee and prevents the knee against anterior translation. It is also important in counteracting rotational and valgus stress. The arthroscopically aided approach has the advantages of smaller skin and capsular incisions, improved viewing of the intercondylar notch for placement of the tunnel and attachment sites, less postoperative pain, fewer adhesions, earlier motion, and easier rehabilitation. The advantages with semitendinosus grafts are the availability of a greater sectional area and the unaffected integrity of the extensor mechanism. Moreover, the tensile strength of quadrupled hamstring is found to be even better than a normal ACL. The rate of complications such as extension loss, anterior knee pain, and surgical site infections was also lower than in other procedures such as in BPTB grafts. Cortical suspension devices have the necessary biomechanical properties with regard to ultimate failure strength, displacement, and stiffness for the initial fixation of soft tissue in the femoral tunnel for ACL reconstruction. The aperture fixation methods such as the interference screws allow for early firm fixation and heal with a tight bone–tendon interface. Objective: A prospective study to evaluate the functional and clinical outcome of ACL reconstruction with standard hamstring autograft. Materials and Methods: The study results included 30 patients admitted with clinical and radiological deficiency of ACL from September 2019 to March 2021 using endobutton and bioabsorbable interference screw in terms of range of motion, postoperative knee stability, subjective knee functions, and prospective assessment of functional outcome using Tegner Lysholm knee scoring system. Results: Sports injuries were the most common mode of injury (n = 17, 56.7%). The mean size of graft used was 8.2 ± 0.39 mm. Postoperatively at 2-year follow-up, 30 cases (100%) had 0 grade pivot-shift test, 0 grade Lachman test, and anterior drawer test. The mean postoperative Lysholm score improved from preoperative score of 62.83 ± 5.2–91.0 ± 5.54. The overall satisfactory result (excellent + good) at 6-month follow-up was (excellent – 30 and good – 70) 100%. Out of this, 27 (90%) patients had returned to preinjury level of activity in 1 year. In this study, one patient had superficial infection and two patients had knee pain. Conclusion: Arthroscopy-assisted ACL reconstruction using hamstring tendon autograft provides a stable knee, reduces postoperative morbidity, and enables early rehabilitation.

Background: Despite technical advancement, elbow ulnar collateral ligament (UCL) reconstruction is a challenging procedure due to the limitations regarding the challenging tunnel placement and potential injury to the ulnar nerve. Furthermore, current techniques for reconstruction and repair are inferior functionally and biomechanically when compared to native UCL tissue. A modified docking technique using a single-tunnel proximal suspensory fixation may reduce complications and potentially provide a technique for UCL reconstruction that is biomechanically superior. Decreasing the number of bone tunnels decreases the number of places that bone tear through could occur. The purpose was to evaluate and compare the biomechanical performances for 2 elbow UCL reconstruction techniques: (1) standard docking technique (SD) and (2) a proximal single tunnel (PST) technique using a suspensory fixation. We hypothesized that the PST technique would be biomechanically superior to the SD technique. Methods: Twelve matched pairs of cadaveric elbows were dissected and fixed at 70 degrees for biomechanical testing. Gracilis grafts were used for a docking reconstruction and the modified reconstruction with a PST suspensory fixation. A cyclic valgus torque protocol was used to precondition specimens for either reconstruction technique and the ulnohumeral gapping was then assessed. Following gapping measurements, postsurgical specimens underwent a valgus rotation applied at a rate of 5°/s until the anterior band of the UCL failed or fracture occurred. Ultimate load to failure, stiffness, and mode of failure were recorded. Results: There were no statistical differences between the two groups. Mean rotational stiffness of the SD (2.3 ± 0.6 Nm/deg) compared to the PST (1.9 ± 0.7 Nm/deg) (P = .41) and mean ultimate failure torque of the SD (30.5 ± 9.2 Nm) compared to the PST (30.9 ± 8.6 Nm) (P = .86) were similar. There was also no statistically significant difference (P = .83) when comparing the native UCL ulnohumeral gapping (6.0 ± 2.0 mm) to the mean ulnohumeral gapping of the SD reconstruction (6.0 ± 1.8 mm). Conclusions: This study compares the biomechanical strength of elbow UCL reconstructions performed using the SP technique to that of a PST technique. Among all tested parameters, including ultimate failure torque, stiffness, and ulnohumeral gapping, there were no statistically significant differences between the 2 techniques.

Injuries of the long head of the biceps (LHB) tendon are a prevalent source of anterior shoulder pain and are commonly treated with tenodesis. Not only a stable fixation of the LHB but also anatomic restoration of the length-tension relationship plays a central role in providing satisfactory functional and cosmetic outcomes, especially in young patients. We report the clinical outcomes of 2 different subpectoral tenodesis techniques using unicortical button fixation. Patients aged ≤ 50 years who were treated between April 2015 and January 2020 with 1 of the 2 following subpectoral tenodesis techniques were retrospectively selected and enrolled to undergo a follow-up examination at least 2 years after surgery: subpectoral in situ tenodesis followed by resection of the intra-articular portion leaving a residual tendon stump in the bicipital groove (group I) vs. tenotomy followed by resection of the stump and subpectoral tenodesis (group II). Patients who underwent concomitant rotator cuff repair, subsequent shoulder surgery, or contralateral biceps surgery were excluded. Clinical outcomes were evaluated using the LHB score and the Constant-Murley Score (CMS), as well as measurements of isometric elbow flexion and forearm supination strength. Sonographic evaluation included assessment of the integrity of the LHB and tenodesis, examination for signs of inflammation within the sulcus or around the tendon, and measurements of the distalization of the myotendinous junction of the LHB compared with the nonoperative side. A total of 34 patients comprising group I (24 men; mean age at time of surgery, 40.3 years; mean follow-up period, 57.2 months) and 24 patients comprising group II (19 men; mean age at time of surgery, 39.8 years; mean follow-up period, 51.9 months) were evaluated. The total CMS, as well as the scores for each CMS subcategory, did not reveal significant differences between the groups. The overall LHB score was on average 10 points higher in group I (mean, 94 points) than in group II (mean, 84 points) (P =.016). Regarding the LHB score subcategories, group I showed significantly better results for patient-dependent cosmesis (mean, 15 points in group I vs. 12 points in group II; P =.005) and examiner-dependent cosmesis (mean, 14 points in group I vs. 10 points in group II; P =.001). This finding was substantiated by a significantly higher distalization of the myotendinous junction in group II (mean, 3.0 cm in group I vs. 3.8 cm in group II; P =.030). This study shows that subpectoral in situ tenodesis of the LHB followed by arthroscopic resection of the intra-articular portion provides higher LHB scores and better cosmetic outcomes compared with proximal intra-articular tenotomy followed by subpectoral tenodesis. [ABSTRACT FROM AUTHOR]

Objectives A posterior cruciate ligament (PCL) avulsion fracture of the tibial attachment site is a specific type of PCL injury that is difficult and unpleasant to manage. The objective of this study is to report the preliminary results of a newly developed technique: arthroscopic endobutton‐suture fixation using a single tibial tunnel. Methods From January 2016 to January 2018, 120 patients with PCL avulsion fracture who met our criteria were recruited. Sixty cases were treated by arthroscopic direct anterior‐to‐posterior suture suspension fixation (endobutton‐suture group), and 60 cases were treated by arthroscopic screw‐suture fixation (screw‐suture group). All radiographic studies were recorded. The curative effect was evaluated by the range of motion (ROM), KT‐2000, International Knee Documentation Committee (IKDC) scores, Tegner activity scale, and Lysholm scoring system. For statistical analysis the Student t‐test was used. Results The average follow‐up duration was 24 months. Findings and difficulties in surgery are the following. The lax anterior cruciate ligament is one of the diagnostic criteria. The anatomic location of PCL avulsion fractures is deep and surrounded by nerves and vessels; thus, operating through this region is difficult. After each tunnel drilling, the debris at the edge of opening needs to be cleaned to avoid obscuring the operator's vision or wearing the sutures. In endobutton‐suture group, ROM improved from 0° preoperatively to 140.0° ± 5.6° at the last follow‐up (P

