Search

One of the approaches to restoring the structure of damaged cartilage tissue is an intra-articular injection of tissue-engineered medical products (TEMPs) consisting of biocompatible matrices loaded with cells. The most interesting are the absorbable matrices from decellularized tissues, provided that the cellular material is completely removed from them with the maximum possible preservation of the structure and composition of the natural extracellular matrix. The present study investigated the mechanical, biochemical, and biological properties of decellularized porcine cartilage microparticles (DCMps) obtained by techniques, differing only in physical treatments, such as freeze-thaw cycling (Protocol 1), supercritical carbon dioxide fluid (Protocol 2) and ultrasound (Protocol 3). Full tissue decellularization was achieved, as confirmed by the histological analysis and DNA quantification, though all the resultant DCMps had reduced glycosaminoglycans (GAGs) and collagen. The elastic modulus of all DCMp samples was also significantly reduced. Most notably, DCMps prepared with Protocol 3 significantly outperformed other samples in viability and the chondroinduction of the human adipose-derived stem cells (hADSCs), with a higher GAG production per DNA content. A positive ECM staining for type II collagen was also detected only in cartilage-like structures based on ultrasound-treated DCMps. The biocompatibility of a xenogenic DCMps obtained with Protocol 3 has been confirmed for a 6-month implantation in the thigh muscle tissue of mature rats (n = 18). Overall, the results showed that the porcine cartilage microparticles decellularized by a combination of detergents, ultrasound and DNase could be a promising source of scaffolds for TEMPs for cartilage reconstruction.

In situ bioprinting is one of the most clinically relevant techniques in the emerging bioprinting technology because it could be performed directly on the human body in the operating room and it does not require bioreactors for post-printing tissue maturation. However, commercial in situ bioprinters are still not available on the market. In this study, we demonstrated the benefit of the originally developed first commercial articulated collaborative in situ bioprinter for the treatment of full-thickness wounds in rat and porcine models. We used an articulated and collaborative robotic arm from company KUKA and developed original printhead and correspondence software enabling in situ bioprinting on curve and moving surfaces. The results of in vitro and in vivo experiments show that in situ bioprinting of bioink induces a strong hydrogel adhesion and enables printing on curved surfaces of wet tissues with a high level of fidelity. The in situ bioprinter was convenient to use in the operating room. Additional in vitro experiments (in vitro collagen contraction assay and in vitro 3D angiogenesis assay) and histological analyses demonstrated that in situ bioprinting improves the quality of wound healing in rat and porcine skin wounds. The absence of interference with the normal process of wound healing and even certain improvement in the dynamics of this process strongly suggests that in situ bioprinting could be used as a novel therapeutic modality in wound healing.

A method is proposed of fabricating tubular constructs from tissue spheroids (conglomerates of cells up to 200 μm in size) in a nutrient fluid using the acoustic radiation force. The source of the acoustic field is a hollow piezoceramic cylinder with a resonant frequency of 800 kHz. Keeping the obtained structure at 37°C for 24 h fuses the spheroids into a solid tubular viable tissue construct.

The calcium phosphate particles can be used as building blocks for fabrication of 3D scaffolds intended for bone tissue engineering. This work presents for the first time a rapid creation of 3D scaffolds using magnetic levitation of calcium phosphate particles. Namely, tricalcium phosphate particles of equal size and certain porosity are used, which undergo the process of recrystallization after magnetic levitational assembly of the scaffold to ensure stitching of the scaffold. Label-free levitational assembly is achieved by using a custom-designed magnetic system in the presence of gadolinium salts, which allows the levitation of calcium phosphate particles. Chemical transformation of tricalcium- to octacalcium phosphate under the condition of magnetic levitation in non-homogeneous magnetic field is also demonstrated. This approach allows obtaining rapidly the octacalcium phosphate phase in the final 3D product, which is biocompatible.

