Search

Abstract Nanostructured surfaces are effective at physically killing bacterial cells, highlighting their prospective application as biomaterials. The benefits of application of mechano‐bactericidal nanostructures as an alternative to chemical functionalisation are well documented, however, the effects of protein adsorption are not well understood. In this work, theoretical and experimental analyses are conducted by studying the adsorption of human serum proteins (HSP) to nanosheet titanium (Ti) and its subsequent effect on the mechano‐bactericidal efficacy toward Staphylococcus aureus and Pseudomonas aeruginosa cells. The nanosheet pattern exhibits enhanced antibiofouling behaviour mantaining high bactericidal efficiency toward both Gram‐negative and Gram‐positive cells in the presence of adsorbed HSP. To ascertain the immunomodulatory response, S. aureus cells are introduced to protein‐conditioned Ti nanosheet surfaces prior to introducing RAW 264.7 macrophages. On the pre‐infected nanostructured surfaces, macrophages exhibit wound healing behaviour with superior activation of M2‐like macrophage polarization and secretion of anti‐inflammatory cytokines. By contrast, macrophages attached to infected smooth surfaces activated the M1‐like polarized phenotype via the high expression of pro‐inflammatory cytokines, indicating persistent inflammation. The outcomes of this work demonstrate the suitability of Ti nanosheets as a potential biomaterial surface whereby the mechano‐bactericidal activity is not compromised by HSP adsorption and, furthermore, positively influenced an anti‐inflammatory immune response.

The routes by which foreign objects enter cells is well studied; however, their fate following uptake has not been explored extensively. Following exposure to synchrotron-sourced (SS) terahertz (THz) radiation, reversible membrane permeability has been demonstrated in eukaryotic cells by the uptake of nanospheres; nonetheless, cellular localization of the nanospheres remained unclear. This study utilized silica core-shell gold nanospheres (AuSi NS) of diameter 50 ± 5 nm to investigate the fate of nanospheres inside pheochromocytoma (PC 12) cells following SS THz exposure. Fluorescence microscopy was used to confirm nanosphere internalization following 10 min of SS THz exposure in the range 0.5–20 THz. Transmission electron microscopy followed by scanning transmission electron microscopy energy-dispersive spectroscopic (STEM-EDS) analysis was used to confirm the presence of AuSi NS in the cytoplasm or membrane, as single NS or in clusters (22% and 52%, respectively), with the remainder (26%) sequestered in vacuoles. Cellular uptake of NS in response to SS THz radiation could have suitable applications in a vast number of biomedical applications, regenerative medicine, vaccines, cancer therapy, gene and drug delivery.

Abstract The proportion of hospital‐acquired medical device infections caused by pathogenic, multi‐drug resistant Candida species occurs in up to 10% of implantations. In this study, a unique antifungal micro‐pillared titanium surface pattern is developed, which demonstrates both fungicidal and fungistatic activity, persistently deterring biofilm formation by Candida albicans and multi‐drug resistant Candida auris fungi for up to 7 days. The Ti micropillars of 3.5 µm height are fabricated using maskless inductively coupled plasma reactive ion etching. The micro‐textured surface consistently kills ≈50% of Candida spp. irreversibly attached cells and prevent the proliferation of the remaining cells by inducing programmed cell death. Proteomic analysis reveals that Candida cells undergo extensive metabolic stress, preventing the transformation from yeast to the filamentous/hyphal cell phenotype that is essential for establishing a typical in vitro biofilm. The mechanical stress imparted following interaction with the micropillars injures attaching cells and induces apoptosis whereby the Candida cells are unable to be revived in a non‐stress environment. These findings shed new insight toward the design of durable antifungal surfaces that prevent biofilm formation by pathogenic, multi‐drug resistant yeasts.

Nanomaterials, specifically nano-topographies, have been explored for their antimicrobial activity toward bacteria, fungi and even viruses. A decade ago, we discovered that the nanopillar topography of insect wings such as cicadas, dragonflies and damselflies, were not repelling bacteria as previously surmised, but bacteria were attaching and consequently being killed. The nature of the bactericidal effect associated with nanostructured insect wings has been extended to include antimicrobial activity toward both to environmental and pathogenic fungi. Specifically, the antimicrobial nature is associated with the physical disintegration of attached microbes due to a mechanical stress imposed on the cell membrane, which stretches and breaks. This exciting new discovery implies that, if successfully replicated on the surface of biomaterials and implantable devices, systemic or local administration of antibiotics are no longer required to kill bacteria that attach on such surfaces.