The arthroscopic Latarjet procedure is a technically challenging technique that provides well-known results. The first series reported fixation with screws. An alternative fixation technique has been proposed, using a button, to improve the reproducibility and to decrease the complications due to screws. The first reports using this fixation technique have yielded comparable rates of fusion. The objective of this study was to assess the fusion rate and bone modifications with this type of fixation. Two hundred sixteen patients were included in this prospective study. An arthroscopic Latarjet procedure, fixed with 1 button according to the Smith & Nephew technique, was performed by a single surgeon for the treatment of anterior instability. The radiographic protocol consisted of computed tomography scans at 3, 12, and 24 weeks postoperatively. We measured the coronal and sagittal positions of the bone block, distance between the bone block and the glenoid, diameter of the glenoid tunnel, fusion rate, and time to fusion. The position was deemed flush in 92.6% of cases in the coronal plane and under the equator in 87.5% of cases in the sagittal plane. At last follow-up, we observed 9 cases of nonunion (4%), as well as 18 cases of delayed fusion. The fusion rate was 92% at 3 months and 96% at 6 months. For bone blocks that ultimately healed, the diameter of the glenoid tunnel was <2 mm in 62% of cases at 3 weeks and <1 mm in 90% of cases at 3 months. Conversely, the diameter of this tunnel significantly increased and was >3 mm in all cases of delayed union or nonunion. The described technique achieved a reliable position of the bone block and a very good fusion rate with a new type of fixation. The time to obtain fusion can be lengthy, occurring between the third and sixth months. The diameter of the glenoid tunnel was the best predictive factor for fusion. Widening of the glenoid tunnel diameter >3 mm during the first 3 weeks was the most predictive factor for delayed union or nonunion of the bone block. This finding is probably explained by a sliding effect of the sutures through this tunnel, comparable to the bungee effect in anterior cruciate ligament repair in the knee. [ABSTRACT FROM AUTHOR]

BackgroundTo reduce the costs and financial burden in the ACLR treatment, we compare the early clinical outcomes and Magnetic Resonance Imaging (MRI) results of Delta Medical's PEEK (polyether ether ketone) interference screw and EndoButton with those of Smith & Nephew's PEEK interference screw and EndoButton in patients with arthroscopic anterior cruciate ligament reconstruction.MethodsA total of 104 patients in five different medical centers were randomly allocated into two groups: 1: Delta Medical's PEEK interference screw and EndoButton (53 patients); 2: Smith & Nephew's PEEK interference screw and EndoButton (51 patients). The modified Lysholm knee score, the laxity examination, and clinical and functional range of motion were evaluated at 3 and 6 months postoperatively. The clinical effective rate was calculated and classified as excellent and good at 6 months postoperatively. MRI examinations were performed at 3 and 6 months postoperatively to determine the healing process. Computerized tomography (CT) was performed at 2 weeks and 3 months postoperatively to evaluate the complications.ResultsSignificant improvements in knee function and functional scores were observed in both groups after surgery regardless of the fixation materials applied (P < 0.05). No differences were observed in the functional scores and range of motion. The assessments of Lysholm knee scores at 3 and 6 months produced no statistical differences (both P > 0.05). The clinical effective rate revealed no difference between the groups at 6 months postoperatively (non-inferiority analysis P = 0.0220). The differences of laxity examination between the groups were not statistically significant (Fisher's test, P = 0.6139, 0.2004, respectively). No significant differences in the functional range of motion were found at each follow-up time-point (P > 0.05). No major intra- or postoperative complications, such as infection, and vessel or nerve injury were observed.ConclusionsKnee function and functional scores were improved after ACLR in both groups, regardless of the PEEK interference screw and EndoButton applied. The difference in functional scores and range of motion were not significant in groups 1 and 2. Delta Medical's PEEK interference screw and EndoButton had a non-inferiority effect compared to Smith & Nephew's PEEK interference screw and EndoButton. Delta Medical's PEEK interference screw and EndoButton were suitable for arthroscopic ACLR.

Objectives: A posterior cruciate ligament (PCL) avulsion fracture of the tibial attachment site is a specific type of PCL injury that is difficult and unpleasant to manage. The objective of this study is to report the preliminary results of a newly developed technique: arthroscopic endobutton‐suture fixation using a single tibial tunnel. Methods: From January 2016 to January 2018, 120 patients with PCL avulsion fracture who met our criteria were recruited. Sixty cases were treated by arthroscopic direct anterior‐to‐posterior suture suspension fixation (endobutton‐suture group), and 60 cases were treated by arthroscopic screw‐suture fixation (screw‐suture group). All radiographic studies were recorded. The curative effect was evaluated by the range of motion (ROM), KT‐2000, International Knee Documentation Committee (IKDC) scores, Tegner activity scale, and Lysholm scoring system. For statistical analysis the Student t‐test was used. Results: The average follow‐up duration was 24 months. Findings and difficulties in surgery are the following. The lax anterior cruciate ligament is one of the diagnostic criteria. The anatomic location of PCL avulsion fractures is deep and surrounded by nerves and vessels; thus, operating through this region is difficult. After each tunnel drilling, the debris at the edge of opening needs to be cleaned to avoid obscuring the operator's vision or wearing the sutures. In endobutton‐suture group, ROM improved from 0° preoperatively to 140.0° ± 5.6° at the last follow‐up (P < 0.001). The postoperative KT‐2000 arthrometric data at 90 N were available for all patients. The IKDC score was 23.6 ± 2.6 and 91.4 ± 4.1 pre‐ and postoperatively, respectively. The Tegner score improved from 1.2 ± 0.6 to 7.3 ± 2.3 (p < 0.001). The median Lysholm knee score increased from 40.4 ± 5.2 preoperatively to 90.1 ± 10.1 postoperatively (p < 0.001). The operative time was shorter in the endobutton‐suture group (p < 0.001). The Lysholm knee score in the endobutton‐suture group was lower than that in the endobutton‐suture group (3.1 ± 1.2 vs. 4.2 ± 1.8, p < 0.01). No significant complications were noted in the study. Conclusions: The arthroscopic direct anterior‐to‐posterior suture suspension fixation is a simple and reliable method that not only provides better clinical outcomes, but also fixes avulsion fragments of any size. [ABSTRACT FROM AUTHOR]