In traditional tissue engineering, synthetic or natural scaffolds are usually used as removable temporal support, which involves some biotechnology limitations. The concept of "scaffield" approach utilizing the physical fields instead of biomaterial scaffold has been proposed recently. In particular, a combination of intense magnetic and acoustic fields can enable rapid levitational bioassembly of complex-shaped 3D tissue constructs from tissue spheroids at low concentration of paramagnetic agent (gadolinium salt) in the medium. In the current study, the tissue spheroids from human bladder smooth muscle cells (myospheres) are used as building blocks for assembling the tubular 3D constructs. Levitational assembly is accomplished at low concentrations of gadolinium salts in the high magnetic field at 9.5 T. The biofabricated smooth muscle constructs demonstrate contraction after the addition of vasoconstrictive agent endothelin-1. Thus, hybrid magnetoacoustic levitational bioassembly is considered as a new technology platform in the emerging field of formative biofabrication. This novel technology of scaffold-free, nozzle-free, and label-free bioassembly opens a unique opportunity for rapid biofabrication of 3D tissue and organ constructs with complex geometry.

Changes in bacterial physiology caused by the combined action of the magnetic force and microgravity were studied in

Magnetic tissue engineering is one of the rapidly emerging and promising directions of tissue engineering and biofabrication where the magnetic field is employed as temporal removal support or scaffold. Iron oxide nanoparticles are used to label living cells and provide the desired magnetic properties. Recently, polymer microcapsules loaded with iron oxide nanoparticles have been proposed as a novel approach to designing magnetic materials with high local concentrations. These microcapsules can be readily internalized and retained intracellularly for a long time in various types of cells. The low cytotoxicity of these microcapsules was previously shown in 2D cell culture. This paper has demonstrated that cells containing these nontoxic nanomaterials can form viable 3D tissue spheroids for the first time. The spheroids retained labeled fluorescent microcapsules with magnetic nanoparticles without a detectable cytotoxic effect. The high concentration of packed nanoparticles inside the microcapsules enables the evident magnetic properties of the labeled spheroids to be maintained. Finally, magnetic spheroids can be effectively used for magnetic patterning and biofabrication of tissue-engineering constructs.

One of the tasks of anticancer photodynamic therapy is increasing the efficacy of treatment of cancer nodes with large (clinically relevant) sizes using near-infrared photosensitizers (PS). We study the photodynamic action against A549 human lung cancer cells using PS based on polycationic derivatives of synthetic bacteriochlorin.The efficacy and mechanisms of the photodynamic action of PS based on polycationic derivatives of synthetic bacteriochlorin against A549 lung cancer cells were studied in vitro using immunocytochemical and morphological methods.It was found that PS based on tetracationic and octacationic derivatives of synthetic bacteriochlorin induce necrosis, apoptosis, decreasing of proliferative and mitotic activity, as well as reducing the number of ALDH1-positive cancer cells with signs of stem cells in A549 human lung cancer cell culture. The ICPhotosensitizers based on polycationic derivatives of synthetic bacteriochlorin have high phototoxicity against A549 cancer cells caused by the induction of necrosis and apoptosis of cancer cells, including cells with signs of stemness, and a sharp decrease of mitotic and proliferative activity.

We present a 3D study of nanostructural features of a bioprinted tissue spheroid interacting with polyurethane dual-scale biocompatible scaffold manufactured by three-dimensional printing and electrospinning. Three-dimensional analysis of fibroblasts interacting with electrospun polyurethane fibers was conducted using scanning probe nanotomography with an experimental setup combining ultramicrotome and a scanning probe microscope. Three-dimensional reconstruction demonstrates direct visualization of cell membrane protrusions and coherent cell-fiber interfaces, the formation of which is a prerequisite for an efficient tissue engineered implant. Analysis of obtained 3D data allows for quantitative calculation of the important morphological parameters of adhered cells, scaffolds, and cell-scaffold interfaces. The proposed method may be successfully applied to investigate 3D cell-scaffold constructs at nanoscale.