After the resolution of the acute SARS-COV-2 infection, an important percentage of patients do not fully recover and continue to present several symptoms. Nevertheless, there is a lack of data in the literature on the effects of rehabilitation programs on medium- and long-term long COVID symptoms. Therefore, the aim of this study was to evaluate the long-term outcomes after rehabilitation programs in long COVID syndrome patients. A prospective cohort study was conducted from August 2021 to March 2022, involving 113 patients with long COVID syndrome. The patients in the experimental group (EG, n=25) received a tailored and multidisciplinary rehabilitative program, involving aquatic exercises, respiratory and motor exercises, social integration training and neuropsychologic sessions, LASER therapy and magnetotherapy. Patients in the other three comparison groups received eastern medicine techniques (CG1), balneotherapy and physiotherapy (group CG2), self-training and home-based physical exercise (CG3). Once the several rehabilitation protocols had been performed, a structured telephone contact was made with the patients after 6 months ± 7 days from the end of the rehabilitation treatment, in order to record the frequency of hospital ad-missions due to exacerbation of post-exacerbation syndrome, death or disability, and the need for other types of care or drugs. The patients in the comparison groups were more likely to request therapeutic care for emerging long COVID symptoms (χ2=6.635, p=0.001; χ2=13.463, p=0.001; χ2=10.949, p=0.001, respectively), as well as more likely to be hospitalized (χ2=5.357, p=0.021; χ2=0.125, p=0.724; χ2=0.856, p=0.355, respectively) when compared to the patients of the EG. The relative risk (RR) of hospital admissions in the observed cohort was 0.143 ±1,031 (СI: 0.019; 1.078); 0.580±1,194 (CI: 0.056; 6.022); 0,340±1,087 (CI: 0.040; 2.860). The RR of hospital admissions for patients with long COVID syndrome was reduced by 85.7%; 42.0% and 66.0%, respectively, when the experimental rehabilitation technique was employed. In conclusion, a tailored and multidisciplinary rehabilitative program seems to have a better preventive effect not only in the short term, but also over the next 6 months, avoiding the new onset of disabilities and the use of medicines and specialist advice, than other rehabilitative programs. Future studies will need to further investigate these aspects to identify the best rehabilitation therapy, also in terms of cost-effectiveness, for these patients.

Ultrasmall gold nanoclusters (AuNC) show great promise for application in theranostics due to their unique optical and physicochemical properties; however, the associated nanotoxicology concerns need to be carefully considered because of their high diffusion across the cellular barrier. Herein, new insights into the role of surface modification of 2 nm AuNC on their toxicity with impact on the metabolism of COS‐7 fibroblast‐like cells are revealed. AuNCs are chemically modified with either a monodentate‐thiolated molecule (AuNC‐MHA) or a modified‐bidentate sulfobetaine zwitterionic molecule (AuNC‐ZwBuEt). Uptake and localization inside fibroblasts and the resultant influence on cell ultrastructure are carefully evaluated using scanning transmission electron microscopy (STEM) and cryo‐soft‐X‐ray tomography (cryo‐SXT). At concentrations of ≥25 μg Au mL−1, AuNC‐ZwBuEt are cytotoxic toward COS‐7 cells and are observed to cross the nuclear membrane. Cryo‐SXT analysis shows that fibroblasts develop an acute stress response in the form of swollen mitochondria, nuclear membrane blebbing, and large cytoplasmic vacuoles as early as 1 h postexposure. By contrast, AuNC‐MHA are not cytotoxic toward COS‐7 cells. Endosomal escape and translocation of the AuNC‐ZwBuEt into the nucleus and other organelles may be the cause for the observed cytotoxicity and highlight the need for further study of metal nanocluster‐cell interactions.