Purpose: The aim of this study was to describe the results of an arthroscopic Trillat procedure utilized to treat patients with symptomatic antero-inferior shoulder instability associated with hyperlaxity.Methods: A retrospective review was performed on 19 consecutive shoulders (17 patients, 2 bilateral) who underwent a Trillat procedure combined with anterio-inferior capsulolabral plasty from 2016 to 2019. Patients included in the study presented with shoulder instability combined with shoulder hyperlaxity and no glenoid or humeral bone loss. Clinical assessment included range of motion, apprehension, and instability tests. Outcome measures Constant-Murley score (CMS) scale, Walch-Duplay, ROWE, Subjective Shoulder Value (SSV), Visual Analogue Scale (VAS). Post-operatively, healing of the coracoid osteoclasy was evaluated by CT scan.Results: The mean follow-up was 24.8 months (range, 12-51). Post-operatively, none of the patients experienced a recurrent dislocation or subluxation and the anterior apprehension test was negative in all shoulders. Post-operative motion deficits of 22.1° ± 15.8 [p < 0.05] and 12.4° ± 10.1 [p < 0.05] loss were documented for ER1 and ER2, respectively. All functional scores exhibited significant improvements. Post-operative CT scan was available in 16 shoulders and revealed coracoid union in 15/16 shoulders and an asymptomatic fibrous non-union without coracoid or implant migration in one patient.Conclusion: The arthroscopic Trillat procedure combined with an antero-inferior capsulolabral plasty is effective in preventing recurrent instability and eliminating shoulder apprehension among patients suffering from anterior and or inferior hyperlaxity.Level Of Evidence: Level IV. [ABSTRACT FROM AUTHOR]

Copyright of Turkish Journal of Trauma & Emergency Surgery / Ulusal Travma ve Acil Cerrahi Dergisi is the property of KARE Publishing and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Background: Little is known about the preferred repair technique of partial tears of the distal biceps tendon. In this study, suture anchors were compared with the Endobutton technique for repair of partial distal biceps tendon ruptures, especially regarding failure rate. Methods: A total of 59 patients with 62 partial distal biceps ruptures underwent surgical treatment between 2008 and 2019. Repair of the partially ruptured distal biceps tendon was performed using suture anchors (n = 21) or an Endobutton (n = 41). Postoperative evaluation consisted of integrity and physical examination of the distal biceps tendon, range of motion, stability, neurologic status, and radiographs in AP view and lateral direction of the elbow. Results: At a median follow-up of 14 (1-82) months in all patients, a total of 5 patients had a rerupture of the reconstructed distal biceps tendon (8.1%). A significant higher rerupture rate was seen in the suture anchor group (n = 4) than in the Endobutton group (n = 1) (P = .04). The other outcome measures were similar between groups. Other than rerupture rate, there were complications in 21 patients (34%). The major symptomatic complication was attributed to lateral antebrachial cutaneous nerve neuropraxia (n = 8, 15%). Heterotopic ossifications were seen in 12 patients (34%), and ossifications were symptomatic in 4 of these patients (33%). Conclusion: A significantly higher failure rate was seen after repair of a partial distal biceps rupture using suture anchors than by using an Endobutton technique. Overall, both techniques were accompanied with complications, in particular, lateral antebrachial cutaneous nerve neuropraxia neuropraxia and the formation of heterotopic ossifications, though clinically less relevant than a rerupture.

Objective: The efficacy of the tight-rope (TR) technique and clavicular hook plate (CHP) for the treatment of acute acromioclavicular (AC) joint dislocation is controversial. This meta-analysis aimed to evaluate which method is more appropriate for the treatment of acute AC joint dislocation. Methods: We systematically searched the PubMed, EMBASE, Scopus, ISI Web of Science, Chinese VIP Database, and Chinese Wan-Fang databases from inception to January 2018 using the search term “acromioclavicular joint dislocation AND hook plate.” All prospective and retrospective controlled trials that had compared functional scores, pain scores, reduction loss rates, coracoclavicular (CC) distances, and complications between TR and CHP for acute AC joint dislocation were identified. A total of 13 of 587 studies with 732 patients were included. TR was preferential to CHP for AC joint dislocation given its higher Constant–Murley score, lower Visual Analog Scale pain score, and comparable reduction loss rate and CC distance. Subgroup analyses of the surgical type of TR did not affect the outcome. Results: The TR technique appears to be associated with better functional recovery and less pain than CHP. In addition, it does not increase the risk of reduction loss, CC distance, or operation time. It is also not associated with other complications except the implant migration, and does not require removal of the internal fixation. Conclusions: Thus, our results indicated that for AC joint dislocation, the TR technique may be preferential.

Purpose: The recommendations for surgical fixation of tibiofibular syndesmosis injuries are increasingly challenging for many clinical orthopedists, as international consensus has not been published for the optimal treatment of the injury. Thus, we have created a 3D-printed navigation template for a precise bone tunnel and a novel adjustable EndoButton fixation (NAE) for the ideal treatment. The purpose of this research was to evaluate the accuracy of the 3D-printed navigation template and explore the biomechanical performance of the NAE technique by comparing it with the intact syndesmosis, screw technique, and TightRope (TR) technique.Methods: Twenty-four human cadaveric legs were randomly allocated to four groups: the NAE group (n = 6), TR group (n = 6), screw group (n = 6), and intact group (n = 6). A personalized navigation template based on computed tomography scans was designed, and 3D printing models were generated for the distal tibiofibular syndesmosis. The NAE, TR, and screw group were performed via 3D-printed navigation template, respectively. All groups were tested under increasing loading forces including axial loading (from 100 N to 700 N) and torsional loading (from 1 N to 5 N), which were performed in different ankle positions. The displacements of the tibiofibular syndesmosis were analyzed using the Bose Electroforce 3510-AT biomechanical testing equipment.Results: Surgical fixations were conducted successfully through a 3D-printed navigation template. Both in axial or torsional loading experiments, no statistically significant difference was observed in the displacements among the NAE, TR, and intact groups in most situations (p > 0.05), whereas the screw group demonstrated obviously smaller displacements than the abovementioned three groups (p < 0.05).Conclusion: The 3D printing technology application may become beneficial and favorable for locating and making the bone tunnel. Also, the NAE fixation provides the performance of complete ligaments; it also restores physiologic micromotion and avoids insufficient or excessive reduction when compared to the TR and screw technique. This may offer a new fixation for the treatment of tibiofibular syndesmosis injuries that is desirable for clinical promotion.

The anterior cruciate ligament (ACL) of the knee joint is one of the strongest ligaments of the body and is often the target of traumatic injuries. Unfortunately, its healing potential is limited, and the surgical options for its replacement are frequently associated with clinical issues. A bioengineered ACL (bACL) was developed using a collagen matrix, seeded with autologous cells and successfully grafted and integrated into goat knee joints. We hypothesize that, in order to reduce the cost and simplify the model, an acellular bACL can be used as a substitute for a torn ACL, and bone plugs can be replaced by endobuttons to fix the bACL in situ. First, acellular bACLs were successfully grafted in the goat model with 18% recovery of ultimate tensile strength 6 months after implantation (94 N/mm² vs. 520). Second, a bACL with endobuttons was produced and tested in an exvivo bovine knee model. The natural collagen scaffold of the bACL contributes to supporting host cell migration, growth and differentiation in situ post-implantation. Bone plugs were replaced by endobuttons to design a second generation of bACLs that offer more versatility as biocompatible grafts for torn ACL replacement in humans. A robust collagen bACL will allow solving therapeutic issues currently encountered by orthopedic surgeons such as donor-site morbidity, graft failure and post-traumatic osteoarthritis. [ABSTRACT FROM AUTHOR]