The review focuses on techniques for scalable standardized tissue spheroids biofabrication, on tissue spheroids biological properties and the methods for its morphology evaluation. The comparative analysis of existing approaches provided here will guide to the optimal protocol for tissue spheroids fabrication and characterization. Key words: tissue spheroids, biofabrication, bioprinting, drug discovery, morphology evaluation

Cytoskeleton systems, actin microfilaments, microtubules (MTs) and intermediate filaments (IFs) provide the biomechanical stability and spatial organization in cells. To understand the specific contributions of each cytoskeleton systems to intrinsic properties of spheroids, we've scrutinized the effects of the cytoskeleton perturbants, cytochalasin D (Cyto D), nocodazole (Noc) and withaferin A (WFA) on fusion, spreading on adhesive surface, morphology and biomechanics of chondrospheres (CSs). We confirmed that treatment with Cyto D but not with Noc or WFA severely affected CSs fusion and spreading dynamics and significantly reduced biomechanical properties of cell aggregates. Noc treatment affected spheroids spreading but not the fusion and surprisingly enhanced their stiffness. Vimentin intermediate filaments (VIFs) reorganization affected CSs spreading only. The analysis of all three cytoskeleton systems contribution to spheroids intrinsic properties was performed for the first time.

The feasibility of magnetic levitational bioassembly of tissue-engineered constructs from living tissue spheroids in the presence of paramagnetic ions (i.e. Gd3+) was recently demonstrated. However, Gd(3+)is relatively toxic at concentrations above 50 mM normally used to enable magnetic levitation with NdFeB-permanent magnets. Using a high magnetic field (a 50 mm-bore, 31 T Bitter magnet) at the High Field Magnet Laboratory at Radboud University in Nijmegen, The Netherlands, we performed magnetic levitational assembly of tissue constructs from living spheroids prepared from the SW1353 chondrosarcoma cell line at 0.8 mM Gd(3+)containing salt gadobutrol at 19 T magnetic field. The parameters of the levitation process were determined on the basis of polystyrene beads with a 170 mu m-diameter. To predict the theoretical possibility of assembly, a zone of stable levitation in the horizontal and vertical areas of cross sections was previously calculated. The construct from tissue spheroids partially fused after 3 h in levitation. The analysis of viability after prolonged exposure (1 h) to strong magnetic fields (up to 30 T) showed the absence of significant cytotoxicity or morphology changes in the tissue spheroids. A high magnetic field works as a temporal and removal support or so-called 'scaffield'. Thus, formative biofabrication of tissue-engineered constructs from tissue spheroids in the high magnetic field is a promising research direction

Collagen is one of the most promising materials for 3D bioprinting because of its distinguished biocompatibility. Cell-laden constructs made of pure collagen with or without incorporated growth supplements support engineered constructs persistence in culture and are perfectly suitable for grafting. The limiting factor for direct 3D collagen printing was poor printability of collagen solutions, especially admixed with cells or tissue spheroids. In our study, we showed that concentrated solutions of native collagen branded Viscoll were effective as bioinks with high fidelity performance. Viscoll containing 20, 30, or 40 mg/ml collagen were used for direct extrusion 3D bioprinting to form scaffolds appropriate to support spatial arrangement of tissue spheroids into rigid patterns with resolution of 0.5 mm in details. Incorporated cells demonstrated sufficient viability. Associated rheological study showed that good printability of the collagen solutions correlates with their increased storage modulus value, notably exceeding the loss modulus value. The proper combination of these physical parameters could become technological criteria for manufacturing various collagen bioinks for 3D bioprinting.

This paper presents the method of magneto-acoustic biofabrication of a bioengineering construct from tissue spheroids. It allows creating tissue constructs of tubular shapes. Collected together in a magneto-acoustic trap, tissue spheroids contact with each other and thus fuse to form a 3D tissue construct. The magnetic system was made of two oppositely oriented permanent magnets with an empty space between them. A cylindrical ultrasonic transducer was placed into this space, and a container with tissue spheroids was placed inside the piezoceramic cylinder. The construct was formed in the region, where magnetophoretic forces in the vertical direction compensated gravity, and due to the magnetic gradient in the horizontal plane, the tissue spheroids moved towards each other, levitating above the bottom of the container. The piezoelectric transducer created standing cylindrical ultrasonic waves. The acoustic radiation force acted from the antinode to the node, forming a ring of tissue spheroids. Holding them in this trap for 18–20 hours led to the merging of spheroids into a solid ring-shaped living construct. Changes of the wave frequency and amplitude made it possible to manipulate the size and width of the resulting tissue ring.