Abstract As famed quantum physicist W. Pauli once said, “The surface was invented by the devil”. The nonequilibrium state of particles forming the surface, and the presence of dangling bonds transform the surfaces into a 2D reactor with high physical and chemical reactivity. When two such active surfaces are matched, their interface becomes even more reactive, giving rise to novel properties or enhanced performance. For this reason, much effort is applied to design nanoengineered interfacial systems for applications spanning all facets of human life. This review article discusses recent, mostly within two years, progress in the design of complex, sophisticated carbon‐based interfacial material systems for energy and photonics applications, with the aim to emphasize some of the most interesting and important examples of such systems. Differences in the processes that take place on flat and 3D (curved) surfaces are discussed, with the view of guiding the design and construction of complex functional interfaces, focusing on several points that are of particular importance to the ongoing development of advanced interfacial material systems.

The use of the fresh water aquatic training course, as a more gentle training method, may allow patients to ensure effective restoration of muscle functions responsible for maintaining an upright body position. A more accurate control of the course results can be performed using a virtual analysis carried out using the «Habilect» system that allows to determine the body parts attitude. Aim. To study the effect of training in fresh water using the Habilect system based on the Microsoft Kinect infrared sensor (video stabilometry) on motor functions that contribute to maintaining an upright body posture in patients with mild gait disturbances. Material and methods. An open descriptive study was conducted including 12 patients (7 men, 5 women), aged 40 to 62 years, with upright posture maintaining disorders, which correspond to the functional diagnosis encoded by the ICF «Gait Stereotype Functions» B770.1 – mild violations (5–24%). A group of subjects (n = 12), in addition to basic therapy and training with an exercise therapy instructor, underwent aquatic training in fresh water for two weeks (30 minutes, 6 days a week). Assessment methods: the research was carried out using the Habilect gait video analysis system before and after the rehabilitation course. The χ2 test was used to assess the significance of differences between groups of qualitative variables. When analyzing quantitative variables, the Shapiro-Wilk’s (W) test was performed. For abnormal distribution, the data is in Me format [Q25-Q75]. The Wilcoxon T-test was used to assess the significance of differences in quantitative variables of the two studied groups. The processing of the obtained research results was carried out using the Statistica for Windows, v. 8.0 (StatSoft Inc., USA) and Microsoft Excel (Microsoft, USA). The significance of the differences was considered established at p

Abstract Polymer matrix composite materials have the capacity to aid the indirect transmission of viral diseases. Published research shows that respiratory viruses, including severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2 or COVID‐19), can attach to polymer substrata as a result of being contacted by airborne droplets resulting from infected people sneezing or coughing in close proximity. Polymer matrix composites are used to produce a wide range of products that are “high‐touch” surfaces, such as sporting goods, laptop computers and household fittings, and these surfaces can be readily contaminated by pathogens. This article reviews published research on the retention of SARS‐CoV‐2 and other virus types on plastics. The factors controlling the viral retention time on plastic surfaces are examined and the implications for viral retention on polymer composite materials are discussed. Potential strategies that can be used to impart antiviral properties to polymer composite surfaces are evaluated. These strategies include modification of the surface composition with biocidal agents (e.g., antiviral polymers and nanoparticles) and surface nanotexturing. The potential application of these surface modification strategies in the creation of antiviral polymer composite surfaces is discussed, which opens up an exciting new field of research for composite materials.

Herein, we give an overview of several less explored structural and optical characterization techniques useful for biomaterials. New insights into the structure of natural fibers such as spider silk can be gained with minimal sample preparation. Electromagnetic radiation (EMR) over a broad range of wavelengths (from X-ray to THz) provides information of the structure of the material at correspondingly different length scales (nm-to-mm). When the sample features, such as the alignment of certain fibers, cannot be characterized optically, polarization analysis of the optical images can provide further information on feature alignment. The 3D complexity of biological samples necessitates that there be feature measurements and characterization over a large range of length scales. We discuss the issue of characterizing complex shapes by analysis of the link between the color and structure of spider scales and silk. For example, it is shown that the green-blue color of a spider scale is dominated by the chitin slab’s Fabry–Pérot-type reflectivity rather than the surface nanostructure. The use of a chromaticity plot simplifies complex spectra and enables quantification of the apparent colors. All the experimental data presented herein are used to support the discussion on the structure–color link in the characterization of materials.