Abstract Background The aim is to describe a new arthroscopically assisted Latarjet technique. Methods We evaluated the clinical and radiological findings of 60 patients with chronic recurrent anterior gleno-humeral instability who underwent, between September 2013 and November 2014, an arthroscopically-assisted Latarjet procedure with double round endobutton fixation. Inclusion criteria were: chronic anterior recurrent instability, Instability Severity Index Score (ISIS) greater than three points, a glenoid bone defect > 15% or a Hill Sachs lesion with concomitant glenoid bone defect > 10%. During surgery the joint capsule and the anterior glenoid labrum were detached. Two drill tunnels perpendicular to the neck of the glenoid were made through a guide. An accessible pilot hole through the glenoid was created to allows the passage of guidewires for coracoid guidance and final fixation onto the anterior glenoid. Through a restricted deltopectoral access a coracoid osteotomy was made. Finally, the graft was prepared, inserted and secured using half-stitches. Results The mean follow-up was 32.5 months (range 24–32 months). At a mean follow-up, 56 of the 60 subjects claimed a stable shoulder without postoperative complaints, two (3.3%) had an anterior dislocation after new traumatic injury, and two (3.3%) complained of subjective instability. At the latest follow-up, four subjects complained of painful recurrent anterior instability during abduction-external rotation with apprehension. At 1 year, the graft had migrated in one patient (1.7%) and judged not healed and high positioned in another patient (1.7%). Moreover, a glenoid bony gain of 26.3% was recorded. At the latest follow-up, three patients had grade 1 according to Samilson and Prieto classification asymptomatic degenerative changes. Nerve injuries and infections were not detected. None of the 60 patients underwent revision surgery. Healing rate of the graft was 96.7%. Conclusions This technique of arthroscopically assisted Latarjet combines mini-open and arthroscopic approach for improving the precision of the bony tunnels in the glenoid and coracoid placement, minimizing any potential risk of neurologic complications. It can be an option in subjects with anterior gleno-humeral instability and glenoid bone defect. Further studies should be performed to confirm our preliminary results. Trial registration Trial registration number 61/int/2017 Name of registry: ORS Date of registration 11.5.2017 Date of enrolment of the first participant to the trial: September 2013 ‘retrospectively registered’ Level of evidence IV

Abstract Background The aim of this study was to investigate the effect of reduction loss of more than 3 mm on clinical and radiological results after at least 2 years of follow-up after arthroscopic fixation of acute acromioclavicular joint dislocations using a double-button device. Methods Thirty-six patients who had acute (< 3 weeks old), type III or V acromioclavicular (AC) joint dislocations underwent arthroscopic fixation of the AC joint using a double-button device. Clinical and radiological evaluations were performed at preoperative, postoperative first day, 3 months and last follow-up. When the coracoclavicular (CC) distances of patients at the last follow-up were compared to the early postop CC distances, those with a difference of 3 mm or less were grouped as group A and those with a difference of more than 3 mm were grouped as group B. Results There was no statistically significant difference between the groups in terms of age, gender, follow-up time, time from injury to surgery, return to work, and distribution of Rockwood classification. Pre-operative CC distance was reduced from 18.7 ± 3.5 to 8.5 ± 0.6 in the early postoperative period. Anatomic reduction was achieved in all patients compared with the unaffected side (CC distance 8.6 ± 0.7). However, the CC distance increased to 9.9 ± 1.5 at the third-month follow-up and increased to 11 ± 2.7 at the last follow-up. There were no significant Constant score differences between the groups in the preoperative and last follow-up periods (p > 0.05). At the last follow-up, the mean Acromioclavicular Joint Instability (ACJI) score of group A was 84.4 ± 8, whereas it was 68.3 ± 8.3 for group B, and the difference was statistically significant (p < 0.01). Furthermore, the subjective evaluation and aesthetic subjective satisfaction values of group B were lower than group A (p < 0.01). Conclusions Reduction loss of more than 3 mm was observed in 25% of patients after arthroscopic fixation of acute acromioclavicular dislocations using a double-button device. Although this loss did not create a statistically significant difference in Constant scores, AC joint-specific tests such as ACJI, subjective evaluation, and aesthetic subjective satisfaction values were significantly impaired.

Lateral femoral wall perforation is a rare intra-operative complication in anterior cruciate ligament (ACL) reconstruction surgery. However, it can be challenging to manage if it occurs. We share our experience on lateral femoral wall perforation managed by a large fragment washer. A 25-year-old man with right ACL injury presented with knee instability despite physiotherapy. Anterior drawer test (ADT) and Lachman test were grade 3, glide on pivot shift was positive. During ACL reconstruction, the lateral femoral wall was perforated. Due to unavailability of the rescue endobutton and budget constraint, we passed the endobutton through a washer and allowed it to sit on the washer over the lateral femoral wall. ADT and Lachman test on post-operative 6, 12 and 24 weeks were grade 1, with a negative pivot shift test. Lysholm knee score improved from 69 pre-operatively to 98 post-operatively. Conventionally, lateral femoral wall perforation can be managed by rescue endobutton, or screw and washer post technique. As this complication is rare, the rescue endobutton may not be available at all times, and the cost of the implant is also another important factor to consider. A washer can be used as an alternative technique to manage lateral femoral wall perforation in ACL reconstruction as it is not only costeffective but also provides stable fixation with good functional outcome.

Abstract Background Considering the epidemiology of acromioclavicular (AC) dislocation related to young and active patients, the impact on working capacity is highly relevant. The purpose of this study was to determine the capacity of work and time to return to work (RTW) after AC joint stabilization. We hypothesized that manual working patients show more restrictions returning to work. Methods In this retrospective case series, pre- and posttraumatic working capacity of 54 patients (FU-rate 80.1%, FU time 23, range 18–45 month) stabilized in single TightRope technique was analyzed. Clinical outcome (DASH, Constant-Murley score) and complications were evaluated in addition. Results Fifty one of 54 patients (94.5%) were returned to work at final follow-up. The median time to return was 13 (5–143) weeks. Manual working patients showed lower RTW-rates (91.2% vs. 100%; p = .151), longer RTW-time (15.5 vs. 6 weeks; p = .008), and more often persistent shoulder symptoms at work (55.9% vs. 5%; p

Background: Avulsion fracture of the coracoclavicular ligament accompanied by upward displacement of the medial fragment of the clavicle represents a unique fracture pattern, first described by Latarjet and colleagues in 1975. Due to the function of the underlying articulations and the ligaments found in the area, this fracture pattern results in a combination of horizontal and vertical instability that must be taken into consideration when treating. Several surgical techniques have been proposed but none has been proven superior. Case summary: Herein, we present a Latarjet fracture of the distal clavicle treated with a single endobutton. A 45-year-old male underwent open surgical stabilization of distal clavicular fracture 15 days after trauma. After stabilization of the fracture, we applied a single endobutton, passing through the medial fragment, inferior fragment and coracoid process. The patient was observed for 14 mo postoperative, during which time he achieved union in all three fragments of the fracture and an excellent functional clinical score. Conclusion: In Latarjet fracture treatment, augmentation of the coracoclavicular ligament is the most important parameter for a favorable result.