This paper presents a study of nanostructural features of contacts of bioprinted tissue spheroids with polyurethane dual scale biocompatible scaffold made by three-dimensional printing and electrospinning. Analysis of nanostructural features of cell contacts was carryed out by scanning probe microscopy with use of experimental setup combining ultramicrotome and scanning probe microscope. Measured mean cell volume is 460 ± 104 μm3, mean contact area of cells with scaffold fibers–104.8 μm2 per cell (16.7% of total cell area). Maximum distance of migrating cells from spheroid border at 48 h. is ~200 μm, what corresponds to mean velocity of cell migration more than 4 μm/h. Obtained quantitative characteristics of micro- and nanostructure of human fibroblast cell contacts with elecrospun polyurethane scaffold secure high efficacy of tissue regeneration with its usage for implanted bioprinted dual scale tissue-engineered scaffolds.

Tissue spheroids formed from fibroblasts using a micromolded non-adhesive hydrogel were located using a three-dimensional (3D) bioprinter on the surface of a nanofibrous polyurethane matrix produced by electrospinning. It was shown that the tissue spheroids attach to the matrix surface within a few hours and completely flatten after several days, indicating high biocompatibility of the matrix used. Tissue structures formed by the attachment and spreading of tissue spheroids on an electrospun matrix are a new technological platform for biofabrication and 3D bioprinting of tissues and organs.

Reproducible, scalable, and cost effective fabrication and versatile characterization of tissue spheroids (TS) is highly demanded by 3D bioprinting and drug discovery. Consistent geometry, defined mechanical properties, optimal viability, appropriate extracellular matrix/cell organization are required for cell aggregates aimed for application in these fields. A straightforward procedure for fabrication and systematic multiparametric characterization of TS with defined properties and uniform predictable geometry employing non-adhesive technology is suggested. Applying immortalized and primary cells, the reproducibility of spheroid generation, the strong correlation of ultimate spheroid diameter, and growth pattern with cell type and initial seeding concentration are demonstrated. Spheroids viability and mechanical properties are governed by cell derivation. In this study, a new decision procedure to apply for any cell type one starts to work with to prepare and typify TS meeting high quality standards in biofabrication and drug discovery is suggested.

Objective Chondrospheres represent a variant of tissue spheroids biofabricated from chondrocytes. They are already being used in clinical trials for cartilage repair; however, their biomechanical properties have not been systematically investigated yet. The aim of our study was to characterize chondrospheres in long-term in vitro culture conditions for morphometric changes, biomechanical integrity, and their fusion and spreading kinetics. Results It has been demonstrated that the increase in chondrospheres secant modulus of elasticity is strongly associated with the synthesis and accumulation of extracellular matrix. Additionally, significant interplay has been found between biomechanical properties of tissue spheroids and their fusion kinetics in contrast to their spreading kinetics. Conclusions Extracellular matrix is one of the main structural determinants of chondrospheres biomechanical properties during chondrogenic maturation in vitro. The estimation of tissue spheroids’ physical behavior in vitro prior to operative treatment can be used to predict and potentially control fusogenic self-assembly process after implantation in vivo.