Magnetic therapy (MT) is a non-drug method that improves the effectiveness of treatment of musculoskeletal pain, including:acute non-specific back pain (NBP). Objective of our study was to evaluate the results of complex treatment of patients with acute/subacute NBP at home using MT. The study group consisted of 339 patients with severe acute/subacute NBP. All patients received nonsteroidal anti-inflammatory drugs (NSAIDs). 166 patients (Group 1) received a course of MT (ALMAG+ device), 173 patients or a control group (Group 2) who did not receive MT. The dynamics of pain was significantly higher in group 1 than in group 2. So, the intensity of pain during movement (NRS) decreased from 7 [5;8] and 7 [5;8] to 0 [0;13] and 2 [1;3] after 1 month. (p

A variety of rehabilitation programmes can be offered to Long COVID patients, specifically physical training. Indeed 90% of these patients reports impairments of verticalization, stability and spatial orientation, making difficult exercise in the gym. The aim of our study was to assess the effectiveness and safety of aquatic exercise techniques as part of a comprehensive rehabilitation program for patients with Long COVID. The first of a two-stage program involved development of aquatic exercises technique, which was evaluated in 12 patients with impaired upright posture control before and after exercising by "Habilect" video gait analysis system. During the second phase, effectiveness and safety of aqua exercises were tested in water pool as part of a comprehensive rehabilitation programme conducted in 23 patients with Long COVID outcomes. Physical examination, 6-minute step test, Euro-QL-5D questionnaire, Borg scale, laser Doppler flowmetry, cardiointervalography, and spirometry were performed before and after the aquatic exercises program. After the training with aquatic exercises, indices of deviations of the main body axes of the head and the body mass centre ameliorated, as well as direction of body movement vector decreased (p

Exposure to high-frequency (HF) electromagnetic fields (EMFs) at 18 GHz was previously found to induce reversible cell permeabilization in eukaryotic cells; however, the fate of internalized foreign objects inside the cell remains unclear. Here, silica core–shell gold nanospheres (Au NS) of 20 ± 5 nm diameter were used to study the localization of Au NS in pheochromocytoma (PC 12) cells after exposure to HF EMFs at 18 GHz. Internalization of Au NS was confirmed using fluorescence microscopy and transmission electron microscopy. Analysis based on corresponding scanning transmission electron microscopy energy-dispersive spectroscopy revealed the presence of the Au NS free within the PC 12 cell membrane, cytoplasm, enclosed within intracellular vesicles and sequestered in vacuoles. The results obtained in this work highlight that exposure to HF EMFs could be used as an efficient technique with potential for effective delivery of drugs, genetic material, and nanomaterials into cells for the purpose of cellular manipulation or therapy.

Abstract Multispectral imaging technology is a valuable scientific tool for various applications in astronomy, remote sensing, molecular fingerprinting, and fluorescence imaging. In this study, we demonstrate a single camera shot, lensless, interferenceless, motionless, non-scanning, space, spectrum, and time resolved five-dimensional incoherent imaging technique using tailored chaotic waves with quasi-random intensity and phase distributions. Chaotic waves can distinctly encode spatial and spectral information of an object in single self-interference intensity distribution. In this study, a tailored chaotic wave with a nearly pure phase function and lowest correlation noise is generated using a quasi-random array of pinholes. A unique sequence of signal processing techniques is applied to extract all possible spatial and spectral channels with the least entropy. The depth-wavelength reciprocity is exploited to see colour from depth and depth from colour and the physics of beam propagation is exploited to see at one depth by calibrating at another.

The nanoscale composition of silk defining its unique properties via a hierarchial structural anisotropy needs to be analysed at the highest spatial resolution of tens of nanometers corresponding to the size of fibrils made of β-sheets, which are the crystalline building blocks of silk. Nanoscale optical and structural properties of silk have been measured from 100 nm thick longitudinal slices of silk fibers with ca. 10 nm resolution, the highest so far. Optical sub-wavelength resolution in hyperspectral mapping of absorbance and molecular orientation were carried out for comparison at IR wavelengths of 2–10 μm using synchrotron radiation. A reliable distinction of transmission changes by only 1–2% as the anisotropy of amide bands was obtained from nanometer-thin slices of silk.