Background/Aim: High-grade acromioclavicular joint injuries are usually treated surgically. However, there is still no consensus on which technique should be performed. We investigated the short-term clinical and radiological outcomes of the patients treated with the TightRope technique. Methods: In this retrospective cohort study, 15 patients (13 males and 2 females) who had an acromioclavicular joint injury and were treated with the TightRope technique between October 2015 and May 2019 were evaluated. The patients who had Rockwood type III (1 patient), type IV (8 patients), and type V (6 patients) injuries and had been followed up for at least 1 year were included in the study. At the final visits, the patients were evaluated functionally with VAS, DASH, and Constant scores, as well as radiologically by measuring the coracoclavicular distance on bilateral shoulder AP X-rays. Results: The mean duration of follow-up was 25.2 (5.6) months. Mean time to surgery was 3.0 (2.2) days and mean time to return to work was 8.8 (1.7) weeks. The coracoclavicular distance was 11.6 (2.1) mm on the affected side and 10.2 (0.8) mm in the other shoulder. Mean VAS, DASH, and Constant scores at the final visit were 1, 10, and 92, respectively. Conclusion: Use of the TightRope technique for the treatment of acromioclavicular dislocations might be effective like other methods that contribute to early regaining of range of motion of the shoulder joint, in addition to reduction of the dislocation. [ABSTRACT FROM AUTHOR]

Objective: The efficacy of the tight-rope (TR) technique and clavicular hook plate (CHP) for the treatment of acute acromioclavicular (AC) joint dislocation is controversial. This meta-analysis aimed to evaluate which method is more appropriate for the treatment of acute AC joint dislocation. Methods: We systematically searched the PubMed, EMBASE, Scopus, ISI Web of Science, Chinese VIP Database, and Chinese Wan-Fang databases from inception to January 2018 using the search term "acromioclavicular joint dislocation AND hook plate." All prospective and retrospective controlled trials that had compared functional scores, pain scores, reduction loss rates, coracoclavicular (CC) distances, and complications between TR and CHP for acute AC joint dislocation were identified. A total of 13 of 587 studies with 732 patients were included. TR was preferential to CHP for AC joint dislocation given its higher Constant–Murley score, lower Visual Analog Scale pain score, and comparable reduction loss rate and CC distance. Subgroup analyses of the surgical type of TR did not affect the outcome. Results: The TR technique appears to be associated with better functional recovery and less pain than CHP. In addition, it does not increase the risk of reduction loss, CC distance, or operation time. It is also not associated with other complications except the implant migration, and does not require removal of the internal fixation. Conclusions: Thus, our results indicated that for AC joint dislocation, the TR technique may be preferential. [ABSTRACT FROM AUTHOR]

Background Anterior cruciate ligament reconstruction (ACLR) is a common operative procedure and many options regarding the type of the selected graft and fixation technique have been described to date. Although many studies have addressed the issue of the optimal femoral fixation device during ACLR with a hamstring tendon (HT) autograft, no clear evidence to indicate one technique over another has been found. Objective The purpose of this study was to compare the long-term postoperative outcomes and complication rates between transfemoral Cross-pin (CP) and Endobutton-Cortical Button (CB) fixation techniques in patients undergoing ACLR with an HT autograft. Methods One hundred and seven consecutive patients underwent ACLR by using a quadruple HT autograft that was stabilized with either a CP (CP Group: 52 patients) or a CB (CB Group: 55 patients) fixation technique. The Lachman test (LT), the Pivot-shift test (PST), the side-to-side difference in anterior translation of the tibia, the International Knee Documentation Committee (IKDC), and the Lysholm knee scoring systems were evaluated before surgery and during long-term follow up. The femoral and tibial tunnel diameter was measured in the anteroposterior (AP) and lateral radiographs after surgery and at the final follow-up. A review of the literature was also carried out to identify any differences between both techniques. Results Study groups were comparable in terms of patient demographics. The mean follow-up was 10.4 ± 1.3 and 10.6 ± 1.3 years in the CP and CB Groups, respectively (p = 0.47). In the CP Group, improvements after surgery in LT and PST from grade 2 (n=34) or 3 (n=18) to grade 0 (n = 41) or 1 (n = 11) and from grade 2 (n=36) or 3 (n = 16) to grade 0 (n = 44) or 1 (n = 8), respectively, were observed. In the CB Group, similar improvements in LT and PST scores from grade 2 (n = 40) or 3 (n = 15) to grade 0 (n = 46) or 1 (n = 9) and from grade 2 (n = 41) or 3 (n = 14) to grade 0 (n = 47) or 1 (n = 8), respectively, were observed. However, no differences between the groups (p = 0.53 for LT and p = 0.90 for PST) were noted. The mean Lysholm scores were 89.7 ± 6.8 and 90.2 ± 7.2 in the CP and CB groups, respectively (p = 0.59). Side-to-side difference improved from 9.1 ± 2.8 to 1.7 ± 1.5 mm and from 8.6 ± 2.5 to 1.6 ± 1.4 mm in the CP and CB groups, respectively (p = 0.89 between groups). According to IKDC grades, 92.1% and 91.4% of knees in the CP and CB groups, respectively were reported to be Grade A (Normal) or B (Nearly Normal) with a p = 0.7. Femoral and tibial tunnel widening was found in the last follow-up in both groups. However, there was no difference in the degree of tunnel widening among the two techniques. With respect to LT, PST, anterior drawer test, and IKDC score, none of the 15 published comparative studies demonstrated any significant differences between the two techniques and only one study detected a difference regarding the Lysholm score in favor of CP fixation. Conclusion In the long term, both CB and CP femoral stabilization techniques were shown to be associated with similar functional outcomes and low complication rates. Further large multicenter random clinical trials are still required to identify the most effective method of femoral fixation for HT autograft during ACLR surgery., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2024, Chalidis et al.)

Background An anterior cruciate ligament (ACL) tear is one of the most common sports injuries in the knee region. Currently, anatomical ACL reconstruction with quadrupled hamstring tendon autograft and controlled accelerated rehabilitation is a frequently used treatment approach. This study aims to add to the literature the early and mid-term clinical results of the controlled accelerated rehabilitation program we implemented in our clinic to enable patients to return to their daily activities faster after ACL reconstruction. Methodology In this retrospective study, 51 patients (50 males, 1 female) diagnosed with ACL tear and undergoing ACL reconstruction with quadrupled hamstring tendon graft were included in our study. In the femoral fixation of the graft, the transfix method was used in 22 patients and the Endobutton-CL method was used in 29 patients. A controlled accelerated rehabilitation program developed by Shelbourne was employed with some modifications to the patients. Clinical evaluation of patients was performed using Lysholm, Cincinnati, Tegner, and International Knee Documentation Committee (IKDC) scoring systems. Results The mean postoperative follow-up period was 18.7 months (range = 6-36 months). During the physical examination, Lachman, anterior drawer, and pivot shift, 49 (96%) patients achieved excellent or good results, while only two (5%) patients experienced fair clinical outcomes. On clinical assessment using the Lysholm and IKDC scoring systems, 50 (98%) patients demonstrated excellent or good results, whereas only one (2%) patient showed fair results. Excellent and good outcomes were observed in all patients using the Cincinnati scoring system. We found a significant decrease in Tegner activity score pre-surgery, which significantly increased post-surgery. Conclusions The combination of Endobutton and cross-pin for femoral fixation and staples and interference screw for tibial fixation is thought to be safe in patients undergoing controlled accelerated rehabilitation after ACL reconstruction. The implementation of controlled accelerated rehabilitation enables patients to return to their social lives earlier without resulting in clinically poor outcomes in grafts and implants applied in the early and middle stages., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2024, Ozdamar et al.)