Bioprinting can be defined as additive biofabrication of three-dimensional (3D) tissues and organ constructs using tissue spheroids, capable of self-assembly, as building blocks. The thyroid gland, a relatively simple endocrine organ, is suitable for testing the proposed bioprinting technology. Here we report the bioprinting of a functional vascularized mouse thyroid gland construct from embryonic tissue spheroids as a proof of concept. Based on the self-assembly principle, we generated thyroid tissue starting from thyroid spheroids (TS) and allantoic spheroids (AS) as a source of thyrocytes and endothelial cells (EC), respectively. Inspired by mathematical modeling of spheroid fusion, we used an original 3D bioprinter to print TS in close association with AS within a collagen hydrogel. During the culture, closely placed embryonic tissue spheroids fused into a single integral construct, EC from AS invaded and vascularized TS, and epithelial cells from the TS progressively formed follicles. In this experimental setting, we observed formation of a capillary network around follicular cells, as observed during in utero thyroid development when thyroid epithelium controls the recruitment, invasion and expansion of EC around follicles. To prove that EC from AS are responsible for vascularization of the thyroid gland construct, we depleted endogenous EC from TS before bioprinting. EC from AS completely revascularized depleted thyroid tissue. The cultured bioprinted construct was functional as it could normalize blood thyroxine levels and body temperature after grafting under the kidney capsule of hypothyroid mice. Bioprinting of functional vascularized mouse thyroid gland construct represents a further advance in bioprinting technology, exploring the self-assembling properties of tissue spheroids.

Organ printing is a computer-aided additive biofabrication of functional three-dimensional human tissue and organ constructs according to digital model using the tissue spheroids as building blocks. The fundamental biological principle of organ printing technology is a phenomenon of tissue fusion. Closely placed tissue spheroids undergo tissue fusion driven by surface tension forces. In order to ensure tissue fusion in the course of post-printing, tissue spheroids must be placed and maintained close to each other. We report here that tissue spheroids biofabricated from primary human fibroblasts could be placed and maintained on the surface of biocompatible electrospun polyurethane matrix using 3D bioprinter according to desirable pattern. The patterned tissue spheroids attach to polyurethane matrix during several hours and became completely spread during several days. Tissue constructions biofabricated by spreading of patterned tissue spheroids on the biocompatible electrospun polyurethane matrix is a novel technological platform for 3D bioprinting of human tissue and organs.

The molecular mechanisms of DNA recognition and modification by EcoRII DNA methyltransferase (M.EcoRII) were studied using 14-mer substrate analogs containing 2-aminopurine or 1′,2′-dideoxy-D-ribofuranose in the M.EcoRII recognition site. The efficiency of DNA binding and methylation depended on the position of a modified nucleoside residue in the recognition site. A structural model of M.EcoRII in complex with substrate DNA and the cofactor analog S-adenosyl-L-homocysteine (AdoHcy) was constructed using the available crystal structures of M.Hha and M.HaeIII and the recent Frankenstein’s monster approach. The amino acid residues interacting with DNA were predicted based on the model. In addition, theoretical and experimental findings made it possible to predict the groups of atoms of the heterocyclic bases of the M.EcoRII recognition site that are presumably involved in the interactions with the enzyme.

Affinity modification of EcoRII DNA methyltransferase (M x EcoRII) by DNA duplexes containing oxidized 2'-O-beta-D-ribofuranosylcytidine (Crib*) or 1-(beta-D-galactopyranosyl)thymine (Tgal*) residues was performed. Cross-linking yields do not change irrespective of whether active Crib* replaces an outer or an inner (target) deoxycytidine within the EcoRII recognition site. Chemical hydrolysis of M x EcoRII in the covalent cross-linked complex with the Tgal*-substituted DNA indicates the region Gly268-Met391 of the methylase that is likely to interact with the DNA sugar-phosphate backbone. Both specific and non-specific DNA interact with the same M x EcoRII region. Our results support the theoretically predicted DNA binding region of M x EcoRII.

Prokaryotic DNA methyltransferase M.SssI recognizes and methylates C5 position of the cytosine residue within the CG dinucleotides in DNA. It is an excellent model for studying the mechanism of interaction between CG-specific eukaryotic methyltransferases and DNA. We have built a structural model of M.SssI in complex with the substrate DNA and its analogues as well as the cofactor analogue S-adenosyl-L-homocysteine (AdoHcy) using the previously solved structures of M.HhaI and M.HaeIII as templates. The model was constructed according to the recently developed "FRankenstein's monster" approach. Based on the model, amino acid residues taking part in cofactor binding, target recognition and catalysis were predicted. We also modeled covalent modification of the DNA substrate and studied its influence on protein-DNA interactions.