Atomic force microscopy (AFM) was used to investigate the morphology and rigidity of the opportunistic pathogenic yeast, Candida albicans ATCC 10231, during its attachment to surfaces of three levels of nanoscale surface roughness. Non-polished titanium (npTi), polished titanium (pTi), and glass with respective average surface roughness (Sa) values of 389 nm, 14 nm, and 2 nm, kurtosis (Skur) values of 4, 16, and 4, and skewness (Sskw) values of 1, 4, and 1 were used as representative examples of each type of nanoarchitecture. Thus, npTi and glass surfaces exhibited similar Sskw and Skur values but highly disparate Sa. C. albicans cells that had attached to the pTi surfaces exhibited a twofold increase in rigidity of 364 kPa compared to those yeast cells attached to the surfaces of npTi (164 kPa) and glass (185 kPa). The increased rigidity of the C. albicans cells on pTi was accompanied by a distinct round morphology, condensed F-actin distribution, lack of cortical actin patches, and the negligible production of cell-associated polymeric substances; however, an elevated production of loose extracellular polymeric substances (EPS) was observed. The differences in the physical response of C. albicans cells attached to the three surfaces suggested that the surface nanoarchitecture (characterized by skewness and kurtosis), rather than average surface roughness, could directly influence the rigidity of the C. albicans cells. This work contributes to the next-generation design of antifungal surfaces by exploiting surface architecture to control the extent of biofilm formation undertaken by yeast pathogens and highlights the importance of performing a detailed surface roughness characterization in order to identify and discriminate between the surface characteristics that may influence the extent of cell attachment and the subsequent behavior of the attached cells.

Abstract One of the major challenges faced by the biomedical industry is the development of robust synthetic surfaces that can resist bacterial colonization. Much inspiration has been drawn recently from naturally occurring mechano-bactericidal surfaces such as the wings of cicada (Psaltoda claripennis) and dragonfly (Diplacodes bipunctata) species in fabricating their synthetic analogs. However, the bactericidal activity of nanostructured surfaces is observed in a particular range of parameters reflecting the geometry of nanostructures and surface wettability. Here, several of the nanometer-scale characteristics of black silicon (bSi) surfaces including the density and height of the nanopillars that have the potential to influence the bactericidal efficiency of these nanostructured surfaces have been investigated. The results provide important evidence that minor variations in the nanoarchitecture of substrata can substantially alter their performance as bactericidal surfaces.

Plasma polymer coatings fabricated from Melaleuca alternifolia essential oil and its derivatives have been previously shown to reduce the extent of microbial adhesion on titanium, polymers, and other implantable materials used in dentistry. Previous studies have shown these coatings to maintain their performance under standard operating conditions; however, when used in e.g., a dental implant, these coatings may inadvertently become subject to in situ cleaning treatments, such as those using an atmospheric pressure plasma jet, a promising tool for the effective in situ removal of biofilms from tissues and implant surfaces. Here, we investigated the effect of such an exposure on the antimicrobial performance of the Melaleuca alternifolia polymer coating. It was found that direct exposure of the polymer coating surface to the jet for periods less than 60 s was sufficient to induce changes in its surface chemistry and topography, affecting its ability to retard subsequent microbial attachment. The exact effect of the jet exposure depended on the chemistry of the polymer coating, the length of plasma treatment, cell type, and incubation conditions. The change in the antimicrobial activity for polymer coatings fabricated at powers of 20–30 W was not statistically significant due to their limited baseline bioactivity. Interestingly, the bioactivity of polymer coatings fabricated at 10 and 15 W against Staphylococcus aureus cells was temporarily improved after the treatment, which could be attributed to the generation of loosely attached bioactive fragments on the treated surface, resulting in an increase in the dose of the bioactive agents being eluted by the surface. Attachment and proliferation of Pseudomonas aeruginosa cells and mixed cultures were less affected by changes in the bioactivity profile of the surface. The sensitivity of the cells to the change imparted by the jet treatment was also found to be dependent on their origin culture, with mature biofilm-derived P. aeruginosa bacterial cells showing a greater ability to colonize the surface when compared to its planktonic broth-grown counterpart. The presence of plasma-generated reactive oxygen and nitrogen species in the culture media was also found to enhance the bioactivity of polymer coatings fabricated at power levels of 10 and 15 W, due to a synergistic effect arising from simultaneous exposure of cells to reactive oxygen and nitrogen species (RONS) and eluted bioactive fragments. These results suggest that it is important to consider the possible implications of inadvertent changes in the properties and performance of plasma polymer coatings as a result of exposure to in situ decontamination, to both prevent suboptimal performance and to exploit possible synergies that may arise for some polymer coating-surface treatment combinations.