Introduction: A prospective case series study to analyze the outcome of arthroscopic fixation of posterior cruciate ligament (PCL) avulsion fracture using a single tibial tunnel and suture loop with button configuration technique. PCL avulsion fracture injury requires surgical treatment to restore PCL function and stability of the knee joint. Several open and arthroscopic procedures require a steep learning curve are followed to treat these injuries; yet, our technique is a simpler technique with desirable outcomes and does not require a long learning curve. Hence, it is reported., Case Series: Ten patients with the same ethnic background having avulsed PCL injury since 2015 underwent arthroscopic fixation of avulsed PCL with single tibial tunnel and suture loop with button configuration within 3 months of injury are studied prospectively till date. All patients are clinically and radiologically evaluated with varied parameters. Postoperatively structured rehabilitation protocol is followed for all the patients. Post-operative clinical and radiological assessments are done and analyzed in 6 weeks, 3 months, 6 months, 1 year, 2 years, and 3 years., Discussion: Ten patients were available for follow-up for a period of 6 months-3 years. Outcome analysis at the end of 3 years for all patients showed definitive improvement in the function of the knee statistically and functionally., Conclusion: For patients with PCL avulsion fracture, arthroscopic fixation of PCL with a single tibial tunnel and suture loop with Endobutton configuration gives definitive results. Medium-term follow-up analysis shows no failure in the outcome., Competing Interests: Conflict of Interest: Nil, (Copyright: © Indian Orthopaedic Research Group.)

Objective: To investigate the effectiveness of arthroscopic suspension fixation with Endobutton in the treatment of tibial insertion avulsion fractures of posterior cruciate ligament (PCL)., Methods: A retrospective analysis was conducted on the clinical data of 52 patients (52 knees) with tibial insertion avulsion fractures of PCL, who were treated by arthroscopic suspension fixation with Endobutton between June 2017 and October 2022. There were 29 males and 23 females, with an average age of 40.6 years (range, 19-66 years). There were 24 cases of traffic accident injuries, 17 cases of sports injuries, and 11 cases of fall injuries. The time from injury to operation ranged from 6 to 19 days (mean, 13.3 days). According to the Meyers-McKeever classification, there were 30 cases of type Ⅱ and 22 cases of type Ⅲ fractures. All patients exhibited positive posterior drawer test results. Preoperative knee joint function was assessed with Lysholm score (21.3±6.7), International Knee Documentation Committee (IKDC) score (20.7±5.8), and visual analogue scale (VAS) score (5.3±0.7); and knee joint range of motion was (41.73±3.17)°. Based on preoperative CT three-dimensional reconstruction measurements, the longitudinal diameter of the avulsed bone fragment ranged from 13 to 25 mm (mean, 18.1 mm). Operation time and occurrence of complications were recorded, and postoperative imaging was used to assess fracture healing. Knee joint function and pain severity were evaluated using knee joint range of motion, Lysholm score, IKDC score, and VAS score., Results: The operation time ranged from 46 to 81 minutes (mean, 56.2 minutes). All patients were followed up 12-28 months (mean, 20.1 months). The iatrogenic fractures of bone fragments occurred during operation in 4 cases; and knee effusion occurred in 2 cases and anterior knee pain in 1 case after operation. All incisions healed by first intention. Imaging evaluations at 3 months after operation showed the fracture healing and no internal fixation failure. All patients demonstrated good knee function and had returned to normal activities at 12 months after operation. At last follow-up, the knee joint range of motion was (133.44±4.17)°, Lysholm score 93.6±3.1, IKDC score 93.4±2.5, and VAS score 1.0±0.6, with significant differences compared to preoperative scores ( P <0.05)., Conclusion: Arthroscopic suspension fixation with Endobutton in the treatment of tibial insertion avulsion fractures of PCL is simple to operate, and the knee joint function recovers well.

Since the recognition of MPFL as the primary soft-tissue restraint to lateral displacement of the patella, its reconstruction gained popularity either alone or in combination with other procedures. Today, although there are plenty of techniques described in the literature, there is no consensus regarding which one is better. MPFL reconstruction using an endobutton device has been proved to be a reliable option with satisfying clinical results. Single or dual tunnel can be done depending on surgeon's preference. For safer outcomes more randomized controlled trials should be done while authors should be more meticulous when it comes to surgical technique., Competing Interests: The authors declare no conflict of interest

The anterior cruciate ligament (ACL) of the knee joint is one of the strongest ligaments of the body and is often the target of traumatic injuries. Unfortunately, its healing potential is limited, and the surgical options for its replacement are frequently associated with clinical issues. A bioengineered ACL (bACL) was developed using a collagen matrix, seeded with autologous cells and successfully grafted and integrated into goat knee joints. We hypothesize that, in order to reduce the cost and simplify the model, an acellular bACL can be used as a substitute for a torn ACL, and bone plugs can be replaced by endobuttons to fix the bACL in situ. First, acellular bACLs were successfully grafted in the goat model with 18% recovery of ultimate tensile strength 6 months after implantation (94 N/mm2 vs. 520). Second, a bACL with endobuttons was produced and tested in an exvivo bovine knee model. The natural collagen scaffold of the bACL contributes to supporting host cell migration, growth and differentiation in situ post-implantation. Bone plugs were replaced by endobuttons to design a second generation of bACLs that offer more versatility as biocompatible grafts for torn ACL replacement in humans. A robust collagen bACL will allow solving therapeutic issues currently encountered by orthopedic surgeons such as donor-site morbidity, graft failure and post-traumatic osteoarthritis.

Distal biceps tendon avulsions account for 3%-10% of all biceps ruptures. Treated nonoperatively, these injuries lead to a loss of endurance, supination strength, and flexion strength compared with operative repair or reconstruction. Operative management of chronic injury has classically been with graft tissue to augment the contracted muscle. We present our results for chronic distal biceps avulsions secured with suture button through a single transverse incision in high flexion without the need for allograft augmentation. This was a retrospective review of 20 patients with 21 injuries who underwent primary surgical repair of chronic distal biceps tendon avulsions at an average of 10 weeks (range 4-42 weeks). All patients were treated with a single transverse incision with a suture button armed with nonabsorbable no. 2 core sutures. Postoperatively patients were found to have 50°-90° flexion contracture. All patients were placed in a simple sling postoperatively with gentle extension to gravity as tolerated immediately and no formal physical therapy. Patients were surveyed regarding pre- and postoperative American Shoulder and Elbow Surgeons Standardized Shoulder Assessment Form (ASES) score, visual analog scale (VAS) score, Mayo Elbow Performance Score (MEPS), Oxford Elbow Score (OES), and overall satisfaction. Range of motion (ROM), flexion, and supination strength compared to the contralateral uninjured extremity were evaluated at final follow-up. Mean clinical follow-up was 26 months. All patients regained full ROM and 5/5 flexion and supination strength at final follow-up. MEPSs were 100 for all responding patients compared with an average 47.5 preoperatively (P <.0001). The mean postoperative ASES score was 97.2 compared with 41.9 preoperatively (P <.0001). Mean OESs pre- and postoperatively were 24.2 and 48, respectively (P <.0001). The mean VAS score was 4.4 preoperatively and was reported as 0 by all patients at final follow-up (P <.0001). Two patients had transient sensory radial nerve neuropathy, and 1 patient has persistent palsy. No synostoses occurred. Four patients reported supination fatigue postoperatively compared with the uninjured extremity. Given these results, we feel that chronic distal biceps tendon ruptures can be repaired successfully with a single incision using suture button technique without the use of a graft. Though the flexion contracture is significant postoperatively, all patients regained full ROM and had excellent postoperative functional outcome scores. [ABSTRACT FROM AUTHOR]