Plasma-enhanced synthesis and modification of polymers is a field that continues to expand and become increasingly more sophisticated. The highly reactive processing environments afforded by the inherently dynamic nature of plasma media are often superior to ambient or thermal environments, offering substantial advantages over other processing methods. The fluxes of energy and matter toward the surface enable rapid and efficient processing, whereas the charged nature of plasma-generated particles provides a means for their control. The range of materials that can be treated by plasmas is incredibly broad, spanning pure polymers, polymer-metal, polymer-wood, polymer-nanocarbon composites, and others. In this review, we briefly outline some of the recent examples of the state-of-the-art in the plasma-based polymer treatment and functionalization techniques.

Quantitative phase imaging (QPI) techniques are widely used for the label-free examining of transparent biological samples. QPI techniques can be broadly classified into interference-based and interferenceless methods. The interferometric methods which record the complex amplitude are usually bulky with many optical components and use coherent illumination. The interferenceless approaches which need only the intensity distribution and works using phase retrieval algorithms have gained attention as they require lesser resources, cost, space and can work with incoherent illumination. With rapid developments in computational optical techniques and deep learning, QPI has reached new levels of applications. In this tutorial, we discuss one of the basic optical configurations of a lensless QPI technique based on the phase-retrieval algorithm. Simulative studies on QPI of thin, thick, and greyscale phase objects with assistive pseudo-codes and computational codes in Octave is provided. Binary phase samples with positive and negative resist profiles were fabricated using lithography, and a single plane and two plane phase objects were constructed. Light diffracted from a point object is modulated by phase samples and the corresponding intensity patterns are recorded. The phase retrieval approach is applied for 2D and 3D phase reconstructions. Commented codes in Octave for image acquisition and automation using a web camera in an open source operating system are provided.

The thermal properties of novel nanomaterials play a significant role in determining the performance of the material in technological applications. Herein, direct measurement of the temperature diffusivity of nanocellulose-doped starch–polyurethane nanocomposite films was carried out by the micro-contact method. Polymer films containing up to 2 wt%. of nanocellulose were synthesised by a simple chemical process and are biodegradable. Films of a high optical transmittance T≈80% (for a 200 μm thick film), which were up to 44% crystalline, were characterised. Two different modalities of temperature diffusivity based on (1) a resistance change and (2) micro-thermocouple detected voltage modulation caused by the heat wave, were used for the polymer films with cross sections of ∼100 μm thickness. Twice different in-plane α‖ and out-of-plane α⊥ temperature diffusivities were directly determined with high fidelity: α‖=2.12×10−7 m2/s and α⊥=1.13×10−7 m2/s. This work provides an example of a direct contact measurement of thermal properties of nanocellulose composite biodegradable polymer films. The thermal diffusivity, which is usually high in strongly interconnected networks and crystals, was investigated for the first time in this polymer nanocomposite.

The fabrication and characterization of photoanodes based on black-Si (b-Si) are presented using a photoelectrochemical cell in NaOH solution. B-Si was fabricated by maskless dry plasma etching and was conformally coated by tens-of-nm of TiO2 using atomic layer deposition (ALD) with a top layer of CoO x cocatalyst deposited by pulsed laser deposition (PLD). Low reflectivity R < 5 % of b-Si over the entire visible and near-IR ( λ < 2 μ m) spectral range was favorable for the better absorption of light, while an increased surface area facilitated larger current densities. The photoelectrochemical performance of the heterostructured b-Si photoanode is discussed in terms of the n-n junction between b-Si and TiO2.

Insects and plants are two types of organisms that are widely separated on the evolutionary tree; for example, plants are mostly phototrophic organisms whilst insects are heterotrophic organisms. In order to cope with environmental stresses, their surfaces have developed cuticular layers that consist of highly sophisticated structures. These structures serve a number of purposes, and impart useful properties to these surfaces. These two groups of organisms are the only ones identified thus far that possess truly superhydrophobic and self-cleaning properties. These properties result from their micro- and nano-scale structures, comprised of three-dimensional wax formations. This review analyzes the surface topologies and surface chemistry of insects and plants in order to identify the features common to both organisms, with particular reference to their superhydrophobic and self-cleaning properties. This information will be valuable when determining the potential application of these surfaces in the design and manufacture of superhydrophobic and self-cleaning devices, including those that can be used in the manufacture of biomedical implants.

Biomaterials that have been newly implanted inside the body are the substratum targets for a “race for the surface„, in which bacterial cells compete against eukaryotic cells for the opportunity to colonize the surface. A victory by the former often results in biomaterial-associated infections, which can be a serious threat to patient health and can undermine the function and performance of the implant. Moreover, bacteria can often have a ‘head start’ if implant contamination has taken place either prior to or during the surgery. Current prevention and treatment strategies often rely on systemic antibiotic therapies, which are becoming increasingly ineffective due to a growing prevalence of antibiotic-resistant bacteria. Nanostructured surfaces that kill bacteria by physically rupturing bacterial cells upon contact have recently emerged as a promising solution for the mitigation of bacterial colonization of implants. Furthermore, these nanoscale features have been shown to enhance the adhesion and proliferation of eukaryotic cells, which is a key to, for example, the successful osseointegration of load-bearing titanium implants. The bactericidal activity and biocompatibility of such nanostructured surfaces are often, however, examined separately, and it is not clear to what extent bacterial cell-surface interactions would affect the subsequent outcomes of host-cell attachment and osseointegration processes. In this study, we investigated the ability of bactericidal nanostructured titanium surfaces to support the attachment and growth of osteoblast-like MG-63 human osteosarcoma cells, despite them having been pre-infected with pathogenic bacteria. MG-63 is a commonly used osteoblastic model to study bone cell viability, adhesion, and proliferation on the surfaces of load-bearing biomaterials, such as titanium. The nanostructured titanium surfaces used here were observed to kill the pathogenic bacteria, whilst simultaneously enhancing the growth of MG-63 cells in vitro when compared to that occurring on sterile, flat titanium surfaces. These results provide further evidence in support of nanostructured bactericidal surfaces being used as a strategy to help eukaryotic cells win the “race for the surface„ against bacterial cells on implant materials.

With increasing global consumption and their natural resistance to degradation, plastic materials and their accumulation in the environment is of increasing concern. This review aims to present a general overview of the current state of knowledge in areas that relate to biodegradation of polymers, especially poly(ethylene terephthalate) (PET). This includes an outline of the problems associated with plastic pollution in the marine environment, a description of the properties, commercial manufacturing and degradability of PET, an overview of the potential for biodegradation of conventional polymers and biodegradable polymers already in production.

Marine microorganisms have evolved for millions of years to survive in the environments characterized by one or more extreme physical or chemical parameters, e.g., high pressure, low temperature or high salinity. Marine bacteria have the ability to produce a range of biologically active molecules, such as antibiotics, toxins and antitoxins, antitumor and antimicrobial agents, and as a result, they have been a topic of research interest for many years. Among these biologically active molecules, the carbohydrate antigens, lipopolysaccharides (LPSs, O-antigens) found in cell walls of Gram-negative marine bacteria, show great potential as candidates in the development of drugs to prevent septic shock due to their low virulence. The structural diversity of LPSs is thought to be a reflection of the ability for these bacteria to adapt to an array of habitats, protecting the cell from being compromised by exposure to harsh environmental stress factors. Over the last few years, the variety of structures of core oligosaccharides and O-specific polysaccharides from LPSs of marine microrganisms has been discovered. In this review, we discuss the most recently encountered structures that have been identified from bacteria belonging to the genera Aeromonas, Alteromonas, Idiomarina, Microbulbifer, Pseudoalteromonas, Plesiomonas and Shewanella of the Gammaproteobacteria phylum; Sulfitobacter and Loktanella of the Alphaproteobactera phylum and to the genera Arenibacter, Cellulophaga, Chryseobacterium, Flavobacterium, Flexibacter of the Cytophaga-Flavobacterium-Bacteroides phylum. Particular attention is paid to the particular chemical features of the LPSs, such as the monosaccharide type, non-sugar substituents and phosphate groups, together with some of the typifying traits of LPSs obtained from marine bacteria. A possible correlation is then made between such features and the environmental adaptations undertaken by marine bacteria.