Objective: Distal biceps brachii tendon (DBBT) rupture is an uncommon but functionally significant injury given the loss of supination, flexion strength and pain that often result. Prompt surgical repair is preferred in most patients. Clinicoradiological post-operative follow-up is typically performed to assess DBBT repair integrity and function, frequently using ultrasound, though to date, no studies have described post-operative DBBT repair sonographic appearances. The purpose of this study was to evaluate post-operative DBBT sonographic appearances in the context of Endobutton repair with the following aims:i.Establish typical ultrasound appearances 12 months post-surgeryii.Establish the relationship between ultrasound appearances and clinical/functional outcomes.Materials and Methods: Sixty patients between February 2016 and October 2017 undergoing DBBT repair were prospectively recruited, all undergoing clinical and sonographic assessment 12 months post-surgery. Ultrasound data was collected on tendon integrity, tendon calibre and presence of intratendinous calcification, peritendinous fluid and peritendinous soft tissue/scarring. Clinical data was collected on active range of motion (ROM) (flexion, extension, supination, pronation) and strength (flexion and supination).Results: A total of 57/60 patients had intact DBBT repairs identified sonographically and clinically at 12 months. DBBT repairs had significantly increased cross-sectional area (mean 260%, 95% CI: 217%, 303%) compared with non-operated DBBT. Ninety-three percent of DBBT repairs were hypoechoic. Thirty percent contained intratendinous calcification. Peritendinous fluid/soft tissue was rarely observed. There was no significant correlation between DBBT calibre and strength/ROM parameters.Conclusion: Normal post-operative sonographic appearances of Endobutton DBBT repair comprise a hypoechoic tendon significantly increased in calibre compared with non-operated tendon ± intratendinous calcification. DBBT repair calibre varies greatly, but is not associated with any significant difference in strength/ROM. [ABSTRACT FROM AUTHOR]

Background: The aim is to describe a new arthroscopically assisted Latarjet technique.Methods: We evaluated the clinical and radiological findings of 60 patients with chronic recurrent anterior gleno-humeral instability who underwent, between September 2013 and November 2014, an arthroscopically-assisted Latarjet procedure with double round endobutton fixation. Inclusion criteria were: chronic anterior recurrent instability, Instability Severity Index Score (ISIS) greater than three points, a glenoid bone defect > 15% or a Hill Sachs lesion with concomitant glenoid bone defect > 10%. During surgery the joint capsule and the anterior glenoid labrum were detached. Two drill tunnels perpendicular to the neck of the glenoid were made through a guide. An accessible pilot hole through the glenoid was created to allows the passage of guidewires for coracoid guidance and final fixation onto the anterior glenoid. Through a restricted deltopectoral access a coracoid osteotomy was made. Finally, the graft was prepared, inserted and secured using half-stitches.Results: The mean follow-up was 32.5 months (range 24-32 months). At a mean follow-up, 56 of the 60 subjects claimed a stable shoulder without postoperative complaints, two (3.3%) had an anterior dislocation after new traumatic injury, and two (3.3%) complained of subjective instability. At the latest follow-up, four subjects complained of painful recurrent anterior instability during abduction-external rotation with apprehension. At 1 year, the graft had migrated in one patient (1.7%) and judged not healed and high positioned in another patient (1.7%). Moreover, a glenoid bony gain of 26.3% was recorded. At the latest follow-up, three patients had grade 1 according to Samilson and Prieto classification asymptomatic degenerative changes. Nerve injuries and infections were not detected. None of the 60 patients underwent revision surgery. Healing rate of the graft was 96.7%.Conclusions: This technique of arthroscopically assisted Latarjet combines mini-open and arthroscopic approach for improving the precision of the bony tunnels in the glenoid and coracoid placement, minimizing any potential risk of neurologic complications. It can be an option in subjects with anterior gleno-humeral instability and glenoid bone defect. Further studies should be performed to confirm our preliminary results.Trial Registration: Trial registration number 61/int/2017 Name of registry: ORS Date of registration 11.5.2017 Date of enrolment of the first participant to the trial: September 2013 'retrospectively registered' LEVEL OF EVIDENCE: IV. [ABSTRACT FROM AUTHOR]

Background: The aim of this study was to investigate the effect of reduction loss of more than 3 mm on clinical and radiological results after at least 2 years of follow-up after arthroscopic fixation of acute acromioclavicular joint dislocations using a double-button device. Methods: Thirty-six patients who had acute (< 3 weeks old), type III or V acromioclavicular (AC) joint dislocations underwent arthroscopic fixation of the AC joint using a double-button device. Clinical and radiological evaluations were performed at preoperative, postoperative first day, 3 months and last follow-up. When the coracoclavicular (CC) distances of patients at the last follow-up were compared to the early postop CC distances, those with a difference of 3 mm or less were grouped as group A and those with a difference of more than 3 mm were grouped as group B. Results: There was no statistically significant difference between the groups in terms of age, gender, follow-up time, time from injury to surgery, return to work, and distribution of Rockwood classification. Pre-operative CC distance was reduced from 18.7 ± 3.5 to 8.5 ± 0.6 in the early postoperative period. Anatomic reduction was achieved in all patients compared with the unaffected side (CC distance 8.6 ± 0.7). However, the CC distance increased to 9.9 ± 1.5 at the third-month follow-up and increased to 11 ± 2.7 at the last follow-up. There were no significant Constant score differences between the groups in the preoperative and last follow-up periods (p > 0.05). At the last follow-up, the mean Acromioclavicular Joint Instability (ACJI) score of group A was 84.4 ± 8, whereas it was 68.3 ± 8.3 for group B, and the difference was statistically significant (p < 0.01). Furthermore, the subjective evaluation and aesthetic subjective satisfaction values of group B were lower than group A (p < 0.01). Conclusions: Reduction loss of more than 3 mm was observed in 25% of patients after arthroscopic fixation of acute acromioclavicular dislocations using a double-button device. Although this loss did not create a statistically significant difference in Constant scores, AC joint-specific tests such as ACJI, subjective evaluation, and aesthetic subjective satisfaction values were significantly impaired. [ABSTRACT FROM AUTHOR]

BACKGROUND: There are many ways to treat acromioclavicular joint dislocation, but there is no uniform standard. The therapeutic efficacy is affected by the damage mechanism, the type of dislocation, the choice of treatment mode and postoperative exercise. OBJECTIVE: To summarize the research progress in acromioclavicular joint dislocation. METHODS: The first author searched literature from PubMed (2010-2019) and WanFang (2010-2019) databases. The key words were "acromioclavicular; dislocation; diagnosis; therapy; anatomical reconstruction; endobutton; internal fixators" in English and Chinese, respectively. After repeated studies were excluded, totally 2 187 articles were retrieved, and 55 eligible articles were included for result analysis. RESULTS AND CONCLUSION: At present, Rockwood types I and II are usually treated nonoperatively, while injures of Rockwood types IV-VI are treated surgically. The treatment of Rockwood type Ill is still controversial. In order to maximize the shoulder function, it is recommended to take active surgery for young and functionally demanding patients. Non-surgical treatment is mainly based on strap fixation. Surgical treatment is increasingly oriented to minimally invasive anatomical reconstruction of the coracoclavicular ligament, for example, Endobutton technique assisted by arthroscopy. Although good short-term results can be obtained, long-term follow-up studies with large samples are still needed to confirm its value in clinical application. Further investigations on the treatment of acromioclavicular joint dislocation are warranted. It has been sought for a surgical method that can achieve anatomical reduction and durable stability and ensure micro-motion of the acromioclavicular joint. [ABSTRACT FROM AUTHOR]

Background: The biceps brachii is the main forearm supinator, which is a direct consequence of its anatomic arrangement. The primary aim of distal biceps rupture is to restore supination strength and function. Cadaveric studies demonstrate that anatomic repairs significantly improve the supination moment when compared to more anterior repairs; however, this has not been tested in the clinical setting. The aim of this study was to compare biomechanical and clinical outcomes of an anatomic repair (Footprint), with a widely used transosseous technique (Endobutton). Methods: Twenty-two patients were retrospectively identified from a clinical database (11 Footprint versus 11 Endobutton). Biomechanical performance of strength and endurance for flexion and supination was assessed using a validated isokinetic dynamometry protocol and clinical outcome scores (Quick Disabilities of the Arm, Shoulder and Hand Outcome Measure and the Mayo Elbow Performance Score) were collected for all patients. Results: For supination, the Footprint group demonstrated a superior trend for all biomechanical parameters tested. This was statistically significant for mean peak torque, total work of maximal repetition and work in the last third of repetitive testing (p = 0.031, p = 0.036 and p = 0.048). For flexion, the Footprint group demonstrated a superior trend for all biomechanical parameters tested but this was only statistically significant for work in the last third of repetitive testing (p = 0.039). The clinical outcomes were good or excellent for all patients in both groups. Conclusion: This study is the first to demonstrate that an anatomic Footprint repair restores superior biomechanical supination strength and endurance compared to a conventional Endobutton technique in a clinical setting. Both techniques, however, provide good or excellent clinical outcomes. [ABSTRACT FROM AUTHOR]

Introduction: A commonly used method of fixation of the transferred coracoid in the traditional Latarjet-Bristow procedure (open or arthroscopic) is by two bicortical screws. Although mechanically effective, screw fixation is also a major source of hardware and neurologic complications. This study aimed to compare the biomechanical performances of traditional metal screws and endobuttons as fixators of the Latarjet-Bristow procedure.Materials and Methods: Nine fresh-frozen cadaveric human scapulae with the conjoined tendon attached to the coracoid process were used for the Latarjet-Bristow procedure. The specimens were randomly assigned one of two groups: fixation using two 4.5-mm cannulated partially threaded Latarjet-Bristow experience screws or fixation using a suture-button construct. Specimens were secured in a material testing machine and cyclically preconditioned from 2 to 10 N at 0.1 Hz for ten cycles. They were then pulled to failure at a normalized displacement rate of 400% of the measured gauge length per minute. The maximal load-to-failure, stiffness and stress were calculated using a custom script. The failure mechanism and site were recorded for each specimen.Results: There were no significant differences in the maximal load-to-failure or other biomechanical properties of the two fixation techniques, but the failure mechanisms were unique to each one. Four specimens fixated with screws underwent graft failures (fracture) through the proximal or distal drill hole. Five specimens fixated with endobuttons underwent failure due to glenoid bone fractures.Conclusions: A single endobutton fixation appears to be biomechanically comparable to screw fixation in the Latarjet-Bristow procedure and provides a lower risk for graft fracture. Further studies with more numerous specimens are warranted to conclusively validate these findings. [ABSTRACT FROM AUTHOR]

The present study aimed to assess a novel modified keyhole fixation technique to treat long head of biceps (LHB) rupture. From May 2015 to July 2017, a total of 9 patients with LHB rupture, decreased muscle strength and pop-eye sign were treated using the keyhole fixation technique combined with extramedullary cortical bone microplate-suspending fixation. Measurements of visual analog scale (VAS) score, elbow joint rotation, flexion strength, the Shoulder Score of the University of California Los Angeles (UCLA) and the Rating Scale of American Shoulder Elbow Surgeons (ASES) score were used to evaluate surgical outcomes prior to and following surgery. The 9 patients with LHB rupture included in the study were followed up for one year post-surgery. The supination and flexion elbow strength of all patients after 1 year was grade V and shoulder pain was relieved. The VAS, UCLA shoulder and ASES scores at one year post-surgery were significantly improved compared with those prior to surgery. In conclusion, modified keyhole fixation for LHB rupture features low difficulty of operation, high safety and reliable fixation, and is therefore a promising novel technique for the treatment of LHB rupture. [ABSTRACT FROM AUTHOR]

Abstract Background Treatment of acute (≤3 weeks) acromioclavicular joint dislocation type III–VI is still controversial. Currently, the two modern techniques that are widely used are hook plate (HP) fixation and coracoclavicular ligament fixation using a suspensory loop device that consists of either a tightrope (single or double), endo-button (single or double), or synthetic ligament and absorbable polydioxansulfate sling. Materials and methods This systematic review was conducted according to the PRISMA guidelines. Relevant studies that reported Constant-Murley score (CMS), Pain Visual Analog score (VAS) and postoperative complications of either technique were identified from Medline and Scopus from inception to 5 October 2015. Results Sixteen studies were included for the analysis of HP fixation, and 25 studies were included for analysis of loop suspensory fixation (LSF). Pooling of mean CMS and VAS scores gave 90.35 (95% CI 87.16, 93.54), 1.51 (95% CI 0.73, 2) in the HP group, and 92.48 (95% CI 90.91, 94.05), 0.32 (95% CI 0, 0.64) in the suspensory loop devices group, respectively. The pooled unstandardized mean differences (UMD) scores of CMS and VAS in LSF were 2.13 (95% CI −1.43, 5.69) and −1.19 (95% CI −2.03, −0.35) when compared to hook plating. The pooled prevalence of LSF and hook plating were 0.08 (95% CI 0.06, 0.10) and 0.05 (95% CI 0.02, 0.08) scores. The chance of having complications in the LSF group was 1.69 (95% CI 1.07, 2.60), which was statistically significantly higher than in the HP group. Conclusion LSF have higher shoulder function scores (CMS) and lower postoperative pain when compared to HP fixation; however, there are higher complication rates with LSF when compared to hook plating. Level of evidence IV.

Background: Fixation of tendon transfers in pediatric feet typically involves passing a suture that is secured to a tendon, through an intraosseous tunnel, and tying it over an external button on the plantar foot, with appropriate tension. After adequate time is allowed for bone-tendon healing, the suture and button are removed. This construct can be complicated by suture breakage with loss of fixation, and/or skin ulceration under the button. Internal suspension systems of tendons and ligaments in adults have demonstrated excellent fixation strength and minimal intraosseous tunnel displacement, with no risk of skin ulceration and no need for suture and button removal. This study compared the biomechanical properties of the suture-external button and internal suspension fixation techniques in cadavers. The primary outcome and secondary outcomes were displacement of suture-fixation construct during dynamic loading, and static loading, respectively. Methods: Nine adult cadaver feet were obtained. Both the external button and internal suspension techniques were tested once in each cadaver, in random order. Relative displacement of the fixation construct within the bone tunnel was recorded with video capture during dynamic and static loading. A custom Matlab script processed video and materials testing data. Static and cyclic displacements were analyzed between fixation groups using a paired t test (alpha value =0.05). Results: Internal suspension fixation had significantly less mean displacement of the tendon within the bone tunnel than the external button technique during dynamic (0.3 mm internal suspension system, 0.7 mm external button, P =.0115) and static loading (0.4 mm internal suspension system, 2.2 mm external button, P =.0019). Conclusions: Internal suspension systems may provide superior fixation compared to the traditional external button for tendon transfers, with the added benefit of avoiding the risk of skin ulceration and the need for suture and button removal. Clinical Relevance: It appears internal suspension method of tendon transfer fixation would be an acceptable alternative to traditional methods of fixation with an external button. [ABSTRACT FROM AUTHOR]

Copyright of Polish Journal of Sports Medicine / Medycyna Sportowa is the property of Agencja Wydawnicza Medsportpress Sp. z o. o. and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)