The nanometer scale surface topography of a solid substrate is known to influence the extent of bacterial attachment and their subsequent proliferation to form biofilms. As an extension of our previous work on the development of a novel organic polymer coating for the prevention of growth of medically significant bacteria on three-dimensional solid surfaces, this study examines the effect of surface coating on the adhesion and proliferation tendencies of Staphylococcus aureus and compares to those previously investigated tendencies of Pseudomonas aeruginosa on similar coatings. Radio frequency plasma enhanced chemical vapor deposition was used to coat the surface of the substrate with thin film of terpinen-4-ol, a constituent of tea-tree oil known to inhibit the growth of a broad range of bacteria. The presence of the coating decreased the substrate surface roughness from approximately 2.1 nm to 0.4 nm. Similar to P. aeruginosa, S. aureus presented notably different patterns of attachment in response to the presence of the surface film, where the amount of attachment, extracellular polymeric substance production, and cell proliferation on the coated surface was found to be greatly reduced compared to that obtained on the unmodified surface. This work suggests that the antimicrobial and antifouling coating used in this study could be effectively integrated into medical and other clinically relevant devices to prevent bacterial growth and to minimize bacteria-associated adverse host responses.

Titanium is a biocompatible material that is frequently used for making implantable medical devices. Nanoengineering of the surface is the common method for increasing material biocompatibility, and while the nanostructured materials are well-known to represent attractive substrata for eukaryotic cells, very little information has been documented about the interaction between mammalian cells and bactericidal nanostructured surfaces. In this study, we investigated the effect of bactericidal titanium nanostructures on PC12 cell attachment and differentiation—a cell line which has become a widely used in vitro model to study neuronal differentiation. The effects of the nanostructures on the cells were then compared to effects observed when the cells were placed in contact with non-structured titanium. It was found that bactericidal nanostructured surfaces enhanced the attachment of neuron-like cells. In addition, the PC12 cells were able to differentiate on nanostructured surfaces, while the cells on non-structured surfaces were not able to do so. These promising results demonstrate the potential application of bactericidal nanostructured surfaces in biomedical applications such as cochlear and neuronal implants.

Cellular attachment plays a vital role in the differentiation of pheochromocytoma (PC12) cells. PC12 cells are noradrenergic clonal cells isolated from the adrenal medulla of Rattus norvegicus and studied extensively as they have the ability to differentiate into sympathetic neuron-like cells. The effect of several experimental parameters including (i) the concentration of nerve growth factor (NGF); (ii) substratum coatings, such as poly-L-lysine (PLL), fibronectin (Fn), and laminin (Lam); and (iii) double coatings composed of PLL/Lam and PLL/Fn on the differentiation process of PC12 cells were studied. Cell morphology was visualised using brightfield phase contrast microscopy, cellular metabolism and proliferation were quantified using a 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) assay, and the neurite outgrowth and axonal generation of the PC12 cells were evaluated using wide field fluorescence microscopy. It was found that double coatings of PLL/Lam and PLL/Fn supported robust adhesion and a two-fold enhanced neurite outgrowth of PC12 cells when treated with 100 ng/mL of NGF while exhibiting stable metabolic activity, leading to the accelerated generation of axons.

Extracellular polymeric substances (EPS) produced by microorganisms are a complex mixture of biopolymers primarily consisting of polysaccharides, as well as proteins, nucleic acids, lipids and humic substances. EPS make up the intercellular space of microbial aggregates and form the structure and architecture of the biofilm matrix. The key functions of EPS comprise the mediation of the initial attachment of cells to different substrata and protection against environmental stress and dehydration. The aim of this review is to present a summary of the current status of the research into the role of EPS in bacterial attachment followed by biofilm formation. The latter has a profound impact on an array of biomedical, biotechnology and industrial fields including pharmaceutical and surgical applications, food engineering, bioremediation and biohydrometallurgy. The diverse structural variations of EPS produced by bacteria of different taxonomic lineages, together with examples of biotechnological applications, are discussed. Finally, a range of novel techniques that can be used in studies involving biofilm-specific polysaccharides is discussed.